Skip to Main Content »

1-800-359-7717

Lights for 1967 Chevy Camaro Rs

0  Items Total: $0.00 View Cart Checkout

You're currently on:

1967 CHEVY CAMARO RS

Search Term: 'All Parts'
Category: 'Lights'
Vehicle: '1967 CHEVY CAMARO RS'

Items 1 to 28 of 89 total Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. Next
Show per page
View as: Grid  List  Sort by
Best Sellers
Camaro Headlight Retaining Ring, 1967-1975 Part # HH-15
Reproduction Of Original Round Inner Ring Which Holds The Headlight Bulb To The Headlight Bucket 1" Width 2 Required Per Car Comes With Screws With Oval Hole Replaces GM #5950248 Headlight bezels on your 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, or 1975 Camaro take several hits over the years, leaving them bruised and battered. Harsh weather conditions damage your headlight bezels while road dirt and rocks beat and sandblast the finish away. Over time, your Chevrolet Camaro bezels start looking tired, and nothing looks worse on a fresh restoration than tired and worn headlight bezels. Rick's Camaros has the solution for you! Our Chevy Camaro headlight sealed beam retaining ring is an accurate reproduction, has correct ring width, and is in original high polished stainless material. The round inner ring holds the headlight bulb to the headlight bucket. From race, restoration or daily drivers, Rick's Camaros is always sourcing from the world’s top manufacturers to bring you the very best 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, and 1975 Camaro headlight bezels possible. Learn More
$12.99 ea.

Add to Wishlist

Camaro Headlight Adjusting Screw & Nut, 1967-1968 Part # HH-14
Reproduction Of Original Correct Screw and Nut Set Set Covers One Headlamp 4 Required Per Car Fits 1967 Or 1968 1st Gen Camaros The headlights are vital on your 1967 or 1968 first generation Camaro, especially when driving at night or in harsh weather conditions. It is possible over time that your head light assembly can become loose, and you may have misplaced your adjusting screw. Each headlamp required an adjusting screw and nut to keep it secure and ready to use while driving. Rick's Camaros offers this new headlight adjusting screw and nut for your F-Body, ready to install in your headlight. This set covers one of your Camaro's head lamps, however four are required to complete your car. Go ahead and get enough for each of your headlights so you can rest assured while on the road. From racers, show cars, hot rods, and daily drivers, you can trust Rick's Camaros for all of your restoration and replacement needs for your 1967 or 1968 1st gen Camaro! Learn More
$1.50 Set

Add to Wishlist

Camaro, License Lamp Assembly, Reproduction, 1967-1969 Part # LP-38
Best Quality Reproduction License Lamp Assembly 12" Brown Lead Wire With Grommet Black Connector & White Lens Gasket Gold Cad Plated Housing Crystal Clear Lens With Correct Lettering Script Includes Plated Screws For 1st Gen Models Camaro clear plastic parts do one of two things over time, they can turn milky and hazy or completely fall apart. Camaro gold cad plating will turn chalky over time. Both of these are main components of your Camaro license lamp assembly. Rick's Camaros offers this superior reproduction 1967, 1968 or  1969 first generation Camaro license lamp assembly to replace that ugly, rusted one on your Camaro. This reproduction assembly includes cad plated housing, socket with bulb, brown color lead wire with grommet and correct black terminal end, crystal clear lens with script, white colored lens gasket, and plated screws. This license lamp assembly is just another one of the best quality parts Rick's Camaros brings you to keep your Camaro Super Sport (SS), Rally Sport (RS), Z28 or Standard correct and looking great always at the best possible price. From racers, show cars, hot rods, and daily drivers, you can trust Rick's Camaros for your restoration and replacement needs for your 1967, 1968, or 1969 1st gen Camaro! Learn More
$21.99 ea.

Add to Wishlist

Camaro Headlight Door Limit Switch, Rally Sport (RS), 1967 Part # RS-23
Technically Correct Limit Switch Assembly Correct Lettering & Weatherproofing Attached Ground Wire With Shrink Tubing As Original Made & Assembled In USA 4 Required Per Car For Rally Sport (RS) Models The 1967 Camaro Rally Sport hide-away headlight system can be one of the toughest to work on because of its intricate nature and high failure rate. The headlight doors are controlled with two of these limit switches on each headlight door. If they are malfunctioning or adjusted improperly, the door may not stop in the right location or run the headlight door motor until the circuit breaker pops. Replace yours today with the best part from Rick's Camaros. This technically correct headlight door limit switch comes with the attached ground wire with correct serrated eyelet, and is connection shrink tubed as the original. Two are required per headlight, so be sure to get two if you need to! Trust Rick's Camaros for all of your restoration and replacement needs for your 1967 1st gen Camaro RS!   NOTE: Limit switches must be installed with the ground wire down or the switch will ground the wrong side of the circuit and send the wrong signal to the relays causing system malfunction. Learn More
$14.99 ea.

Add to Wishlist

Camaro Headlight Sealed Beam, 1967-1981 Part # HH-18
High Quality Original Style Replacement 50 Watts Low Beam, 60 Watts High Beam Sealed Beam Dual Filament Sold Each Two Required per Car Correct T3 Headlights Available as our Part # LT-30 Is it time to refurbish the headlights on your beautiful 1967-1981 Chevrolet Camaro? Rick's Camaro's offers this replacement sealed beam headlight with the budget-minded Camaro restorer in mind. Not everyone needs technically correct T-3 headlights in their Chevy Camaro so Rick's found this bulb from a major replacement headlight manufacturer with that in mind. Don't drive down that long, dark road coming home from your local cruise in without the proper lighting in the front of your Camaro. Replace your old headlights on your 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981 Camero today with quality parts from Rick's Camaro. Learn More
$9.99 ea.

Add to Wishlist

Camaro Headlight Retaining Ring Mounting Screw Set, 1967-1973 Part # HH-17
Correct Reproduction Retains Headlamp Retaining Ring HH-15 1 Kit Required Per Car   Headlight bezels on your 1967, 1968, 1969, 1970, 1971, 1972, or 1973 Camaro take several hits over the years, leaving them bruised and battered. Harsh weather conditions damage your headlight bezels while road dirt and rocks beat and sandblast the finish away. Over time, your Chevrolet Camaro bezels start looking tired, and your headlight retaining ring has trouble holding the headlight bulb to the headlight bucket. Whether the screws have gotten lost are broken, the retaining ring will no longer be able to retain your Camaro's headlight. Rick's Camaros has the solution for you! Our Chevy Camaro headlight retaining ring mounting screw set is a kit made up of six mounting screws. This set is all you need to keep your headlight bulbs secure.. From race, restoration or daily drivers, Rick's Camaros is always sourcing from the world’s top manufacturers to bring you the very best 1967, 1968, 1969, 1970, 1971, 1972, or 1973 Camaro headlight bezels possible. Learn More
$2.99 Set

Add to Wishlist

Camaro Back-Up Light Lens, Rally Sport (RS), 1967-1968 Part # PL-9
Best Quality Reproduction RS Backup Light Lens Officially Licensed GM Restoration Part Crystal Clear Lens  Correct Lettering and Script Unlike Others Fits Rally Sport Cars Only Sold Indidivually 1967-1968 Camaro Rally Sport back up lenses take a beating over time. Camaro back up lens often turn hazy, crack or simply crumble leaving that freshly painted or daily driven Camaro not looking so sharp. Also, broken, missing or faded Camaro back up lenses post a critical safety hazard and may be required in most states to pass inspection. Rick's Camaros is proud to offer the highest quality accurate reproduction back up lens on the market. Injected molded using only the most modern material ensures that your Camaro will sparkle for years to come. This back-up light lens also includes the correct lettering and script like your original. Replace your 1967-1968 RS Camaro lenses today with this reproduction back up lens from Rick's Camaros. Learn More
$8.99 ea.

Add to Wishlist

Camaro Taillight Housing To Body Gaskets, Molded, 1967-1968 Part # WS-98
Best Quality Reproduction Tail Light Housing Gaskets Heavy Density Injection Molded Thick Rubber Seal As Original Seals Are Molded To Fit The Bezel Just Like The Originals Seals Much Better Than Generic Foam Gaskets Sold As A Pair The old cheap foam taillight housing gaskets on your 1967 or 1968 Camaro have most likely won't protect the space between your taillight and body for a long time. They can become worn down from the weather, deteriorating and leaving your trunk and spatter paint exposed to rainwater. Rick's Camaros wants to ensure your F-Body's rear section is protected, by offering these accurate reproduction taillight housing to body gaskets. These gaskets are the best defense against the elements because they were actually designed to fit the bezel and tail pan to seal like the originals. These are made from heavy density molded rubber, with a far superior sealing and appearance to the cheap foam gaskets. Don't wait to replace your tail light housing gaskets, and feel confident while on the road. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967 or 1968 1st gen Camaro! Learn More

Was: $23.99 pr.

Now: $19.99 pr.

Add to Wishlist

Camaro Taillight Lens Gaskets, 1967-1968 Part # WS-51
Dense foam correct color lens to housing seals. RH and LH pair. Learn More
$6.99 pr.

Add to Wishlist

Camaro Parking Light Lens To Housing Gaskets, Rally Sport (RS), 1967-1968 Part # WS-30
Best Quality Reproduction Parking Lens Gasket Officially Licensed GM Restoration Part Correct Thick Die-Cut Gray Rubber Gray Rubber Keeps The Reflector From Appearing Dark Sold As A Pair For Rally Sport Models Some of the reproduction Camaro park light housing assemblies come with a black gasket between the housing and the lens. This causes the reflector to reflect black, making the lens appear very dark. Rick's Camaros now has the correct gray parking light lens to housing gaskets for your RS park light housings. These gaskets will keep your lenses bright just like they were when your Camaro rolled off of the assembly line. With correct thick die cut gray rubber, this pair of parking light to housing gaskets will keep the reflector from appearing dark on your Rally Sport F-Body. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967 or 1968 1st gen Camaro RS! Learn More
$4.99 pr.

Add to Wishlist

Camaro Parking Light Lens, Rally Sport (RS), 1967-1968 Part # PL-4
Officially Licensed GM Restoration Part Reproduction of Original Sharp & Crystal Clear Acrylic Lens Correct "Guide" Lettering and Script For Rally Sport Models Sold Individually Made In USA Rick's Camaros is proud to bring you superior quality reproduction park light lens for your 1967 or 1968 Camaro you can buy. Over time, your Camaro park lenses can turn a gold-brown color that really affects the brightness of your lighting. Sometimes your original F-Body park lenses simply crumble leaving you with an unsightly exposed bulb and leaving your housing open to rust or electrical issues. Rick's Camaros offers this officially GM licensed superior reproduction parking light lens for your Rally Sport F-Body. This crystal clear faceted acrylic lens has the correct guide lettering and script, and is sold as a pair to complete your driver's and passenger's side park lights. From daily driver, show to hot rod, buy the best for your 1969 Camaro with park lamp lenses from Rick's Camaros. Rest assured your restoration will be done right! Learn More
$15.99 pr.

Add to Wishlist

Camaro License Plate Light Lens Gasket, 1967-1972 Part # WS-49
Reproduction license lamp gasket in correct color and material. Quality made in the USA. Learn More
$2.99 ea.

Add to Wishlist

Camaro Taillight Lens, Rally Sport (RS), 1967 Part # PL-12
Accurate Reproduction Officially Licensed GM Restoration Part High Quality Red Lens Sold Individually Correct Scripts & Text A Must Have For Any 1967 RS Camaro These quality reproduction 1967 Camaro taillight lenses are a must for any F-Body non Rally Sport Camaro. Over time, your old lenses will become washed out and make your Chevy Camaro an easy target for a rear end collision (the tail lights are already mounted low enough as it is!). The rear bulb housings are made of plastic and become extremely prone to cracking and flaking as they get more worn down. Rick's Camaros offers these accurate reproduction red taillight lenses, made of high quality materials with correct scripts and text, and in correct colors. Replace your old 1967 1st gen Chevrolet Camaro tail lights today with this quality reproduction from Rick's Camaros and make your Camaro stand out at night. Learn More
$16.99 ea.

Add to Wishlist

Camaro Parking Light Lens Mounting Screws, Rally Sport (RS), 1967-1968 Part # HW-11
Accurate Reproduction High Quality Heavy Chrome Plating Shouldered Lens Screws With Correct Dimensions .675" Screw Length For Park Lights For Rally Sport Models Camaro park light screws are a must for any restoration, race car or daily driver. Don’t settle for a generic Philips head screws on your Camaro parking lights, these correct F-Body Camaro park light screws feature the proper non threaded shoulder to apply proper torque without crushing or cracking the park light lens. This accurate reproduction set of park light lens mounting screws have heavy chrome plating and are correct with proper fine thread to ensure that they will not cross thread and strip your Camaro's park light housing. Don’t settle for cheap hardware store screws when it comes to your expensive reproduction or original park light lenses and park light bezels. Trust Ricks Camaros for all of your restoration and replacement needs for your 1967 or 1968 Camaro RS!  Learn More
$5.99 Set

Add to Wishlist

Camaro Back-Up Light Housing To Body Gaskets, Molded, Rally Sport (RS), 1967-1968 Part # PS-7
Officially Licensed GM Restoration Parts Injection Molded Black Neoprene Rubber Completes Installation Of Back-Up Housing To Body Gaskets Sold As A Pair For Rally Sport Models When replacing the backup lamp housings on your 1967 or 1968 Rally Sport Camaro, it could be beneficial to replace all the components and hardware involved to give your F-Body a brand new feel. The back-up light housing seals can become worn over time, starting to deteriorate and crack. Rick's Camaros offers this pair of new molded black seals that will complete the installation of your backup light housing to the lower valance panel. These officially GM licensed seals are made from injection molded neoprene rubber and will fit both the driver's and passenger's sides of your Camaro RS. Don't settle for the cheaper foam alternative when these molded rubber gaskets are guaranteed to last. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967 or 1968 1st gen Camaro RS! Learn More
$6.99 pr.

Add to Wishlist

Camaro Back-Up Light Lens Gaskets, Rally Sport (RS), 1967-1968 Part # WS-34
Best Quality Reproduction Back-Up Lens Gasket Officially Licensed GM Restoration Part Original Style Correct Thick Die-Cut Gray Rubber Gray Rubber Keeps The Reflector From Appearing Dark Sold As A Pair For Rally Sport Cars Some of the reproduction 1967 or 1968 Camaro backup light housing assemblies come with a black gasket between the housing and the lens. This causes the reflector to reflect black, making the lens appear very dark. Critical for a proper weather-proff seal, your Camaro's park light gaskets keep water, mud, and other debris from entering your back up light housing, which could cause rust, grime build-up, and electrical problems. Rick's Camaros now has these correct gray rubber backup light lens to housing gaskets for your RS backup light housings. These gaskets will keep your lenses bright just like they were when your Camaro rolled off of the assembly line. With correct thick die cut gray rubber, this pair of back-up light to housing gaskets will keep the reflector from appearing dark on your Rally Sport F-Body. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967 or 1968 1st gen Camaro! Learn More
$6.99 pr.

Add to Wishlist

Camaro Headlight Bucket, Left, 1967-1969 Part # HH-7
Best Quality Reproduction Camaro Headlight Bucket Stamped Steel Construction Black EDP Coated To Ensure Rust Prevention Fits Driver's (Left) Side Replaces GM #5957684 Camaro headlight buckets are right out front and prone to rust from weather conditions, and crash collision damage. Rick's Camaros offers only the best parts at the best possible price. If you need a head light bucket for the sealed beam on your 1967, 1968 or 1969 standard Camaro, Super Sport (SS), Rally Sport (RS) or Z28 coupe or convertible, we have it in stock and ready to ship. This headlamp capsule bucket is made from stamped steel and is EDP coated to ensure that you will not have to worry about future rust problems. This bucket will fit the driver's side of your F-Body. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968, or 1969 1st gen Camaro! NOTE: The 69 RS Camaro only uses a RH bucket on the left (driver's) side, and a LH bucket on the right (passenger's) side! Learn More
$28.99 ea.

Add to Wishlist

Camaro Headlight Bucket, Right, 1967-1969 Part # HH-8
Best Quality Reproduction Camaro Headlight Bucket Stamped Steel Black EDP Coated To Ensure Rust Free Delivery Fits Passenger's Side Replaces GM #924535 Being placed right on the front of the car, your headlight buckets on your 1967, 1968, or 1969 Camaro are heavily prone to rust and collision damage. Being so susceptible to damage and being one of the first things that people see on your car, damaged headlight buckets can really take away from the overall great look of your Camaro. Rick's Camaros offers only the best parts at the best possible price, and this headlight bucket, for the passenger's side is a high quality reproduction of your original headlight part, in stamped steel and EDP (Electro Deposit Primer) coated to ensure a rust resistant finish. If you need a head light bucket for the sealed beam on your 1967, 1968 or 1969 1st gen standard Camaro, Super Sport (SS), Rally Sport (RS) or Z28 coupe or convertible, Rick's Camaros is here to give you what you need. Trust Rick's Camaros for all of your restoration and replacement needs! NOTE: The 69 RS Camaro only uses a RH bucket on the left (driver's) side, and a LH bucket on the right (passenger's) side! Learn More
$28.99 ea.

Add to Wishlist

Camaro License Plate Light Lens, 1967-1969 Part # PL-20
Officially Licensed Reproduction Lens Attaches To License Plate Original Lettering & Correct Script Crystal Clear Acrylic Lens As Original Made In USA Clear plastic parts do one of two things over time: they can turn milky and hazy, or completely fall apart. Your 1967, 1968, or 1969 F-Body's license plate light lens can suffer from these issues, making it hard to identify your car late at night. Rick's Camaros offers this officially GM licensed crystal clear acrylic license plate light lens to replace the old original on your Camaro. This lens includes the correct embossed text and will easily apply to your Camaro's license plate. Don't wait to restore your Chevy and stay safe on the road. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968, or 1969 1st gen Camaro! Learn More
$6.99 ea.

Add to Wishlist

Camaro Headlight Bezels, Left & Right, Rally Sport (RS), 1967-1968 Part # HB-4P
Best Quality Reproduction RS Headlight Bezels Officially Licensed GM Restoration Part OE Thickness Anodized Aluminum Bonded Black Matte Finish Fits Boths Left & Right Headlamps For 1967 & 1968 Rally Sport (RS) Camaro Only 1967-1968 Camaro Rally Sport (RS) headlight bezels take hits over the years, leaving them less than perfect. Harsh weather conditions batter your Camaro headlight bezels while road dirt and rocks beat and sandblast the finish away. Over time, your 1967-1968 Chevrolet Camaro headlight bezels start looking tired, and nothing looks worse on a fresh restoration than worn headlight bezels. Rick's Camaro has the answer for you! Our Chevy Camaro headlight bezels are made from premium grade polished aluminum, stamped to proper shape with correct automotive anodizing to bring the best and brightest finish. Correct black inlay is carefully applied to make your officially GM licensed Camaro headlight bezels pop. From racers, show cars, hot rods, and daily drivers, you can trust Rick's Camaros for all of your restoration and replacement needs for your 1967 or 1968 Camaro RS! Learn More
$79.99 pr.

Add to Wishlist

Camaro Headlight Door Motor, Right, Rally Sport (RS), 1967 Part # RS-20
Quality Reproduction of Original Steel Drive Train Solid State Electronics Correct Electrical Plug Original Wiring Connector & Mount Plate Included Fits Passenger's (Right) Side 1 Year Manufacturer's Warranty Originally, 1967 Rally Sport Camaros were notorious for failures with their RS hide-away headlight systems. The headlight motors are usually the first to go with plastic gears and antiquated electronics. Rick's Camaros is happy to offer the latest generation headlight motor assembly with sealed housings and an all metal precision gear train. The original wiring connector and mount plate are also included and already installed. This headlamp door motor will fit the passenger's side of your F-Body. Replace your old RS headlight motors with ours today and stop opening and closing those RS headlight doors by hand! Trust Rick's Camaros for all of your restoration and replacement needs for your 1967 1st gen Camaro RS! Learn More
$118.99 ea.

Add to Wishlist

Camaro Headlight Door Motor, Left, Rally Sport (RS), 1967 Part # RS-21
Quality Reproduction of Original Steel Drive Train Solid State Electronics Correct Electrical Plug Original Wiring Connector & Mount Plate Included Fits Driver's (Left) Side 1 Year Manufacturer's Warranty Originally, 1967 Rally Sport Camaros were notorious for failures with their RS hide-away headlight systems. The headlight motors are usually the first to go with plastic gears and antiquated electronics. Rick's Camaros is happy to offer the latest generation headlight motor assembly with sealed housings and an all metal precision gear train. The original wiring connector and mount plate are also included and already installed. This headlamp door motor will fit the driver's side of your F-Body. Replace your old RS headlight motors with ours today and stop opening and closing those RS headlight doors by hand! Trust Rick's Camaros for all of your restoration and replacement needs for your 1967 1st gen Camaro RS! Learn More
$118.99 ea.

Add to Wishlist

Camaro Headlight Door Limit Switch Brackets Mounting Screw Set, Rally Sport (RS), 1967-1969 Part # HW-63
67 RS limit switch bracket mounting screw set. Mounts all 4 brackets. Correct machine thread round Phillips head. Learn More
$2.99 Set

Add to Wishlist

Camaro Taillight Housing To Body Gaskets, 1967-1968 Part # WS-47
Reproductions Of Original Die Cut, Heavy Density Fits RH or LH Available As Pair   The tail light housing to body gaskets on your 1967 or 1968 Camaro are used to seal the area between the tail lamp assembly and the body of your Camaro. These gaskets are needed to prevent damage to your tail lights and the space connecting the body, which can be susceptible to weather conditions. Rick’s Camaros is happy to offer new reproduction tail light housing to body baskets, as a set of two, to replace your previous gaskets. These are die cut, black foam gaskets, which will fit both the driver’s side and passenger’s side. Trust Rick’s Camaros for all of your restoration and replacement needs for your 1967 or 1968 Camaro. Learn More
$7.99 pr.

Add to Wishlist

Camaro Back-Up Light Housing, Left, Rally Sport (RS), 1967-1968 Part # PK-10
Accurate Reproduction Officially Licensed GM Restoration Part Chrome Diecast With White Enamel Inlay Correct In Every Way Includes Wiring, Rubber Boot, Grommet, Bulb, & Connector Fits Driver's Side For Rally Sport Models Ricks Camaros is proud to bring you the best show quality reproduction back up light housing for your 1967 or 1968 Camaro you can buy. Over time, your Camaro back-up lenses can turn a gold-brown color that really affects the brightness of your lighting. The housing can also become faulty, making your lamps prone to failure while on the road. Sometimes your original F-Body Camaro back-up lamps simply crumble leaving you with an unsightly exposed bulb and leaving your housing open to rust or electrical issues. Rick's Camaros offers this officially GM licensed back up light housing assembly for the driver's side of your Rally Sport F-Body. Each 1967 or 1968 Camaro back-up light housing is an accurate chrome die-cast reproduction with white enamel inlay that includes wiring, rubber boot, grommet, bulb, and connector. From daily driver, show to hot rod, buy the best for your 1967 or 1968 Camaro with park lamp assembly from Rick's Camaros. Rest assured your restoration will be done right! Learn More
$38.99 ea.

Add to Wishlist

Camaro Headlight Door Relay Board Assembly, Rally Sport (RS), 1967 Part # RS-86
Complete Reproduction Relay Board Assembly Officially Licensed GM Restoration Part Contains Correct Relays & Circuit Breaker Unlike Others Fully Assembled Die Stamped Steel Correct 10 Amp Circuit Breaker With Nuts All Mounted With Correct Plated Hardware For Rally Sport (RS) Models Rick’s Camaros offers this 1967 Camaro RS Relay board which comes with a correct die stamped relay plate, Three correctly stamped relays with “Delco Remy” on the case and “858” on mounting bracket, and correct 10 amp circuit breaker with “”10A” ink stamp. All pieces on Rick’s 1967 Camaro RS relay board are mounted with technically correct hardware for the demanding restorer. This relay board assembly is ready to mount on your RS fender and hook to your wiring harness straight out of the box. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967 1st gen Camaro RS!  Learn More
$89.99 ea.

Add to Wishlist

Camaro Taillight Housing Mounting Nut Set, 1967-1968 Part # TL-26
Reproduction Of Original Mounting Hardware Set Of 12 Attaches Taillight Bezel To Rear Body Panel   The tail light housing to body mounting nuts on your 1967 or 1968 Camaro are used to seal the area between the tail lamp assembly and the body of your Camaro. These mountaing materials are needed to prevent damage to your tail lights and the space connecting the body, which can be susceptible to weather conditions. Rick’s Camaros is happy to offer new reproduction tail light housing to body mounting nuts, as a set of twelve, to replace your previous mounting nuts. These attach your tail light bezel to the rear body panel of your Camaro, and are simple to install. Trust Rick’s Camaros for all of your restoration and replacement needs for your 1967 or 1968 Camaro. Learn More
$13.99 Set

Add to Wishlist

Camaro Back-Up Light Housing, Right, Rally Sport (RS), 1967-1968 Part # PK-9
Accurate Reproduction Officially Licensed GM Restoration Part Chrome Diecast With White Enamel Inlay Correct In Every Way Includes Wiring, Rubber Boot, Grommet, Bulb, & Connector Fits Passenger's Side For Rally Sport Models Ricks Camaros is proud to bring you the best show quality reproduction back up light housing for your 1967 or 1968 Camaro you can buy. Over time, your Camaro back-up lenses can turn a gold-brown color that really affects the brightness of your lighting. The housing can also become faulty, making your lamps prone to failure while on the road. Sometimes your original F-Body Camaro back-up lamps simply crumble leaving you with an unsightly exposed bulb and leaving your housing open to rust or electrical issues. Rick's Camaros offers this officially GM licensed back up light housing assembly for the passenger's side of your Rally Sport F-Body. Each 1967 or 1968 Camaro back-up light housing is an accurate chrome die-cast reproduction with white enamel inlay that includes wiring, rubber boot, grommet, bulb, and connector. From daily driver, show to hot rod, buy the best for your 1967 or 1968 Camaro with park lamp assembly from Rick's Camaros. Rest assured your restoration will be done right! Learn More
$38.99 ea.

Add to Wishlist

Items 1 to 28 of 89 total Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. Next
Show per page
View as: Grid  List  Sort by
1