Product Experts Available 1-800-359-7717

1969 CAMARO STANDARD ANTENNAS

Search Term: 'All Parts'
Category: 'Antennas'
Vehicle: '1969 CHEVY CAMARO STANDARD'
17 Item(s) Sort by: Show: per page Grid  |  List
Camaro Radio Antenna Ground Plate, Front, 1967-1975 Part # AR-10
Reproduction of Original Gold Cad Plated One Required Per Car The antenna ground bezel is mounted under the fender around the antenna body. When the bezel comes in contact with the underside of your Camaro fender and the bezel nut is tightened around the antenna body, the antenna body is held firmly in place. The antenna ground bezel also helps take some of the local static out of your favorite radio program. Replace that rusty original ground bezel today with a new one from Rick's First Generation. Learn More
$5.99 ea.
Camaro Radio AM/FM Antenna Cable, Front Mount, With Antenna Body, 1969 Part # AR-19
High Quality Reproduction AM/FM Antenna Correct Length Cable Plated Antenna Body Attached Grommet Fender Mount   Finding a technically correct antenna can be tough. Rick's Camaros is proud to offer a high-quality replacement antenna cable for your 1969 Camaro. This AM/FM antenna cable is routed from under the fender, through the door jamb area and finally under the dash to the radio. Over time, they can become brittle and crack exposing the core. This causes static and lead to very poor reception. Replace your 1969 Camaro's worn out antenna  today with this reproduction from Rick's Camaros and keep the tunes going. Learn More

Was: $18.99 ea.

Now: $15.99 ea.
Camaro AM/FM Radio Antenna Mast, 1969 Part # AR-3
Reproduction Of Original Correct Fixed Length AM/FM Antenna Mast Learn More

Was: $24.99 ea.

Now: $16.99 ea.
Camaro Retrosound Amplified Hide Away Antenna, AM/FM Part # 33-10114
105" Cable Allows For Installing Anywhere Active Magnetic Field Circuitry Installs In Seconds High Gain AM/FM   The new RetroAntenna™ HPA1 amplified hide-away antenna from RetroSound® allows you to get great AM/FM reception without having to use standard fender-mount or window antennas. The HPA1 installs in seconds, using a standard Motorola antenna plug and your radio’s power antenna wire, and can be installed almost anywhere in your vehicle thanks to the supplied 105-inch antenna cable and power lead. Never worry again about a stolen or damaged fender-mount or roof-mount antenna. This antenna uses active magnetic field circuitry for enhanced radio reception. (Note: This antenna is designed for mounting inside a vehicle, and is not weather or heat resistant)   Learn More
$21.99 ea.
Camaro Antenna Bezel Nut, 1969 Part # AR-6
Stock Replacement Fits 1969-75 Front Fits 1969 Rear This stock replacement antenna bezel nut is manufactured by GM or by one of its authorized suppliers for use as a factory replacement part. You will find the fit, finish and function meets all GM specifications. Using stock replacement parts from Eckler's, such as this antenna bezel nut, is a sound investment in the restoration or repair of your Camaro. Learn More

Was: $14.99 ea.

Now: $7.99 ea.
Camaro Antenna Bezel, Front, Chrome, 1969-1975 Part # AR-2
Hard chrome diecast. Front fender mount only. Original GM replacement part (note: has correct fender angle but, alignment tab is 180 degrees off) Learn More

Was: $12.99 ea.

Now: $10.99 ea.
Camaro Ground Strap Set, Engine Compartment, 1969 Part # AR-15
Best Quality Reproduction Ground Straps Woven Copper Strap Material Serrated Washer Ends Keeps Interior Electronics Functioning Properly Correct For 1969 Camaro Restoration Purposes Includes All 4 Straps And Placement Diagram 1969 Camaro restorations are all about the little details and this ground strap set is one of those little things. However, these ground straps ground the engine to the subframe and then the subframe to the body of your Camaro. Think you won't need these ground straps? Leave them off of your 1969 Camaro and the interior electronics like the radio will not work properly. Buy the best parts for your Camaro restoration from Rick's Camaros and know you are getting the best parts at the best possible price. Learn More
$19.99 Set
Camaro AM-FM Antenna, Hide-Away, Amplified, Custom Autosound, 1967-2002 Part # AR-100
Multiple Mounting Options No Drilling Or Grounding Required Must Be Wired To Switched 12 Volt Source Includes 104" Power Lead & Antenna Cable Why break up the clean lines of your custom Camaro with an external antenna? Custom Autosound offers an interior-mounted hidden antenna as a great alternative. This active magnetic type, amplified electronic AM/FM antenna gives optimum radio reception without drilling or grounding. It requires 12VDC power that is switched on with the ignition. For best reception, the adhesive-backed antenna body must be unobstructed by metal. It's typically mounted to the top inside of the windshield or on the rear window/package shelf area. The pre-wired 104" long power lead and antenna cable allows you to find just the right spot for installation and it can be extended if necessary. Rick's First Generation has all the best audio accessories for your Camaro. Learn More
$37.99 ea.
Retro Style Flaming Antenna Topper Part # 88-2215
Add A Little Fun To Your Antenna! Vinyl Flames Flap In The Wind Choose From: 8-Ball, Devil, Skull, Mr. Horsepower, Rat Fink & Eyeball Flaming Devil & Rat Fink Have Eyes And Teeth That Glow-In-The-Dark! Flaming Skull Has A Hinged Jaw Retro stuff is really cool and nothing is as cool as these flaming antenna ball toppers! Each topper has vinyl flames that flap in the wind as you are rolling down the road in your classic ride and adds a little fun to your car show or cruise in display. Choose from Mr. Horsepower, Rat Fink, Red Devil, Eight Ball, Screaming Skull & Blood-shot Eyeball. The flaming Devil and Rat Fink both have eyes and teeth that glow in the dark while the hinged jaw on the skull lets him scream down the road! Learn More
$5.99 ea.
Camaro Antenna Bezel Gasket, 1967-1969 Part # AR-8
Stock Replacement Correct Black Shouldered Gasket For Front or Rear Antenna Rick's First Generation keeps this Original GM part to make your antenna installation correct. Black shouldered gasket comes with the correct indexing mark and keeps the chrome antenna bezel from scratching the fresh paint job on top of your Camaro fender or rear quarter panel. Trust Rick's for all your Camaro restoration needs. Learn More

Was: $2.99 ea.

Now: $1.99 ea.

Was: $139.99 ea.

Now: $109.99 ea.
Camaro Antenna Template, Front Fender, 1969 Part # ANT-12
Reproduction Antenna Template Positions Location Of Front Antenna Body Hole Makes Installations Quick & Easy To Follow! Has Full Measurements & Dimensions Includes Hole Marks For Exact Location For 1st Gen Camaro Models If you have had to replace your fender of quarter panels on your 1969 first generation Camaro, you may have noticed a slight problem regarding your front antenna. Your new front fender panel does not come with a properly aligned pre-drilled hole for your antenna assembly! Rick's Camaros is here to solve your problems with this antenna template for your front antenna installation for your F-Body. This template accurately positions the location of your front antenna body hole. It is easy to use, and the full size digitally rendered placement guide locates the exact front fender panel location, quickly and professionally. This template ensures that the holes through your front panel is properly aligned to allow the antenna to rise and lower effectively. It will look like the factory original! From racers, show cars, hot rods, and daily drivers, you can trust Rick's Camaros for all of your restoration and replacement needs for your 1969 1st gen Camaro! Learn More

Was: $12.99 Kit

Now: $9.99 Kit
Camaro Antenna Template, Rear Quarter Panel, 1967-1969 Part # ANT-10
Reproduction Antenna Template Exact Locating Template Makes A Quick & Simple To Follow Installation Positions Location Of Rear Antenna Body Hole For 1st Gen Camaro Models If you have had to replace your fender of quarter panels on your 1967, 1968, or 1969 first generation Camaro, you may have noticed a slight problem regarding your rear antenna. Your new quarter panel does not come with a properly aligned pre-drilled hole for your antenna assembly! Rick's Camaros is here to solve your problems with this antenna template for your rear antenna installation for your F-Body. This template accurately positions the location of your rear antenna body hole. It is easy to use, and the full size digitally rendered placement guide locates the exact rear quarter panel location, quickly and professionally. This template ensures that the holes through your rear panel is properly aligned to allow the antenna to rise and lower effectively. It will look like the factory original! From racers, show cars, hot rods, and daily drivers, you can trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968, or 1969 1st gen Camaro! Learn More

Was: $11.99 Kit

Now: $10.99 Kit
Camaro Radio Antenna Cable, Rear Mount, With Antenna Body, 1969 Part # AR-41
Technically correct, use with original antenna parts only. For rear antenna installations. Learn More
$39.99 ea.
Camaro Front Telescoping Antenna Assembly, AM Radio, 1969 Part # AR-29
Fender mount only. Includes original AM telescoping antenna mast and all original and correct reproduction parts. Limited availability. Learn More
$199.99 Kit
Camaro AM Radio Antenna Assembly Kit, Rear, 1969 Part # AR-37
First time available. Includes original (NOS) AM telescoping antenna mast and all original and technically correct reproduction parts. Limited availability. (Note: antenna mast included but not pictured) Learn More

Was: $209.99 Kit

Now: $189.99 Kit
Camaro AM/FM Radio Antenna Assembly Kit, Front, 1969 Part # AR-1
1969 Front mount only. Complete assembly with all parts. Correct appearance including antenna mast (not shown) Learn More

Was: $69.99 Kit

Now: $52.99 Kit
17 Item(s) Sort by: Show: per page Grid  |  List
1