Product Experts Available 1-800-359-7717

1967 CAMARO STANDARD CHEVY BODY PARTS

Search Term: 'All Parts'
Category: 'Body Parts'
Vehicle: '1967 CHEVY CAMARO STANDARD'

Items: 1 to 28 of 170 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next
Grid  |  List
Best Sellers
Camaro Floor & Trunk Drain Cover Plate, 1967-1981 Part # PP-13
Correct Stamp Steel Units Seals Holes In Floor And Trunk Pans Requires The Use Of Seam Sealer P/N 88-0187-3 For Proper Intallation 6 Require Per Camaro Your 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, or 1981 Camaro floor and trunk drain cover plates serve an important function during final body assembly. At the Fisher Body Plant, your Camaro body goes through a chemical bath which requires full submergence, and having holes scattered throughout the floor and trunk allows these chemicals to drain out when the body is pulled from the tank. Rick's Camaros knows the importance of a correctly restored Camaro and replacing old, leak, rusty or missing drain plates is just as important as any other detail. These reproduction drain plates are not merely replacement plates, but properly stamped units made from correct gauge steel and galvanized for added corrosion protection. Remember to apply the proper body seam sealer during installation, which is offered separately. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, or 1981 Camaro!   Learn More

Was: $4.99 ea.

Now: $2.99 ea.
Camaro Rear Bumper, Chrome, 1967-1968 Part # BU-26
High Quality Reproduction Rear Bumper Factory Style Triple Chrome Plating Includes Center Bracket    1967-1968 Camaro rear bumper from Ricks Camaros are made to be the trick in any restoration, daily driver or hot rod. Our 1967-1968 Chevy Camaro rear bumper are made with our specific needs in mind to insure stratification to the most demanding Camaro owner. Ricks Camaros has gone to great length with the manufacture that the highest manufacturing quality standards are retain along with the most authentic factory style triple chrome plating. Our 1967-1968 Camaro front bumpers for your F-Body are shipped bare without mounting hardware or bumper brackets. Simply unbolt your old rear bumper, reinstall all the hardware, or let us source it for you, and go. Ricks Camaros has sold thousands of these 1967-1968 Camaro bumpers and know what it takes to put you in the winner’s circle. Learn More

Was: $109.99 ea.

Now: $89.99 ea.
Camaro Hood Insulation Mounting Clip Set, 1967-1969 Part # HD-17
Best Quality Reproduction Hood Insulation Clips Injection Molded Fits Standard, SS and Cowl Induction Hoods Longer Clip Unlike Others 20 Piece Set Replaces GM #3909199 Rick's First Generation offers this correct style clip set for the hood insulation on your 1967, 1968, or 1969 Camaro. Other reproductions in the marketplace are too short and will pop out of the holes in your Camaros hood allowing your hood insulation to sag. This clip set will work for all hoods and keep your Camaro looking factory correct. This set of 20 insulation clips is injection molded, and is made with special tooling with slightly oversized studs to ensure firm attachment to the original hood. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968, or 1969 1st gen Camaro! Learn More
$22.99 Set
Camaro Fender To Radiator Support Bars, Chrome, 1967-1969 Part # FB-1
Quality Replacement Supports Radiator Core Triple Chrome Plated (4) Chrome Mounting Bolts Included Easy To Mount Sold As A Pair Replaces GM #3903480 (Right) & 3903479 (Left) Fender to radiator support bars in your 1967, 1968, or 1969 Camaro are installed between the fender and radiator on each side under the hood. While it may have been a part that you forgot about over the years, they are important because they help keep the front sheet metal of your Camaro from flexing during adverse driving conditions. Over time, they can rust and become worn, looking ugly and not properly supporting your radiator core. Rick’s Camaros is happy to offer these new reproduction chrome plated fender support bars in a shiny chrome finish, matching factory specifications and ready to replace your old and worn support bars. The triple chrome plating looks great as it complements your detailed engine compartment. These support braces are sold as a pair and also fit both the driver’s side and the passenger’s side under the hood, so you can count on a correct fit right off the bat. Don't wait another minute to keep your radiator core in your F-Body supported. Trust Rick’s Camaros for all of your replacement and restoration needs for your 1967, 1968, or 1969 1st gen Camaro! Learn More
$19.99 Set
Camaro Hood Insulation Pad, Cowl Induction, 1967-1969 Part # HD-16
Replacement Hood Insulation  Fits All Cars With Cowl Induction Hood Includes Late Model Clip Set   Ecklers Camaro's understands your 1967, 1968, 1969 Camaro hood insulation serves a very critical safety purpose. It’s not there to merely offer sound suppression from your engine or to protect your paint from heat. Your hood insulation is there to offer you some protection in case of an engine fire. During heavy heat, the plastic clips that hold the insulation in melt dropping the insulation on top of the engine to smother and reduce the spread of flames. Because of this, some F-body Camaro hood insulations are made to only cover the engine and not fully cover the inside of your hood.  Running a car without Camaro hood insulation can be a critical safety error that no one should make. Our affordable hood insulations are carefully sourced from quality manufacturers and made from modern asbestos free materials. Enjoy your classic 1967, 1968, 1969 Camaro safely with quality replacement hood insulations from Ecklers Camaro. Learn More
$21.99 ea.
Camaro Front Bumper, 1967-1968 Part # BU-1R
Fantastic High Quality Reproduction Made To Factory Specifications Bright Triple Chrome Plating A Crowning Focal Point On Any Camaro Bumper Mounting Hardware Sold Separately 1967 or 1968 first generation Camaro front bumpers are made to be the trick in any restoration, daily driver or hot rod. Our 1967-1968 Chevy Camaro front bumper are made with our specific needs in mind to ensure stratification to the most demanding Camaro owner. Ricks Camaros has gone to great length with the manufacture that the highest manufacturing quality standards are retain along with the most authentic factory style triple chrome plating. Our front bumpers for your F-Body are shipped bare without mounting hardware or bumper brackets. Simply unbolt your old front bumper, reinstall all the hardware, or let us source it for you, and you'll be set. This bright chrome front bumper will catch all the eyes as you're cruising down the road. From racers, show cars, hot rods, and daily drivers, you can trust Rick's Camaros for all of your restoration and replacement needs for your 1967 or 1968 1st gen Camaro! Learn More
$109.99 ea.
Camaro Inner Fender, Right, 1967-1968 Part # PP-35R
Reproduction Of Original Right (Passenger's Side) Inner Fender  Black EPD Coated To Ensure Rust Prevention Correct Gauge & Fit Eckler's Select Series Fits 1967-1968 1st Gen Camaros Rusty inner fenders on your 1967 or 1968 first generation Rally Sport Camaro just wouldn’t cut it at the next show. Your Camaro was always meant to outshine other vehicles on the road. However, how can it do that when it begins to rust? Your 1967 and 1968 Z28 Coupe Camaro won’t get the respect it deserves with its growing blemishes. The inner fenders of your classic Camaro are your friend, as they are crucial in protection for your front wheels, and as such, the fenders are the most heavily prone to damage in the case of minor collisions and more often, rusting over time. Rust can creep up on vehicles and do a lot of damage. The side where the battery is located can drip down battery acid and corrode sizable holes in the inner fender, leaving it lacking in appearance and function. It can be quite costly to fix fender dents and dings on old rusty inner fenders, so it is imperative to do it the right way, the Eckler’s way. Rick’s Camaros brings you this quality reproduction Camaro inner fender made from sturdy sheet metal, so you can start with a clean slate before you paint. Our Camaro fenders are made from correct stamped sheet metal, and are EDP (Electro Deposit Primer) coated, ensuring long term rust-resistance. There is no need to waste your time and energy checking rusty areas to weld patch panels at the end of the day, and Rick’s Camaros wants to provide you with quality replacement 1967 or 1968 Super Sport inner fenders that bolt up like original factory specifications, at a great price. All you have to do is put it on! Treat your 1967 or 1968 1st gen Camaro the way it was meant to be treated: rust free, and replace your inner fenders today at Rick’s Camaros. Learn More
$79.99 ea.
Camaro Fender To Radiator Support Brace Bars, Black, 1967-1969 Part # FB-3
Correct Reproduction Of Original Correct Black Finish Without Bolts Fits RH & LH Sold As A Pair Replaces GM #3903480 (Right) & 3903479 (Left) Fender to radiator support bars in your 1967, 1968, or 1969 Camaro are installs between the fender and radiator on each side under the hood. While it may have been a part that you forgot about over the years, they are important because they help keep the front sheet metal of your Camaro from flexing during adverse driving conditions. Rick’s Camaros is happy to offer these new reproduction fender support bars in correct black finish, matching factory specifications and ready to replace your old and worn support bars. These support braces are correction reproductions in black finish, and are sold as a pair that will fit both the driver’s side and the passenger’s side under the hood, so you can count on a correct fit right off the bat. Trust Rick’s Camaros for all of your replacement and restoration needs for your 1967, 1968, or 1969 Camaro! Learn More
$19.99 pr.
$8.99 Set
Camaro Inner Fender, Left, 1967-1968 Part # PP-35L
Reproduction Of Original Left (Driver's Side) Inner Fender  Black EPD Coated To Ensure Rust Prevention Correct Gauge & Fit Eckler's Select Series Fits 1967-1968 1st Gen Camaros Rusty inner fenders on your 1967 or 1968 first generation Rally Sport Camaro just wouldn’t cut it at the next show. Your Camaro was always meant to outshine other vehicles on the road. However, how can it do that when it begins to rust? Your 1967 and 1968 Z28 Coupe Camaro won’t get the respect it deserves with its growing blemishes. The inner fenders of your classic Camaro are your friend, as they are crucial in protection for your front wheels, and as such, the fenders are the most heavily prone to damage in the case of minor collisions and more often, rusting over time. Rust can creep up on vehicles and do a lot of damage. The side where the battery is located can drip down battery acid and corrode sizable holes in the inner fender, leaving it lacking in appearance and function. It can be quite costly to fix fender dents and dings on old rusty inner fenders, so it is imperative to do it the right way, the Eckler’s way. Rick’s Camaros brings you this quality reproduction Camaro inner fender made from sturdy sheet metal, so you can start with a clean slate before you paint. Our Camaro fenders are made from correct stamped sheet metal, and are EDP (Electro Deposit Primer) coated, ensuring long term rust-resistance. There is no need to waste your time and energy checking rusty areas to weld patch panels at the end of the day, and Rick’s Camaros wants to provide you with quality replacement 1967 or 1968 Super Sport inner fenders that bolt up like original factory specifications, at a great price. All you have to do is put it on! Treat your 1967 or 1968 1st gen Camaro the way it was meant to be treated: rust free, and replace your inner fenders today at Rick’s Camaros. Learn More
$79.99 ea.
Camaro Header Panel, 1967-1968 Part # SM-2R
 Reproduction Of Original    This Camaro reproduction header panel has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit; finish and function will work superbly for your restoration. In addition, using a reproduction header panel from Rick's will add authenticity and value to your Camaro.     Learn More
$58.99 ea.
Camaro Cowl Induction Hood Grille, Style 1, Black, 1967-1969 Part # CI-50
Made From 16 Gauge Aluminum 21 Square Inches Of Opening No Modifications Required If you are looking for something to coverup the unsightly opening in you're cowl induction hood. Give it a custom look with this bolt in cowl induction hood grille from Rick's First Generation. Learn More
$34.99 ea.
Camaro Inner Fender To Firewall Brace, Right, 1967-1969 Part # FB-5
Reproduction Of Original Stamped Steel Attach Rear Of Fenderwell To Firewall Eckler's Select Series This Camaro reproduction inner fender to firewall brace has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit; finish and function will work superbly for your restoration. In addition, using a reproduction  inner fender to firewall brace from Rick's will add authenticity and value to your Camaro.       Learn More

Was: $21.99 ea.

Now: $19.99 ea.
Camaro Outer Rear Wheel Well, Left, 1967-1968 Part # PP-21L
Reproduction Of Original    This Camaro reproduction outer rear wheel well has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit; finish and function will work superbly for your restoration. In addition, using a reproduction outer rear wheel well from Rick's will add authenticity and value to your Camaro.   Learn More

Was: $54.99 ea.

Now: $49.99 ea.
Camaro Hood Insulation Pad, For Cars With Standard Trim (Non-Rally Sport) Or Super Sport (SS), 1967-1969 Part # HD-15
Replacement Hood Insulation  Fits All Cars With Standard Flat Or SS Hood Includes Late Model Style Clip Set     Ecklers Camaro's understands your 1967, 1968, 1969 Camaro hood insulation serves a very critical safety purpose. It’s not there to merely offer sound suppression from your engine or to protect your paint from heat. Your hood insulation is there to offer you some protection in case of an engine fire. During heavy heat, the plastic clips that hold the insulation in melt dropping the insulation on top of the engine to smother and reduce the spread of flames. Because of this, some F-body Camaro hood insulations are made to only cover the engine and not fully cover the inside of your hood.  Running a car without Camaro hood insulation can be a critical safety error that no one should make. Our affordable hood insulations are carefully sourced from quality manufacturers and made from modern asbestos free materials. Enjoy your classic 1967, 1968, 1969 Camaro safely with quality replacement hood insulations from Ecklers Camaro. Learn More

Was: $21.99 ea.

Now: $19.99 ea.
Camaro Trunk Weatherstripping Channel Repair Kit, 1967-1969 Part # PP-77
Reproduction Of Original Fits Coupe & Convertible Trunk Weatherstrip Fits In This Channel Needed For New Quarters & Rear Window To Trunk Panel Replace Old Rusty Pieces   This Camaro reproduction trunk weatherstripping channel repair kit has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit and function will work superbly for your restoration. In addition, using a reproduction trunk weatherstripping channel repair kit from Rick's will add authenticity and value to your Camaro. Learn More
$54.99 Set
Camaro Fender Extension, For Cars With Standard Trim (Non-Rally Sport) Or Rally Sport (RS), Right, 1967-1968 Part # FE-78R
Reproduction Of Original These Are NOT Included With Fender Fits Standard And Rally Sport Fenders   This Camaro reproduction fender extension has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit and function will work superbly for your restoration. In addition, using a reproduction fender extension from Rick's will add authenticity and value to your Camaro. Learn More

Was: $36.99 ea.

Now: $34.99 ea.
Camaro Inner Fender To Firewall Brace, Left, 1967-1969 Part # FB-6
 Reproduction Of Original Stamped Steel Attach Rear Of Fenderwell To Firewall Eckler's Select Series This Camaro reproduction inner fender to firewall brace has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit; finish and function will work superbly for your restoration. In addition, using a reproduction  inner fender to firewall brace from Rick's will add authenticity and value to your Camaro.   Learn More

Was: $21.99 ea.

Now: $19.99 ea.
Camaro Outer Rear Wheel Well, Right, 1967-1968 Part # PP-21R
Reproduction Of Original    This Camaro reproduction outer rear wheel well has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit; finish and function will work superbly for your restoration. In addition, using a reproduction outer rear wheel well from Rick's will add authenticity and value to your Camaro.   Learn More

Was: $54.99 ea.

Now: $49.99 ea.
Camaro Fender Extension, For Cars With Standard Trim (Non-Rally Sport) Or Rally Sport (RS), Left, 1967-1968 Part # FE-78L
Reproduction Of Original These Are NOT Included With Fender Fits Standard And Rally Sport Fenders   This Camaro reproduction fender extension has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit and function will work superbly for your restoration. In addition, using a reproduction fender extension from Rick's will add authenticity and value to your Camaro.       Learn More

Was: $36.99 ea.

Now: $34.99 ea.
Camaro Hood Latch Release Support Bracket, 1967-1968 Part # SM-8
Accurate Reproduction Of Original Heavy Weight Stamped Steel Black EPD Coated To Ensure Rust Prevention Mounts Under Hood Catch Mechanism For 1967-1968 1st Gen Standard Or Rally Sport Camaros The hood latch release support bracket is always working when opening and closing the hood on your 1967 or 1968 first generation Camaro. The catch support bracket is what enables your hood to latch when closed, and to unlatch when trying to open. With a damaged support bracket, your hood will not be able to function properly, which can lead to dangerous situations on the road. Rick's Camaros wants to ensure your safety by offering this new hood latch release support bracket for your F-Body, which is made of original heavy weight stamped steel, and is black EDP coated to prevent any future rusting. This hood catch support bracket will mount under the hood by the catch mechanism. Don't wait to keep your hood in good, working condition. From racers, show cars, hot rods, and daily drivers, you can trust Rick's Camaros for all of your restoration and replacement needs for your 1967 or 1968 1st gen Camaro! Learn More
$26.99 ea.
Camaro Front Bumper, 1967 Part # BU-167
Correct Reproduction of Original Best Reproduction Bumper Available Triple Chrome Plating Correct Holes For Larger 1967 Only Corner Brackets Rickís is proud to offer the finest reproduction front bumper for the 1967 Camaro available to date! This bumper is made off of new tooling with triple chrome plating for the demanding restorer at a price anyone can afford. Purchase your new bumper from Rickís today and get the best parts at the best price. Learn More
$129.99 ea.
Camaro Hood Insulation Pad, Molded, For Cars With Super Sport Or Standard Hoods, 1967-1969 Part # HD-45
Reproduction Of Original Includes Indentations For Air Cleaner, Air Conditioning Box & Other Accessories Correct Hood Insulation Clips Available Separately as HD-17   Ecklers Camaro's understands your 1967, 1968, 1969 Camaro hood insulation serves a very critical safety purpose. It’s not there to merely offer sound suppression from your engine or to protect your paint from heat. Your hood insulation is there to offer you some protection in case of an engine fire. During heavy heat, the plastic clips that hold the insulation in melt dropping the insulation on top of the engine to smother and reduce the spread of flames. Because of this, some F-body Camaro hood insulations are made to only cover the engine and not fully cover the inside of your hood.  Running a car without Camaro hood insulation can be a critical safety error that no one should make. Our affordable hood insulations are carefully sourced from quality manufacturers and made from modern asbestos free materials. Enjoy your classic 1967, 1968, 1969 Camaro safely with quality replacement hood insulations from Ecklers Camaro. Learn More
$86.99 ea.
Camaro Coupe Front Seat Frame Floor Support, Right, 1967-1969 Part # PP-110
Eckler's Select Series Die Stamped Reproduction Of Original Correct Nut For Seat Mounting Fits Passanger Side This Camaro reproduction coupe seat frame support has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit and function will work superbly for your restoration. In addition, using a reproduction coupe seat frame support from Rick's will add authenticity and value to your Camaro. Die stamped floor panel for mounting bucket seat includes correct nuts welded to panel for mounting the seat tracks. Does not include the caged nut for sub-frame mounting. Quality imported reproduction. RH (passenger) side only.   Learn More

Was: $59.99 ea.

Now: $54.99 ea.
Camaro Coupe Front Seat Frame Floor Support, Left, 1967-1969 Part # PP-111
Eckler's Select Series Die Stamped Reproduction Of Original Correct Nut For Seat Mounting Fits Driver's Side This Camaro reproduction coupe seat frame support has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit and function will work superbly for your restoration. In addition, using a reproduction coupe seat frame support from Rick's will add authenticity and value to your Camaro. Die stamped floor panel for mounting bucket seat includes correct nuts welded to panel for mounting the seat tracks. Does not include the caged nut for sub-frame mounting. Quality imported reproduction. LH (drivers) side only. Learn More

Was: $59.99 ea.

Now: $54.99 ea.
Camaro Hood Insulation Pad, Molded, Cowl Induction, 1967-1969 Part # HD-46
Reproduction Of Original Features Cut-Out For Cowl Induction Air Cleaner Includes Indentations For Air Conditioning Box & Other Accessories Correct Hood Insulation Clips Available Separately as HD-17   Ecklers Camaro's understands your 1967, 1968, 1969 Camaro hood insulation serves a very critical safety purpose. It’s not there to merely offer sound suppression from your engine or to protect your paint from heat. Your hood insulation is there to offer you some protection in case of an engine fire. During heavy heat, the plastic clips that hold the insulation in melt dropping the insulation on top of the engine to smother and reduce the spread of flames. Because of this, some F-body Camaro hood insulations are made to only cover the engine and not fully cover the inside of your hood.  Running a car without Camaro hood insulation can be a critical safety error that no one should make. Our affordable hood insulations are carefully sourced from quality manufacturers and made from modern asbestos free materials. Enjoy your classic 1967, 1968, 1969 Camaro safely with quality replacement hood insulations from Ecklers Camaro. Learn More
$97.99 ea.
Camaro Toe Board Repair Panel, Left, 1967-1969 Part # PP-15L
Show Quality Reproduction Repair Panel Correct Gauge Steel Floor To Firewall Extension Manufactured In The USA 20" Length X 15.5" Width Left (Driver's Side) Rick’s Camaros stamped steel sheet metal floor pan repair panels are crucial when rust rears its ugly head. 1967, 1968, or 1969 Camaro floor pans take a beating over the years and are rarely rust-free. Rick’s Camaros sources sheet metal floor pans from the world’s premium manufacturers to bring you only the very best for your restoration. F-Body floor pans are stamped on heavy ton equipment from correct gauge steel to ensure factory style contours and maximum rigidity over originals. The left side toe board repair panel, or firewall extension, reaches from the front firewall to the floor of your First Generation Camaro. Floor pans from Rick’s Camaros must be welded in and usually fitted, so never cut out your original floor pans before receiving replacements. We highly recommend the use of a skilled body shop when installing replacement Camaro floor pans and to always check other related items such as floor braces, rocker panels, toe panels and seat supports for other potential replacement needs. We have sold thousands of sheet metal floor pans and will stand by each purchase to make sure that your 1st generation Camaro is restored to perfection. From racers, hot rods or daily drivers, trust Rick’s Camaros for all of your restoration and replacement needs for your 1967, 1968, or 1969 Camaro! Learn More
$48.99 ea.
Camaro Hood, Steel, Cowl Induction, 1967-1969 Part # HD-2
Best Quality Reproduction Camaro Cowl Induction Hood 2” Cowl Height As Original Heavier Construction On New Tooling This Hood Is Not The Lightweight One That Doesn't Fit Very Well Sold Elsewhere  Finest Quality Manufactured By Auto Metal Direct  Finally! A Camaro cowl induction hood with a look and fit better than the Original GM hood toward the end of its run before being discontinued. This new 1969 Camaro cowl hood from AMD is much heavier with crisp lines where previous imported hoods have fallen short. Don't scrimp on the most visible part of your Camaro! Purchase the best parts available for your standard Camaro, Super Sport (SS), Rally Sport (RS) or Z28 from Rick's Camaros always at the best possible price. Fits: 1967, 1968 and 1969   Learn More

Was: $299.99 ea.

Now: $224.99 ea.
Items: 1 to 28 of 170 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next
Grid  |  List
4