Skip to Main Content »

1-800-359-7717

Convertible Tops for 1968 Chevy Camaro Rs

0  Items Total: $0.00 View Cart Checkout

You're currently on:

1968 CHEVY CAMARO RS

Search Term: 'All Parts'
Category: 'Convertible Tops'
Vehicle: '1968 CHEVY CAMARO RS'

Items 1 to 28 of 64 total Page:
  1. 1
  2. 2
  3. 3
  4. Next
Show per page
View as: Grid  List  Sort by
Best Sellers
Camaro Convertible Top Tack Strip, 5/8" x 3/16", 1967-1969 Part # CV-51
Reproduction of Original Fits Bottom of Front Header Bow, Top of Front Header Bow and Middle roof support of Convertible Top Frame Sold by the Foot Eight feet Required per Car Other Tack Strip Required Sold as Our Part # CV-52 Convertible tack strips are prone to deteriorate over the years. A convertible Camaro roof has gone through many heat cycles and this really takes a toll on soft parts like the convertible tack strip. Give your top shop something to staple your brand new convertible top to...New convertible tack strip from Rick's First Generation.   Learn More
$2.99 ft.

Add to Wishlist

Camaro Convertible Top Tack Strip, 1/2" x 5/16", 1967-1969 Part # CV-52
Reproduction of Original Fits Rear Roof support of Convertible Top Frame Sold by the Foot Five feet Required per Car Other Tack Strip Required Sold as Our Part # CV-51 Convertible tack strips are prone to deteriorate over the years. A convertible Camaro roof has gone through many heat cycles and this really takes a toll on soft parts like the convertible tack strip. Give your top shop something to staple your brand new convertible top to...New convertible tack strip from Rick's First Generation. Learn More
$2.99 ft.

Add to Wishlist

Camaro Convertible Power Top Lift Cylinder, 1967-1969 Part # PTP-2
Exact, original quality reproduction cylinders fit, look and function as originals. Suggested to be replaced in pairs. Learn More
$114.99 ea.

Add to Wishlist

Camaro Convertible Top Boot Clip, 1967-1969 Part # CV-34
Top boot retainer clip available individually. Clip assembly and retainer. Each. Learn More
$3.99 ea.

Add to Wishlist

Camaro Pinchweld Molding Clips, Rear, Convertible Top, 1967-1969 Part # CV-86
Set of 10 special spring steel clips hold convertible rear pinchweld molding tight to body. Learn More
$36.99 Set

Add to Wishlist

Camaro Convertible Top Boot, With Clip Set, 1967-1969 Part # CV-38
Superior Reproduction Of The Original GM Top Boot Heavy-Weight, Technically Correct Stitching & Construction For The Most Demanding Restorer Complete With Installed Boot Clips Learn More
$189.99 ea.

Add to Wishlist

Camaro Convertible Top Header Bow Windlace, Black, 1967-1969 Part # CV-22
Grained trim piece along entire inside edge of the top frame header bow at windshield. Black. Learn More
$12.99 ea.

Add to Wishlist

Camaro Pinchweld Moldings, Rear, Convertible Top, 1967-1969 Part # CV-50
Polished stainless trim molding around rear of convertible top at body line. New reproduction in 2001 with nicely finished edges and accurate curves. Officially Licensed GM Restoration Parts from Classic Headquarters. Learn More
$141.99 pr.

Add to Wishlist

Camaro Convertible Power Top Hose, 1967-1969 Part # PTP-10
Reproduction Of Orignal Correct Opaque White Hoses WIth Correct Brass Fittings This Camaro reproduction convetible power top hose has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit, finish and function will work superbly for your restoration. In addition, using a reproduction convertible power top hose from Rick's will add authenticity and value to your Camaro. Learn More
$119.99 pr.

Add to Wishlist

Camaro Header Moldings, Convertible Top, Polished Chrome, 1967-1968Early Part # CV-7
Best Quality Reproduction Camaro Convertible Header Chrome Officially Licensed GM Restoration Part Triple Chrome Plated Fits Like Original GM Moldings Includes LH & RH Side The Camaro convertible header chrome moldings are the moldings which the convertible top weatherstripping comes into contact with at the top of the Camaro windshield. So, the header chrome really takes a beating from the elements and it is the first thing you see when you let the convertible top down on your Camaro. Rick's Camaros has the best quality molding for your Camaro convertible top header you can buy. This pair of moldings fits 1967, 1968 and 1969 standard Camaro, Super Sport (SS) and Rally Sport (RS) Convertibles. They are correct for 1967 and early 1968 and because of Ralph Nader they were changed for the silver coated header moldings early on in 1968. But, they may be used on a 1969 Camaro convertible with our chrome convertible sunvisor brackets for a custom touch. WARNING: These moldings fit very tightly to the Camaro convertible header and they must be installed properly to keep them from bending out of shape. Returns will not be accepted on moldings which have obviously been installed improperly and bent. Learn More
$106.99 pr.

Add to Wishlist

Camaro Convertible Top Rear Tack Strip Bolt Set, 1967-1969 Part # HW-82
Large hex head integral washer bolts attach the three piece metal U-channel tack strips to the inner body above the rain gutter. (Please note bolts have original size threads. Body screw holes are commonly enlarged and may require dolly or weld work). Learn More
$9.99 Set

Add to Wishlist

Camaro Convertible Top Boot Clip Set, 1967-1969 Part # CV-33
Restoration Correct Best Clips Currently Set Includes 16 Retainers And Clips Made In The USA Convertible Top Boot P/N CV-35 Secure your 1967, 1968 or 1969 Camaro convertible top boot the right way. Ricks Camaro offers a superior reproduction top boot clip set. Our Camaro convertible top clip set includes retainers for quick and easy installation. Plus the high strength clips are so durable, these may be the last 1967, 1968 or 1969 Camaro convertible top clips you'll ever buy. Learn More
$39.99 Set

Add to Wishlist

Camaro Convertible Top Rear Tack Strip Set, 1967-1969 Part # CV-81
Reproduction Of Original Galvanized Metal U-Channels With Embedded Tack Strips First Stapled To Rear Of Top Then Bolted To The Inner Body Above The Rain Gutter Made In The USA   This Camaro reproduction convertible top rear tack strip set has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit and function will work superbly for your restoration. In addition, using a reproduction convertible top rear tack strip set from Rick's will add authenticity and value to your Camaro.      Installation Note: When installing the largest tack strip bow, make sure you begin attaching it in the center and work your way out. This will insure the curvature is accurate to the convertible top frame.  Learn More
$109.99 ea.

Add to Wishlist

Camaro Convertible Top Frame Stoppers, 1967-1969 Part # CV-19
Rubber bumper stops assist in keeping top frame from damaging top fabric when folded. Two required. Pair only. Learn More

Was: $10.99 pr.

Now: $9.99 pr.

Add to Wishlist

Camaro Convertible Door Alignment Wedge Set, 1967-1969 Part # CV-85
Reproduction Of Original   This Camaro reproduction door alignment wedge set has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit; finish and function will work superbly for your restoration. In addition, using a reproduction door alignment wedge set from Rick's will add authenticity and value to your Camaro.   Learn More
$45.99 ea.

Add to Wishlist

Camaro Convertible Top Rain Gutter, 1967-1969 Part # CV-56
Reproduction Of Original Correct Injection Molded One Piece Design Flexible ABS Material Found On All 67-69 Convertible Camaros   This Camaro reproduction convertible top rain gutter has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit and function will work superbly for your restoration. In addition, using a convertible top rain gutter from Rick's will add authenticity and value to your Camaro.       Learn More
$166.99 ea.

Add to Wishlist

Camaro Convertible Power Top Switch & Housing, 1967-1968 Part # PTP-23
Licensed GM Reproduction Black Paddle Switch Die-cast Housing With (4) Retaining Clips Three Prong Switch 1-year Manufacturer's Warranty Rick's First Generation brings you a Superior Licensed reproduction of the Camaro Convertible top switch and housing. Classic Headquarters has reproduced a fully assembled Camaro Convertible top switch and housing to perfectly replace your old, worn original switch or that generic toggle switch someone put in your Camaro years ago. Learn More
$54.99 ea.

Add to Wishlist

Camaro Convertible Top Boot Snap Stud Set, 1967-1969 Part # CV-40
Studs Are Slightly Oversized For Better Fit Rear seat side well cover snap stud set for both RH & LH sides. Convertible top boot snaps attach to these. Learn More
$8.99 Set

Add to Wishlist

Camaro Convertible Top Frame Bolt & Pivot Kit, 1967-1969 Part # CV-53
Reproduction Of Orignal Fits Manual Or Power Top Frame Attaches Convertible Top Frame To Body 1 Kit Required Per Car   This Camaro reproduction convertible top frame bolt and pivot kit has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit, finish and function will work superbly for your restoration. In addition, using a reproduction convertible top frame bolt and pivot kit from Rick's will add authenticity and value to your Camaro. Learn More
$49.99 Kit

Add to Wishlist

Camaro Convertible Top Pads, 1967-1969 Part # CV-14
Top pads run the length of each side of the convertible top. Quality USA made. Pair only. Learn More
$34.99 pr.

Add to Wishlist

Camaro Pinchweld Molding Clip, Rear, Convertible Top, 1967-1969 Part # CV-8
Special spring steel clips holds rear pinchweld moldings tight to body, especially when the convertible top boot is attached. Ten required per car. (CV-86 set shown). Each. Learn More
$4.99 ea.

Add to Wishlist

Camaro Convertible Top Header Bow Stop Bumpers, 1967-1969 Part # CV-84
Correct reproduction. High density material and color as original. Packaged as pair. Learn More
$14.99 pr.

Add to Wishlist

Camaro Convertible Top Manual Top Hold-Down Latches, 1967-1969 Part # CV-9
Holds top frame in down position. For manual tops only. Learn More
$27.99 pr.

Add to Wishlist

Camaro Convertible Power Top Motor & Pump, 1967-1969 Part # PTP-4
Top quality components from Hydro-E-Lectric. Ready to install motorpump assembly with reproduction three point mounting system and correct electrical plug end. Motor mounting pad set included. Learn More
$279.99 ea.

Add to Wishlist

Camaro Convertible Top Rear Bow Binding End Clip, 1967-1969 Part # CV-13
Stainless cover pieces finish both ends of rear window top bow binding trim strip. Two required. Each Learn More
$9.99 ea.

Add to Wishlist

PUI Camaro Convertible Black Rear Well Liner, 1967-1969 Part # CV-41
Reproduction Of Original Heavy Weight Manufactured By PUI Quality Stitching and Fit Camaro convertible rear well liners by Parts Unlimited are a perfect way to enhance the appearance of your 1967, 1968, or 1969 Chevy Camaro. Not only will this crucial addition by PUI provide your classic with a complete look, it will also protect the undercarriage’s structure against road debris, rocks, dirt, and other damaging externalities. When it comes to your prized Camaro, style and protection are paramount. Let Rick’s Camaro facilitate your 1967, 1968, and 1969 with safeguard and flair. Secure your PUI Camaro convertible rear well liner today! Learn More
$59.99 ea.

Add to Wishlist

Items 1 to 28 of 64 total Page:
  1. 1
  2. 2
  3. 3
  4. Next
Show per page
View as: Grid  List  Sort by
1