Skip to Main Content »

1-800-359-7717

Exhaust for 1968 Chevy Camaro Ss

0  Items Total: $0.00 View Cart Checkout

You're currently on:

1968 CHEVY CAMARO SS

Search Term: 'All Parts'
Category: 'Exhaust'
Vehicle: '1968 CHEVY CAMARO SS'

Items 1 to 28 of 68 total Page:
  1. 1
  2. 2
  3. 3
  4. Next
Show per page
View as: Grid  List  Sort by
Best Sellers
Camaro Aluminized Dual Exhaust System, Repair Approved, 1967-1974 Part # MS-1951
Best Quality Reproduction Exhaust System For Camaro 14 Gauge System Tail Pipes Have Correct Bends And Exit Path Aluminized Steel Stock Appearing Transverse Muffler 1967-1968 Exit Behind Rear Tire 1969 Exits Out Rear Of Car Not every 1967, 1968,1969, 1970, 1971, 1972, 1973 or 1974 Camaro owner needs an expensive, technically correct dual exhaust system for their daily driver or weekend cruiser. They just need a quality system that keeps the exhaust flowing out of their stock or mildly modified Chevy small block engine quietly. Rick's Camaros has just the system you need for your classic. All of our Camaro dual exhaust systems are professionally mandrel bent to fit like the original exhaust system did. Look to the professionals at Rick's Camaros for all your 1967, 1968, 1969, 1970, 1971, 1972, 1973 or 1974 Standard Camaro, Super Sport (SS), Rally Sport (RS), Type LT or Z28 exhaust needs. Learn More
Click to view price.

Camaro Stainless Steel Dual Exhaust System, Show Correct, 1967-1969 Part # MS-1952
Show Quality Stainless Steel Exhaust For Camaro Correct Factory Style Dual Exhaust Pipes Stainless Steel Transverse Muffler Correct Factory Style Tail Pipes Available For Small Block And Big Block Applications Lifetime Warranty Restore your 1967, 1968 or 1969 Camaro's exhaust to the original showroom look and sound with a stainless steel dual exhaust system from Rick's Camaros. Our show correct dual exhaust systems are meticulously patterned after the factory originals. Starting at the exhaust manifolds, these new pipes extend all the way back to the over-axle pipes, efficiently routing exhaust gasses into the correct transverse muffler before they exit through properly bent tailpipes that are cut to the precise angle used by GM. Recreate the sound of the sixties with this original style dual exhaust system for your 1969 Camaro. Learn More
Click to view price.

Camaro Exhaust Manifold Heat Riser Gasket, Small Block, 1967-1974 Part # RC-140B
Replacement Exhaust Manifold Heat Riser Gasket 1 Required Per Car This exhaust manifold heat riser gasket fits between the exhaust manifold and the heat riser on the passenger's side exhaust head pipe. It can be used with our exhaust heat riser eliminator if you do not want to run a heat riser on your Camaro. Buy the best for your restoration today from Rick's All Generations.  Learn More
$2.99 ea.

Add to Wishlist

Camaro Exhaust Pipe Packing, Small Block, 1967-1981 Part # RC-118
Reproduction Exhaust Pipe Packing Two Required Per Car Fits Small Block Applications 2" Diameter Exhaust Donut Gasket Your Camaro’s exhaust packing lies between the manifold and head pipe. Rick’s Camaros offers this superb reproduction of the original 1967-1981  exhaust packing or donut gasket.  This heat resistant gasket seals any exhaust leaks that may occur between the header pipe and the exhaust manifold.  Replacing the exhaust packing ensures your Camaro exhaust project will be a success. Stop your 1967, 1968, 1969, 1970, 1971,1 972,1 973, 1974, 1975, 1976, 1977, 1978, 1979, 1980 or 1981 Camaro exhaust leaks before they start with new exhaust packing gaskets from Rick’s Camaros. Learn More
$2.99 ea.

Add to Wishlist

Camaro Dual Exhaust Kit, 3", Flowmaster, 1967-1969 Part # AES-45
Experience the famous Flowmaster American Thunder sound by installing this dual exhaust system on your Camaro. In addition to the commanding V-8 exhaust note, the improved exhaust flow increases horsepower and efficiency on small or big block engines. Starting from the transmission crossmember, you have a full 3" pipe diameter all the way back to the rear factory location exit. Equipped with Delta Flow Super Series 40 mufflers for a deep powerful sound with low interior resonance, this complete kit includes aluminized tubing, an H-pipe and all necessary hardware for an easy bolt-on installation. This system does not fit convertible models. Learn More
$729.99 ea.

Add to Wishlist

Camaro Dual Exhaust Kit, 2-1/2", Flowmaster, 1967-1968 Part # AES-46
Header Back System Experience the famous Flowmaster American Thunder sound by installing this dual exhaust system on your Camaro. In addition to the commanding V-8 exhaust note, the improved exhaust flow increases horsepower and efficiency on small or big block engines. Starting from the transmission crossmember, you have 2-1/2" pipe diameter all the way back to the rear factory location exit. Equipped with Delta Flow Series 40 mufflers for a deep powerful sound with low interior resonance, this complete kit includes aluminized tubing, an H-pipe and all necessary hardware for an easy bolt-on installation. This system does not fit convertible models. Learn More
$439.99 ea.

Add to Wishlist

Doug's Headers, Full Length Steel Ceramic Coated, Big Block 572, For Cars Without Air Conditioning, 1967-1969 Part # AES-49
For Use With Manual Or Automatic Transmission Provide Outstanding Torque & Horsepower Over A Wide RPM Band Ceramic Coated For Long Life & Good Looks Bolt-On Installation Header Tube Size Is 2-1/8" & Collector Size Is 3-1/2" For Off-Road Use Only/Not Legal For Sale Or Use In California Includes Header Gaskets, All Mounting Hardware & Instructions Must Use Big Block Frame Stands Will fit 572 tall deck (10.2 in.) crate engine or equivalent When it's time to select headers for the street your most important criteria should be the most torque and horsepower over widest possible RPM band. And Doug's Headers deliver both in a big way. These 1967, 1968, 1969 headers are tuned with the proper tube size and length to efficiently remove all of the exhaust from each cylinder and reducing pumping losses. In addition you will find the fit and finish are superb and you'll have years of leak-free operation because of Doug's extra thick flanges. Trust Rick's Camaros for all your 1967, 1968, 1969 Camaro needs! Learn More
$911.99 ea.

Add to Wishlist

Doug's Headers, Full-Length Steel Ceramic Coated, Big Block, With Air Conditioning, 1967-1969 Part # AES-47
Provide Outstanding Torque & Horsepower Over A Wide RPM Band Ceramic Coated For Long Life & Good Looks Bolt-On Installation Header Tube Size Is 2" & Collector Size Is 3-1/2" SAP Port Shape For Off-Road Use Only/Not Legal For Sale Or Use In California Includes Header Gaskets, All Mounting Hardware & Instructions Fits Both Manual And Automatic Transmission When it's time to select headers for the street your most important criteria should be the most torque and horsepower over widest possible RPM band. And Doug's Headers deliver both in a big way. These 1967, 1968, 1969 headers are tuned with the proper tube size and length to efficiently remove all of the exhaust from each cylinder and reducing pumping losses. In addition you will find the fit and finish are superb and you'll have years of leak-free operation because of Doug's extra thick flanges. Trust Rick's Camaros for all your 1967, 1968, 1969 Camaro needs! Learn More
$768.99 ea.

Add to Wishlist

Doug's Headers, Full Length Steel Ceramic Coated, 302-350, For Cars Without Air Conditioning, 1967-1969 Part # AES-48
Provide Outstanding Torque & Horsepower Over A Wide RPM Band Ceramic Coated For Long Life & Good Look Bolt-On Installation Header Tube Size Is 1-3/4" & Collector Size Is 3" For Off-Road Use Only/Not Legal For Sale Or Use In California Includes Header Gaskets, All Mounting Hardware & Instructions Fits D-Port Cylinder Heads Including ZZ4 Crate Engines Will Not Fit With Saginaw Close Ratio 825 Steering Box Will Fit Most Angle Plug Heads Including Factory Chevrolet Bow-Tie Heads Requires Removal Or Modification Of Locking Steering Columns If Equipped Fits Both Manual And Automatic Transmission When it's time to select headers for the street your most important criteria should be the most torque and horsepower over widest possible RPM band. And Doug's Headers deliver both in a big way. These 1967, 1968, 1969 headers are tuned with the proper tube size and length to efficiently remove all of the exhaust from each cylinder and reducing pumping losses. In addition you will find the fit and finish are superb and you'll have years of leak-free operation because of Doug's extra thick flanges. Trust Rick's Camaros for all your 1967, 1968, 1969 Camaro needs! Learn More
$614.99 ea.

Add to Wishlist

Doug's Headers, Full Length Steel, Ceramic Coated, 5.7, LS1, LS6, 1967-1969 Part # AES-51
Direct-Fit For A 1st Generation Camaro Fits LS Family Engines Improves Horsepower & Torque Ceramic Coated Finish 1-3/4" Header Tubes 3" Collector Reducer O2 Sensor Fittings Installed Not Legal For Sale Or Use In California When you're ready to put some serious horsepower to the ground with your Camaro, consider a Doug's LS1 Long Tube Header Kit. These 1967, 1968, 1969 headers are perfect for your LS1 conversion. Doug's headers come with a thick 3/8" flange and 16 gauge tubing for added durability and trouble-free maintenance.Doug's headers are tuned with the proper tube size and length to efficiently remove all the exhaust from each cylinder and reduce pumping losses. The kit includes all mounting hardware and Doug's Premium Gaskets. This product is for OFF-ROAD use only. Will work with both automatic and manual transmissions. Trust Rick's Camaros for all your 1967, 1968, 1969 Camaro needs! Learn More
$624.99 Set

Add to Wishlist

Camaro Chrome Shorty Headers, Small Block, 1967-1981 Part # 33-10266
Will Not Fit 1967-1969 Z28 or 1967-1969 W/ A/C Will Not Fit Saginaw Close Ratio 825 Power Steering Box Includes Studs, Nuts, & Flange Gaskets Imported Rick's Camaro is proud to introduce these high quality chrome shorty headers at an affordable price. These headers will make your engine compartment look better plus add some horsepower to the rear wheels. These shorty headers have 1 5/8" tubing, a 3/8" flange, and a big 3" collector end. NOTE: Driver side is 25" total length, passenger side is 26" total length. NOTE: Not for use on pollution-controlled vehicles. Learn More
$199.99 Set

Add to Wishlist

Camaro Black Shorty Headers, Small Block, 1967-1981 Part # 33-10267
Will Not Fit 1967-1969 Z28 or 1967-1969 W/ A/C Will Not Fit Saginaw Close Ratio 825 Power Steering Box Includes Studs, Nuts, & Flange Gaskets Imported Rick's Camaro is proud to introduce these high quality painted black shorty headers at an affordable price. These headers will make your engine compartment look better plus add some horsepower to the rear wheels. These shorty headers have 1 5/8" tubing, a 3/8" flange, and a big 3" collector end. NOTE: Driver side is 25" total length, passenger side is 26" total length. NOTE: Not for use on pollution-controlled vehicles. Learn More
$179.99 Set

Add to Wishlist

Camaro Ceramic Coated Shorty Headers, Small Block, 1967-1981 Part # 33-10268
Will Not Fit 1967-1969 Z28 or 1967-1969 W/ A/C Will Not Fit Saginaw Close Ratio 825 Power Steering Box Includes Studs, Nuts, & Flange Gaskets Imported Rick's Camaro is proud to introduce these high quality ceramic coated shorty headers at an affordable price. These headers will make your engine compartment look better plus add some horsepower to the rear wheels. These shorty headers have 1 5/8" tubing, a 3/8" flange, and a big 3" collector end. NOTE: Driver side is 25" total length, passenger side is 26" total length. NOTE: Not for use on pollution-controlled vehicles. Learn More
$249.99 Set

Add to Wishlist

Camaro BBK 2-1/2" Vari-Tune Adjustable Stainless Steel Performance Muffler, Offset Part # 33-11209
High-Performance Universal Muffler Rectangular Case, 2 1/2" Inlet Diameter, Offset Chambered Internal Construction Stainless Steel Construction With Natural Finish Closed End Cap, Standard Outlet Without Tip   Camaro universal Vari-tune mufflers are a great performance addition for any Camaro. American designed and built, these performance mufflers are one of a kind, offering a muffler that can be adjusted for sound and horsepower by just moving the adjustment screw under the car. The unique design of this superb muffler allows side-to-side tuning to cut out the drowning or resonance that often happens when at a low rpm. Available aluminized or in stainless steel and in 2.5", 2.75", and 3.0", these mufflers are offered in various offsets to insure proper fit on most aftermarket and OEM applications. When you are in the market for a new high-performance muffler, invest in a BBK universal Varitune muffler. Available at Rick's Camaro today! Learn More
$139.99 ea.

Add to Wishlist

Camaro Exhaust System, Borla, Header Back, Big Block, 1967-1969 Part # 33-10249
Improve Horsepower And Torque Aggresive Muscle Sound Stainless Steel Construction Bolt On Installation Fits All Transmissions Learn More
$999.99 Set

Add to Wishlist

Camaro BBK 3" Vari-Tune Adjustable Stainless Steel Performance Muffler, Offset Part # 33-11199
High-Performance Universal Muffler Rectangular Case, 3" Inlet Diameter, Offset Chambered Internal Construction Stainless Steel Construction With Natural Finish Closed End Cap, Standard Outlet Without Tip   Camaro universal Vari-tune mufflers are a great performance addition for any Camaro. American designed and built, these performance mufflers are one of a kind, offering a muffler that can be adjusted for sound and horsepower by just moving the adjustment screw under the car. The unique design of this superb muffler allows side-to-side tuning to cut out the drowning or resonance that often happens when at a low rpm. Available aluminized or in stainless steel and in 2.5", 2.75", and 3.0", these mufflers are offered in various offsets to insure proper fit on most aftermarket and OEM applications. When you are in the market for a new high-performance muffler, invest in a BBK universal Varitune muffler. Available at Rick"s Camaro today! Learn More
$139.99 ea.

Add to Wishlist

Camaro BBK 3" Vari-Tune Adjustable Aluminized Steel Performance Muffler, Offset Part # 33-11210
High-Performance Universal Muffler Rectangular Case, 3" Inlet Diameter, Offset Chambered Internal Construction Steel Construction With Aluminized Finish Closed End Cap, Standard Outlet Without Tip   Camaro universal Vari-tune mufflers are a great performance addition for any Camaro. American designed and built, these performance mufflers are one of a kind, offering a muffler that can be adjusted for sound and horsepower by just moving the adjustment screw under the car. The unique design of this superb muffler allows side-to-side tuning to cut out the drowning or resonance that often happens when at a low rpm. Available aluminized or in stainless steel and in 2.5", 2.75", and 3.0", these mufflers are offered in various offsets to insure proper fit on most aftermarket and OEM applications. When you are in the market for a new high-performance muffler, invest in a BBK universal Varitune muffler. Available at Rick's Camaro today! Learn More
$114.99 ea.

Add to Wishlist

Camaro BBK 2-3/4" Vari-Tune Adjustable Aluminized Steel Performance Muffler, Offset Part # 33-11211
High-Performance Universal Muffler Rectangular Case, 2 3/4" Inlet Diameter, Offset Chambered Internal Construction Steel Construction With Aluminized Finish Closed End Cap, Standard Outlet Without Tip   Camaro universal Vari-tune mufflers are a great performance addition for any Camaro. American designed and built, these performance mufflers are one of a kind, offering a muffler that can be adjusted for sound and horsepower by just moving the adjustment screw under the car. The unique design of this superb muffler allows side-to-side tuning to cut out the drowning or resonance that often happens when at a low rpm. Available aluminized or in stainless steel and in 2.5", 2.75", and 3.0", these mufflers are offered in various offsets to insure proper fit on most aftermarket and OEM applications. When you are in the market for a new high-performance muffler, invest in a BBK universal Varitune muffler. Available at Rick's Camaro today! Learn More
$109.99 ea.

Add to Wishlist

Camaro Exhaust Manifold, Small Block, Without Smog Fittings, Left, 1967, For Cars With Automatic Transmission, 1968 Part # ES-679
Subject to availability. Please call Technical Services when specific date codes or unlisted manifolds are required. Learn More
$144.99 ea.

Add to Wishlist

Camaro BBK 2-3/4" Vari-Tune Adjustable Stainless Steel Performance Muffler, Offset Part # 33-11208
High-Performance Universal Muffler Rectangular Case, 2 3/4" Inlet Diameter, Offset Chambered Internal Construction Stainless Steel Construction With Natural Finish Closed End Cap, Standard Outlet Without Tip   Camaro universal Vari-tune mufflers are a great performance addition for any Camaro. American designed and built, these performance mufflers are one of a kind, offering a muffler that can be adjusted for sound and horsepower by just moving the adjustment screw under the car. The unique design of this superb muffler allows side-to-side tuning to cut out the drowning or resonance that often happens when at a low rpm. Available aluminized or in stainless steel and in 2.5", 2.75", and 3.0", these mufflers are offered in various offsets to insure proper fit on most aftermarket and OEM applications. When you are in the market for a new high-performance muffler, invest in a BBK universal Varitune muffler. Available at Rick's Camaro today! Learn More
$139.99 ea.

Add to Wishlist

Camaro Exhaust Manifold Air Injection Smog Tubes, 396ci, 1968 Part # AIR-3
Reproduction Smog Air Injection Tubes Without Air Conditioning Improves Air Emissions For 396 Engines Fits 1968 1st Gen Camaro Models The exhaust manifold air injection tubes are important for reducing the exhaust smog fumes from your 1968 first generation Camaro. Especially when starting up your car, the engine can emit a heavy amount of smog, which can be harmful to your F-Body, as well as the space around your car. Rick's Camaros now offers these reproduction smog tubes, also known as air injection reactor tubes from the Air Injection Reactor (AIR) engine system, manufactured to replace your original worn tubes. Acting as a smog inhibitor pump to instead emit clean air, these air injection tubes will vastly improve your air emissions. Each tube is manufactured with correct bends and outlets for installation onto the exhaust manifold. A correct threaded outlet head is installed for easy installation of the smog pump check valves, and is produced in steel and zinc plating, including a semi-gloss black finish. Aside from looking great among your engine compartment, these smog tubes are a great environmental decision for your Chevy Camaro. From racers, show cars, hot rods, and daily drivers, you can trust Rick's Camaros for all of your restoration and replacement needs for your 1968 1st gen Camaro! Learn More
$139.99 pr.

Add to Wishlist

Camaro Exhaust Manifold, Big Block, With Smog Fittings, Right, 1968-1969 Part # ES-178A
Subject to availability. Please call Technical Services when specific date codes or unlisted manifolds are required. Learn More

Regular Price: $109.99 ea.

Sale Price: $94.99 ea.

Add to Wishlist

Camaro Exhaust Manifold, Big Block, Without Smog Fittings, Right, 1968-1969 Part # ES-178
Subject to availability. Please call Technical Services when specific date codes or unlisted manifolds are required. Learn More

Regular Price: $109.99 ea.

Sale Price: $94.99 ea.

Add to Wishlist

Camaro Exhaust Manifold Air Injection Smog Tubes, 302, 327 & 350ci, 1968 Part # AIR-2
Reproduction Smog Air Injection Tubes Without Air Conditioning Improves Air Emissions For 302, 327, & 350 Engines Fits 1968 1st Gen Camaro Models The exhaust manifold air injection tubes are important for reducing the exhaust smog fumes from your 1968 first generation Camaro. Especially when starting up your car, the engine can emit a heavy amount of smog, which can be harmful to your F-Body, as well as the space around your car. Rick's Camaros now offers these reproduction smog tubes, also known as air injection reactor tubes from the Air Injection Reactor (AIR) engine system, manufactured to replace your original worn tubes. Acting as a smog inhibitor pump to instead emit clean air, these air injection tubes will vastly improve your air emissions. Each tube is manufactured with correct bends and outlets for installation onto the exhaust manifold. A correct threaded outlet head is installed for easy installation of the smog pump check valves, and is produced in steel and zinc plating, including a semi-gloss black finish. Aside from looking great among your engine compartment, these smog tubes are a great environmental decision for your Chevy Camaro. From racers, show cars, hot rods, and daily drivers, you can trust Rick's Camaros for all of your restoration and replacement needs for your 1968 1st gen Camaro! Learn More
$109.99 pr.

Add to Wishlist

Camaro Exhaust Manifolds, Big Block, With Smog Fittings, 1967-1969 Part # RC-622
Nice reproductions with casting numbers (LH 3909879, RH 3916178) of originals. Fits all 67-69 big blocks. No volume discount. Ships Oversize. Learn More
$349.99 pr.

Add to Wishlist

Camaro BBK 2-1/2" Vari-Tune Adjustable Aluminized Steel Performance Muffler, Offset Part # 33-11212
High-Performance Universal Muffler Rectangular Case, 2 1/2" Inlet Diameter, Offset Chambered Internal Construction Steel Construction With Aluminized Finish Closed End Cap, Standard Outlet Without Tip   Camaro universal Vari-tune mufflers are a great performance addition for any Camaro. American designed and built, these performance mufflers are one of a kind, offering a muffler that can be adjusted for sound and horsepower by just moving the adjustment screw under the car. The unique design of this superb muffler allows side-to-side tuning to cut out the drowning or resonance that often happens when at a low rpm. Available aluminized or in stainless steel and in 2.5", 2.75", and 3.0", these mufflers are offered in various offsets to insure proper fit on most aftermarket and OEM applications. When you are in the market for a new high-performance muffler, invest in a BBK universal Varitune muffler. Available at Rick's Camaro today! Learn More
$109.99 ea.

Add to Wishlist

Camaro Exhaust Manifolds, Small Block, Without Smog Fittings, 1967-1968 Part # RC-627
Nice reproductions with casting numbers (LH 3892679, RH 3840912). Fits all 1967-68 small blocks. Learn More
$319.99 pr.

Add to Wishlist

Camaro Exhaust Muffler, Transverse, 1967-1969 Part # AES-15
Replacement Muffler Aluminized Steel Works Well With Original Systems Outlet ID 2" Inlet ID 2 1/4" Nice replacement muffler for use with original exhaust systems. Not a 100% correct piece but looks very close to original when installed. Exhaust clamps available separately to properly finish the install. Buy the best parts for your Camaro today from Rick's and know you are getting the best! Learn More
$89.99 ea.

Add to Wishlist

Items 1 to 28 of 68 total Page:
  1. 1
  2. 2
  3. 3
  4. Next
Show per page
View as: Grid  List  Sort by
1