Product Experts Available 1-800-359-7717

1970 CAMARO Z28 GAS TANKS

Search Term: 'All Parts'
Category: 'Gas Tanks'
Vehicle: '1970 CHEVY CAMARO Z28'
18 Item(s) Sort by: Show: per page Grid  |  List
Camaro Gas Tank Sending Unit In-Tank Filter, 3/8", 1967-1981 Part # FT-16
Filter inside gas tank attached to end of fuel sender. For 3'8 line. Learn More
$13.99 ea.
Camaro Gas Tank Sending Unit, 1970-1973 Part # 729072
Reproduction Of Original Can Be Used With EEC Tank Or Non EEC Tank V8 With 3/8" Line Learn More
$59.99 ea.
Camaro Gas Tank Strap Bolts And Hardware, Kit, 1970-1973 Part # 729382
Reproduction Of Original (2) Correct Plated Carriage Bolts (2) Correct Length Spacers (2) Flat Washers (4) Flanged Hex Nuts These bolts are the only bolts which hold the gas tank into your Camaro. The gas tank straps attach to the front of the trunk floor support, run under the gas tank and fasten near the tail pan with this bolt set. They are very prone to rust. Replace your Camaro's old gas tank strap bolts with this quality reproduction from Rick's All Generations. Learn More
$8.99 Kit
Camaro Gas Tank, 18 Gallon, Without Evaporative Emissions Control, 1970 Part # 729400
Reproduction Of Original Includes Sending Unit Locking Ring & Seal Fits 1970 Cars Without EEC Charcoal Canister Without Vent Pipe Eckler's Select Series Quality reproduction gas tank for your Camaro at an affordable price! Replace that dirty and rusty original tank before you run fuel through that brand new crate motor and get it full of rust and gunk.   Learn More
$139.99 ea.
Camaro Gas Tank Mounting Straps, OE Steel, 1970-1973 Part # 729089
Restoration Correct Gas Tank Straps Correct Galvanized Finish Correct Length And Bend One Set Required Per Car Bolt Set Available Separately, Part # 729382   Have the gas tank straps on your 1970, 1971, 1972 or 1973 Camaro began to rust over? Rick's Camaros is proud to offer these high quality fuel tank straps. Each fuel tank strap is made from galvanized steel for maximum corrosion resistance, properly bent to factory specifications and feature double bent ends for added strength. Using rusty and over-stretched fuel tank straps on your 1970, 1971, 1972 or 1973 Camaro Standard, Rally Sport (RS), Super Sport (SS), Type LT or Z28 is not only an eyesore, but prone to failure. Trust Rick's for all of your gas tank needs!  Learn More
$29.99 pr.
Camaro Gas Tank Sending Unit Retainer/O-Ring Kit, 1970-1973 Part # 729349
Reproduction Of Original This Camaro reproduction gas tank sending unit retainer/o-ring kit has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit, finish and function will work superbly for your restoration. In addition, using a reproduction gas tank sending unit retainer/o-ring kit from Eckler's will add authenticity and value to your Camaro. Learn More
$7.99 Kit
Camaro Gas Tank Sending Unit, Detroit Speed & Engineering (DSE), Part # DS-52
Use Only With DSE Gas Tanks DS-46 & DS-47 Compatible With GM Or Aftermarket Fuel Gauges Features 0-90 Ohm Resistance Range Detroit Speed & Engineering simplifies tubbing your custom Camaro with this gas tank sending unit designed exclusively for their stainless steel 19 gallon narrowed gas tank. The 0-90 ohm resistance range is compatible with GM or aftermarket fuel gauges for great versatility. Learn More
$49.99 ea.
Camaro Gas Tank Mounting Straps, Stainless Steel, 1970-1973 Part # 729379
Restoration Correct Gas Tank Straps Stainless Steel Finish Correct Length And Bend One Set Required Per Car Bolt Set Available Separately, Part # 729382   Have the gas tank straps on your 1970, 1971, 1972 or 1973 Camaro began to rust over? Rick's Camaros is proud to offer these high quality fuel tank straps. Each fuel tank strap is made from stainless steel for maximum corrosion resistance, properly bent to factory specifications and feature double bent ends for added strength. Using rusty and over-stretched fuel tank straps on your 1970, 1971, 1972 or 1973 Camaro Standard, Rally Sport (RS), Super Sport (SS), Type LT or Z28 is not only an eyesore, but prone to failure. Trust Rick's for all of your gas tank needs!  Learn More
$49.99 pr.

Was: $17.99 ea.

Now: $16.99 ea.
Camaro Gas Tank Sending Unit In-Tank Filter, 5/16", 1967-1981 Part # FT-44
Reproduction Of Original For 5/16 Fuel Line   This Camaro reproduction fuel tank filter has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit; finish and function will work superbly for your restoration. In addition, using a reproductionfuel tank filter from Rick's will add authenticity and value to your Camaro. Learn More

Was: $15.99 ea.

Now: $11.99 ea.
Camaro Gas Tank, EFI Converted, Without Evaporative Emissions Control, 1970-1973 Part # 729320
Direct Replacement Tank Without EEC Outlets 18 Gallon / 68 Liters Size 40 1/8" X 20 5/8" X 7" 0-95 Ohm Fuel Sending Unit 3/8" Threaded Outlet 3/8" Flared Return Electronic fuel injection seems to be all the rage these days. Everywhere you look, Camaro's are running around with LS motors, LT1's and Ramjets. Converting over to these modern systems means more reliability, power, better gas mileage and a dressier engine bay. Converting over usually means modification to the fuel tank at great time and expense. These ready to install fuel tanks utilize a factory style stamped fuel tank and electric fuel pump that produce 85-115 PSI at 50-60 gallons per hour. All you have to do is install it in the place of your original, run 12 volts and fuel lines and your fuel system is ready. No guess work, no more headaches. Learn More
$549.99 ea.
Camaro Gas Tank, 18 Gallon, With Evaporative Emissions Control, 1970 Part # 729401
Reproduction Of Original Includes Sending Unit Locking Ring And Seal Includes Additional Take Offs For EEC System And Charcoal Canister Quality reproduction gas tank for your Camaro at an affordable price! Replace that dirty and rusty original tank before you run fuel through that brand new crate motor and get it full of rust and gunk. Learn More

Was: $139.99 ea.

Now: $129.99 ea.
Camaro Narrowed Gas Tank, Stainless Steel, With Fuel Injection Detroit Speed & Engineering (DSE), 1970-1973 Part # 729391
For Use With DSE Mini-Tub Conversion Kits Ideal For Carbureted Engines Features Direct Bolt-On Installation Includes Stainless Steel Gas Tank Straps Requires DSE Gas Tank Sending Unit DS-52 Detroit Speed & Engineering has what you need for tubbing your custom Camaro including this stainless steel 18 gallon narrowed gas tank. It uses the original mounting location and includes stainless steel straps for a direct bolt-on installation. This gas tank arrives ready to hook up. The DSE LS1 fuel pumps use a Walbro GSS340 electric in-tank pump that delivers 60-65 PSI @ 55gl/hr (on 13.5 volts). For consistent fuel flow this gas tank has internal baffles and is pressure tested to ensure a lifetime of leak-free performance. Learn More
$1,299.99 Kit
Fuel Tank Repair Kit Part # 88-3440-3
Will Work On All Types Of Metals and Most Fiberglass Five Piece Kit Re-Usable For Multiple Projects Bill Hirsch has been supplying sealer worldwide since 1965. Kit seal holes and seams better than any other sealer. It has greater strength and at the same time has the flexibility that a product of this type is required to have something other sealer do not have. It is a non porous coating and is not affected by alcohol, ethanol, or fuel additives. It will work on all types of metal and most fiberglass tanks where as some other sealers will not work on all metals or fiberglass tanks. Learn More
$49.99 Kit
Gas Tank Repair Kit, POR-15® Part # 88-0267-3
Ideal For Saving Metal Tanks With Minor Leaks Easy To Use The POR-15® kit outperforms ordinary kits because it is a complete kit that goes to the root of leaks and bonds to the metal whereas other products simply cover the leak. The kit includes TankClean™ to remove gum, sludge and varnish, MetalReady ™ to remove rust and prepare the tank for sealer, U.S. standard Tank Sealer™ to permanently seal the tank and Fuel Preservative And Stabilizer to keep fuel fresh and fuel systems trouble-free. The tank must be removed from the car to perform the repair. Cannot ship by air. Learn More
$91.99 Kit
Camaro Narrowed Gas Tank, Stainless Steel, With Carburetor Detroit Speed & Engineering (DSE), 1970-1973 Part # 729390
For Use With DSE Mini-Tub Conversion Kits Ideal For Carbureted Engines Features Direct Bolt-On Installation Includes Stainless Steel Gas Tank Straps Requires DSE Gas Tank Sending Unit DS-52 Detroit Speed & Engineering has what you need for tubbing your custom Camaro including this stainless steel 18 gallon narrowed gas tank. It uses the original mounting location and includes stainless steel straps for a direct bolt-on installation. This gas tank arrives ready to hook up with a 1/2" NPT fuel pick-up fitting that's compatible with either a -8 AN or -10 AN fuel line. For consistent fuel flow this gas tank has internal baffles and is pressure tested to ensure a lifetime of leak-free performance. Learn More
$949.99 Kit
Camaro Gas Tank, EFI Converted, With Evaporative Emissions Control, 1970-1973 Part # 729321
Direct Replacement 18 Gallon / 68 Liters Size 40 1/8" X 20 5/8" X 7" 0-95 Ohm Fuel Sending Unit With Vent Pipe Electronic fuel injection seems to be all the rage these days. Everywhere you look, Camaro's are running around with LS motors, LT1's and Ramjets. Converting over to these modern systems means more reliability, power, better gas mileage and a dressier engine bay. Converting over usually means modification to the fuel tank at great time and expense. These ready to install fuel tanks utilize a factory style stamped fuel tank and electric fuel pump that produce 85-115 PSI at 50-60 gallons per hour. All you have to do is install it in the place of your original, run 12 volts and fuel lines and your fuel system is ready. No guess work, no more headaches. Learn More
$549.99 ea.
18 Item(s) Sort by: Show: per page Grid  |  List
1