Product Experts Available 1-800-359-7717

Filter Your Results

  1. Remove This Item CATEGORY: Engine Mounts
 

1969 CAMARO RS ENGINE MOUNTS

Search Term: 'All Parts'
Category: 'Engine Mounts'
Vehicle: '1969 CHEVY CAMARO RS'
22 Item(s) Sort by: Show: per page Grid  |  List
Camaro Motor Mount Thru Bolt Set, Small Block & Big Block, Except 307 & 327ci, 1967-1972 Part # RC-332
Correct Point Marsden Lock Nuts 4 7/16" in Length For Use With Wide Motor Mount P/N EP-89 or P/N EP-90 Fits 1967-1968 302, 350, 396, 427 Fits 1969-1971 302, 350, 396 Case-hardened motor mount bolt set. Replace the old, fatigued thru bolts on your Camaro with this new set.   Learn More
$12.99 Set
Camaro Transmission Mount, Polyurethane, Fits All Transmissions, 1967-2002 Part # UR-3
Replacement Transmission Mount Comes In Black Or Red Fits All Transmissions Polyurethane Far Outlasts Stock Rubber Mounts Decreases Driveline Deflection Superior In Strength To Rubber Zinc Plated Mounting Bracket Included Includes All Bushings & Hardware Sold Individually (2 Required Per Car) Made In The USA Fits 1967-2002 Camaro Models The motor and transmission mounts in your 1967-2002 Camaro will need to be replaced after approximately every 50,000 miles, or if they become soaked from fluids like oil several times. From excessive use and abuse, the motor mounts get weak and will not secure your engine properly. The rear transmission mount holds the transmission to the Camaro crossmember and provides the proper driveline angle between the transmission and the rearend differential. Original rubber mounts can flex causing premature wear on the transmission and rearend if you use your Camaro for occasional, “spirited” driving. The motor and transmission mounts on your Chevy Camaro are crucial for reducing vibration and extending the life of your engine and its components. If your mounts break or grow weak, it can be dangerous since this can allow the engine to shift, possibly sticking the accelerator in a full throttle position or causing the engine to push the fan into the radiator or fan shroud. Rick's Camaros is happy to offer this new polyurethane transmission mount for your F-Body’s engine. Fitting either the driver’s or passenger’s side, this steel mount is sold individually, has polyurethane bushings, and includes a zinc plated mounting bracket for easy installation. This will help to reduce any wheel hop or traction loss, provide maximum transmission support, and reduce driveline deflection. Don’t wait to stay safe and comfortable in your Chevrolet. From racers, show cars, hot rods, and daily drivers, you can trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993 ,1994 ,1995, 1996, 1997, 1998, 1999, 2000, 2001, or 2002 Camaro! Learn More
$34.99 ea.
Camaro Motor Mount, 307 & 327ci, 1967-1969 Part # EP-88
Rubber Mount For 307 & 327 Engines Sold Individually (Two Required) For Automatic Or Manual Transmission Complete Mounting Bracket Included Fits 1st Gen Camaros The motor mounts in your 1967, 1968, or 1969 first generation Camaro will need to be replaced after approximately every 50,000 miles, or if they become soaked from fluids like oil several times. From excessive use and abuse, the mounts get weak and will not secure your engine properly. Also, when accelerating or decelerating, if you feel or hear a loud noise from under your car, you should check for signs of fan to shroud contact on your radiator core or fan shroud. If you indeed have this fan impact, you can be sure that your motor mount is broken. The motor mounts on your Chevy Camaro are crucial for reducing vibration and extending the life of your engine and its components. If your mounts break or grow weak, it can be dangerous since this can allow the engine to shift, possibly sticking the accelerator in a full throttle position. Rick’s Camaros is happy to offer this new front rubber motor mount for your F-Body’s engine. Fitting either the driver’s or passenger’s side, this mount is sold individually and includes the mounting bracket for easy installation. This will help to reduce any wheel hop or traction loss. Don’t wait to stay safe and comfortable in your Chevrolet. From racers, show cars, hot rods, and daily drivers, you can trust Rick’s Camaros for all of your restoration and replacement needs for your 1967, 1968, or 1969 1st gen Camaro! Learn More
$14.99 ea.
Camaro Motor Mount, 302, 350 & 396ci, 1969-1972 Part # EP-90
Good Quality Reproduction Vulcanized Rubber Over Steel Cores As Original Fits 302, 350 & 396 Engines With ORIGINAL Frame Mounts (Or Our Part # EP-128 Reproduction Mounts ONLY) Hardened Steel Fasteners With Heat Treated Grade-5 Bolts Complete Mounting Bracket Included Sold Individually (Two Required Per Car) The motor mounts in your 1969, 1970, 1971, or 1972 Camaro will need to be replaced after approximately every 50,000 miles, or if they become soaked from fluids like oil several times. From excessive use and abuse, the mounts get weak and will not secure your engine properly. The rubber in the original mounts can degrade and cause splits, eventually leading to failure. Also, when accelerating or decelerating, if you feel or hear a loud noise from under your car, you should check for signs of fan to shroud contact on your radiator core or fan shroud. If you indeed have this fan impact, you can be sure that your motor mount is broken. The motor mounts on your Chevy Camaro are crucial for reducing vibration and extending the life of your engine and its components. If your mounts break or grow weak, it can be dangerous since this can allow the engine to shift, possibly sticking the accelerator in a full throttle position or causing the engine to push the fan into the radiator or fan shroud. Rick’s Camaros is happy to offer this new front rubber motor mount for your F-Body’s engine. Fitting either the driver’s or passenger’s side, this mount is sold individually and includes the mounting bracket for easy installation. This will help to reduce any wheel hop or traction loss. This “safety” mount has a reinforced tab on the end that will catch the motor mount in the case that the rubber fails. Don’t wait to stay safe and comfortable in your Chevrolet. From racers, show cars, hot rods, and daily drivers, you can trust Rick’s Camaros for all of your restoration and replacement needs for your 1969, 1970, 1971, or 1972 Camaro! NOTE: When using EP-4R & EP-4L reproduction frame mounts please use our EP-88 motor mounts. Learn More
$23.99 ea.
$10.99 ea.
Camaro Motor Mount Thru Bolt Set, 307 & 327ci, 1967-1969 Part # RC-323
Close to Original Appearance Marsden Lock Nuts 3 7/16" in Length For Use With Narrow Motor Mount P/N EP-88 Fits 1967-1969 307 And 327 Case-hardened motor mount bolt set. Replace the old, fatigued thru bolts on your Camaro with this new set. Learn More
$12.99 Set
Camaro Engine Frame Mounts, Big Block, Replacement Style, 396ci, 1969 Part # EP-200
Reproduction Of Original Correct OE Stamped Steel & Thickness Fits 396 Big Block Engines Comes As A Pair EDP Coated To Ensure Rust Prevention For 1st Gen Camaro Models Works With EP-90 Engine Mount For Best Fit   The engine mounting brackets on your 1969 Camaro are made to secure your engine motor mounts, which are meant to keep your engine in place and away from the radiator core or fan shroud. All parts are essential in your F-Body, but your mount bracket can rust over time from fluid exposure or from the constant barrage of outside elements. Eventually your brackets may lose their hold and fall off or break, leaving your motor mount and other engine components vulnerable. Rick’s Camaros is happy to offer these new OEM replacement engine frame mount brackets, made from high quality materials and correct stamped steel with OE thickness. These metal brackets attach to the crossmember of your Chevy Camaro, and are sold individually. Don’t wait to keep your engine components secure, and get a new pair of engine motor mount brackets today. From racers, show cars, hot rods, and daily drivers, you can trust Rick’s Camaros for all of your restoration and replacement needs for your 1969 Camaro!  Learn More
$34.99 pr.
Camaro Engine Motor Mounts, 302, 350 & 396ci, 1969 Part # EP-175
OEM Reproduction Engine Motor Mounts Made In The USA Fits 302, 350, & 396 Engines Comes As A Pair Fits 1969 1st Gen Camaro Models Will Work With Mounts EP-7 & EP-128   The engine motor mounts in your 1969 first generation Camaro will need to be replaced after approximately every 50,000 miles, or if they become soaked from fluids like oil several times. From excessive use and abuse, the mounts get weak and will not secure your engine properly. The rubber from the original mounts can degrade and split, eventually leading to failure. Also, when accelerating or decelerating, if you feel or hear a loud noise from under your car, you should check for signs of fan to shroud contact on your radiator core or fan shroud. If you indeed have this fan impact, you can be sure that your motor mount is broken. The motor mounts on your Chevy Camaro are crucial for reducing vibration and extending the life of your engine and its components. If your mounts break or grow weak, it can be dangerous since this can allow the engine to shift, possibly sticking the accelerator in a full throttle position or causing the engine to push the fan into the radiator or fan shroud. Rick’s Camaros is happy to offer this new set of engine motor mounts for your F-Body’s engine. This pair of motor mounts will fit both the driver’s and passenger’s side, and includes a mounting bracket for easy installation. This will help to reduce any wheel hop or traction loss, and is guaranteed to be much stronger than your rubber originals. Don’t wait to stay safe and comfortable in your Chevrolet. From racers, show cars, hot rods, and daily drivers, you can trust Rick’s Camaros for all of your restoration and replacement needs for your 1969 1st gen Camaro! Learn More
$61.99 pr.
Camaro Engine Frame Mounts, Big Block 396 & 427ci, Show Correct, 1969 Part # EP-7
Licensed GM Reproduction Black EDP Coating Fits 396 & 427 Big Block Engines Driver's Side Height Of Mount = 2½" Passenger's Side Height Of Mount = 2" Width Of Both Mounts At The Motor Mount = 2¼" Corresponding Motor Mount Available As Our Part # EP-90 Or EP-175   The engine mounting brackets on your 1969 Camaro are made to secure your engine motor mounts, which are meant to keep your engine in place and away from the radiator core or fan shroud. All parts are essential in your F-Body, but your mount bracket can rust over time from fluid exposure or from the constant barrage of outside elements. Eventually your brackets may lose their hold and fall off or break, leaving your motor mount and other engine components vulnerable. Rick’s Camaros is happy to offer these new OEM replacement engine frame mount brackets, made from high quality materials and correct stamped steel with OE thickness. These metal brackets attach to the crossmember of your Chevy Camaro, and are sold individually. Don’t wait to keep your engine components secure, and get a new pair of engine motor mount brackets today. From racers, show cars, hot rods, and daily drivers, you can trust Rick’s Camaros for all of your restoration and replacement needs for your 1969 Camaro!  NOTE: Small block mounts will not work to mount the big block engine. Using small block mounts will result in the big block being too close to the steering box, off square and the cooling fan being out of place enough so a fan shroud will not fit. Learn More
$65.99 pr.
Camaro Motor Mount Set, Small Or Big Block, 1967-1968, 307 & 327ci, Black, Polyurethane, Prothane, 1969 Part # UR-2001
Reduce Engine Travel Far Superior In Strength To Rubber Components Black Urethane Won't Deteroriate Like Rubber Ideal For Higher HP Engines Includes Zinc Plated Mounting Bracket Fits 1967-68 Small Block & Big Block Engines Fits 1969 307 & 327 Engines For Use With Engine Mounts, Part # EP-4 Or EP-6   The motor mounts in your 1967, 1968, or 1969 first generation Camaro will need to be replaced after approximately every 50,000 miles, or if they become soaked from fluids like oil several times. From excessive use and abuse, the mounts get weak and will not secure your engine properly. The rubber from the original mounts can degrade and split, eventually leading to failure. Also, when accelerating or decelerating, if you feel or hear a loud noise from under your car, you should check for signs of fan to shroud contact on your radiator core or fan shroud. If you indeed have this fan impact, you can be sure that your motor mount is broken. The motor mounts on your Chevy Camaro are crucial for reducing vibration and extending the life of your engine and its components. If your mounts break or grow weak, it can be dangerous since this can allow the engine to shift, possibly sticking the accelerator in a full throttle position or causing the engine to push the fan into the radiator or fan shroud. Rick’s Camaros is happy to offer this new set of polyurethane motor mounts for your F-Body’s small or big block engine. This pair of urethane block motor mounts will fit both the driver’s and passenger’s side, has polyurethane bushing material, and includes a zinc plated mounting bracket for easy installation. This will help to reduce any wheel hop or traction loss, and is guaranteed to be much stronger than your rubber originals. Don’t wait to stay safe and comfortable in your Chevrolet. From racers, show cars, hot rods, and daily drivers, you can trust Rick’s Camaros for all of your restoration and replacement needs for your 1967, 1968, or 1969 1st gen Camaro! Learn More
$79.99 ea.
Camaro Motor Mount, Polyurethane, Chrome, Hyper-Flex, 1967-1971 Part # UR-22
Combines Great Vibration Isolation With Indestructibility Ideal For Higher HP Engines Replaces Deteriorated Rubber Mounts "Short & Wide" Type Polyurethane Material, Chrome Finish Sold Individually (Two Required Per Car) Safety Interlock Feature Fits 1967-1971 Camaro Models   The motor mounts in your 1967, 1968, 1969, 1970, or 1971 Camaro will need to be replaced after approximately every 50,000 miles, or if they become soaked from fluids like oil several times. From excessive use and abuse, the mounts get weak and will not secure your engine properly. The rubber in the original mounts can degrade and cause splits, eventually leading to failure. Also, when accelerating or decelerating, if you feel or hear a loud noise from under your car, you should check for signs of fan to shroud contact on your radiator core or fan shroud. If you indeed have this fan impact, you can be sure that your motor mount is broken. The motor mounts on your Chevy Camaro are crucial for reducing vibration and extending the life of your engine and its components. If your mounts break or grow weak, it can be dangerous since this can allow the engine to shift, possibly sticking the accelerator in a full throttle position or causing the engine to push the fan into the radiator or fan shroud. Rick’s Camaros is happy to offer this new front polyurethane motor mount for your F-Body’s engine. Fitting either the driver’s or passenger’s side, this mount is sold individually and includes the upper and lower steel brackets that wrap around each other, encapsulated by the molded polyurethane material. This will help to reduce any wheel hop or traction loss. This urethane mount has a beautiful chrome finish and also includes a safety interlock feature to ensure that the safety mounts will never pull apart under stress. Don’t wait to stay safe and comfortable in your Chevrolet. From racers, show cars, hot rods, and daily drivers, you can trust Rick’s Camaros for all of your restoration and replacement needs for your 1967, 1968, 1969, 1970 ,or 1971 Camaro! Learn More
$64.99 ea.
Camaro Motor Mount Set, 302, 350 & 396ci, Black, Polyurethane, Prothane, 1969 Part # UR-2101
Reduce Engine Travel Far Superior In Strength To Rubber Components Black Urethane Won't Deteroriate Like Rubber Ideal For Higher HP Engines Mounts Have Safety Interlock Feature Includes Zinc Plated Mounting Bracket Fits 302, 350, & 396 Engines Fits 1969 1st Gen Camaros   The motor mounts in your 1969 first generation Camaro will need to be replaced after approximately every 50,000 miles, or if they become soaked from fluids like oil several times. From excessive use and abuse, the mounts get weak and will not secure your engine properly. The rubber from the original mounts can degrade and split, eventually leading to failure. Also, when accelerating or decelerating, if you feel or hear a loud noise from under your car, you should check for signs of fan to shroud contact on your radiator core or fan shroud. If you indeed have this fan impact, you can be sure that your motor mount is broken. The motor mounts on your Chevy Camaro are crucial for reducing vibration and extending the life of your engine and its components. If your mounts break or grow weak, it can be dangerous since this can allow the engine to shift, possibly sticking the accelerator in a full throttle position or causing the engine to push the fan into the radiator or fan shroud. Rick’s Camaros is happy to offer this new set of polyurethane motor mounts for your F-Body’s small or big block engine. This pair of urethane block motor mounts will fit both the driver’s and passenger’s side, has polyurethane bushing material, and includes a zinc plated mounting bracket for easy installation. This will help to reduce any wheel hop or traction loss, and is guaranteed to be much stronger than your rubber originals. Don’t wait to stay safe and comfortable in your Chevrolet. From racers, show cars, hot rods, and daily drivers, you can trust Rick’s Camaros for all of your restoration and replacement needs for your 1969 1st gen Camaro! Learn More
$82.99 pr.
Camaro Engine Conversion Bracket Kit, LS1, 1967-1971 Part # 718685
For Use When Converting To A Late Model LS Series Or VORTEC Engine For 1972-92, The Rubber Mounts (Included With Kit) Will Not Be Used   Learn More
$99.99 Kit
Camaro Motor Mount Set, 302, 350 & 396ci, Solid Steel, Moroso, 1969 Part # EP-149
Reduce Excessive Engine Movement Eliminates Torque Loss & Binding Linkage No Need For Torque Straps Or Chains Gold Zinc Plating Includes Mounting Bracket Fits 302, 350 & 396 Small Block Engines Fits 1969 1st Gen Camaros   The motor mounts in your 1969 first generation Camaro will need to be replaced after approximately every 50,000 miles, or if they become soaked from fluids like oil several times. From excessive use and abuse, the mounts get weak and will not secure your engine properly. The rubber from the original mounts can degrade and split, eventually leading to failure. Also, when accelerating or decelerating, if you feel or hear a loud noise from under your car, you should check for signs of fan to shroud contact on your radiator core or fan shroud. If you indeed have this fan impact, you can be sure that your motor mount is broken. The motor mounts on your Chevy Camaro are crucial for reducing vibration and extending the life of your engine and its components. If your mounts break or grow weak, it can be dangerous since this can allow the engine to shift, possibly sticking the accelerator in a full throttle position or causing the engine to push the fan into the radiator or fan shroud. Rick’s Camaros is happy to offer this new set of solid steel motor mounts for your F-Body’s engine. This pair of steel block motor mounts will fit both the driver’s and passenger’s side, has steel bushing material, and includes a zinc plated mounting bracket for easy installation. This will help to reduce any wheel hop or traction loss. Don’t wait to stay safe and comfortable in your Chevrolet. From racers, show cars, hot rods, and daily drivers, you can trust Rick’s Camaros for all of your restoration and replacement needs for your 1969 1st gen Camaro! Learn More
$39.99 pr.
Camaro Motor Mount Set, 302, 350 & 396ci, Red, Polyurethane, Prothane, 1969 Part # UR-2102
Reduce Engine Travel Far Superior In Strength To Rubber Components Red Urethane Won't Deteroriate Like Rubber Ideal For Higher HP Engines Mounts Have Safety Interlock Feature Includes Zinc Plated Mounting Bracket Fits 302, 350, & 396 Engines Fits 1969 1st Gen Camaros   The motor mounts in your 1969 first generation Camaro will need to be replaced after approximately every 50,000 miles, or if they become soaked from fluids like oil several times. From excessive use and abuse, the mounts get weak and will not secure your engine properly. The rubber from the original mounts can degrade and split, eventually leading to failure. Also, when accelerating or decelerating, if you feel or hear a loud noise from under your car, you should check for signs of fan to shroud contact on your radiator core or fan shroud. If you indeed have this fan impact, you can be sure that your motor mount is broken. The motor mounts on your Chevy Camaro are crucial for reducing vibration and extending the life of your engine and its components. If your mounts break or grow weak, it can be dangerous since this can allow the engine to shift, possibly sticking the accelerator in a full throttle position or causing the engine to push the fan into the radiator or fan shroud. Rick’s Camaros is happy to offer this new set of polyurethane motor mounts for your F-Body’s small or big block engine. This pair of urethane block motor mounts will fit both the driver’s and passenger’s side, has polyurethane bushing material, and includes a zinc plated mounting bracket for easy installation. This will help to reduce any wheel hop or traction loss, and is guaranteed to be much stronger than your rubber originals. Don’t wait to stay safe and comfortable in your Chevrolet. From racers, show cars, hot rods, and daily drivers, you can trust Rick’s Camaros for all of your restoration and replacement needs for your 1969 1st gen Camaro! Learn More
$82.99 ea.
Camaro Motor Mount Set, Small Or Big Block, 1967-1968, 307 & 327ci, Red, Polyurethane, Prothane, 1969 Part # UR-2002
Reduce Engine Travel Far Superior In Strength To Rubber Components Red Urethane Won't Deteroriate Like Rubber Ideal For Higher HP Engines Includes Zinc Plated Mounting Bracket Fits 1967-68 Small Block & Big Block Engines Fits 1969 307 & 327 Engines For Use With Engine Mounts, Part # EP-4 Or EP-6   The motor mounts in your 1967, 1968, or 1969 first generation Camaro will need to be replaced after approximately every 50,000 miles, or if they become soaked from fluids like oil several times. From excessive use and abuse, the mounts get weak and will not secure your engine properly. The rubber from the original mounts can degrade and split, eventually leading to failure. Also, when accelerating or decelerating, if you feel or hear a loud noise from under your car, you should check for signs of fan to shroud contact on your radiator core or fan shroud. If you indeed have this fan impact, you can be sure that your motor mount is broken. The motor mounts on your Chevy Camaro are crucial for reducing vibration and extending the life of your engine and its components. If your mounts break or grow weak, it can be dangerous since this can allow the engine to shift, possibly sticking the accelerator in a full throttle position or causing the engine to push the fan into the radiator or fan shroud. Rick’s Camaros is happy to offer this new set of polyurethane motor mounts for your F-Body’s small or big block engine. This pair of urethane block motor mounts will fit both the driver’s and passenger’s side, has polyurethane bushing material, and includes a zinc plated mounting bracket for easy installation. This will help to reduce any wheel hop or traction loss, and is guaranteed to be much stronger than your rubber originals. Don’t wait to stay safe and comfortable in your Chevrolet. From racers, show cars, hot rods, and daily drivers, you can trust Rick’s Camaros for all of your restoration and replacement needs for your 1967, 1968, or 1969 1st gen Camaro! Learn More
$79.99 ea.
Camaro Motor Mount Safety Bracket, Big Block, 1969 Part # EP-191
Reproduction Bracket Fits 396 And 427 Big Block Engines Works With Original Style Motor Mounts Only Mounts Between Engine Block And Motor Mount See RPO L35, Page 286 In The 1969 Camaro Factory Assembly Manual The engine mounting brackets on your 1969 Camaro are made to secure your engine motor mounts, which are meant to keep your engine in place and away from the radiator core or fan shroud. All parts are essential in your F-Body, but your mount bracket can rust over time from fluid exposure or from the constant barrage of outside elements. Eventually your brackets may lose their hold and fall off or break, leaving your motor mount and other engine components vulnerable. Rick’s Camaros is happy to offer these new replacement safety engine frame mount brackets, made from high quality materials and correct stamped steel with correct thickness. These metal brackets attach between the engine block and motor mount of your Chevy Camaro, and are sold individually. Don’t wait to keep your engine components secure, and get a new pair of engine motor mount brackets today. From racers, show cars, hot rods, and daily drivers, you can trust Rick’s Camaros for all of your restoration and replacement needs for your 1969 Camaro! Learn More
$54.99 ea.
Camaro Motor Mount Safety Bracket, Small Block, 1969 Part # EP-190
Reproduction Bracket Fits 302, 307, 327 And 350 Small Block Engines Works With Original Style Motor Mounts Only Mounts Between Engine Block And Motor Mount See RPO Z28, Page 472 In The 1969 Camaro Factory Assembly Manual   The engine mounting brackets on your 1969 Camaro are made to secure your engine motor mounts, which are meant to keep your engine in place and away from the radiator core or fan shroud. All parts are essential in your F-Body, but your mount bracket can rust over time from fluid exposure or from the constant barrage of outside elements. Eventually your brackets may lose their hold and fall off or break, leaving your motor mount and other engine components vulnerable. Rick’s Camaros is happy to offer these new replacement safety engine frame mount brackets, made from high quality materials and correct stamped steel with correct thickness. These metal brackets attach between the engine block and motor mount of your Chevy Camaro, and are sold individually. Don’t wait to keep your engine components secure, and get a new pair of engine motor mount brackets today. From racers, show cars, hot rods, and daily drivers, you can trust Rick’s Camaros for all of your restoration and replacement needs for your 1969 Camaro! Learn More
$54.99 ea.
Camaro LS-1 Motor Mounts Upgrade, IFS Assembly, 1967-1969 Part # 33-10552
Select From Steel Or Polished Chrome Made In The U.S.A. This is the LS-1 motor mount upgrade for the independent front suspension package. The 35-10537 or 35-10538 front end assembly must be purchased first to upgrade to these LS-1 motor mounts. NOTE: This Is An Upgrade To LS-1 Motor Mounts From Small Block/ Big Block Motor Mounts Normally Received With Part Numbers 35-10537 & 35-10538. Learn More
$209.99 pr.
Camaro Engine Frame Mounts, Small Block, Except 1969 302 & 350ci, 1967-1969 Part # EP-4
Reproduction Engine Frame Mounts Correct Stamped Steel Correct OE Thickness For Small Block Engines (Except 302 & 350) Fits 1st Gen Camaro Models Note: Technically Correct  For 1969 302/350 (EP-128 Pair Also Available)   The engine mounting brackets on your 1967, 1968, or 1969 Camaro are made to secure your engine motor mounts, which are meant to keep your engine in place and away from the radiator core or fan shroud. All parts are essential in your F-Body, but your mount bracket can rust over time from fluid exposure or from the constant barrage of outside elements. Eventually your brackets may lose their hold and fall off or break, leaving your motor mount and other engine components vulnerable. Rick’s Camaros is happy to offer these new OEM replacement engine frame mount brackets, made from high quality materials and correct stamped steel with OE thickness. These metal brackets attach to the crossmember of your Chevy Camaro, and are sold individually. Don’t wait to keep your engine components secure, and get a new pair of engine motor mount brackets today. From racers, show cars, hot rods, and daily drivers, you can trust Rick’s Camaros for all of your restoration and replacement needs for your 1967, 1968, or 1969 Camaro! Learn More

Was: $39.99 pr.

Now: $33.99 pr.
Camaro LS1 Motor Mount Adapters, 1967-1997 Part # 721828
Bolts To All LS1, LS2, LS3 & LS6 Engines Unpolished Billet Aluminum-Paintable Stainless Steel Hardware Included Will Also Fit 2000 Or Newer Vortec Truck Engines These motor mount adapters are designed to fit between the factory motor mounts and the engine block of any LS1, 2, 3, 6 and Vortec Truck V8's produced after 2000. Learn More
$109.99 pr.
Camaro Motor Mount Set, Small Block, 1967-1968, 307 & 327ci, Solid Steel, Moroso, 1967-1969 Part # EP-147
Reduce Excessive Engine Movement Eliminates Torque Loss & Binding Linkage No Need For Torque Straps Or Chains Gold Zinc Plating Includes Mounting Bracket Fits 307 & 327 Small Block Engines Fits 1967-1968 1st Gen Camaros   The motor mounts in your 1967 or 1968 first generation Camaro will need to be replaced after approximately every 50,000 miles, or if they become soaked from fluids like oil several times. From excessive use and abuse, the mounts get weak and will not secure your engine properly. The rubber from the original mounts can degrade and split, eventually leading to failure. Also, when accelerating or decelerating, if you feel or hear a loud noise from under your car, you should check for signs of fan to shroud contact on your radiator core or fan shroud. If you indeed have this fan impact, you can be sure that your motor mount is broken. The motor mounts on your Chevy Camaro are crucial for reducing vibration and extending the life of your engine and its components. If your mounts break or grow weak, it can be dangerous since this can allow the engine to shift, possibly sticking the accelerator in a full throttle position or causing the engine to push the fan into the radiator or fan shroud. Rick’s Camaros is happy to offer this new set of solid steel motor mounts for your F-Body’s engine. This pair of steel block motor mounts will fit both the driver’s and passenger’s side, has steel bushing material, and includes a zinc plated mounting bracket for easy installation. This will help to reduce any wheel hop or traction loss. Don’t wait to stay safe and comfortable in your Chevrolet. From racers, show cars, hot rods, and daily drivers, you can trust Rick’s Camaros for all of your restoration and replacement needs for your 1967 or 1968 1st gen Camaro! Learn More
$39.99 ea.
22 Item(s) Sort by: Show: per page Grid  |  List
3