Product Experts Available 1-800-359-7717

1969 CAMARO Z28 GAS TANKS

Search Term: 'All Parts'
Category: 'Gas Tanks'
Vehicle: '1969 CHEVY CAMARO Z28'
22 Item(s) Sort by: Show: per page Grid  |  List
Camaro Gas Tank Anti-Squeak Insulator Set, 1967-1969 Part # FT-7
Best Quality Reproduction Fuel Tank Anti-Squeak Set Anti-Pop Pad Made of Closed Cell Foam Strap and Trunk Floor Support Liners Made of Vinyl 5 Piece set One Set Required per Car Originally, GM used a tacky, tar-like anti-squeak set on top of the fuel tank only. Rick's First Generation offers this kit to keep the metal to metal noise and the mess on your Camaro to a minimum. This set contains material to cover all areas of the tank which may have problems with metal on metal contact. Use the right parts for your restoration from Rick's First Generation.   NOTE: For ease of installation, a small amount of general spray adhesive may be applied to the tank to make the anti-squeak kit adhere during tank installation. Learn More
$21.99 Kit
Camaro Gas Tank Sending Unit, 3/8", 1967-1969 Part # FT-33
Quality Reproduction Fits All 1968 V8 Engines Fits 1969 302, 396/375hp & All With 2-Barrel 3/8” Outlet Tube 0-90 Ohm Range Includes O-Ring Seal & Filter Your 1968-1969 Camaro fuel sending unit spends its life in a very inhospitable environment and it is prone to fail. Rick’s offers this quality reproduction fuel sender to keep your F-Body Camaro fuel gauge reading correctly. Don’t be caught on the side of the road out of gas! Replace your 1968-1969  fuel sending unit today with this quality reproduction from Rick’s. NOTE: The ground strap must be attached to the frame rail for the fuel sender to function properly. Many times this ground wire can be pulled loose from the sender during tank installation resulting in the fuel gauge pegging past full. Learn More
$49.99 ea.
Camaro Gas Tank Sending Unit Locking Ring, 1967-1969 Part # FT-15
Eckler's Select Series Locks sender to gas tank. (Note: lock rings and seals are included with reproduction gas tanks only).   Learn More
$4.99 ea.
Camaro Gas Tank Sending Unit Locking Ring Seal / Gasket, 1967-1969 Part # FT-17
 Reproduction Of Original Lock Rings & Seals Are Included With Reproduction Gas Tanks Only Eckler's Select Series This Camaro reproduction gas tank sending unit gasket has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit, finish and function will work superbly for your restoration. In addition, using a reproduction gas tank sending unit gasket from Rick's will add authenticity and value to your Camaro.   Learn More
$2.99 ea.
Camaro Gas Tank Mounting Straps, Stainless Steel, 1967-1969 Part # FT-47
Restoration Correct Gas Tank Straps Stainless Steel Finish Correct Length And Bend One Set Required Per Car Bolt Set Available Separately, Part # FT-8    Have the gas tank straps on your 1967, 1968 or 1969 Camaro began to rust over? Rick's Camaros is proud to offer these high quality fuel tank straps. Each fuel tank strap is made from stainless steel for maximum corrosion resistance, properly bent to factory specifications and feature double bent ends for added strength. Using rusty and over-stretched fuel tank straps on your 1967, 1968 or 1969 Camaro Standard, Rally Sport (RS), Super Sport (SS) or Z28 is not only an eyesore, but prone to failure. Trust Rick's for all of your gas tank needs!  Learn More
$39.99 pr.
Camaro Gas Tank Strap Bolt Set, 1967-1969 Part # FT-8
Reproduction of Original (2) Correct Plated Carriage Bolts (2) Flat Washers (4) Flanged Hex Nuts These bolts are the only bolts which hold the gas tank into your Camaro. The gas tank straps attach to the front of the trunk floor support, run under the gas tank and fasten near the tail pan with this bolt set. They are very prone to rust. Replace your Camaro's old gas tank strap bolts with this quality reproduction from Rick's First Generation.   Learn More
$5.99 ea.
Camaro Gas Tank Strap & Mounting Kit, Stainless Steel, 1967-1969 Part # FT-41
Restoration Correct Gas Tank Straps Stainless Steel Finish Correct Length And Bend One Set Required Per Car Includes Stainless Steel Hardware   Have the gas tank straps on your 1967, 1968 or 1969 Camaro began to rust over? Rick's Camaros is proud to offer these high quality fuel tank straps. Each fuel tank strap is made from stainless steel for maximum corrosion resistance, properly bent to factory specifications and feature double bent ends for added strength. Using rusty and over-stretched fuel tank straps on your 1967, 1968 or 1969 Camaro Standard, Rally Sport (RS), Super Sport (SS) or Z28 is not only an eyesore, but prone to failure. Trust Rick's for all of your gas tank needs!    Learn More

Was: $54.99 Kit

Now: $39.99 Kit
Camaro Gas Tank, 1969 Part # FT-19
Reproduction Of Original 18 Gallon / 68 Liters Size 38 3/8" X 20 7/8" X 7 3/4" Includes Sending Unit Locking Ring And Seal Eckler's Select Series While gas tanks can be used for a long time, they can become damaged from guel misuse, as well as rusting from weather conditions. Rick's Camaros offers this famous Eckler's Select Series reproduction gas tank that has been manufactured to match factory specifications and will replace your original gas tank. It has tin construction like the original, and can hold up to 18 gallons. Including the sending unit locking ring and seal, you will have all you need for a full gas tank replacement on your Camaro. Whether your original tank is damaged, or you would simly like a more updated look to make your Camaro really pop, this Select Series gas tank reproduction is exactly what you need. Trust Rick's Camaros for all of your restoration and replacement needs for your 1969 Camaro! Learn More
$129.99 ea.
Camaro Fuel Tank Sender Wiring Harness, 1969 Part # 97607
Best Quality Reproduction Fuel Sender Wiring Most Common Replaced Item When Pulling The Fuel Tank Out Of Your Camaro Replaces Cut Or Broken, Fragile Original Includes Correct Tan Wire With Correct Gauge Correct Black Grommet & Plug  Your 1969 Camaro does not need to be paraded around town with old, cracked and sub-standard wiring harnesses. This is a safety hazard which can cause your beloved Camaro to literally go up in smoke. Rick's Camaros has the best quality reproduction wiring harness available for your 1969 Camaro restoration. So, if you are restoring a Super Sport (SS), a Rally Sport (RS), a Z28 or a plain jane Camaro coupe or convertible, Rick's Camaros has the best parts like this fuel sending unit wiring harness for your Camaro restoration always at the best possible price. Learn More

Was: $16.99 ea.

Now: $15.99 ea.
Camaro Gas Tank Sending Unit In-Tank Filter, 3/8", 1967-1981 Part # FT-16
Filter inside gas tank attached to end of fuel sender. For 3'8 line. Learn More
$13.99 ea.
Camaro Gas Tank Straps, OE Steel, Show Correct, 1967-1969 Part # FT-6
Restoration Correct Gas Tank Straps Correct Galvanized Finish Correct Length And Bend One Set Required Per Car Bolt Set Available Separately, Part # FT-8    Have the gas tank straps on your 1967, 1968 or 1969 Camaro began to rust over? Rick's Camaros is proud to offer these high quality fuel tank straps. Each fuel tank strap is made from galvanized steel for maximum corrosion resistance, properly bent to factory specifications and feature double bent ends for added strength. Using rusty and over-stretched fuel tank straps on your 1967, 1968 or 1969 Camaro Standard, Rally Sport (RS), Super Sport (SS) or Z28 is not only an eyesore, but prone to failure. Trust Rick's for all of your gas tank needs!    Learn More
$31.99 pr.
Camaro Gas Tank Sending Unit, 3/8", Original GM, 1968-1969 Part # FT-12
Factory AC Delco Part Fits All 1968 V8 Engines Fits 1969 302, 396/375hp & All With 2-Barrel Carburetor 3/8” Outlet Tube 0-90 Ohm Range Includes O-Ring Seal & Filter The fuel sending unit spends its life in a very inhospitable environment and it is prone to fail. Rick’s offers this factory replacement fuel sender to keep your fuel gauge reading correctly. Don’t be caught on the side of the road out of gas! Replace your fuel sending unit today with this factory replacement from Rick’s. NOTE: The ground strap must be attached to the frame rail for the fuel sender to function properly. Many times this ground wire can be pulled loose from the sender during tank installation resulting in the fuel gauge pegging past full. Learn More
$179.99 ea.
Camaro Gas Tank Sending Unit, 3/8", With 1/4" Return Line, 1969 Part # FT-34
Quality Reproduction Fits 1969 350-4 Barrel, 396/325 & 350hp 3/8 Outlet Tube & 1/4 Return Line 0-90 Ohm Range Includes O-Ring Seal & Filter The fuel sending unit spends its life in a very inhospitable environment and it is prone to fail. Ricks offers this quality reproduction fuel sender to keep your fuel gauge reading correctly. Dont be caught on the side of the road out of gas! Replace your fuel sending unit today with this quality reproduction from Ricks. NOTE: The ground strap must be attached to the frame rail for the fuel sender to function properly. Many times this ground wire can be pulled loose from the sender during tank installation resulting in the fuel gauge pegging past full. Learn More

Was: $59.99 ea.

Now: $49.99 ea.
Camaro Gas Tank Straps, OE Steel, Repair Approved, 1967-1969 Part # FT-68
Restoration Correct Gas Tank Straps Correct Galvanized Finish Correct Length And Bend One Set Required Per Car Bolt Set Available Separately, Part # FT-8   Have the gas tank straps on your 1967, 1968 or 1969 Camaro began to rust over? Rick's Camaros is proud to offer these high quality fuel tank straps. Each fuel tank strap is made from galvanized steel for maximum corrosion resistance, properly bent to factory specifications and feature double bent ends for added strength. Using rusty and over-stretched fuel tank straps on your 1967, 1968 or 1969 Camaro Standard, Rally Sport (RS), Super Sport (SS) or Z28 is not only an eyesore, but prone to failure. Trust Rick's for all of your gas tank needs!  Learn More
$19.99 pr.
Camaro Gas Tank, Stainless Steel, 1969 Part # FT-43
Replacement Stainless Steel Gas Tank Will Never Rust 18 Gallon / 68 Liters Size 38 3/8" X 20 7/8" X 7 3/4"   This Camaro replacement stainless steel gas tank has been manufactured to meet or exceed factory specifications and performance. You will find the fit; finish and function will work perfectly for your Camaro. You will also be pleased to know that Rick's has sourced this stainless steel gas tank among other possible parts as the best choice for your repair or restoration project. Learn More
$279.99 ea.
Camaro Gas Tank Sending Unit, Detroit Speed & Engineering (DSE), Part # DS-52
Use Only With DSE Gas Tanks DS-46 & DS-47 Compatible With GM Or Aftermarket Fuel Gauges Features 0-90 Ohm Resistance Range Detroit Speed & Engineering simplifies tubbing your custom Camaro with this gas tank sending unit designed exclusively for their stainless steel 19 gallon narrowed gas tank. The 0-90 ohm resistance range is compatible with GM or aftermarket fuel gauges for great versatility. Learn More
$49.99 ea.
Camaro Gas Tank Sending Unit In-Tank Filter, 5/16", 1967-1981 Part # FT-44
Reproduction Of Original For 5/16 Fuel Line   This Camaro reproduction fuel tank filter has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit; finish and function will work superbly for your restoration. In addition, using a reproductionfuel tank filter from Rick's will add authenticity and value to your Camaro. Learn More

Was: $15.99 ea.

Now: $11.99 ea.
Camaro Gas Tank, EFI Converted, 1969 Part # FT-46
Direct Replacement 18 Gallon / 68 Liters Size 38 3/8" X 20 7/8" X 7 3/4" 0-105 Ohm Fuel Sending Unit Electronic fuel injection seems to be all the rage these days. Everywhere you look, Camaro's are running around with LS motors, LT1's and Ramjets. Converting over to these modern systems means more reliability, power, better gas mileage and a dressier engine bay. Converting over usually means modification to the fuel tank at great time and expense. These ready to install fuel tanks utilize a factory style stamped fuel tank and electric fuel pump that produce 85-115 PSI at 50-60 gallons per hour. All you have to do is install it in the place of your original, run 12 volts and fuel lines and your fuel system is ready. Besure that you prime the fuel pump first if not you could permanently damage the pump! No guess work, no more headaches when it comes to converting your 1969 Camaro to Fuel injection. Note  Priming  the fuel pump before hand will insure that the pump is not damaged and will last for many years to come.If the pump is not primed it could cause the pump to fail prematurely! Learn More
$549.99 ea.
Camaro Gas Tank Sending Unit, 5/16", 1968-1969 Part # FT-32
Quality Reproduction Fits All 1968-69 6-Cylinder 5/16 Outlet Tube 0-90 Ohm Range Includes O-Ring Seal & Filter The fuel sending unit spends its life in a very inhospitable environment and it is prone to fail. Ricks offers this quality reproduction fuel sender to keep your fuel gauge reading correctly. Dont be caught on the side of the road out of gas! Replace your fuel sending unit today with this quality reproduction from Ricks. NOTE: The ground strap must be attached to the frame rail for the fuel sender to function properly. Many times this ground wire can be pulled loose from the sender during tank installation resulting in the fuel gauge pegging past full. Learn More

Was: $54.99 ea.

Now: $49.99 ea.
Camaro Narrowed Gas Tank, Stainless Steel, Detroit Speed & Engineering (DSE), 1969 Part # DS-47
For Use With DSE Mini-Tub Conversion Kits Ideal For Carbureted Engines Features Direct Bolt-On Installation Requires DSE Gas Tank Sending Unit DS-52 Detroit Speed & Engineering has what you need for tubbing your custom Camaro including this stainless steel 19 gallon narrowed gas tank. It uses the original mounting location and includes stainless steel straps for a direct bolt-on installation. This gas tank arrives ready to hook up with a 1/2" NPT fuel pick-up fitting that's compatible with either a -8 AN or -10 AN fuel line. For consistent fuel flow this gas tank has internal baffles and is pressure tested to ensure a lifetime of leak-free performance. Learn More
$879.99 ea.
Fuel Tank Repair Kit Part # 88-3440-3
Will Work On All Types Of Metals and Most Fiberglass Five Piece Kit Re-Usable For Multiple Projects Bill Hirsch has been supplying sealer worldwide since 1965. Kit seal holes and seams better than any other sealer. It has greater strength and at the same time has the flexibility that a product of this type is required to have something other sealer do not have. It is a non porous coating and is not affected by alcohol, ethanol, or fuel additives. It will work on all types of metal and most fiberglass tanks where as some other sealers will not work on all metals or fiberglass tanks. Learn More
$49.99 Kit
Gas Tank Repair Kit, POR-15® Part # 88-0267-3
Ideal For Saving Metal Tanks With Minor Leaks Easy To Use The POR-15® kit outperforms ordinary kits because it is a complete kit that goes to the root of leaks and bonds to the metal whereas other products simply cover the leak. The kit includes TankClean™ to remove gum, sludge and varnish, MetalReady ™ to remove rust and prepare the tank for sealer, U.S. standard Tank Sealer™ to permanently seal the tank and Fuel Preservative And Stabilizer to keep fuel fresh and fuel systems trouble-free. The tank must be removed from the car to perform the repair. Cannot ship by air. Learn More
$91.99 Kit
22 Item(s) Sort by: Show: per page Grid  |  List
1