Product Experts Available 1-800-359-7717

1969 CAMARO Z28 AIR CONDITIONING AND HEATING

Search Term: 'All Parts'
Category: 'Air Conditioning and Heating'
Vehicle: '1969 CHEVY CAMARO Z28'
Items: 1 to 28 of 69 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. 3
  4. Next
Grid  |  List
Best Sellers
Camaro Heater Hose Clamp, 5/8", Tower, 1969 Part # RC-352
Correct Reproduction Galvanized Finish Slotted Hex Head Screw Fits 5/8" Heater Hose Two Required Per Car Rick's offers this non-dated coded tower style hose clamp for the restorer who wants a Camaro that looks factory correct without going to all of the expense of having date codes on everything. Tower clamps like this were used on all 1969 Camaro heater hoses from the factory and being cold galvanized they were very susceptible to rust and corrosion. Replace yours today with the correct part from Rick's First Generation and keep your Camaro looking factory correct and show fresh. Learn More
$3.99 ea.
Camaro Heater Hose Clamp, 3/4", Tower, 1969 Part # RC-353
Correct Reproduction Galvanized Finish Slotted Hex Head Screw Fits 3/4" Heater Hose Two Required Per Car Rick's offers this non-dated coded tower style hose clamp for the restorer who wants a Camaro that looks factory correct without going to all of the expense of having date codes on everything. Tower clamps like this were used on all 1969 Camaro heater hoses from the factory and being cold galvanized they were very susceptible to rust and corrosion. Replace yours today with the correct part from Rick's First Generation and keep your Camaro looking factory correct and show fresh. Learn More
$3.99 ea.
Camaro Fenderwell Heater Hose Bracket, 1967-1981 Part # HC-44
Reproduction Of Original Finished In Correct Black Unlike Some That Are Silver Cadmium Plated This high-quality, correct heater hose bracket from Ricks Camaros will add stunning detail to your engine compartment. This Correct style inner fender lock down bracket with factory style push in head is coated in the factory-style, black oxide finish for added corrosion resistance. This bracket serves an important function and also make a key detail difference at any car show. Ricks Camaros is glad to bring you another high quality part to make your Camaro stand out above the crowd. Learn More
$7.99 ea.
Camaro Heater Hose, With GM Markings, 1967-1969 Part # HC-8
Reproduction Of Original Technically Correct For 1967 & 1968 Black Reinforced Rubber GM Markings On One Hose Only As Original   The hoses on your 1967, 1968, or 1969 Camaro are absolutely vital to keep everything running smoothly and temperature-controlled air flowing freely in your vehicle. As such, these hoses need to remain protected so that they continue to work properly. Rick's Camaros offers this technically correct heater hose, made from black reinforced rubber, to replace your original worn or cracked hose. With GM Markings on the hose just like the original, you can be sure that our reproduction hose will exactly match original GM factory specifications. Don’t try to get a generic replacement hose from your F-Body Camaro; be sure that you are getting the right fit, and the best quality. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968, or 1969 Camaro! Learn More
$26.99 pr.
Camaro Heater Blower Motor Resistor Assembly, For Cars Without Air Conditioning, 1967-1981 Part # HC-27
Premium Quality Blower Motor Resistor Replaces Original Exactly For 1967-1981 Camaros Without Air Conditioning Located On Top Of Under Dash Heater Box   Having trouble getting hot air out of your Chevrolet Camaro’s heater system on anything other than a high speed? The problem is most likely your blower motor resistor! This little fiberglass board uses a series of progressive resistors to regulate the motor’s speed throughout the switch range. The highest speed of the heater blower motor is not controlled by the resistor. Because of this, when the resistor fails, the fan will often work on the highest speed setting and not any lower speed. You shouldn’t have to settle for getting just one speed. Rick’s Camaros understands that sometimes, just a little heat is all that you need. Trust Rick’s Camaros to not only to get your 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980 or 1981 Camaro running right, but also making it an enjoyable place to be. Learn More

Was: $24.99 ea.

Now: $21.99 ea.
Camaro Heater Control Lever Repair Kit, 1969 Part # HC-46
Reproduction of Original Die Cast Slider as Original For Cars With or Without Air Conditioning Incorrect Knob Three Required per Car (For Kit See Part # 33-10489) Correct Knobs Available Separately as our Part # IN-154 Quality reproduction of an easily broken part. The slider is the die cast part which the knob attaches to and you grab with your fingers to select hot, cold, defrost or fan. Why replace the entire heater or AC control in your Camaro when you can just replace the sliders? Repair your original heater control with this quality reproduction from Rick's First Generation. Learn More
$19.99 ea.
Camaro Astro Vent Outlet, Dash, Side, 1969 Part # IN-56
Best Quality Reproduction  Mounts On Each Side Of Dash Vent Is Accurately Reproduced In Every Detail Two Required Per Car This Astro dash vent outlet is the nicest reproduction outer vent outlet available on the market for your 1969 Camaro. This is not a reproduction of the later model replacement vent that simply "fills the hole," but rather is an accurate reproduction of the vent which came in your Camaro, down to the most minute details! Replace your broken or discolored original vent outlet with a new outer dash vent from Rick's Camaros to keep the air flowing and to keep your Camaro looking its absolute best! Trust Rick's Camaros for all of your restoration and replacement needs. Learn More
$26.99 ea.
Camaro Heater Control Knob Set, 1967-1969 Part # IN-154
Reproduction Of Original 3-Piece Set This Camaro reproduction heater control knob set has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit, finish and function will work superbly for your restoration. In addition, using a reproduction heater control knob set from Rick's will add authenticity and value to your Camaro. Learn More

Was: $12.99 Set

Now: $11.99 Set
Camaro Engine Fan Belt, Restoration Correct Part # MS-1889
GM Licensed, Original-Style Belt Use With Original Pulley Set Up Correct GM Part Number On Belt If Applicable Photo Shown For Clarity Purposes Only Every Camaro will need replacement belts eventually. Whether you have a daily driver, show car, or you're finishing your restoration,Eckler's Rick's Camaros offers a variety of belts for all your Camaro's needs. Whether you're replacing all your belts or just a broken one, Eckler's Rick's Camaros has the engine belts you are looking for. Closely patterned after the originals, these engine belts feature correct cloth material and GM stamping where applicable. Eckler's Rick's Camaro is proud to offer the most authentic belts available for your Camaro project. Learn More
Camaro Heater Box Seal Kit, Small Block, 1967-1969 Part # WS-14
Reproduction of Original Without Air Conditioning Cars Only For Cars with Small Block Heater Boxes Only Contains all Major Inner Heater Box Seals    1967, 1968, 1969 Camaro heater box seals are a critical replacement when working on any F-Body heater box. These Camaro heater box seals create an air-tight seam among critical heater box components. Using low quality or used heater box seals will lead air leaks and degrade the performance of your Chevrolet Camaros heating & air conditioning systems. Ricks Camaros has sourced our seals to keep your 1967, 1968, 1969 Chevy Camaro ventilation system performing its best for years to come.   NOTE: The heater core tube gasket in this kit is 1/2" thick and made of closed-cell foam. For the original style thick rubber gasket, please use our part # HC-65. Learn More
$18.99 ea.
Camaro Heater Control Cable Retaining Clips, 1967-1969 Part # HW-35
Original Style Reproduction Spring Steel Clips Set Of 4  Push clips as original for connecting heater cables to heater box and heater control. These clips are hard to remove and they are usually destroyed or fly off to nowhere when they do come off. Rick's offers these push style clips to replace your originals. Learn More
$2.99 Set
Camaro Heater Core, Small Block & 6 Cylinder, For Cars Without Air Conditioning, 1967-1969 Part # HC-20
Replacement Style Fits 6 cylinder, Small Block Cars Without Air Conditioning New Core High Tensile Strength Solder Used at all Joints Original Style Heater Core Clips Available Separately as our Part # HC-63 Rick's has sourced the best quality heater cores for your restoration because replacing the heater core is a task you really only want to do once. Replacing the heater core can be done much easier before all of the dash is installed. Replace you original core today before you have a passenger's side floor and carpet full of antifreeze.   NOTE: These new heater cores are slightly smaller than original. This may require the core clips to be bent or shimmed to accept the new core. Unfortunately, there is no manufacturer making an exact duplicate of the original heater core. Learn More
$79.99 ea.
Camaro Heater Box To Firewall Fasteners, 1967-1981 Part # 33-10683
Restoration Correct Hardware Correct hardware Like Original Includes 5 Self Threading Nuts, 5 Rubber Washers, And 2 Sheet Metal Screws Are you replacing that old worn out or dented heater box cover? If so Rick's has what you need to bolt that new box to the firewall. This correct heater box to firewall hardware kit includes everything you need to get the box installed with no headaches. Ricks has everything for your restoration project even down to the small stuff. NOTE: Be sure to use a sealant when installing the new box. Do not over tighten the self threading nuts which should be a minimum of 10 lbs.in. Sheet metal screws should be tighten to 25 lbs.in. This is recommended after 24 hours of applying sealant. Learn More
$6.99 Set
Camaro Heater Box Wire Retaining Clip, 1969 Part # HC-29
Show Quality Reproduction Plated And Coated As Original Mounts To Heater Box Cover Mounting Stud This 1969 Camaro reproduction wiring retaining clip holds the heater box wire on top of the heater box. It is easy to replace and makes your Camaro look like you went the "extra mile" with your restoration. You will find the fit; finish and function will work perfectly for your Camaro. Trust Rick's Camaros for all your 1969 restoration and replacement need. Learn More
$3.99 ea.
Camaro Heater Control Panel Assembly, For Cars Without Air Conditioning, 1969 Part # HC-55
Officially Licensed Reproduction Comes With New Fan Speed Switch And Control Cables Nice New Clear Lens And Chrome Knobs   Camaro heater control panel is the comfort center of your prized 1969 Camaro. Nothing is worse than a misbehaving F-Body Camaro heater control panel when it’s cold outside. Problems can include lose or broken control arms, disintegrating levers slider bushings, missing knobs, malfunctioning blower switch or missing, faded or broken control lens. Rebuilding your 1969 Chevy Camaro heater control panel use to be the only solution. Now you can own a brand new F-Body 1969 Camaro heater control panel ready to be installed with simple hand tools. Die casted like the original, this 1969 Camaro heater control panel features update lever design, correct control lens and a brand new blower switch already pre-installed. Nothing looks better in a restored, hot rod or daily driver 1969 Camaro then a brand new heater control panel from Ricks Camaro. Learn More
$239.99 ea.
Camaro Heater Box Firewall Cover, Small Block, 1967-1981 Part # HC-62
Reproduction Of Original Mounts On Firewall Covers The Heater Core Firewall heater box cover missing, badly dented or rusted out? Rick's Camaros has the answer with this 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981 Camaro reproduction of original heater box cover. The firewall box hangs out in the engine compartment where it can be damaged from an engine swap and it is exposed to the elements making it prone to rust. This premium quality Camaro heater box improves the engine compartment while protecting the stock heater core location. Trust Rick's for only the best parts like this heater firewall box for your 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, and 1979, 1980, 1981 Camaro! Learn More

Was: $34.99 ea.

Now: $32.99 ea.
Camaro Heater Hose Fittings, Big Block 1967-1969 & Small Block, 1969 Part # WP-21
Correct nipple set for 67-69 Big blocks and 69 small blocks with or without AC. Plated. Pair only. Learn More
$17.99 pr.
Camaro Heater Hose, Ribbed, 1967-1969 Part # HC-9
Reproduction Technically Correct For 1969 Black Reinforced Rubber Ribbed Down The Length Of The Hose As Original Quality reproduction of the original ribbed heater hoses for 1969 Camaros. Why go to the parts store and buy a generic hose for your restoration? Buy the correct style hose from Rick's and make your Camaro stand out from the rest. Learn More
$35.99 pr.
Camaro Center Dash Air Conditioning Vent Insert, 1969-1978 Part # 33-10919
Correct Design Center A/C Vent Black Outer Case With Chrome Outer Edge Correct Rounded Outer Edge Two Required Per car Not Sold In Pairs Ricks Camaros is offering this center dash air conditioning vent insert for your 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977 and 1978 Camaro. Don't let tarnished, dingy or cracked center vent hold up your interior restoration project. This high quality center dash insert will finish off your interior restoration for your 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977 and 1978 Camaro. Choose Ricks Camaros for all your restoration needs. Learn More
$14.99 ea.
Camaro Heater Control Panel Lens, For Cars Without Air Conditioning, 1969 Part # HC-13
Reproduction Of Original Correct Green Lettering Replaces Worn Faded Or Broken Control Lens For Heater Cars Only Camaro heater control panel lens for your 1969 Camaro is a must have for any restoration, hot rod or daily driver. Camaro heater control lenses are made to correct specifications using only the highest manufacturing techniques to ensure you get a part authentic to the day your Camaro was made. High quality acrylic plastic is injected in molds made on modern CNC machines to ensure maximum fit over original handmade tooling. Then our 1969 Chevy Camaro heater control panel lens is pad-printed with correct font & color while correct background shadowing is applied. Ricks Camaros is always sourcing, testing and communicating with the world’s top manufactures to bring you the very best in quality restoration parts such as this 1969 Chevrolet Camaro heater control plate at the best price possible. Learn More
$19.99 ea.
Camaro Side Dash Vent With Housing, Without Air Conditioning, Left, 1969 Part # IN-191
Reproduction Of Original Chrome Plated Plastic Vent With Correctly Textured Fins Injection Molded ABS Plactic Housing Housing Features Correct Mounting Holes Foam Bushings On Vent Roller Surface For Smooth Operation Learn More
$89.99 ea.
Camaro Side Dash Vent With Housing, Without Air Conditioning, Right, 1969 Part # IN-192
Reproduction Of Original Chrome Plated Plastic Vent With Correctly Textured Fins Injection Molded ABS Plactic Housing Housing Features Correct Mounting Holes Foam Bushings On Vent Roller Surface For Smooth Operation Learn More
$89.99 ea.
Camaro Heater Core Clips, Small Block, 1967-1969 Part # HC-63
Reproduction of Original This Camaro reproduction heater core clips has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit & finish will work superbly for your restoration. In addition, using the reproduction heater core clips from Rick's will add authenticity and value to your Camaro. Learn More
$39.99 pr.
Camaro Heater Hose Fitting Set, Big Block, 1967-1974 & Small Block, Hex Head, Stainless Steel, 1967-1974 Part # WP-24
Made in the USA with T-304 stainless for a high quality show appearance. Fits 67-69 BB and 69 Small block with or without AC. Learn More
$27.99 pr.
Camaro Fenderwell Heater Hose Bracket, Stainless, 1967-1981 Part # HC-70
Nice Stainless Up Grade 2 Piece Design Retains Heater Hoses To Fenderwell Hardware Included   Learn More
$31.99 ea.
Camaro Heater Delete Plate, Bolt-In, Detroit Speed, 1967-1981 Part # DS-96
Easy Way To Smooth Firewall Made Of 18-Gauge Steel Bolt-In, No Welding Required For Original Heater Cars Only Learn More
$89.99 ea.
Camaro Heater Control Cable Set, For Cars Without Air Conditioning, 1969 Part # AC-89
Set of 3 heater control cables with inner poly liner for smooth operation. Reproduction cables have metal ends on cables. Learn More
$49.99 ea.
Camaro Air Conditioning Evaporator Case Drain Tube, 1967-1970 Part # AC-57
Show Quality Reproduction Includes Molded Rubber Drain & Clamp Attaches To Factory Drain On The Bottom Of The Evaporator Box The evaporator drain tube allows the evaporated water to drain from the bottom of the box while keeping ambient temperature air, dust and dirt out of the evaporator core. Replace your damaged or missing one today with this quality reproduction from Rick's. Learn More

Was: $12.99 ea.

Now: $10.99 ea.
Items: 1 to 28 of 69 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. 3
  4. Next
Grid  |  List
1