Product Experts Available 1-800-359-7717

1972 Camaro Parts For Sale - 1972 Chevy Camaro Parts


Search Term: 'All Parts'
Category: 'Steering'
Vehicle: '1972 CHEVY CAMARO'

Rick’s Camaros is your one-stop shop for 1972 Camaro parts. The 1972 Camaro was a Second Generation F-Body Camaro, spanning from years 1970-1981. 1972 included the Z28 Coupe, Super Sport Coupe, Rally Sport Coupe, and Standard Coupe. 1972 didn’t see many changes in appearance from the 1971 Camaro. Due to emission and tuning requirements, power ratings changed in 4 of 6 engines. Inner door panels were restyled to include map pockets and a coin tray, three-point combination seat and shoulder belt harnesses replaced the earlier separate lap and shoulder belt combinations, and new shifter mechanisms with 4-speed manual transmissions featured a push-down reverse lockout. 1972 was the last year to offer “Big Block” engines. Due to a 117 day strike on the one assembly plant that produced 1972 Camaros, there was a large production decline. In addition to carrying 2nd Generation 1972 Camaro parts, Rick’s Camaros has parts for all Camaro models available. We have all the parts and accessories you need to help restore your Generation Two 1972 Camaro, at the best prices! Trust Ricks for all of your restoration and replacement needs for your racer, show car, street rod, or daily driver.

Items: 1 to 28 of 80 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. Next
Grid  |  List
Best Sellers
Camaro Horn Contact & Turn Signal Canceling Cam, For Cars With Non-Tilt Steering Column, 1969-1975 Part # HR-133
Reproduction Canceling Cam For Turn Signals Plastic With Correct Diameter Brass Contact For Cars With Non-Tilt Steering Columns This part turns with the steering shaft which turns off the turn signals in your Camaro. The turn signal canceling cam also acts as the horn contact and the pin and spring is inserted in the tube to make contact when the horn button is pressed in your Camaro. Buy the best parts for your Camaro restoration from Rick's Camaros today. Learn More
$15.99 ea.
Camaro Power Steering Hose, Repair Approved, 1967-1980 Part # MS-1983
Best Quality Replacement Power Steering Hose For Camaro OE Style End Fittings Line Features OE Style Bends Choose From Pressure Hose Or Return Hose Camaro power steering systems take advantage of hydraulic pressure to ease steering. Camaro power steering hoses are subjected to the engine compartment's relentless heat and constant pressure from the pump's hydraulic fluid. As a result, hoses can wear out or burst causing steering to become virtually impossible. Do not take a chance with your classic Chevy Camaro. Rick's Camaros offers replacement power steering pressure and return hoses for your 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979 and 1980 Camaro. When you replace your power steering hoses you will soon realize more fluid steering, and overall, a safer ride. Learn More
Camaro Steering Shaft Coupler Repair Kit, Universal, 1967-1981 Part # HR-50
(2) Special Shouldered Bolts (2) Coupler Repair Bolts (1) Steering Coupler Repair Bushing Rick's First Generation has an inexpensive solution to a broken or worn steering coupler or "rag joint". This steering coupler repair kit replaces all the hardware and the steering bushing to give your Camaro a like new steering coupler. Repair your original one today with Rick's inexpensive kit. Learn More
$11.99 ea.
Camaro Steering Column Ignition Lock Sector Gear, For Cars Without Tilt Steering Wheel, 1969-1989 Part # HR-61
Stock Replacement   Commonly stripped gear that actuates the column ignition switch rod when the key is turned. For without tilt steering columns only. Learn More
$17.99 ea.

Was: $69.99 ea.

Now: $39.99 ea.
Camaro, Power Steering Pump Pulley Retaining Nut, 1967-1981 Part # PSP-38
High Quality Reproduction Correct, Thin Crush Nut Black Oxide Coating It's the details that win the points at car shows. But, you need the correct items to actually do the job they were supposed to do in the first place rather than a part that "might" work. This power steering pulley nut is no exception to the rule. Buy the best for your restoration from Rick's today! Learn More
$5.99 ea.
Camaro Steering Box To Frame Mounting Bolts And Washers, 1970-1981 Part # 721751
Reproduction Of Original (3) Hardened Hex Head Bolts (3) Hardened Beveled Washers Attaches Steering Box To Subframe Works With Delphi Fast Ratio Steering Boxes This steering box bolt set attaches the steering box to the front subframe of your Camaro. It doesn't make sense to trust your prized Camaros steering to 30-40 year old bolts which you painted to look pretty. Call it simple, inexpensive insurance. Buy this steering box bolt set from Rick's today and know you are getting the best parts at the best price. NOTE: Some original steering boxes around 1979 started coming from the factory with Metric threads. These bolts are SAE threads and will fit the same SAE threaded factory steering boxes. Correct bolts are not currently available in Metric threads. Learn More
$15.99 Set
Camaro Power Steering Hose To Steering Gearbox Retaining Bracket, 1967-1977 Part # PSP-24
Bracket attaches to gear box top bolt. Keeps hose from rubbing against steering box USA made. Learn More
$10.99 ea.
$4.99 ea.
Camaro Power Steering Pump Bracket Set, Small Block, 1969-1972 Part # PSP-57
Officially Licensed Reproduction Correct Stampings All Three Pump To Block Brackets Fits All Small Blocks With Long Water Pump Bracket Mounting Hardware Set Available As Our Part # PSP-43   Superior reproduction of the 1969 Camaro power steering pump brackets. Take all the guess work out of mounting your power steering pump. Replace the brackets with this correct reproduction from Rick's First Generation and know you are getting the correct parts for your Camaro.   How do I know if I have a long water pump or not? A quick test to see if your Camaro has a long or short water pump is to try to stick your hand between the water pump and the timing chain cover. If your hand will not fit between them, you have a short water pump. If your hand will fit, you have a long water pump. Learn More
$66.99 Set
Camaro Steering Wheel Installation Kit, Grant, 1967-2002 Part # 715358
Adapts Grant 3-Bolt Steering Wheels To 1970 & Up GM Columns Also Adapts Grant Steering Wheels To ididit Tilt Columns Learn More
$29.99 Kit
Camaro Power Steering Pump, Chrome, 1967-1974 Part # C-8488
Reproduction Power Steering Pump Chrome Finish Black Powdercoated Pump 5/8-18" Inverted Flare Outlet Pulley Not Included For 1967-1974 Camaros The power steering pump on your 1967, 1968, 1969, 1970, 1971, 1972, 1973, or 1974 Camaro can eventually fail from fluid leaks. Being a closed system, the steering pump relies on several components, and with leaks, can suffer from a starvation of fluid. Rick's Camaros is happy to offer this new, triple chrome plated power steering pump. It's supplied complete with a polished billet aluminum cap and a new pulley washer & bolt. You can complete the great dress-up look with the triple chrome plated pulley (P/N C-6176) that matches the cap. Manufactured with all new parts to factory specifications, Tuff Stuff uses special fixtures, plating racks and anodes to ensure the brightest finish. Not only will it look great under the hood, but it is essential for making your power steering work properly. From racers, show cars, hot rods, and daily drivers, you can trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968, 1969, 1970, 1971, 1972, 1973, or 1974 Chevrolet Camaro! Learn More

Was: $199.99 ea.

Now: $189.99 ea.
Camaro Idler Arm To Subframe Bolts, Washers and Nuts, 1967-1972 Part # SS-103
Reproduction Of Original (2) Hardened Hex Head Bolts (2) Lock Washers (2) Nuts Mounts Idler Arm To Subframe These bolts do a really important job and are well worth the money. They mount the idler arm to the front subframe. Don't trust your newly restored Camaro to an old set of bolts that you painted up to look nice. Replace your originals with this set of hardened original bolts, washers and a fresh set of nuts to be sure the idler arm is locked onto the subframe like it is supposed to be. Learn More
$7.99 Set
Camaro Power Steering Pump Cap, 1967-1981 Part # PSP-34
Generic replacement style cap in black as shown. Fits all pumps. Learn More
$4.99 ea.
Camaro Horn Cap Retainer, 1971-1981 Part # 715014
Reproduction Of Original Retains Horn Cap For RPO NK4 4 Spoke Sport Wheel Option   This Camaro reproduction horn cap retainer has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit and function will work superbly for your restoration. In addition, using a horn cap retainer from Eckler's will add authenticity and value to your Camaro. Learn More

Was: $7.99 ea.

Now: $6.99 ea.
Camaro Ignition Lock Cylinder, 1970-1978 Part # 735012
Best Quality Reproduction Correct Cylinder Correct Style Keys Ignition Switch Sold Separately If you just bought your Camaro, it is a good idea to change the ignition lock. Rick's Camaros makes it easy with this single ignition lock cylinder set. Replace yours today with this quality replacement lock cylinder from Rick's Camaros. Learn More

Was: $18.99 ea.

Now: $11.99 ea.
Camaro Idler Arm, 1970-1972 Part # 721429
This idler arm comes complete with arm, bracket, and bushings. Attaches the drag link or center tie rod to the right side of the front frame. Learn More
$49.99 ea.
Camaro Steering Wheel, Black Leather, With Brushed 3-Spoke Design, 1967-1989 Part # 33-10178
Best Quality Replacement Steering Wheel For Camaro 14" Diameter Replaces Original Wood Wheel Exactly Not As Deep As The Original Camaro Wood Wheel Black Simulated Leather Padded Rim Looking for a different or updated steering wheel for your Camaro? Look no further as Rick's has this great wheel that replaces your original wood wheel in your Camaro! Don't have a wood wheel in your Camaro? No Problem! See our complete steering wheel kits Part # 33-10176 for 67-68 or 33-10177 for 69-89. Learn More
$159.99 ea.
Camaro Center Drag Link, 1970-1981 Part # 721423
Correct Center Drag Link Pressed-In Cover Plate Design Grooves Built In To Allow Grease Flow Extends From Left Inner Tie Rod To Right Inner Tie Rod Pitman & Idler Arms Attach To Drag Link Fits 2nd Gen Camaros The center drag link is what allows your steering wheel to pivot your 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, or 1981 second generation Camaro's wheels through the rotation of the steering arm to the tie rod links. Rick's Camaros offers this new correct center drag link, which would extend from the left inner tie rod to the right inner tie rod, with the pitman and idlers arms attaching to the drag link. These Moog center links feature pressed-in cover plate design, eliminating excessive play and allowing for tighter tolerances. These links also use powdered-metal gusher-bearing design, which improves performance and extends their service life. Their grooves allow grease to flow through the bearing to the stud, providing a smooth, durable surface. You'd be crazy not to get this center drag link for your F-Body, which includes powdered metal bearings, sealed boots, domed cover plates, and forged studs. You can trust Rick's Camaros for all of your restoration and replacement needs for your 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, or 1981 2nd gen Camaro! Learn More
$79.99 ea.
Camaro Power Steering Pump Rear Brace, Small Block, 1969-1972 Part # PSP-29
Correct reproduction power steering pump rear brace for use with long neck water pump small block engines. OE gauge, accurate stamping. Officially Licensed GM Restoration Parts from Classic Headquarters. Learn More
$31.99 ea.
Camaro Hazard Switch Outer Knob, 1970-1981 Part # 706158
Stock Replacement This stock replacement hazard switch outer knob is manufactured by GM or by one of its authorized suppliers for use as a factory replacement part. You will find the fit and function meets all GM specifications. Using stock replacement parts from Eckler's, such as this hazard switch outer knob, is a sound investment in the restoration or repair of your Camaro. Learn More

Was: $3.99 ea.

Now: $1.99 ea.
Camaro Power Steering Gearbox, Variable Ratio, 3 To 3-1/2 Turns, 1967-1976 Part # P-18501
Professionally remanufactured gear box assembly. No core exchange required. Volume discounts do not apply. Ships UPS Overweight. Learn More
$249.99 ea.
Camaro AC Delco, Power Steering Pump Rebuild Kit, 1967-1995 Part # 33-11557
Restoration Correct Original AC Delco Part Correct Fit Fits V6 And V8 Engines Also Fits IROC-Z 89-90, RS 92-93, Z28 67-92 Made In USA Is the power steering pump leaking or noisy on your 1967-1995 Camaro? Ricks Camaros offers this correct AC Delco Power Steering Pump Rebuild Kit. When problems develop in the power steering pump, the pump will usually not deliver the pressure required to assist the driver in turning the steering wheel. The driver will notice a marked increase in the effort needed to turn the wheel. Most steering pump problems will be accompanied by loud noise. Depending on the nature of the problem, the noise might be a loud clicking or rattling, caused by a broken or defective pump vane. Or it might be a loud whine or moan, possibly indicating problems with a pump bearing or the input shaft. A loud growling noise can indicate a blockage inside the pump and a continuous loud swishing is often caused by a low power steering fluid level. Don't trust just any rebuild kit for your 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995 Camaro, use the original seals that the factory used on your pump. Trust Ricks Camaros for all your parts needs. Learn More
$14.99 Kit
Items: 1 to 28 of 80 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. Next
Grid  |  List