Product Experts Available 1-800-359-7717

Filter Your Results

 

1968 CAMARO Z28 CHEVY HOOD

Search Term: 'All Parts'
Category: 'Hood'
Vehicle: '1968 CHEVY CAMARO Z28'

25 Item(s) Sort by: Show: per page Grid  |  List
Best Sellers
Camaro Hood Hinge Spring, For Cowl Induction Or Super Sport Hoods, 1967-1969 Part # HD-55
Reproduction of Original Correct for Super Sport & Cowl Induction Hood (Functions Perfectly with All Steel Hoods) 28 Coils 9 3/8" Long End to End Spring Steel Plated Dull Black Finish Sold Each Two Required Per Car The original hood hinge springs on your 1967, 1968, 1969 Camaro can become rusted and worn, preventing your hood to open and close properly. Old, original springs will lose tension over time, causing the hood to drop slightly when it is open. Rick's Camaros is happy to offer this high quality reproduction hood hinge, which will perfectly replace the original on your steel hood. Plated dull black, this hinge spring is 9-3/8 inches in length with 28 correct coils for specific spring rate on heavier SS hoods. Don't wait to replace your hood hinge springs, and get your hood operating cleanly and effectively. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968 or 1969 1st gen Camaro! WARNING: Hood springs in general are not recommended for use on fiberglass hoods as the extra tension can cause stress cracks in the fiberglass reinforcement resulting in hood failure. Learn More

Was: $17.99 ea.

Now: $14.99 ea.
Camaro Hood Adjustment Bolt & Nut Set, 1967-1972 Part # HD-18P
Best Quality Reproduction Hood Bolts And Nuts Includes Correct Slotted Bolts & Flanged Stop Nuts Attaches To Core Support Set Of 4 Pieces Replaces GM #3996899 (Screw) & 1359887 (Nut) Rick's Camaros is happy to offer this set of hood adjustment bolts and nuts for your 1967, 1968, 1969, 1970, 1971, or 1972 Camaro's hood. This kit attaches to the core support and barely touches the bottom of your Camaro hood to keep it in place. As your Camaro rolls down the road, the hood is constanly moving side to side and front to back on the hood hinges. When topped with the rubber hood bumpers, this kit keeps the hood from moving around too much and scraching your Camaro's paint and it keeps the hood from going down too far when it is shut. This set or four includes correct slotted head screws and flanged stop nuts. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968, 1969, 1970, 1971, or 1972 1st or 2nd gen Camaro! Learn More

Was: $8.99 pr.

Now: $7.99 pr.
Camaro Hood Hinge, Left, Reproduction, Good Quality, 1967-1969 Part # HD-50
Replacement Hood Hinge   This Camaro replacement hood hinge has been manufactured to meet or exceed factory specifications and performance. You will find the fit and function will work perfectly for your Camaro. You will also be pleased to know that Rick's has sourced this hood hinge among other possible parts as the best choice for your repair or restoration project. Learn More
$44.99 ea.
Camaro Hood Hinge, Right, Reproduction, Good Quality, 1967-1969 Part # HD-51
 Replacement Hood Hinge   This Camaro replacement hood hinge has been manufactured to meet or exceed factory specifications and performance. You will find the fit and function will work perfectly for your Camaro. You will also be pleased to know that Rick's has sourced this hood hinge among other possible parts as the best choice for your repair or restoration project. Learn More
$44.99 ea.
Camaro Hood Latch Assembly, 1967-1981 Part # HD-26
Good Quality Reproduction New Proprietary Tooling Black EDP Coated To Ensure Rust Prevention Includes Upper Lock Pate, Pilot Bolt, Pop-Up Spring Retainer Pre-Assembled For Easy Installation Rick's Camaros offers this accurate reproduction of the upper hood safety latch which bolts to the bottom of the Camaro hood. When the hood closes, the pilot bolt is caught by the hood opening mechanism and the hook on the mechanism catches the safety latch just in case the hood opening mechanism fails on your Camaro. Replace that ugly, rusted original with this EDP coated reproduction hood latch from Rick's today. This hood latch assembly comes from new proprietary tooling from 2009, includes the lock plate, pilot bolt, spring, retainer, and jamb nut, and comes properly preassembled for an easy installation. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, or 1981 1st or 2nd gen Camaro! WARNING: There are two nuts which hold the pilot bolt to the lock plate. Please make sure there is one nut on one side of the lock plate and one nut on the other side. This jams the pilot bolt, keeps it from backing out and reinforces the plate. Failure to check this may result in part failure at highway speed which could cause the hood to fly up.  Learn More

Was: $31.99 Kit

Now: $29.99 Kit
Camaro Hood Hinge Mounting Bolt Set, 1967-1969 Part # HD-25B
Reproduction Black Oxide Indented Hex Head Bolts Special Thick Captured Washer 8 Bolts Per Set   Learn More
$7.99 Set
Camaro Hood Hinge, Left, OE Style, Show Correct, 1967-1969 Part # HD-81
Show Correct Reproduction Of Original OE Style Original Gauge Material Quality Heavy Construction Gray Phosphate Plated Hardened Pivot Points Fits Driver's Side Rick's Camaros is proud to bring you show quality hood hinges to take out of the box and bolt right on your 1967, 1968, or 1969 Camaro! Why worry with the dangerous job of installing the springs yourself when you can buy these now and be ahead of the game? Replace your old hinges with this OE quality, reproduction hood hinge, made of original gauge material and accurately stamped from high strength steel. This hood hinge was constructed with hardened pivot points and correct dark gray phosphate plating, and will fit your F-Body's driver's side. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968, or 1969 1st gen Chevrolet Camaro! Learn More
$109.99 ea.
Camaro Hood Hinge, Right, OE Style, Show Correct, 1967-1969 Part # HD-80
Show Correct Reproduction Of Original OE Style Original Gauge Material Quality Heavy Construction Gray Phosphate Plated Hardened Pivot Points Fits Passenger's Side Rick's Camaros is proud to bring you show quality hood hinges to take out of the box and bolt right on your 1967, 1968, or 1969 Camaro! Why worry with the dangerous job of installing the springs yourself when you can buy these now and be ahead of the game? Replace your old hinges with this OE quality, reproduction hood hinge, made of original gauge material and accurately stamped from high strength steel. This hood hinge was constructed with hardened pivot points and correct dark gray phosphate plating, and will fit your F-Body's passenger's side. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968, or 1969 1st gen Chevrolet Camaro! Learn More
$109.99 ea.
Camaro Hood Hinge Spring, For Flat Hood, 1967-1969 Part # 33-10871
Best Quality Reproduction Hood Hinge Spring For Cars With Flat Hood 26 Coils 8-5/8" Long Correct .200" Diameter Wire Black EDP Coated Nice reproduction of the original Camaro flat hood spring. Old, original hood springs will lose tension over the years and cause the hood on your standard Camaro, Rally Sport or Z/28 to drop slightly when it is open. Replace your original hood springs with this quality reproduction from Rick's First Generation and know you are getting the best parts at the best possible price. Fits: 1967, 1968 and 1969 NOTE: Hood springs in general are not recommended for use on fiberglass hoods as the extra tension can cause stress cracks in the fiberglass reinforcement resulting in hood failure. Learn More
$13.99 ea.
Camaro Hood Latch Spring, 1967-1981 Part # HD-8
Reproduction Hood Lock Spring Stainless Steel Finish Replaces GM #3857882 In order to make your hood latch release assembly work properly in your 1967-1981 Camaro, you'll need a new hood safety latch spring. Coming in a stainless steel finish, this spring will work great in your hood latch assembly. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, or 1981 1st or 2nd gen Camaro! Learn More

Was: $8.99 ea.

Now: $5.99 ea.
Camaro Billet Aluminum Hood Hinges, Polished Finish, 1967-1969 Part # 754077
High Quality Custom Polished Finish Hinges Manufactured Using 6061-T6 Aluminum Sealed Bearings For Maximum Smoothness And Longevity Integral Stainless Steel Gas Struts Stainless Steel Mounting Hardware Included Learn More
$569.99 pr.
Camaro Hood Latch Pilot Bolt, 1967-1981 Part # HD-6
Good Quality Reproduction Black EDP Coated Holds Spring In Place On Upper Hood Safety Latch Assembly   NOTE: Bolt is included on all new upper hood safety latch assemblies. Learn More

Was: $12.99 ea.

Now: $10.99 ea.
Camaro Billet Aluminum Hood Hinges, Natural Finish, Air Frame, For Cars With Steel Hood, 1967-1969 Part # DS-55
Direct Replacement Fitment Installation Hardware & Instructions Included Machined, Natural Finish Specific Assist Cylinders For Cars With Steel Hood These billet hood hinges are great upgrade for any vehicle. The hinges are a direct bolt on replacement for worn out stock hinges. These hinges look great, are very strong, and are made in the USA. No extra hood prop required. Learn More
$599.99 pr.
Camaro Billet Aluminum Hood Hinges, Machined Finish, 1967-1969 Part # 754029
High Quality Custom Machined Finish Hinges Manufactured Using 6061-T6 Aluminum Sealed Bearings For Maximum Smoothness And Longevity Integral Stainless Steel Gas Struts Stainless Steel Mounting Hardware Included Learn More
$494.99 pr.
Camaro Hood Hinges, Billet Aluminum, Solid Frame, Natural, With Steel Hood, 1967-1969 Part # 790472
An Absolutely Spectacular Custom Part For Your Camaro! Machined From 6061-T6 Finely Detailed - Like A Work Of Art Bolts To Stock Locations Includes Integral Gas Struts So No Springs Needed To Be Used With A Steel Hood Learn More
$639.99 pr.
Camaro Billet Aluminum Hood Hinges, Clear Powder Coated Finish, 1967-1969 Part # 754078
High Quality Custom Hinges Shiny Clear Powder Coated Finish Means No Need To Ever Polish Manufactured Using 6061-T6 Aluminum Sealed Bearings For Maximum Smoothness And Longevity Integral Stainless Steel Gas Struts Stainless Steel Mounting Hardware Included Learn More
$624.99 pr.
Camaro Billet Aluminum Hood Hinges, Black Powder Coated Finish, 1967-1969 Part # 754078-B
High Quality Custom Hinges Maintenance Free Black Powder Coated Finish Manufactured Using 6061-T6 Aluminum Sealed Bearings For Maximum Smoothness And Longevity Integral Stainless Steel Gas Struts Stainless Steel Mounting Hardware Included Learn More
$624.99 pr.
Camaro Billet Hood Hinges, Natural Finish, Air Frame, For Cars With Fiberglass Hood, 1967-1969 Part # DS-56
Direct Replacement Fitment Machined, Natural Finish Specific Assist Cylinders For Cars With Fiberglass Hood Installation Hardware & Instructions Included The billet hood hinges are great upgrade for any vehicle. The hinges are a direct bolt on replacement for worn out stock hinges. These hinges look great, are very strong, and are made in the USA. No extra hood prop required.   Learn More
$729.99 pr.
Camaro Billet Aluminum Hood Hinges, Air Frame, Black Anodized, 1967-1969 Part # DS-71
Replacement Hinges Billet Aluminum Black Anodized Finish For Cars With Steel Hood These Camaro replacement hood hinges have been manufactured to meet or exceed factory specifications and performance. You will find the fit, finish and function will work perfectly for your Camaro. You will also be pleased to know that Rick's has sourced these hood hings among other possible parts as the best choice for your repair or restoration project. Learn More
$799.99 pr.
Camaro Hood Hinges, Billet Aluminum, Solid Frame, Black Anodized, With Steel Hood, 1967-1969 Part # 790474
An Absolutely Spectacular Custom Part For Your Camaro! Machined From 6061-T6 Finely Detailed - Like A Work Of Art Bolts To Stock Locations Includes Integral Gas Struts So No Springs Needed To Be Used With A Steel Hood Learn More
$749.99 pr.
Camaro Hood Hinges, Billet Aluminum, Solid Frame, Black Anodized, For Fiberglass Hood, 1967-1969 Part # 790473
An Absolutely Spectacular Custom Part For Your Camaro! Machined From 6061-T6 Finely Detailed - Like A Work Of Art Bolts To Stock Locations Includes Integral Gas Struts So No Springs Needed To Be Used With A Fiberglass Hood Learn More
$749.99 pr.
Camaro Hood Hinges, Billet Aluminum, Solid Frame, Natural, With Fiberglass Hood, 1967-1969 Part # 790471
An Absolutely Spectacular Custom Part For Your Camaro! Machined From 6061-T6 Finely Detailed - Like A Work Of Art Bolts To Stock Locations Includes Integral Gas Struts So No Springs Needed To Be Used With A Fiberglass Hood Learn More
$639.99 pr.
Camaro Hood Hinge, Left, GM, 1967-1969 Part # HD-3L
Original GM Part Gray Phosphate Coated Fits Driver's Side Original GM hood hinge for your Camaro is much better than those super-inexpensive reproduction hood hinges that do not have hardened pivot points. Those hinges have been known to warp over a short period of time. Buy the best parts for your restoration from Rick's today. Learn More
$192.99 ea.
Camaro Billet Aluminum Hood Hinges, Air Frame, Black Anodized, 1967-1969 Part # DS-72
Replacement Hinges Billet Aluminum Black Anodized Finish For Cars With Fiberglass Hood These Camaro replacement hood hinges have been manufactured to meet or exceed factory specifications and performance. You will find the fit, finish and function will work perfectly for your Camaro. You will also be pleased to know that Rick's has sourced these hood hings among other possible parts as the best choice for your repair or restoration project. Learn More
$799.99 pr.
25 Item(s) Sort by: Show: per page Grid  |  List
4