Product Experts Available 1-800-359-7717

Filter Your Results

  1. Remove This Item CATEGORY: Emissions
CATEGORIES
  1. Emissions Hardware (3)
  2. Emissions Hose Kits (2)
  3. Emissions Pumps (7)
  4. PCV Valves (10)
BRAND
  1. AC Delco (1)
  2. General Motors GM (4)
PRICE
  1. $0.00 to $4.99 (6)
  2. $5.00 to $19.99 (5)
  3. $30.00 to $49.99 (5)
  4. $50.00 to $99.99 (4)
  5. $100.00 to $149.99 (2)
 

1969 CAMARO STANDARD EMISSIONS

Search Term: 'All Parts'
Category: 'Emissions'
Vehicle: '1969 CHEVY CAMARO STANDARD'

22 Item(s) Sort by: Show: per page Grid  |  List
Camaro PCV Hose, With Pinch Clamps, 1967-1981 Part # RC-87
Reproduction of Original Long, Cut to Length Hose Molded 90° End (2) Correct Black Pinch Style Clamps Nice reproduction of the original Camaro Positive Crankcase Ventilation (PCV) hose. On most Camaro applications the PCV hose runs from the PCV valve in the valve cover or oil fill tube (molded end) to a large fitting on the base plate of the carburetor. Replace your original oily, cracked original PCV hose with a new one from Rick's First Generation. Learn More
$15.99 ea.
Camaro PCV Hose Pinch Clamp, Black, 1967-1980 Part # RC-89
Reproduction Of Original Black Oxide Finish Fits Most 1/2” PCV Valve & Brake Booster Hoses These little black pinch clamps are used on the engine for various 1/2” hoses. Usually, they are found on the PCV valve, the brake booster and the intake where these meet the intake fittings. Replace your incorrect worm gear clamps with these correct black oxide pinch clamps today from Rick’s and keep your car show fresh! Learn More
$1.99 ea.
Camaro Valve Cover Grommet, PCV, Small Block, Steel, 1968-1969 Part # SG-80
Correct for 68 SB LH valve cover with PCV and 69 SB RH steel valve cover . Learn More
$4.99 ea.
$3.99 ea.
Camaro PCV Valve, 396/375hp, 1967-1968, All Small Block Except 302ci, 1968-1969 Part # RC-88
Correct style American made PCV valve. Use with 67-68 396/375 and all 68-69 small blocks excluding 302. Learn More
$6.99 ea.
Camaro Crankcase Vent Hose, Molded, Small Block, Cowl Induction, 1969 Part # SBC-12
Quality Reproduction Reinforced Rubber For Cowl Induction Small Block Cars ONLY Length = 4½" Large End ID = .940" Small End ID = .750" Rick's offers this quality reproduction of the Cowl Induction crankcase vent hose to keep your restoration technically correct. This hose runs from the elbow on the valve cover up to the elbow on the bottom of the Cowl Induction air cleaner and is an integral part of the PCV system on your Camaro. Keep your car show and go ready with this quality reproduction from Rick's First Generation. Learn More

Was: $16.99 ea.

Now: $15.99 ea.
Camaro Emissions Hose Clamp, 5/16", Yellow, 1967-1981 Part # 749200
Reproduction Of Original Bright Yellow Paint Fits 5/16" Emission & Fuel Hoses Some Applications Used Up To 12 Clamps For The EEC System A Functioning EEC System Required In Most Emission Controlled States In 1970 under increasing pressure from EPA regulations, GM began to add evaporative emissions controls to many vehicles. The Camaro was no exception. Keep your emissions system functioning properly by replacing your hose clamps with these quality reproductions from Rick's All Generations. NOTE: What is EEC? EEC is an acronym for Evaporative Emission Control. It usually appears as a second and third vent port at the front of the gas tank. These ports act as a return line from the charcoal canister, fuel pump and vapor separator. EEC usually appeared on vehicles produced for sale in California and other emissions controlled states. Learn More
$1.09 ea.
Camaro AC Delco, PCV Valve Grommet, 1967-1995 Part # 33-11624
Restoration Correct Correct Fit Fits Inline 6 And V8 Engines Made In USA Are you finding oil leaks or smke from your 1967-1995 Camaro? Ricks Camaros offers this AC Delco replacement PCV Valve Grommet. The PCV valve is an important part of a cars emissions control system. The acronym stands for Positive Crankcase Ventilation. The valve takes unburned "blowby" gases, gases that have escaped the combustion chambers by slipping past the pistons into the crankcase and funnels them back into the intake manifold, where they ultimately rejoin the air-fuel mixture and are reburned. The PCV valve essentially recycles these escaped gases, reducing air pollution and preventing moisture buildup inside the engine. Don't settle for just any replacement part for your 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995 Camaro, use AC Delco replacement part, the same part that came from the factory. Trust Ricks Camaros for all your parts needs. Learn More
$3.99 ea.
Camaro PCV Hose Support Clip, 396/375hp, 1967-1969 Part # RC-90
Clip attaches to carb stud. Accurate reproduction for 396/375 applications. Learn More

Was: $39.99 ea.

Now: $15.99 ea.
Camaro PCV Valve Cover Grommet, For Steel Valve Cover, 1969 Part # SG-81
PCV grommet for LH steel valve cover used with all 69 small block. Learn More
$4.99 ea.
Camaro Air Injection Reactor (AIR) System Hose Kit, Small Block, 1969 Part # RC-600
Correct ribbed hoses with part numbers, clamps, white stripe vacuum tubing and tie strap. Learn More
$39.99 Set
Camaro Smog Check Valve, Air Injection Reactor (AIR) System, Small Or Big Block, 1967-1969 Part # RC-602
Correct Reproduction Smog Air Injection Check Valve Single Inlet Valve Improves Air Emissions Gold Iridite Plating As Original For Small & Big Block Engines Fits 1967-1969 1st Gen Camaro Models The exhaust manifold air injection tubes are important for reducing the exhaust smog fumes from your 1967, 1968, or 1969 first generation Camaro. Especially when starting up your car, the engine can emit a heavy amount of smog, which can be harmful to your F-Body, as well as the space around your car. Rick's Camaros now offers these reproduction smog tubes, extension tubes, and check valves, part of the injection reactor tubes from the Air Injection Reactor (AIR) engine system, manufactured to replace your original worn tubes and valves. Acting as a smog inhibitor pump to instead emit clean air, the single inlet check valve works to vastly improve your air emissions. Each tube is manufactured with correct bends and outlets for installation onto the exhaust manifold. A correct threaded outlet head is installed for easy installation of the smog pump check valves, and is produced in a gold iridite plating just like the original. Aside from looking great among your engine compartment, these smog tubes are a great environmental decision for your Chevy Camaro. From racers, show cars, hot rods, and daily drivers, you can trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968, or 1969 1st gen Camaro! Learn More
$54.99 ea.
Camaro Air Injection Reactor (AIR) System Hose Kit, Big Block, 1969 Part # RC-601
Correct ribbed hoses with part numbers, clamps, white stripe vacuum tubing and tie strap. Learn More
$39.99 ea.
Camaro Diverter Valve Elbow, Air Injection Reactor (AIR) System, Small Or Big Block, 1969-1976 Part # RC-611
High Quality Reproduction Diverter Valve Aluminum Construction Correct OEM Stamping Used On 302, 350, 396, LS5 And LS6     The smog diverter elbow play an integral role in you r 1969, 1970, 1971, 1972, 1973, 1974, 1975 or 1976 Camaro’s AIR system. The diverter elbow bolts between the smog pump and diverter valve. The Air Injection Reactor System was used by GM in the late 1960s and early 1970s. Chances are your car came with smog control. When you are restoring your original AIR system, look no further than Rick’s Camaros for the correct parts to get the job done right. Take this diverter elbow for example. The OEM style aluminum construction ad correct stamping make this the perfect restoration part. You can count on Rick’s Camaros for all your 1969, 1970, 1971, 1972, 1973, 1974, 1975 or 1976 Camaro restoration parts, large or small. Learn More
$44.99 ea.
Camaro Smog Pump, 396ci V8, 1968-1970 Part # 33-12201
Remanufactured Camaro Smog Pump 396ci V8 Engine 6.5L Cleaner Emissions Are you hearing a noise or is the smog pump missing from your 1968-1970 Camaro? Ricks Camaros has this remanufactured replacement pump available to clear the air and to keep your Camaro running at the standard it deserves. Just in time for show car season or that cruise to the local soda shop, Ricks Camaros has the correct smog pump for your 1968, 1969, and 1970 Camaro. Trust Ricks Camaros for all your parts needs and to ensure the highest quality for your Camaro. Learn More
$116.99 ea.
Camaro Air Injection Reactor (AIR) Pump, Small Or Big Block, 1968-1971 Part # SMS-24
Application is for all 68-9 Small Block or Big Block. Rebuilt original smog pump is not show quality finish. Learn More
$129.99 ea.
Camaro Air Injection Reactor (AIR) Pump Pulley, 396/325-350hp, 1968-1969 Part # SP-234
Restored original pulley - tested, cleaned and fully plated in correct gray phosphate. Learn More
$94.99 ea.
Camaro Air Injection Reactor (AIR) Smog Pump Pulley, 302ci & 396/375hp, Deep Groove, 1969 Part # SP-458
Reproduction Stamped Steel Deep Groove For High Horsepower Engines Nice reproduction of the Smog system pulley for the Camaro. This pulley attaches over the smog pump fan and is driven off of the crankshaft. Learn More
$99.99 ea.
22 Item(s) Sort by: Show: per page Grid  |  List
1