Product Experts Available 1-800-359-7717

Filter Your Results

  1. Remove This Item CATEGORY: Starters
 

1968 CAMARO SS STARTERS

Search Term: 'All Parts'
Category: 'Starters'
Vehicle: '1968 CHEVY CAMARO SS'

25 Item(s) Sort by: Show: per page Grid  |  List
Best Sellers
Starter Heat Shield Part # 88-0176-1
Insulates Starter From Damaging Heat From Headers Or Exhaust Pipes Reflects 90 Of Radiant Heat Strap-On Connectors For Secure Tight Fitting Application 7" x 22" Blanket Learn More
$29.99 Kit
Camaro Starter Motor Mounting Bolt Set, Big Block, 1967-1969 Part # SB-20
Replacement Starter Bolts Outside Diameter: .370 Shaft Length: 3.600 Overall Length: 3.975 These Camaro replacement starter bolts has been manufactured to meet or exceed factory specifications and performance. You will find the fit and function will work perfectly for your Camaro. You will also be pleased to know that Rick's has sourced these starter bolts among other possible parts as the best choice for your repair or restoration project. Learn More
$6.99 pr.
Camaro Starter Motor Mounting Bolt Set, Small Block, 1967-1969 Part # SB-19
 Replacement Starter Bolts   These Camaro replacement starter bolts has been manufactured to meet or exceed factory specifications and performance. You will find the fit and function will work perfectly for your Camaro. You will also be pleased to know that Rick's has sourced these starter bolts among other possible parts as the best choice for your repair or restoration project. Learn More
$8.99 pr.
Camaro Starter Motor Brace, Big Block, 1967-1969 Part # RC-307
Original GM starter motor to block brace. Use with all 67-69 big block engines. Learn More
$11.99 ea.
Camaro Starter Motor Brace, Small Block, For Cars With 14" Flywheel, 1967-1969 Part # RC-337
Stock Replacement Fits Between Starter Motor & Block This stock replacement starter motor brace is manufactured by GM or by one of its authorized suppliers for use as a factory replacement part. You will find the fit, finish and function meets all GM specifications. Using stock replacement parts from Rick's, such as this starter motor brace, is a sound investment in the restoration or repair of your Camaro. Learn More
$7.99 ea.
Camaro Wiring Harness Retaining Clip, Starter Solenoid, 1967-1969 Part # STR-10
Holds wire harness and clamps around starter solenoid. Spring steel, made in the USA. Technically correct reproduction. Learn More
$24.99 ea.
Camaro Starter Motor Brace, Small Block, For Cars With 12-3/4" Flywheel, 1967-1981 Part # RC-339
Stock Replacement Fits Between Starter Motor & Block This stock replacement starter motor brace is manufactured by GM or by one of its authorized suppliers for use as a factory replacement part. You will find the fit, finish and function meets all GM specifications. Using stock replacement parts from Rick's, such as this starter motor brace, is a sound investment in the restoration or repair of your Camaro. Learn More

Was: $13.99 ea.

Now: $10.99 ea.
Camaro Starter Heat Shield Retaining Nut, 1967-1969 Part # STR-16
Slotted special nut holds heatshield to starter bolt. Original GM. Learn More
$7.99 ea.
Camaro Starter Motor Heat Shield, Big Block, Galvanized, 1967-1969 Part # STR-12
New galvanized steel reproduction starter heat shield replaces recently discontinued GM replacement (GM #361443) exactly. Very close in appearance to factory original. Learn More
$24.99 ea.
Camaro Starter Solenoid Heat Shield, Stainless Steel, 1967-1969 Part # STR-17
Not factory original, but extremely effective in shielding starter from manifold heat. Manufactured in stainless steel, fits all small and big block. Use STR-16 Retaining Nut. Learn More
$17.99 ea.
Camaro Solenoid, Starter Motor, 1967-1981 Part # STR-4
Stock Replacement This stock replacement starter solenoid is manufactured by GM or by one of its authorized suppliers for use as a factory replacement part. You will find the fit and function meets all GM specifications. Using stock replacement parts from Rick's, such as this starter solenoid , is a sound investment in the restoration or repair of your Camaro     Learn More

Was: $41.99 ea.

Now: $19.99 ea.
Camaro Solenoid Retaining Bolts, Starter Motor, 1967-1969 Part # STR-19
Correct style fillister head screws to mount solenoid to starter nose. **Note these fasteners are NOT included with reproduction starters. Learn More
$2.99 pr.
Camaro Engine Starter, Gear Reduction, Chrome, 1967-1969 Part # C-6584
For the chrome that gets you home, this Tuff Stuff 1.9hp gear reduction starter has twice the torque of the original starter making hot start problems a thing of the past. Manufactured with all new parts, it accepts 153 or 168 tooth flywheels and features an adjustable drive-end frame for added oil pan and header clearance. The triple chrome plated body adds a sharp dress-up touch to the engine compartment. New mounting bolts and necessary shims are included. Learn More
$199.99 ea.
Camaro Engine Starter Heat Shield Blanket, 1967-1969 Part # STR-13
Helps Keep Exhaust Heat Off Starter Ensures Easy Engine Starting Ideal For Solving Heat Related Starting Problems Protect your Camaro's starter and solenoid from exhaust manifold or header heat with this aluminized blanket. It withstands up to 1000F, wraps simply around the components and fastens to itself with Velcro. Trim to fit. Learn More

Was: $35.99 ea.

Now: $29.99 ea.
PowerMAX GM LS Natural Starter Part # 88-1612-3
Light-Weight Permanent Magnet Design Provides Higher Cranking Torque With Low Amperage Draw For Engines Up To 10:1 Compression 1.2kw Starter Motor And 6:1 Planetary Gear Ratio 12 Clocking Positions To Clear Headers, Kick Out Oil Pans, Factory Cooling Lines, And More Powermaster?s newest addition to the LS starter line is their Powermax starter. With a light-weight permanent magnet design, provides higher cranking torque with low amperage draw for engines up to 10:1 compression. A 1.2kw starter motor and 6:1 planetary gear ratio result in a 7.5lb starter that packs a big punch in a small package. 12 clocking positions allow the already featherweight starter to fit in even more positions to clear headers, kick out oil pans, factory cooling lines, and more. Learn More
$199.99 ea.
Camaro Engine Starter, Chrome, With Staggered Bolt Holes, 1967-1992 Part # C-3510
Replace the old starter on your Camaro's engine and give it a dress-up appearance at the same time. Manufactured with all new parts to factory specifications, this full size, triple chrome plated starter fits small or big blocks. All necessary shims are included for precise installation. Learn More
$144.99 ea.
Camaro Engine Starter, Small Block, For Cars With 14" Flywheel, ACDelco, 1967-1969 Part # STR-1
Remanufactured By ACDelco To Factory Specs Includes New Starter Solenoid Correct Show appearance Starter Has Staggered Bolt Hole Pattern Uses Equal Length Bolts Learn More
$84.99 ea.
Camaro Engine Starter, Small Block, High Torque, For Cars With 12-3/4" Flywheel, ACDelco, 1967-1969 Part # STR-2
Remanufactured By ACDelco To Factory Specs Includes New Starter Solenoid Correct Show appearance Starter Has Straight Bolt Hole Pattern Uses Short & Long Length Bolts Learn More
$119.99 ea.
Camaro Starter Motor Heat Shield, Big Block, Stainless Steel, 1967-1969 Part # STR-18
Manufactured in stainless steel as original in the USA. Technically correct reproduction starter heat shield found on all big blocks (GM# 3954224). For the demanding restorer. Learn More
$164.99 ea.
Camaro Engine Starter, For Cars With Manual Transmission, Chrome, 1967-1969 Part # C-3689
Replace the old starter on your Camaro's engine and give it a dress-up appearance at the same time. Manufactured with all new parts to factory specifications, this full size, triple chrome plated starter fits small or big blocks. This manual transmission version has the early cast iron nose. All necessary shims are included for precise installation. Recomended for manual and requires a 14" flywheel.   Learn More
$154.99 ea.
Camaro Starter Motor, Big Block, High Torque, For Cars With14" Flywheel, 1967-1969 Part # STR-3
Replacement Starter Motor Includes New Starter Solenoid Correct Show appearance Starter Has Staggered Bolt Hole Pattern Uses Equal Length Bolts Learn More
$89.99 ea.
Camaro Starter, Chrome, With Straight Bolt Holes, 1967-1992 Part # C-3631
Replace the old starter on your Camaro's engine and give it a dress-up appearance at the same time. Manufactured with all new parts to factory specifications, this full size, triple chrome plated starter fits small or big blocks. All necessary shims are included for precise installation. Recomended for automatic and requires a 14" flywheel. Learn More
$159.99 ea.
Camaro Wiring Harness Retaining Clip, Starter Solenoid, 1967-1969 Part # STR-8
Reproduction Of Original Hold Harness To Starter Solenoid Made In The USA   This Camaro reproduction starter solenoid wiring harness retaining clip has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit and function will work superbly for your restoration. In addition, using a reproduction starter solenoid wiring harness retaining clip from Rick's will add authenticity and value to your Camaro.       Learn More
$24.99 ea.
Camaro Engine Starter, 396ci, With Cast Iron Nose, 1967-1968 Part # STR-20
Reproduction Of Original Delco P/N 1107365 Remanufactured To Factory Specs Includes New Starter Solenoid Starter Has Staggered Bolt Hole Pattern Uses Equal Length Bolts Learn More
$349.99 ea.
25 Item(s) Sort by: Show: per page Grid  |  List
1