Product Experts Available 1-800-359-7717

1967 CAMARO SS SPRINGS

Search Term: 'All Parts'
Category: 'Springs'
Vehicle: '1967 CHEVY CAMARO SS'
Items: 1 to 28 of 46 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. Next
Grid  |  List
Best Sellers
Camaro Rear Spring T-Bolt, For Cars With Mono Leaf Springs,1967-1969 Part # RC-468
Reproduction of Original For Cars with Mono-leaf Rear Leaf Springs Grade 8 Sold Each 8 Required per Car Correct Nut Set Available Separately as our Part # SS-232 For the demanding restorer Rick's First Generation offers this correct T-bolt for Camaros with Mono-leaf Rears. Mono-leaf rears use four T-bolts per side. Buy the best parts for your restoration at one place: Rick's First Generation.     Reproduction correct length T-bolt. 10 Bolt rears use eight T-Bolts. 12 bolt rears use four T-bolts and two U bolts. (Note: Racers may use four U-bolts for added strength). Learn More
$3.99 ea.
Camaro Rear Leaf Spring, Repair Approved, 1967-1981 Part # MS-1938
Highest Quality Reproduction Leaf Spring For Camaro Some Applications Licensed Reproduction Front Eye Bushing Installed Available For Original Mono Leaf Or Multi Leaf Rears For Small Block Or Big Block The best way to fix the sagging rear of your Camaro is to replace the rear leaf springs. Many Camaros out on the road today have the rear end sitting much lower than the front. The rear of your classic 1967, 1968, 1969, 1970, 1971, 1972,1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980 or 1981 Chevy Camaro is supposed to be level with the front end, not hanging down to the pavement. Here at Rick's Camaros we know not everybody is looking for an expensive show correct set of leaf spring and just want a high quality replacement for their Camaro. Rick's Camaros offers a selection high quality replacement leaf springs that will level your ride height and not cost an arm and a leg. Our leaf springs come in both mono leaf and multi leaf styles to get your 1967, 1968,1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980 or 1981, Rally Sport (RS), or Super Sport (SS), Z28, Type LT or Berlinetta sitting pretty again. Learn More
Camaro Leaf Spring Front Mounting Bracket J-Nut & Bolt Set, 1967-1981 Part # 33-10646
Stock Replacement Correct Black Oxide Plating Stronger Than Imported Reproductions 6 J-Nuts Per Set 6 Bolts Per Set Your 1967-1981 Camaro's J-nuts on the front leaf spring cup are constantly exposed to adverse weather conditions, meaning they usually end up so rusted that the spring mount bolts will strip out the threads on the bolt, or even break the clip. Rick's Camaros offers this leaf spring front mounting bracket set, complete with J-nuts and bolts, to replace your old rusted J-nuts and keep your leaf springs working smoothly. Matching factory specifications, this set is actually stronger than the imported reproductions, and has correct black oxide plating. This set contains six J-nuts and six bolts for your mounting bracket project. Don't wait until you have to them the J-nuts out in the middle of replacing your leaf springs; get this mounting kit today! Trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, or 1981 Camaro!   Learn More
$18.99 Set
Camaro Rear Spring U-Bolts, For Cars With Multi-Leaf Springs, 1967-1981 Part # SS-23
Functional Quality Replacement For Cars with Multi-leaf Rear Leaf Springs Correct Diameter Longer Bolt and Thread Area For Different Applications Sold as a Pair For the budget-minded Camaro restorer Rick's First Generation offers this pair of U-bolts for Camaros with Multi-leaf Rears. Multi-leaf rears use one U-bolt per side and two T-bolts (our Part # RC-468) per side. Some restorers choose to use two U-bolts on either side for maximum strength. Buy the best parts for your restoration at one place: Rick's First Generation.   Learn More
$10.99 pr.
Camaro Leaf Spring Front Eye Bushing, 1967-1981 Part # SS-6
Best Quality Reproduction Leaf Spring Bushing Officially Licensed GM Restoration Part Original Factory Appearance With QS-9000/ISO/TS-16944 Manufacturing Fits Front Eyelet Of Leaf Spring Two Required Per Camaro Camaro suspension parts like this leaf spring front eye bushing are prone to fail over the years. Rick's offers the best parts at the best price for your Camaro and this leaf spring front eye bushing is no exception. If you need replacement bushings for your standard Camaro coupe or convertible, Super Sport (SS), Rally Sport (RS), Type LT, Berlinetta or Z28, look no further than Rick's Camaros. Fits: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980 or 1981 Learn More
$19.99 ea.
Camaro Leaf Spring Front Eye Bushing Mounting Hardware, 1967-1981 Part # SS-43
Reproduction of Original Hex Head, High Grade, Fine Thread Bolt Sold Each Two Required per Car Leaf Spring J-nuts Available Separately as our Part # RC-469 Correct Leaf Spring Bolt Set Available Separately as our Part # RC-470 Quality reproduction of the front eye bushing leaf spring bolt. This bolt passes through the front eye bushing of the leaf spring attaching it to the front leaf spring cup. The threads are exposed to the elements and the bolt is usually destroyed trying to remove it. Purchase your front eye bushing leaf spring bolts today from Rick's First Generation before you find out you need them in the middle of your spring install. Learn More
$4.99 ea.
Camaro Leaf Spring Front Mounting Bracket J-Nuts, 1967-1981 Part # RC-469
Stock Replacement Correct Black Oxide Plating Stronger Than Imported Reproductions (6) Hex Bolts With Captured Washer (6) J-Nuts per Set One Set Required Per Car   Great stock replacement for J-nuts in the body of the Camaro used to hold the front leaf spring cup. These J-nuts are constantly exposed to elements which means they are usually rusted so badly that the spring mount bolts will strip out the threads or break the clip. Order your replacements today from Rick's First Generation before you have to cut them out in the middle of replacing your leaf springs. Learn More
$15.99 Set
Camaro Coil Spring Spacer, Front, 1967-1981 Part # SS-220
Used By The Factory To Raise The Front Height On Camaros 3/8" Spacer Lifts Camaros Up From 3/4" To 1-1/2" Fits Between Front Lower Control Arm & Spring Used by assembly line workers to adjust the front end height on Camaros, this high impact black plastic coil spring spacer is found between the spring and the lower control arm. Most Camaros used two, some have been found with this spacer on only one side. In most cases, this 3/8 coil spring spacer will lift your Camaro from 3/4" to 1-1/2”. For the best performance and quality, count on Rick's to get you to the finish line. Learn More

Was: $14.99 ea.

Now: $13.99 ea.
Camaro Leaf Spring Shackle Kit, Show Correct, 1967-1970 Part # SS-70
Restoration Correct Camaro Shackle Officially Licensed GM Restoration Part Correct Shackle Side Plates Stamped From Medium Carbon Steel & Zinc Plated  Technically Correct Shouldered Through Bolts & Marsden Nuts Two Required Per Car   Is the rear suspension on your 1967-1970 Camaro starting to wear down? Let Rick's Camaro help you replace the shackles. The shackle assembly mounts the rear of the leaf spring to the frame rail hanger. Over time the rubber bushings deteriorate and can't provide the support and impact absorption you need. While not technically correct for judging, this replacement will give great results with your rear suspension project on your 1967, 1968, 1969 or 1970 Camaro Standard, Rally Sport (RS), Super Sport (SS) or Z28. Trust Rick's for all of your suspension needs! Learn More
$37.99 ea.
Camaro Coil Spring Set, For Cars With Small Block & Without Air Conditioning, 1967-1969 Part # SS-40
Helps Maintain Proper Ride Height Helps Maintain Proper Alignment Eliminates Unnecessary Wear On Tires And Suspension Parts  Made In USA              Original 1967, 1968, 1969 Camaro coil springs often become very weak and may cause your car to sit unevenly, resulting in poor appearance and handling. These 1967, 1968, 1969 Camaro reproduction coil springs have been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit and function will work superbly for your restoration. In addition, using reproduction coil springs from Rick's Camaros will add authenticity and value to your 1967, 1968, 1969 Camaro. Learn More
$89.99 pr.
Camaro Leaf Spring Mounting Bracket, Left, Front, 1967-1969 Part # SS-63L
New nice reproduction. Mounts to the underbody with three bolts, then front of rear leaf spring bolts to bracket. LH (driver side). Learn More

Was: $34.99 ea.

Now: $31.99 ea.
Camaro Leaf Spring Mounting Bracket, Right, Front, 1967-1969 Part # SS-63R
New nice reproduction. Mounts to the underbody with three bolts, then front of rear leaf spring bolts to bracket. RH (passenger side). Learn More

Was: $34.99 ea.

Now: $29.99 ea.
Camaro Coil Spring Set, For All Cars With Big Block, 1967-1969 Part # SS-24
Reproduction Of Original Helps Maintain Proper Ride Height Helps Maintain Proper Alignment Eliminates Unnecessary Wear On Tires And Suspension Parts   Made In USA             Original 1967, 1968, 1969 Camaro coil springs often become very weak and may cause your car to sit unevenly, resulting in poor appearance and handling. These 1967, 1968, 1969 Camaro reproduction coil springs have been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit and function will work superbly for your restoration. In addition, using reproduction coil springs from Rick's Camaros will add authenticity and value to your 1967, 1968, 1969 Camaro. Learn More
$89.99 pr.
Camaro Leaf Spring Front Mounting Bracket Bolt Set, 1967-1981 Part # RC-470
Correct Reproduction of Original Black Oxide Plated (6) Hex Head, Type CA Point Bolts With Captured Washer One Set Needed per Car Leaf Spring J-Nuts Available Separately As Our Part # RC-469   Here they are! These bolts are the ones which attach the front leaf spring cup to the body of your Camaro. You remember the ones you had to cut off with an acetylene torch to get the leaf springs out because of all the rust? Leaf spring bracket bolts are constantly in contact with the elements and Rick's First Generation offers this correct reproduction to make your restoration easier. Learn More
$6.99 Set
Camaro Rear Spring U-Bolt & T-Bolt Nut Set, Tall, 1967-1969 Part # SS-232
Correct Reproduction of Original Silver Cad Plated Hex Nut With Beveled Top 3 Dimples on Hex Sides 6 Dots on Beveled end Set of 8 See More Photos for Close up Detail For the demanding restorer Rick's First Generation offers this correct set of nuts for Camaro T-bolts or U-bolts. Multi-leaf rears use one U-bolt (our Part # SS-231) per side and two T-bolts (our Part # RC-468) per side. Some restorers choose to use two U-bolts on either side for maximum strength. Mono-leaf rears use eight T-bolts. Buy the best parts for your restoration at one place: Rick's First Generation. Learn More
$17.99 Set
Camaro Leaf Spring Shackle Assembly, 1967-1970 Part # SS-28
Restoration Correct Leaf Spring Shackle Kit Technically Correct Shouldered Through Bolts & Marsden Nuts Two Required Per Car   Is the rear suspension on your 1967-1970 Camaro starting to wear down? Let Rick's Camaro help you replace the shackles. The shackle assembly mounts the rear of the leaf spring to the frame rail hanger. Over time the rubber bushings deteriorate and can't provide the support and impact absorption you need. While not technically correct for judging, this replacement will give great results with your rear suspension project on your 1967, 1968, 1969 or 1970 Camaro Standard, Rally Sport (RS), Super Sport (SS) or Z28. Trust Rick's for all of your suspension needs!     Learn More
$32.99 ea.
Camaro Mono Leaf Spring Mounting Kit, 1967-1969 Part # SS-98
Good Quality Reproduction Camaro Mono Leaf Springs Install Kit For Mono Leaf Spring Camaro Only Includes High Quality Major Components To Make Leaf Spring Installation A Breeze Not Concerned About 100% Show Correct Leaf Spring Parts? This Is The Leaf Spring Installation Kit For You! Kit Includes: (2) Rear Shackle Kits (Complete with Bolts, Lock Nuts, Bushings & Plates) (2) Upper & Lower Rubber Mono-Leaf Spring Pads (8) Shock Plate T-bolts & Nuts (2) Front Eye Bushing Through Bolts & Lock Nuts (6) Front Spring Perch Bolts With Captured Washers & J-nuts  This Camaro reproduction mono-leaf spring mounting kit is a must have for your 1967, 1968 or 1969 Camaro restoration. Don't trust 40+ year old rubber bushings or spring pads to secure your Camaros rear leaf springs. Buy the best parts for your standard Camaro, Super Sport (SS), Rally Sport (RS) or Z28 from Rick's Camaros and know you are getting the best parts for your Camaro restoration at the best possible price. NOTE: The items contained in this kit are not the same technically correct, show quality parts Rick's offers separately.   Learn More

Was: $103.99 Kit

Now: $89.99 Kit
Camaro Mono Leaf Spring Mounting Pads, 1967-1969 Part # SS-16R
Reproductions Of Original Includes Two Upper & Two Lower Rubber Rear End Spring Mounting Pads For Mono Leaf Rear Ends These Camaro reproduction mono leaf spring mourning pads have been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit, finish and function will work superbly for your restoration. In addition, using reproduction mono leaf spring mounting pads from Rick's will add authenticity and value to your Camaro. Learn More
$21.99 Set
Camaro Polyurethane Multi Leaf Spring Mount Pads, 1967-1969 Part # UR-6
Upgrade Of Original For Multi Leaf Rear Suspension Cars Only Decreases Suspension Deflection Your Choice Of Black Or Red Made In USA Lifetime Manufacturer’s Warranty Historically, the Camaro was really happy when going in a straight line. However, the SCCA/Trans-am Series guys really had to tweak the suspension to make the Camaro carve the corners. Times have changed! Rick’s offers these polyurethane rear spring mount pads to help your Camaro really handle. Don’t feel like you are driving a boat down the road! Replace your rear spring mount pads with this polyurethane set from Rick’s today and tighten up your suspension. Learn More
$26.99 Set
Camaro Coil Spring Set, For Cars With Small Block & Air Conditioning, 1967-1969 Part # SS-147
Reproduction Of Original Helps Maintain Proper Ride Height Helps Maintain Proper Alignment Eliminates Unnecessary Wear On Tires And Suspension Parts               Original 1967, 1968, 1969 Camaro coil springs often become very weak and may cause your car to sit unevenly, resulting in poor appearance and handling. These 1967, 1968, 1969 Camaro reproduction coil springs have been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit and function will work superbly for your restoration. In addition, using reproduction coil springs from Rick's Camaros will add authenticity and value to your 1967, 1968, 1969 Camaro. Learn More
$95.99 pr.
Camaro Leaf Spring Conversion Kit, Mono To Multi, Detroit Speed, 1967-1969 Part # DS-64
Converts Your Original Mono Leaf Car To Multi-Leaf Configuration Includes U-Bolts, Hardcoated Steel Locating Pads, Aluminum Spacers, Washers & Nuts Learn More
$99.99 Kit
Camaro Coil Spring Set, Small Block, 2" Drop, Hotchkis, 1967-1969 Part # SS-545
Gray Powder Coated Finish 2" Lowered Front 600 lb/in Spring Rate Will Work For Big Block with Aluminum Heads Lower your Camaro 2" Below stock ride height to give it the right look, with an aggressive stance and a lower center of gravity. Our springs provide a firm, but not harsh ride. Each spring is precision wound using the highest quality steel. Use Rick's for your suspension upgrades. Learn More

Was: $229.99 pr.

Now: $209.99 pr.
Camaro Rear Spring U-Bolt & T-Bolt Nut Set, Tall, 1967-1969 Part # SS-235
Functional Quality Replacement Fine Thread Tall Nut Taller for Extra Gripping Strength Set of 8 Rick's First Generation offers this functional set of nuts for Camaro T-bolts or U-bolts for the budget-minded Camaro restorer. Multi-leaf rears use one U-bolt (our Part # SS-23) per side and two T-bolts (our Part # RC-468) per side. Some restorers choose to use two U-bolts on either side for maximum strength. Mono-leaf rears use eight T-bolts. Buy the best parts for your restoration at one place: Rick's First Generation.   Special fine thread tall nut, used for extra gripping length with rear end T-bolts and U-bolts. Set of eight does both sides. Learn More
$9.99 Set
Camaro Rear Spring U-Bolt & T-Bolt Nut, Tall, 1967-1969 Part # SS-223
Functional Quality Replacement Fine Thread Tall Nut Taller for Extra Gripping Strength Sold Each Set Available as our Part # SS-235 Rick's First Generation offers this functional nut for Camaro T-bolts or U-bolts for the budget-minded Camaro restorer. Multi-leaf rears use one U-bolt (our Part # SS-23) per side and two T-bolts (our Part # RC-468) per side. Some restorers choose to use two U-bolts on either side for maximum strength. Mono-leaf rears use eight T-bolts. Buy the best parts for your restoration at one place: Rick's First Generation. Learn More
$1.99 ea.
Camaro Leaf Spring Front Eye Bolts, 1967-1981 Part # 734188
Reproductions Of Original These Camaro reproduction leaf spring front eye bolts have been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit and function will work superbly for your restoration. In addition, using reproduction leaf spring front eye bolts from Eckler's will add authenticity and value to your Camaro. Learn More

Was: $16.99 pr.

Now: $13.99 pr.
Camaro Rear Leaf Busings, Multi-Leaf, Polyurethane, 1967-1969 Part # UR-10
Upgrade Of Original For Multi-Leaf Rear Suspension Cars Only Decreases Suspension Deflection Includes Bushings, Eye Bushing Sleeves & Special Grease Your Choice Of Black Or Red Made In USA Lifetime Manufacturer’s Warranty Historically, the Camaro was really happy when going in a straight line. However, the SCCA/Trans-am Series guys really had to tweak the suspension to make the Camaro carve the corners. Times have changed! Rick’s offers this polyurethane rear leaf bushing kit to help your Camaro really handle. Don’t feel like you are driving a boat down the road! Replace all of your rear suspension bushings with this polyurethane kit from Rick’s today and tighten up your suspension. Learn More

Was: $65.99 Kit

Now: $59.99 Kit
Camaro Rear Leaf Spring Bushings, Polyurethane, Mono Leaf, 1967-1969 Part # UR-9
Upgrade Of Original For Mono Leaf Rear Suspension Cars Only Decreases Suspension Deflection Includes Bushings, Eye Bushing Sleeves & Special Grease Your Choice Of Black Or Red Made In USA Lifetime Manufacturer’s Warranty Historically, the Camaro was really happy when going in a straight line. However, the SCCA/Trans-am Series guys really had to tweak the suspension to make the Camaro carve the corners. Times have changed! Rick’s offers this polyurethane rear leaf bushing kit to help your Camaro really handle. Don’t feel like you are driving a boat down the road! Replace all of your rear suspension bushings with this polyurethane kit from Rick’s today and tighten up your suspension. Learn More

Was: $65.99 Kit

Now: $59.99 Kit
Camaro Leaf Spring Rear Eye Bushing Set, 1967-1969 Part # SS-5
Technically correct OE quality bushings with identical appearance to factory originals, from Classic Suspension. Learn More
$47.99 Set
Items: 1 to 28 of 46 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. Next
Grid  |  List
2