Product Experts Available 1-800-359-7717

1968 CAMARO STANDARD LIGHTS

Search Term: 'All Parts'
Category: 'Lights'
Vehicle: '1968 CHEVY CAMARO STANDARD'
Items: 1 to 28 of 53 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. 3
  4. Next
Grid  |  List
Best Sellers
Camaro Headlight Retaining Ring, 1967-1975 Part # HH-15
Reproduction Of Original Round Inner Ring Which Holds The Headlight Bulb To The Headlight Bucket 1" Width 2 Required Per Car Comes With Screws With Oval Hole Replaces GM #5950248 Headlight bezels on your 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, or 1975 Camaro take several hits over the years, leaving them bruised and battered. Harsh weather conditions damage your headlight bezels while road dirt and rocks beat and sandblast the finish away. Over time, your Chevrolet Camaro bezels start looking tired, and nothing looks worse on a fresh restoration than tired and worn headlight bezels. Rick's Camaros has the solution for you! Our Chevy Camaro headlight sealed beam retaining ring is an accurate reproduction, has correct ring width, and is in original high polished stainless material. The round inner ring holds the headlight bulb to the headlight bucket. From race, restoration or daily drivers, Rick's Camaros is always sourcing from the world’s top manufacturers to bring you the very best 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, and 1975 Camaro headlight bezels possible. Learn More
$12.99 ea.
Camaro Headlight Adjusting Screw & Nut, 1967-1968 Part # HH-14
Reproduction Of Original Correct Screw and Nut Set Set Covers One Headlamp 4 Required Per Car Fits 1967 Or 1968 1st Gen Camaros The headlights are vital on your 1967 or 1968 first generation Camaro, especially when driving at night or in harsh weather conditions. It is possible over time that your head light assembly can become loose, and you may have misplaced your adjusting screw. Each headlamp required an adjusting screw and nut to keep it secure and ready to use while driving. Rick's Camaros offers this new headlight adjusting screw and nut for your F-Body, ready to install in your headlight. This set covers one of your Camaro's head lamps, however four are required to complete your car. Go ahead and get enough for each of your headlights so you can rest assured while on the road. From racers, show cars, hot rods, and daily drivers, you can trust Rick's Camaros for all of your restoration and replacement needs for your 1967 or 1968 1st gen Camaro! Learn More
$1.50 Set
Camaro Side Marker Light Bezel, Chrome, 1968 Part # MB-25
Show Quality Reproduction Bright Chrome Over Die-Cast As Original Exact Fit Fits Front Or Rear Fender Four Required Per Car Dull chrome accents on new paint is definitely the way to have people be less than impressed with your 1968 Camaro. The bezels on your F-Body can become rusted and scratched up, ruining the look of your sider marker lights. This superior repoduction of the original side light marker bezel is definitely the way to go to make a new paint job pop! Rick's Camaros is proud to offer this side marker light bezel to make your restoration stand out in the crowd. This show quality reproduction is heavy chrome and promises an exact fit for your F-Body's front or rear. These chrome bezels are sold individually, and four are required per vehicle. Trust Rick's Camaros for all of your restoration and replacement needs for your 1968 1st gen Camaro! Learn More
$6.99 ea.
Camaro, License Lamp Assembly, Reproduction, 1967-1969 Part # LP-38
Best Quality Reproduction License Lamp Assembly 12" Brown Lead Wire With Grommet Black Connector & White Lens Gasket Gold Cad Plated Housing Crystal Clear Lens With Correct Lettering Script Includes Plated Screws For 1st Gen Models Camaro clear plastic parts do one of two things over time, they can turn milky and hazy or completely fall apart. Camaro gold cad plating will turn chalky over time. Both of these are main components of your Camaro license lamp assembly. Rick's Camaros offers this superior reproduction 1967, 1968 or  1969 first generation Camaro license lamp assembly to replace that ugly, rusted one on your Camaro. This reproduction assembly includes cad plated housing, socket with bulb, brown color lead wire with grommet and correct black terminal end, crystal clear lens with script, white colored lens gasket, and plated screws. This license lamp assembly is just another one of the best quality parts Rick's Camaros brings you to keep your Camaro Super Sport (SS), Rally Sport (RS), Z28 or Standard correct and looking great always at the best possible price. From racers, show cars, hot rods, and daily drivers, you can trust Rick's Camaros for your restoration and replacement needs for your 1967, 1968, or 1969 1st gen Camaro! Learn More
$22.99 ea.
Camaro Headlight Sealed Beam, 1967-1981 Part # HH-18
High Quality Original Style Replacement 50 Watts Low Beam, 60 Watts High Beam Sealed Beam Dual Filament Sold Each Two Required per Car Correct T3 Headlights Available as our Part # LT-30 Is it time to refurbish the headlights on your beautiful 1967-1981 Chevrolet Camaro? Rick's Camaro's offers this replacement sealed beam headlight with the budget-minded Camaro restorer in mind. Not everyone needs technically correct T-3 headlights in their Chevy Camaro so Rick's found this bulb from a major replacement headlight manufacturer with that in mind. Don't drive down that long, dark road coming home from your local cruise in without the proper lighting in the front of your Camaro. Replace your old headlights on your 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981 Camero today with quality parts from Rick's Camaro. Learn More

Was: $11.99 ea.

Now: $9.99 ea.
Camaro Side Marker Light Lens Assembly, Fender, Clear, 1968 Part # MB-3
Superior Reproduction of Original Officially Licensed GM Restoration Part Clear Lens Correct "Guide" Lettering and Script On Clear Lens Sold Individually Two Required Per Car Complete Set Available Separately as Part # MB-27 1968 Camaro fender side marker lenses serve a critical purpose. Not only do new Camaro front fender side maker lenses look great against a freshly painted body or fresh restoration, but are a must for visibility on low light or foggy days. Typically faded cracked or simply missing over the years, these Chevrolet lenses are a must have in most states just to pass inspection. Rick's Camaros is proud to offer these high quality reproduction 1968 fender side marker lens, painstakingly reproduced to original factory specification using on the most modern techniques, and finest quality materials. This accurate reproduction clear side marker light lens has the correct text and script and promises to be an easy installation. Simply unscrew your original front side markers, unplug the harness and pop these new ones in. Trust Rick's Camaros for all of your restoration and replacement needs for your 1968 1st gen Camaro!    NOTE: 1968 Camaro front side marker bulbs (Our Part # LT-8) are amber in color. Learn More
$13.99 ea.
Camaro Headlight Retaining Ring Mounting Screw Set, 1967-1973 Part # HH-17
Correct Reproduction Retains Headlamp Retaining Ring HH-15 1 Kit Required Per Car   Headlight bezels on your 1967, 1968, 1969, 1970, 1971, 1972, or 1973 Camaro take several hits over the years, leaving them bruised and battered. Harsh weather conditions damage your headlight bezels while road dirt and rocks beat and sandblast the finish away. Over time, your Chevrolet Camaro bezels start looking tired, and your headlight retaining ring has trouble holding the headlight bulb to the headlight bucket. Whether the screws have gotten lost are broken, the retaining ring will no longer be able to retain your Camaro's headlight. Rick's Camaros has the solution for you! Our Chevy Camaro headlight retaining ring mounting screw set is a kit made up of six mounting screws. This set is all you need to keep your headlight bulbs secure.. From race, restoration or daily drivers, Rick's Camaros is always sourcing from the world’s top manufacturers to bring you the very best 1967, 1968, 1969, 1970, 1971, 1972, or 1973 Camaro headlight bezels possible. Learn More
$2.99 Set
Camaro Side Marker Light Lens Assembly, Quarter Panel, Red,1968 Part # MB-4
Superior Reproduction of Original Officially Licensed GM Restoration Part Red Lens Correct "Guide" Lettering and Script On Clear Lens Sold Individually Two Required Per Car Complete Set Available Separately as Part # MB-27 1968 Camaro fender side marker lenses serve a critical purpose. Not only do new Camaro front fender side maker lenses look great against a freshly painted body or fresh restoration, but are a must for visibility on low light or foggy days. Typically faded cracked or simply missing over the years, these Chevrolet lenses are a must have in most states just to pass inspection. Rick's Camaros is proud to offer these high quality reproduction 1968 fender side marker lens, painstakingly reproduced to original factory specification using on the most modern techniques, and finest quality materials. This accurate reproduction red side marker light lens has the correct text and script and promises to be an easy installation. Simply unscrew your original front side markers, unplug the harness and pop these new ones in. Trust Rick's Camaros for all of your restoration and replacement needs for your 1968 1st gen Camaro! NOTE: 1968 Camaro front side marker bulbs (Our Part # LT-8) are amber in color. Learn More
$12.99 ea.
$4.99 ea.
Camaro Taillight Lens Gaskets, 1967-1968 Part # WS-51
Dense foam correct color lens to housing seals. RH and LH pair. Learn More
$6.99 pr.
Camaro Taillight Housing To Body Gaskets, Molded, 1967-1968 Part # WS-98
Best Quality Reproduction Tail Light Housing Gaskets Heavy Density Injection Molded Thick Rubber Seal As Original Seals Are Molded To Fit The Bezel Just Like The Originals Seals Much Better Than Generic Foam Gaskets Sold As A Pair The old cheap foam taillight housing gaskets on your 1967 or 1968 Camaro have most likely won't protect the space between your taillight and body for a long time. They can become worn down from the weather, deteriorating and leaving your trunk and spatter paint exposed to rainwater. Rick's Camaros wants to ensure your F-Body's rear section is protected, by offering these accurate reproduction taillight housing to body gaskets. These gaskets are the best defense against the elements because they were actually designed to fit the bezel and tail pan to seal like the originals. These are made from heavy density molded rubber, with a far superior sealing and appearance to the cheap foam gaskets. Don't wait to replace your tail light housing gaskets, and feel confident while on the road. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967 or 1968 1st gen Camaro! Learn More

Was: $23.99 pr.

Now: $21.99 pr.
Camaro Side Marker Light Lens Gasket Set, 1968 Part # MB-23
Seals lens assembly to body, prevents water leakage, especially into the trunk area. Foam sponge internal seals as original. New reproductions with correct shape and material. Set of four. Learn More
$5.99 Set
Camaro Headlight Bucket, Left, 1967-1969 Part # HH-7
Best Quality Reproduction Camaro Headlight Bucket Stamped Steel Construction Black EDP Coated To Ensure Rust Prevention Fits Driver's (Left) Side Replaces GM #5957684 Camaro headlight buckets are right out front and prone to rust from weather conditions, and crash collision damage. Rick's Camaros offers only the best parts at the best possible price. If you need a head light bucket for the sealed beam on your 1967, 1968 or 1969 standard Camaro, Super Sport (SS), Rally Sport (RS) or Z28 coupe or convertible, we have it in stock and ready to ship. This headlamp capsule bucket is made from stamped steel and is EDP coated to ensure that you will not have to worry about future rust problems. This bucket will fit the driver's side of your F-Body. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968, or 1969 1st gen Camaro! NOTE: The 69 RS Camaro only uses a RH bucket on the left (driver's) side, and a LH bucket on the right (passenger's) side! Learn More
$28.99 ea.
Camaro Headlight Bucket, Right, 1967-1969 Part # HH-8
Best Quality Reproduction Camaro Headlight Bucket Stamped Steel Black EDP Coated To Ensure Rust Free Delivery Fits Passenger's Side Replaces GM #924535 Being placed right on the front of the car, your headlight buckets on your 1967, 1968, or 1969 Camaro are heavily prone to rust and collision damage. Being so susceptible to damage and being one of the first things that people see on your car, damaged headlight buckets can really take away from the overall great look of your Camaro. Rick's Camaros offers only the best parts at the best possible price, and this headlight bucket, for the passenger's side is a high quality reproduction of your original headlight part, in stamped steel and EDP (Electro Deposit Primer) coated to ensure a rust resistant finish. If you need a head light bucket for the sealed beam on your 1967, 1968 or 1969 1st gen standard Camaro, Super Sport (SS), Rally Sport (RS) or Z28 coupe or convertible, Rick's Camaros is here to give you what you need. Trust Rick's Camaros for all of your restoration and replacement needs! NOTE: The 69 RS Camaro only uses a RH bucket on the left (driver's) side, and a LH bucket on the right (passenger's) side! Learn More
$28.99 ea.
Camaro License Plate Light Lens Gasket, 1967-1972 Part # WS-49
Reproduction license lamp gasket in correct color and material. Quality made in the USA. Learn More

Was: $3.99 ea.

Now: $2.99 ea.
Camaro License Plate Light Lens, 1967-1969 Part # PL-20
Officially Licensed Reproduction Lens Attaches To License Plate Original Lettering & Correct Script Crystal Clear Acrylic Lens As Original Made In USA Clear plastic parts do one of two things over time: they can turn milky and hazy, or completely fall apart. Your 1967, 1968, or 1969 F-Body's license plate light lens can suffer from these issues, making it hard to identify your car late at night. Rick's Camaros offers this officially GM licensed crystal clear acrylic license plate light lens to replace the old original on your Camaro. This lens includes the correct embossed text and will easily apply to your Camaro's license plate. Don't wait to restore your Chevy and stay safe on the road. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968, or 1969 1st gen Camaro! Learn More

Was: $7.99 ea.

Now: $6.99 ea.
Camaro Side Marker Light Kit, With Gaskets & Mounting Nuts,1968 Part # MB-27
Superior Reproduction Fits Standard Or Rally Sport Models  20 Piece Assembly Kit Bezels Made From Die-Cast Chrome (4) Marker Bezels (2) Clear Front Marker Lenses (2) Red Rear Marker Lenses (1) Set of 4 Bezel Gaskets (1) Set of 8 Bezel Nuts The side market lights on your 1968 Camaro can become worn and damager over time, possibly getting a faded lens or getting scratched up from outside contact. Rick's Camaros wants to help you renew your F-Body's exterior and give you a great replacement option. This complete side market light kit is assembled in-house to ensure that you are getting the best quality hand-picked pieces for your Camaro's restoration. This side market light kit includes two front and two rear chrome die cast bezels, two front clear and two rear red side marker lens assemblies with text and script, and all the necessary original die cut foam seals and mounting hardware. This 20 piece kit is just what your F-Body needs. We've done restorations for years and know the best parts out there and this side marker light kit is no exception. Replace your old side marker lights today and make your Camaro's lights shine bright at night and bright new chrome pop during the day! Trust Rick's Camaros for all of your restoration and replacement needs for your 1968 1st gen Camaro! Learn More
$67.99 Kit
Camaro Headlight Bezels, For Cars With Standard Trim (Non-Rally Sport), Left & Right, 1968 Part # HB-12
Show Quality Licensed Reproduction Bright Anodized Edges as Original Bonded Matte Black Finish Pair, RH/LH The headlight bezels on your 1968 standard Camaro are out in front just like your grille. Everyone can see how the elements have not been kind to your original headlight bezels. The anodizing can haze over time and the black finish can be chipped by all sorts of things coming up off of the road. Original GM bezels were "squared off" on the leading edges unlike the later, "rounded" GM replacements and other reproductions available in the marketplace. Rick's has sourced this top-quality reproduction pair of headlight bezels with the squared edges to keep your 1968 Camaro looking its best. Learn More
$73.99 pr.
Camaro Taillight Housing To Body Gaskets, 1967-1968 Part # WS-47
Reproductions Of Original Die Cut, Heavy Density Fits RH or LH Available As Pair   The tail light housing to body gaskets on your 1967 or 1968 Camaro are used to seal the area between the tail lamp assembly and the body of your Camaro. These gaskets are needed to prevent damage to your tail lights and the space connecting the body, which can be susceptible to weather conditions. Rick’s Camaros is happy to offer new reproduction tail light housing to body baskets, as a set of two, to replace your previous gaskets. These are die cut, black foam gaskets, which will fit both the driver’s side and passenger’s side. Trust Rick’s Camaros for all of your restoration and replacement needs for your 1967 or 1968 Camaro. Learn More

Was: $8.99 pr.

Now: $7.99 pr.
Camaro Taillight Housing Mounting Nut Set, 1967-1968 Part # TL-26
Reproduction Of Original Mounting Hardware Set Of 12 Attaches Taillight Bezel To Rear Body Panel   The tail light housing to body mounting nuts on your 1967 or 1968 Camaro are used to seal the area between the tail lamp assembly and the body of your Camaro. These mountaing materials are needed to prevent damage to your tail lights and the space connecting the body, which can be susceptible to weather conditions. Rick’s Camaros is happy to offer new reproduction tail light housing to body mounting nuts, as a set of twelve, to replace your previous mounting nuts. These attach your tail light bezel to the rear body panel of your Camaro, and are simple to install. Trust Rick’s Camaros for all of your restoration and replacement needs for your 1967 or 1968 Camaro. Learn More
$13.99 Set
Camaro Taillight Housing Bezels, Left & Right, 1968 Part # TL-34
Best Quality Reproduction Tail Light Bezels Officially Licensed GM Restoration Parts  Show Quality Hard Chrome Over Diecast As Original Correct Black Accent Treatment Pre-Threaded Mounting Studs & Backing Plate Holes Mounting Nuts Included   Tail light bezels on your 1968 Camaro take several hits over the years, leaving them bruised and battered. Harsh weather conditions damage your tail light bezels while road dirt and rocks beat and sandblast the finish away. Rain and heat also ruin your tail light’s chrome and die cast, causing your Camaro to really lose its shine. Over time, your Chevrolet Camaro bezels start looking really tired, and nothing looks worse on a fresh restoration than tired and worn tail light bezels. Rick's Camaros has the solution for you! Our officially GM licensed tail light bezels are made from metal casted to proper shape with correct automotive chrome plating. With correct black accent treatment and hard chrome over die cast just like the original, you can count on your tail light bezels looking even better than the originals. These bezels come with pre-threaded mounting studs and backing plate holes as well. From race, restoration or daily drivers, Rick's Camaros is always sourcing from the world’s top manufacturers to bring you the very best 1968 Camaro tail light bezels possible.   NOTE: Do not use chemicals or pressure washing near these Camaro tail light bezels. Failure to do so will result in the manufacturer's one year warranty being null and void.   Learn More
$189.99 pr.
Camaro Back-Up Light Lens, For Cars With Standard Trim (Non-Rally Sport), 1968 Part # PL-11
Accurate Reproduction Officially Licensed GM Restoration Part High Quality White Lens Sold Individually Correct Scripts & Text A Must Have For Any 1968 Non RS Camaro With Standard Trim These quality reproduction 1968 Camaro taillight lenses are a must for any F-Body non Rally Sport Camaro. Over time, your old lenses will become washed out and make your Chevy Camaro an easy target for a rear end collision (the tail lights are already mounted low enough as it is!). The rear bulb housings are made of plastic and become extremely prone to cracking and flaking as they get more worn down. Rick's Camaros offers these accurate reproduction white taillight lenses, made of high quality materials with correct scripts and text, and in correct colors. Replace your old 1968 1st gen Chevrolet Camaro tail lights today with this quality reproduction from Rick's Camaros and make your Camaro stand out at night. Learn More

Was: $15.99 ea.

Now: $13.99 ea.
Camaro Parking Light Assembly, For Cars With Standard Trim (Non-Rally Sport), 1968 Part # PK-7
Officially Licensed GM Restoration Part Complete Park Lamp Assembly Fully Assembled Includes Housing, Lens With Trim, Chrome Head Screws, Correct Gasket, Bulb, Bulb Socket, & Ground Wire With Terminal End Fits Driver's Or Passenger's Sides For Cars With Standard Trim Ricks Camaros is proud to bring you the best, high quality reproduction park light lens assembly for your 1968 Camaro you can buy. Over time, your Camaro park lenses can turn a gold-brown color that really affects the brightness of your lighting. Sometimes your original F-Body Camaro front park lamps simply crumble leaving you with an unsightly exposed bulb and leaving your housing open to rust or electrical issues. Rick's Camaros offers this officially GM licensed park light assembly for your F-Body with standard trim. Each 1968 Camaro park light assembly is fully assembled and includes the housing, lens with trim, chrome head screws, correct gasket, bulb, bulb socket, and ground wire with correct terminal end. This assembly will fit either the driver's or passenger's side of your non-Rally Sport Camaro. From daily driver, show to hot rod, buy the best for your 1968 Camaro with park lamp assembly from Rick's Camaros. Rest assured your restoration will be done right! Learn More
$43.99 ea.
Camaro Taillight Lens, For Cars With Standard Trim (Non-Rally Sport), 1968 Part # PL-10
Accurate Reproduction Officially Licensed GM Restoration Part High Quality Red Lens Sold Individually Correct Scripts & Text A Must Have For Any 1968 Non RS Camaro With Standard Trim These quality reproduction 1968 Camaro taillight lenses are a must for any F-Body non Rally Sport Camaro. Over time, your old lenses will become washed out and make your Chevy Camaro an easy target for a rear end collision (the tail lights are already mounted low enough as it is!). The rear bulb housings are made of plastic and become extremely prone to cracking and flaking as they get more worn down. Rick's Camaros offers these accurate reproduction red taillight lenses, made of high quality materials with correct scripts and text, and in correct colors. Replace your old 1968 1st gen Chevrolet Camaro tail lights today with this quality reproduction from Rick's Camaros and make your Camaro stand out at night. Learn More

Was: $17.99 ea.

Now: $13.99 ea.
Camaro Parking Light Lens, For Cars With Standard Trim (Non-Rally Sport), 1968 Part # PL-2
Officially Licensed GM Restoration Part Reproduction of Original Crystal Clear Round Lens With Stainless Trim Attached Correct "Guide" Lettering and Script Fits Cars With Standard Trim Only Sold Individually Made In USA Rick's Camaros is proud to bring you superior quality reproduction park light lens for your 1968 Camaro you can buy. Over time, your Camaro park lenses can turn a gold-brown color that really affects the brightness of your lighting. Sometimes your original F-Body park lenses simply crumble leaving you with an unsightly exposed bulb and leaving your housing open to rust or electrical issues. Rick's Camaros offers this officially GM licensed superior reproduction parking light lens for your F-Body with standard trim. This crystal clear faceted lens with stainless trim attached has the correct guide lettering and script, and is sold individually. From daily driver, show to hot rod, buy the best for your 1968 Camaro with park lamp lenses from Rick's Camaros. Rest assured your restoration will be done right! Learn More

Was: $18.99 ea.

Now: $17.99 ea.
Camaro Taillight Housing Backing Plates, 1967-1968 Part # TL-28
Quality Reproduction Tail Light Housing Gaskets Stamped Steel With Correct Text Stampings Plated To Match Original Appearance Sold As A Pair The old taillight housing backing plates on your 1967 or 1968 Camaro can become worn and rusted over time from harsh weather conditions. These backing plates are what actually bolt to the taillight bezels themselves, and if they go bad, it can negatively affect the rest of your tail light assembly. Rick's Camaros wants to ensure your F-Body's rear section is protected, by offering these accurate reproduction taillight housing to body gaskets. These gaskets are the best defense against the elements because they were actually designed to fit the bezel and tail pan to seal like the originals. These are made from heavy density molded rubber, with a far superior sealing and appearance to the cheap foam gaskets. Don't wait to replace your tail light housing gaskets, and feel confident while on the road. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967 or 1968 1st gen Camaro! Learn More
$78.99 pr.
Camaro LED Taillight Conversion Kit, 1967-1968 Part # PL-40
20 High Intensity LEDs Per Side Stainless Steel Mounting Brackets Fits Stock Housing & Lens For Rally Sport & Standard Taillight, Stoplight & Turn Signal Lights 2 Kits Required For Rally Sport Cars Detailed Installation Instructions Included Learn More
$93.99 Kit
Items: 1 to 28 of 53 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. 3
  4. Next
Grid  |  List
3