Product Experts Available 1-800-359-7717

1967 CAMARO Z28 FUEL SYSTEMS

Search Term: 'All Parts'
Category: 'Fuel Systems'
Vehicle: '1967 CHEVY CAMARO Z28'
Items: 1 to 28 of 107 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next
Grid  |  List
Best Sellers
Camaro Fuel Line Retaining Clamp, 3/8", 1967-1969 Part # FLC-20
Original style for GM. For generic use with 3/8" diameter fuel lines. Learn More
$2.99 ea.
Camaro Gas Tank Anti-Squeak Insulator Set, 1967-1969 Part # FT-7
Best Quality Reproduction Fuel Tank Anti-Squeak Set Anti-Pop Pad Made of Closed Cell Foam Strap and Trunk Floor Support Liners Made of Vinyl 5 Piece set One Set Required per Car Originally, GM used a tacky, tar-like anti-squeak set on top of the fuel tank only. Rick's First Generation offers this kit to keep the metal to metal noise and the mess on your Camaro to a minimum. This set contains material to cover all areas of the tank which may have problems with metal on metal contact. Use the right parts for your restoration from Rick's First Generation.   NOTE: For ease of installation, a small amount of general spray adhesive may be applied to the tank to make the anti-squeak kit adhere during tank installation. Learn More
$21.99 Kit
Camaro Original Equipment Steel Fuel Lines, Show Correct, 1967-1992 Part # MS-1963
Show Correct Reproduction Fuel Lines For Camaro Lines Are Prebent Based On Factory Specifications Made From Original Equipment Steel Available For Most Engine Applications Made In USA Changing your Camaro's fuel lines is often overlooked during restoration projects. Old, rusty and bent fuel lines are not only unsightly, they can split causing fuel to spray all over your hot engine. Doesn't your classic deserve better than that? It's time replace your original fuel lines with OE correct fuel lines from Rick's Camaros. Our show correct fuel lines are prebent using the same high strength steel as the originals. Correct end fittings make our fuel lines easy to install and ensure a leak free fit. Using prebent fuel lines from Rick's Camaros for your restoration will give you more than just a correct fit, it will give you peace of mind. Rick's Camaros offers prebent fuel lines for your 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991 or 1992 Camaro. Learn More
Camaro Gas Tank Sending Unit, 3/8", 1967-1969 Part # FT-33
Quality Reproduction Fits All 1968 V8 Engines Fits 1969 302, 396/375hp & All With 2-Barrel 3/8” Outlet Tube 0-90 Ohm Range Includes O-Ring Seal & Filter Your 1968-1969 Camaro fuel sending unit spends its life in a very inhospitable environment and it is prone to fail. Rick’s offers this quality reproduction fuel sender to keep your F-Body Camaro fuel gauge reading correctly. Don’t be caught on the side of the road out of gas! Replace your 1968-1969  fuel sending unit today with this quality reproduction from Rick’s. NOTE: The ground strap must be attached to the frame rail for the fuel sender to function properly. Many times this ground wire can be pulled loose from the sender during tank installation resulting in the fuel gauge pegging past full. Learn More
$49.99 ea.
Camaro Carburetor Accelerator Rod Bushing & Sleeve, 1967-1969 Part # RC-21
Reproduction of Original (1) Rubber Bushing (1) Plastic Sleeve See More Photos for Placement Diagram   The frugal minded Camaro owner would install this bushing and sleeve into the throttle arm to keep friction down between it and the accelerator rod reducing the possibility of premature failure. Don't get caught in your Camaro at a cruise night with a brokengas pedal rod. Replace your accelerator bushing and sleeve with this quality reproduction from Rick's First Generation. Learn More
$3.99 Kit
Camaro Gas Tank Sending Unit Locking Ring, 1967-1969 Part # FT-15
Eckler's Select Series Locks sender to gas tank. (Note: lock rings and seals are included with reproduction gas tanks only).   Learn More
$4.99 ea.
Camaro Gas Tank Sending Unit Locking Ring Seal / Gasket, 1967-1969 Part # FT-17
 Reproduction Of Original Lock Rings & Seals Are Included With Reproduction Gas Tanks Only Eckler's Select Series This Camaro reproduction gas tank sending unit gasket has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit, finish and function will work superbly for your restoration. In addition, using a reproduction gas tank sending unit gasket from Rick's will add authenticity and value to your Camaro.   Learn More
$2.99 ea.
Camaro Gas Tank To Filler Neck Hose, With GM Mark & Clamps,1967-1968 Part # FT-40
Reproduction of Original Correct Length Correct GM Stamping (2) Correct Tower Style Hose Clamps Quality reproduction of a common wear part. This hose connects the filler neck to the gas tank on a 1967-8 Camaro. Other reproductions on the market are well...just a piece of hose. Rick's First Generation brings you this correct hose with the correct clamps so you do not have to look around the shop of garage to find clamps that are "close enough" or "will work". Buy the best parts for your restoration from Rick's First Generation. Learn More
$21.99 ea.
Camaro Gas Pedal Spring, 1967-1981 Part # PT-75
Best Quality Reproduction Camaro Gas Pedal Spring Accurate Reproduction Of Original GM Part Keeps The Pedal Angled Correctly   In the past, installation of the Camaro gas pedal spring has been a real pain in the fingers! The replacement GM Part is from some other application which makes it a real bear to install. Now, Rick's Camaros offers this correct accelerator spring for your Camaro which is a duplicate of the original GM accelerator spring and that makes your install much easier. Buy the best parts like this gas pedal spring for your standard Camaro, Super Sport (SS), Rally Sport (RS), Z28, Type LT or;Berlinetta from Rick's always at the best possible pricing. Fits: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980 and 1981 Learn More
$4.99 ea.
Camaro Gas Tank Strap Bolt Set, 1967-1969 Part # FT-8
Reproduction of Original (2) Correct Plated Carriage Bolts (2) Flat Washers (4) Flanged Hex Nuts These bolts are the only bolts which hold the gas tank into your Camaro. The gas tank straps attach to the front of the trunk floor support, run under the gas tank and fasten near the tail pan with this bolt set. They are very prone to rust. Replace your Camaro's old gas tank strap bolts with this quality reproduction from Rick's First Generation.   Learn More
$5.99 ea.
Camaro Gas Tank Mounting Straps, Stainless Steel, 1967-1969 Part # FT-47
Restoration Correct Gas Tank Straps Stainless Steel Finish Correct Length And Bend One Set Required Per Car Bolt Set Available Separately, Part # FT-8    Have the gas tank straps on your 1967, 1968 or 1969 Camaro began to rust over? Rick's Camaros is proud to offer these high quality fuel tank straps. Each fuel tank strap is made from stainless steel for maximum corrosion resistance, properly bent to factory specifications and feature double bent ends for added strength. Using rusty and over-stretched fuel tank straps on your 1967, 1968 or 1969 Camaro Standard, Rally Sport (RS), Super Sport (SS) or Z28 is not only an eyesore, but prone to failure. Trust Rick's for all of your gas tank needs!  Learn More
$39.99 pr.
Camaro Stainless Steel Fuel Lines, Repair Approved, 1967-1992 Part # MS-1962
Best Quality Reproduction Fuel Lines For Camaro Lines Are Prebent Based On Factory Specifications Made From Stainless Steel Available For Most Engine Applications Made In USA Your Camaro's fuel lines are often overlooked during restoration. Old, rusty and bent fuel lines are not only unsightly, they can split causing fuel to spray all over your hot engine. Your Camaro deserves better. If time has discolored and rusted your original lines, it's time replace them with stainless steel fuel lines from Rick's Camaros. These fuel lines are prebent just like the originals, but are manufactured with longer lasting stainless steel. Nobody wants to do a job twice. When show correctness is not an issue for your daily driver or street rod, durable stainless steel fuel lines from Rick's Camaros are the perfect choice for your 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992 Camaro. Learn More
Camaro Gas Tank Strap & Mounting Kit, Stainless Steel, 1967-1969 Part # FT-41
Restoration Correct Gas Tank Straps Stainless Steel Finish Correct Length And Bend One Set Required Per Car Includes Stainless Steel Hardware   Have the gas tank straps on your 1967, 1968 or 1969 Camaro began to rust over? Rick's Camaros is proud to offer these high quality fuel tank straps. Each fuel tank strap is made from stainless steel for maximum corrosion resistance, properly bent to factory specifications and feature double bent ends for added strength. Using rusty and over-stretched fuel tank straps on your 1967, 1968 or 1969 Camaro Standard, Rally Sport (RS), Super Sport (SS) or Z28 is not only an eyesore, but prone to failure. Trust Rick's for all of your gas tank needs!    Learn More

Was: $54.99 Kit

Now: $39.99 Kit
Camaro Fuel Hose Clamp, 3/8", Pinch Style, Green, 1967-1980 Part # RC-11
Restoration Correct   Olive Green Paint Fits 3/8" Fuel Hoses Some Applications Used Up To 12 Clamps For The Fuel System 1967-1980 Camaro is a great platform for restoration projects. Ricks Camaros offers these quality, correct Fuel Hose Clamp, 3/8", Pinch Style, Green. These little green pinch clamps are used all over the fuel system for various 3/8” hoses. Usually, they are found where the fuel sender in the tank meets the pump to tank line near the passenger’s side frame rail and where that line meets the fuel pump. Replace your incorrect worm gear clamps on your 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980 Camaro with these correct green pinch clamps today from Rick’s Camaros and keep your car show fresh! Trust Ricks Camaros for all your parts needs. Learn More

Was: $1.09 ea.

Now: $0.99 ea.
Camaro Gas Pedal To Accelerator Rod Pin, 1967-1991 Part # PT-52
Best Quality Reproduction Camaro Gas Pedal Pin Accurate Reproduction Black Phosphate Coated As Original Will Not Fit 1970-1971 Z28 Your Camaro accelerator pedal, pin and spring all combine together to form the fulcrum of your accelerator linkage. Over time all of these parts in your Camaro can wear and eventually fail and leave you and your Camaro on the side of the road. Rick's Camaros offers only the best parts like this throttle pedal accelerator spring for your standard Camaro, Super Sport (SS), Rally Sport (RS), Z28, Type LT or Berlinetta always at the best possible price. Fits: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990 and 1991. Learn More

Was: $3.99 ea.

Now: $2.99 ea.
Camaro Gas Tank To Filler Neck Hose, 1967-1968 Part # FT-4
Fuel resistant rubber hose connects filler neck to gas tank. For 67-68 only. Learn More

Was: $9.99 ea.

Now: $8.99 ea.
Camaro Gas Tank, 1967-1968 Part # FT-18
Reproduction Of Original Tin Construction Like Original 18 Gallon / 68 Liters Size 38 3/8" x 20 7/8" x 7 3/4" Includes Sending Unit Locking Ring & Seal Eckler's Select Series While gas tanks can be used for a long time, they can become damaged from fuel misuse, as well as rusting from weather conditions. Rick's Camaros offers this famous Eckler's Select Series reproduction gas tank that has been manufactured to match factory specifications and will replace your original gas tank. It has tin construction like the original, and can hold up to 18 gallons. Including the sending unit locking ring and seal, you will have all you need for a full gas tank replacement on your Camaro. Whether your original tank is damaged, or you would simly like a more updated look to make your Camaro really pop, this Select Series gas tank reproduction is exactly what you need. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967 or 1968 Camaro! Learn More
$129.99 ea.
Camaro Throttle Rod E-Clip, 1967-1969 Part # RC-240
Accelerator Rod E-Clip Sold Each This correct fastener installs you 1967, 1968, or 1969 Camaro's accelerator rod through the carburetor throttle arm. Learn More
$1.50 ea.
Camaro Gas Tank Filler Neck, Show Correct, 1967-1968 Part # FT-3
GM Licensed Reproduction Show Quality Allows Gas Cap To Be Positioned Properly Correct Bright Finish As Original Restoration Correct This 1967-1968 Camaro reproduction gas tank filler neck has been manufactured to original factory specifications using today's modern manufacturing techniques. This Gas filler neck allows the gas cap to be positioned properly and has the correct bright finish. You will find the fit and function will work superbly for your restoration. In addition, using a reproduction gas tank filler neck from Ricks Camaros will add authenticity and value to your 1967, 1968 Camaro. Learn More
$49.99 ea.
Camaro Fuel Tank Sender Wiring Harness, 1967-1968 Part # 71184
Best Quality Reproduction Fuel Sender Wiring Most Common Replaced Item When Pulling The Fuel Tank Out Of Your Camaro Replaces Cut Or Broken, Fragile Original Includes Correct Tan Wire With Correct Gauge Correct Black Grommet & Plug Your 1967-1968 Camaro does not need to be paraded around town with old, cracked and sub-standard wiring harnesses. This is a safety hazard which can cause your beloved Camaro to literally go up in smoke. Rick's Camaros has the best quality reproduction wiring harness available for your 1967-1968 Camaro restoration. So, if you are restoring a Super Sport (SS), a Rally Sport (RS), a Z28 or a plain jane Camaro coupe or convertible, Rick's Camaros has the best parts like this fuel sending unit wiring harness for your Camaro restoration always at the best possible price. Learn More

Was: $16.99 ea.

Now: $15.99 ea.
Camaro Screw Set, Gas Tank Filler Neck Sleeve Retainer Part # HW-97
Replacement Retainer Screw Set Attaches Fuel Sleeve Retainer To Trunk Floor Set Of 4 These Camaro replacement gas tank filler neck sleeve retainer screw set has been manufactured to meet or exceed factory specifications and performance. You will find the fit; finish and function will work perfectly for your Camaro. You will also be pleased to know that Rick's has sourced this chrome valve cover bolt set among other possible parts as the best choice for your repair or restoration project. Learn More
$3.99 Set
Camaro Fuel Hose Kit, Fuel Sender To Frame & Frame To Fuel Pump, 1967-1969 Part # 38HCS
Correct diameter fuel hoses for front and rear connections. With four correct green fuel hose pinch clamps. Learn More
$9.99 Set
Camaro Gas Tank Filler Neck Sleeve Retaining Plate, 1967-1968 Part # FT-37
Reproduction Of Original Retains Filler neck Hose (FT-5) To Trunk Floor   This Camaro reproduction fuel filler neck sleeve retainer has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit; finish and function will work superbly for your restoration. In addition, using a reproduction fuel filler neck sleeve retainer from Rick's will add authenticity and value to your Camaro.     Learn More

Was: $9.99 ea.

Now: $7.99 ea.
Camaro Gas Cap, Locking, Bowtie, 1967-1968 Part # GC-8
Officially Licensed Reproduction Fits All 1967 & 1968 Camaros Complete With Two Keys Made In USA Camaro locking gas caps are an integral part of every automobile. When it comes to the gas tank, security and integrity are paramount. The gas cap is vital in preventing corrosion, delivering pressurized gas to the fuel pump, and keeping harmful carcinogens inside the tank and impurities out. Rick’s Camaros offers gas caps to fit your 1967 or 1968 Camaro. Ensure peace of mind by providing your classic Chevy Camaro with a locking gas cap. The chrome finish affords authenticity and class. This Camaro locking gas cap provides lock and safety at an affordable price, and is available at Rick’s Camaros today!     Learn More

Was: $31.99 ea.

Now: $29.99 ea.
Camaro Pedal Pivot Shaft Retaining Clip, For Cars With Manual Or Automatic Transmission, 1967-1969 Part # PT-10
Quality Replacement One Required   A new Camaro gas pedal pivot shaft retaining clip may become ost or damaged on your 1967, 1968, or 1969 Camaro. When this happens replacement is a must, and Rick's Camaro is your place. This clip is responsible for holding the accelerator pivot shaft in place. Invest in a new pedal pivot shaft retaining clip at Rick's Camaro today! Learn More
$1.99 ea.
Camaro Gas Pedal Pad Trim, 1967-1981 Part # PT-51
Best Quality Reproduction Camaro Gas Pedal Trim Highly Polished Stainless Steel Fits 1967 Rubber Coated Pad Also Will Not Fit 1970-72 BB & Z/28 With Longer Floor Mounted Pedal The gas pedal pad trim in your Camaro coupe or convertible takes a real beating. Come on now...you can't lie to us...we know you crush it into the carpet of your Camaro when the police aren't watching or whenever you get the chance. At some point you will break your accelerator pad and the stainless trim and be left with half a pedal or just the accelerator rod hanging down from your Camaro firewall to get you home. Buy the best quality reproduction parts like this gas pedal pad trim from Rick's Camaros and know you are getting the best parts for your standard Camaro, Super Sport (SS), Rally Sport (RS), Z28, Type LT or Berlinetta at the best possible price. Fits: 1967 as a replacement. 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980 and 1981   Learn More
$6.99 ea.
Camaro Gas Tank Filler Neck Sleeve, 1967-1968 Part # FT-5
Replacement Filler Neck Sleeve Rubber Sleeve In Trunk Area Seals Trunk From Gas Fumes From Filler Neck For 1967-1968 Camaro Models   While everyone is familiar with their gas tank, not everyone thinks about the gas tank filler neck sleeve in their 1967 or 1968 first generation Camaro. The filler neck sleeve helps to keep the gas tank neck from corroding as it passes through the trunk to the actual fuel tank. The rubber sheath covers the gas tank filler neck tube which extends from the rear F-Body tail panel to the trunk floor on its way to the gas tank. The neck sleeve can possibly deteriorate over time, but it is also best to get when replacing your gas tank or gas tank neck. Rick's Camaros is happy to offer this reproduction filler neck sleeve, manufactured with correct molded rubber, and including pre-drilled holes for mounting screws. This rubber neck sleeve will make a direct fit in your fuel tank assembly, and promises to seal your trunk from any gas fumes from the filler neck. Keep your gas tank assembly secure, working great, and protecting the rest of your Chevrolet from gas fumes or spillage. From racers, show cars, hot rods, and daily drivers, you can trust Rick's Camaros for all of your restoration and replacement needs for your 1967 or 1968 1st gen Camaro! Learn More
$21.99 ea.
Camaro Throttle Rod, Universal, 1967-1981 Part # RC-379
Original Style Bend Or Modify As Needed Helps Maintain Stock Look 14-1/2" Length Swivel Included Do you have an intake where your original throttle rod will not work? Rick's offers this accelerator rod to work with most odd intake combinations while mantaining a stock look. Learn More

Was: $33.99 ea.

Now: $14.99 ea.
Items: 1 to 28 of 107 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next
Grid  |  List
1