Product Experts Available 1-800-359-7717

1968 Camaro Parts For Sale - 1968 Camaro Restoration Parts

1968 CAMARO CHEVY EXTERIOR

Search Term: 'All Parts'
Category: 'Exterior'
Vehicle: '1968 CHEVY CAMARO'

Rick’s Camaros is your one-stop shop for 1968 Camaro parts. The 1968 Camaro was a First Generation F-Body Camaro, spanning from years 1967-1969. 1968 included the Z28 Coupe, Super Sport Convertible and Coupe, Rally Sport Convertible and Coupe, and the Standard Convertible and Coupe. The Camaro retained the same general appearance in 1968, but without side vent windows, a restyled center console and secondary gauge package, a more pointed front grille, divided rear taillights, and the introduction of Astro Ventilation, a fresh air-inlet system. Shock absorber mounting was also staggered to resolve wheel hop issues and higher performance models received multi-leaf rear springs instead of single-leaf units. In addition to carrying 1st Generation 1968 Camaro parts, Rick’s Camaros has parts for all Camaro models available. We have all the parts and accessories you need to help restore your 1968 Generation One Camaro, at the best prices! Trust Ricks for all of your restoration and replacement needs for your racer, show car, street rod, or daily driver.

Items: 1 to 28 of 32 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. Next
Grid  |  List
Best Sellers
Camaro Fender To Radiator Support Bars, Chrome, 1967-1969 Part # FB-1
Quality Replacement Supports Radiator Core Triple Chrome Plated (4) Chrome Mounting Bolts Included Easy To Mount Sold As A Pair Replaces GM #3903480 (Right) & 3903479 (Left) Fender to radiator support bars in your 1967, 1968, or 1969 Camaro are installed between the fender and radiator on each side under the hood. While it may have been a part that you forgot about over the years, they are important because they help keep the front sheet metal of your Camaro from flexing during adverse driving conditions. Over time, they can rust and become worn, looking ugly and not properly supporting your radiator core. Rick’s Camaros is happy to offer these new reproduction chrome plated fender support bars in a shiny chrome finish, matching factory specifications and ready to replace your old and worn support bars. The triple chrome plating looks great as it complements your detailed engine compartment. These support braces are sold as a pair and also fit both the driver’s side and the passenger’s side under the hood, so you can count on a correct fit right off the bat. Don't wait another minute to keep your radiator core in your F-Body supported. Trust Rick’s Camaros for all of your replacement and restoration needs for your 1967, 1968, or 1969 1st gen Camaro! Learn More
$19.99 Set
Camaro Hurst Equipped Emblem, 1967-2011 Part # EM-95
Replacement Emblem Die-Cast Construction Unlike Other Inexpensive Plastic Reproductions Hurst "Red & Black Painted Inlay Mounts With Three 1/8" Mounting Studs Would Make A Great Edition To Your 4, 5 Or 6 Speed Car Add a touch of nostalgia to your 1st Gen or new, 5th Generation Camaro or anywhere in between. In the 60's and 70's, the "Hurst Equipped" emblem let everyone know you had the best on board and you were not afraid to use it on the street or strip! Continue the legend today with this high quality emblem from Ricks.   NOTE: For ease of installation, the mounting studs may be cut off of the back of this emblem and replaced with double sided tape so there is no need to drill holes in the body.  Learn More

Was: $34.99 ea.

Now: $19.99 ea.
Camaro Hood, Steel, Cowl Induction, 1967-1969 Part # HD-2
Best Quality Reproduction Camaro Cowl Induction Hood 2” Cowl Height As Original Heavier Construction On New Tooling This Hood Is Not The Lightweight One That Doesn't Fit Very Well Sold Elsewhere  Finest Quality Manufactured By Auto Metal Direct  Finally! A Camaro cowl induction hood with a look and fit better than the Original GM hood toward the end of its run before being discontinued. This new 1969 Camaro cowl hood from AMD is much heavier with crisp lines where previous imported hoods have fallen short. Don't scrimp on the most visible part of your Camaro! Purchase the best parts available for your standard Camaro, Super Sport (SS), Rally Sport (RS) or Z28 from Rick's Camaros always at the best possible price. Fits: 1967, 1968 and 1969   Learn More

Was: $299.99 ea.

Now: $224.99 ea.
Camaro Headlight Door Conversion Kit, Vacuum To Electric, Rally Sport (RS), 1968 Part # DS-57
Great Upgrade From Vacuum Easy Installation Direct Bolt-In DSE's RS Headlight Door Kit replaces the stock vacuum actuated system on an RS headlamp equipped 1968 Camaro. It also makes converting your non-RS Camaro to hide-away headlights much easier. When installed, this kit will operate the headlight doors more reliably, smoother, and without the complicated and bulky vacuum accessories. Vehicles with large cams and low vacuum signals will also benefit from this system. The RS Headlight kit uses current sensing technology to provide a system that needs no adjustment and is extremely safe. DSE has gone to great lengths to provide you with the highest quality, best engineered product available with the easiest installation and minimal modification to your vehicle. The kit comes complete with everything needed for installation including two electric actuators, a control module, harness, mounting brackets, and hardware. Learn More
$489.99 Kit
Camaro Hood Hinge Bolt & Washer Set, Chrome, 1967-1969 Part # CK-120
Heavy chrome plating. Does both hood hinges. Set of 16 pieces. Learn More
$12.99 Set
Camaro Subframe Bushing Kit, Polyurethane, Convertible, With Hardware, 1967-1969 Part # 721135
Full Hardware Bushing Kit Made With Polyurethane Improves Stiffness And Steering Handling For Convertibles   While not often thought about, subframe bushings can be very hazardous to your 1967, 1968, or 1969 Camaro if worn down long enough. Rick’s Camaros wants to help in figuring out whether or not you need new subframe bushings. Some symptoms of worn bushings could be uneven tire wear, “darting” when using the brakes, clunking from the front suspension, or moving left or right with no steering input while driving forward. Any of these things could mean that your bushings need replacing, and Rick’s Camaros is here to provide the best subframe replacement bushing kits. Replacing exact original factory specifications, our subframe bushing mount kit will exactly fit your original Camaro bushings. Our bushing mount kits are made with Polyurethane and are guaranteed to improve the handling and stiffness of your Camaro and reduce chances of uncontrolled steering movement or suspension clunking. These bushings are also guaranteed to last longer than stock rubber bushings. When checking and replacing the bushings of your Camaro, they can be inspected by looking at the top of bushing that sits between the subframe and body of your Camaro. Trust Rick’s Camaros to provide only the best replacement parts for your 1967, 1968, or 1969 Camaro! Learn More
$74.99 Kit
Camaro Rear Inner Wheel Housing Tubs, Deep, Detroit Speed &Engineering (DSE), 1967-1969 Part # DS-35
Inner Tubs Only (Connect To Stock Outer Wheel Wells) Allows Almost 3” More Clearance Accommodate Wheels Up to 12” wide While Retaining Stock Appearance Stamped From 18 Gauge Steel Use with upper rear shock mount P/N DS-36, offset shackles P/N DS-26, lower shock plates P/N DS-16 & DS-17, & a narrow fuel tank P/N DS-46 Or DS-47 NOTE: Complete kits also available with springs as our Part Numbers: DS-41, DS-42, DS-43 or DS-44.    Learn More
$349.99 pr.
Camaro Firewall Fill Plate, For Cars With Aftermarket Air Conditioning System, 1967-1969 Part # DS-37
18 Gauge Steel With Rolled Edge Weld In For Smooth Firewall Appearance Works on AC and Non-AC Firewalls Made In USA Rick's First Generation brings you the Camaro Firewall Fill Plate to do away with the unsightly holes in the Firewall which are left when aftermarket Air Conditioning systems are used. The Firewall fill plate gives a custom, smooth firewall by following the upper factory firewall seam exactly. Complete with full instructions. Learn More
$89.99 ea.
Camaro Front Spoiler, Carbon Fiber, Gloss, 1967-1969 Part # SB-80
Carbon Fiber Top Layer With Fiberglass Underside Designed With Tighter Corners & Shallower Depth For Better Ground Clearance Gloss Finish Learn More
$284.99 ea.
Camaro Billet Aluminum Hood Hinges, Polished Finish, 1967-1969 Part # 754077
High Quality Custom Polished Finish Hinges Manufactured Using 6061-T6 Aluminum Sealed Bearings For Maximum Smoothness And Longevity Integral Stainless Steel Gas Struts Stainless Steel Mounting Hardware Included Learn More
$569.99 pr.
Camaro Spoiler, Front, Pro Touring, 1967-1968 Part # SB-500
22 Gauge Metal Construction Direct Bolt-On Black Satin Finish Can Be Scuffed And Painted To Match Your Car We finally have a fabricated steel front spoiler to finish off the pro touring look in the front of your Camaro. This steel front spoiler is a new cutting edge design that will bolt on to your 1967-68 Camaro with out any modifications. Be the first at the show or on the road course with the new pro touring front spoiler from Rick's Camaros. Learn More
$349.99 ea.
Camaro Hood Hinge Bolt Set, Bowtie Stamped, Chrome, 1967-1969 Part # CK-57
Dress up your Camaro! Officially licensed GM Product from Gardner-Westcott. Has the Chevy Bow-Tie emblem stamped onto the head of each bolt. High polished heavy chrome plated. Learn More
$18.99 Set
Camaro Hood, Stinger Style, 1967-1969 Part # HD-99
Upgrade For Original Hood Now available! This Stinger-style hood sports the same bulge as the classic, Big Block-wielding Corvettes. Whether you need this hood's extra clearance to make room for an obscene power plant or you just want to use its rugged, aggressive style to intimidate your enemies, this hood from Rick's Camaros will let everyone know that you mean business. Learn More
$419.99 ea.
Camaro Hood, Steel, Cowl Induction, 1967-1969 Part # HD-88
Replacement Hood 2” Cowl Height Import Quality Eckler's Select Series   Learn More

Was: $214.99 ea.

Now: $199.99 ea.
Camaro Fender Braces, Fabricated Style, 1967-1969 Part # DS-73
Custom Replacement Fender Braces CNC Machined Clevis From 304 Stainless Steel Includes Fabricated Mounting Brackets With Stainless Steel Hardware The fender brace kit has 100% CNC machined Clevis' from 304 Stainless Steel. The kit includes fabricated mounting brackets and comes with button head stainless steel mounting bolts. The fender braces triangulate the radiator core support to the fender and are fully adjustable, a benefit not available with your stock fender braces. All mounting brackets come powder coated satin black. Learn More
$184.99 Set
Camaro Super Sport (SS) Hood Louver Ornaments, Polished Billet, 1968-1969 Part # HD-39
Replacement Hood Ornaments Billet Construction, That Will Not Flake Or Peel Like Originals Beautiful Polished Finish Fits The Stock Super Sport Hood Hood Gasket Available Separately As Our Part # HD-11 Finally someone has manufactured a hood louver that will stand the elements without the finish peeling or flaking off. These beautiful polished billet Camaro hood louvers are machined from one piece of billet and then polished to a briliant luster. These polished billet hood louvers from Rick's Camaros will be great final touch or upgrade to your Camaro. Learn More

Was: $399.99 pr.

Now: $374.99 pr.
Camaro Billet Aluminum Hood Hinges, Machined Finish, 1967-1969 Part # 754029
High Quality Custom Machined Finish Hinges Manufactured Using 6061-T6 Aluminum Sealed Bearings For Maximum Smoothness And Longevity Integral Stainless Steel Gas Struts Stainless Steel Mounting Hardware Included Learn More
$494.99 pr.
Camaro Trunk Hinges, Billet Aluminum, Polished 1967-1969 Part # 754104
Custom Polished Aluminum Trunk Hinges Made Of CNC 6061 T6 Aluminum Learn More
$319.99 pr.
Camaro Louver, Rear Window, Aluminum, 1967-1969 Part # 735162
Functional & Stylish Louver For Back Glass 1-Piece Aluminum Keeps Interior Cooler By Blocking Sun Without Reducing Visibility No-Drill Stainless Steel Mounting Plates Are Easy To Install And Remove Comes In Black But Can Be Painted   Learn More
$374.99 ea.
Camaro Front Spoiler, Carbon Fiber, Satin, 1967-1969 Part # SB-81
Carbon Fiber Top Layer With Fiberglass Underside Designed With Tighter Corners & Shallower Depth For Better Ground Clearance Satin Finish Learn More
$284.99 ea.
Camaro Cowl Induction Hood, 4", Square Corners, Steel, 1967-1969 Part # HD-43
Good Quality Reproduction 4" Cowl With Square Corners On The Scoop Slightly Lighter Than Original Due To Modern Steel Alloy Black EDP Coated Nice reproduction of the Camaro cowl induction hood. But, this one sits a little higher for a look that says you mean busines. Buy the best cowl induction hood for your Camaro from Rick's and know you are getting the best sheetmetal for your restoration. Learn More
$449.99 ea.
Camaro Billet Aluminum Hood Hinges, Clear Powder Coated Finish, 1967-1969 Part # 754078
High Quality Custom Hinges Shiny Clear Powder Coated Finish Means No Need To Ever Polish Manufactured Using 6061-T6 Aluminum Sealed Bearings For Maximum Smoothness And Longevity Integral Stainless Steel Gas Struts Stainless Steel Mounting Hardware Included Learn More
$624.99 pr.
Camaro Billet Aluminum Hood Hinges, Black Powder Coated Finish, 1967-1969 Part # 754078-B
High Quality Custom Hinges Maintenance Free Black Powder Coated Finish Manufactured Using 6061-T6 Aluminum Sealed Bearings For Maximum Smoothness And Longevity Integral Stainless Steel Gas Struts Stainless Steel Mounting Hardware Included Learn More
$624.99 pr.
Camaro Hood Pin Kit, Universal, Billet, Hotchkis, 1967-2014 Part # HD-58
Universal Fit Some Contoured Hoods May Not Be Able To Mount. Replace those old, rusty chrome hood pins on your Camaro with a pair of Ultra Trick, CNC Machined Aluminum Hood Pins from Hotchkis Sport Suspension. The Hard Annodized Finish gives a Hi Tech look to your car. The kit comes complete with Aluminum Pin, Stainless Hardware, Hood Pin Plates, and a Trick Aluminum Quick Release Pin. The Universal design makes it a great update for any Camaro. Learn More
$199.99 Kit
Camaro Trunk Lid, Aluminum, With Springs, 1967-1969 Part # PP-189
Make your 69 Camaro a true lightweight with these new, incredible aluminum body panels. Fits just like the original steel panels, and even look the same on the inside. Save precious pounds when installing AMDs aluminum body panels and bumpers. High-quality Aluminum Camaro body panels are EDP coated, look just like steel, but a lot lighter. The high strength premium aluminum sheet metal used to form these panels is surprisingly strong, and will hold up very well on your car. Did you know? Many people in our hobby refer to the trunk lid as a deck lid. Learn More

Was: $599.99 ea.

Now: $499.99 ea.
Camaro Hood, Fiberglass, Yenko, 1967, Nickey, 1968 & Baldwin Phase III - SS427, 1968-1969 Part # HD-7
High-Performance Upgrade Hand Laminated Fiberglass Custom Hood Reproduction Of Original Made In USA Best Fitting Version On Available A Camaro fiberglass hood will perfectly complement the performance look of your 1968 or 1969 RS, SS, or Z28 Camaro. The hood is the hinged cover that protects your classic’s engine and allows for easy maintenance and repair. In addition to the protection, the hood sets the style for the rest of the car to follow. This fiberglass hood secures your 1967 Yenko, 1968 Nickey, and 1968-1969 Baldwin Phase III originality and a mean appearance. It is constructed of fiberglass for added performance and flair. It is constructed of fiberglass for added performance and flair. Molded fiberglass parts allow for sleeker shapes and curves, increased gas mileage, and a more performance-oriented part. Heavy stamped sheet metal will slow your roll. Achieve peak-performance and an unparalleled expression with a new custom fiberglass hood for your 1968 and 1969 Z28, RS, and SS Chevy Camaro. Available at Rick’s Camaro today! Learn More
$859.99 ea.
Camaro Fiberglass Cowl Hood, 4" Scoop, Bolt On, 1967-1969 Part # HD-91
Fits Like A Steel Hood, But Saves Weight High Performace Upgrade From Stamped Sheet Metal Use Original Latch And Hinges Adds 4" To Hood For Clearance Smooth Underside Made In The USA A Camaro fiberglass hood will perfectly complement the performance look of your 1967, 1968, or 1969 classic. The hood is the hinged cover that protects your classic’s engine and allows for easy maintenance and repair. In addition to the protection, the hood sets the style for the rest of the car to follow. This fiberglass hood is a bolt-on cowl style model. Cowl induction hoods incorporate a backward-facing scoop to draw in the cool, high-pressure air that collects on the windshield at high speeds. It is constructed of fiberglass for added performance and flair. Molded fiberglass parts allow for sleeker shapes and curves, increased gas mileage, and a more performance-oriented part. Heavy stamped sheet metal will slow your roll. Achieve peak-performance and an unparalleled expression with a new custom cowl-styled fiberglass hood for your 1967, 1968, and 1969 Chevy Camaro. Available at Rick’s Camaro today!   Learn More
$499.99 ea.
Items: 1 to 28 of 32 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. Next
Grid  |  List
1