Product Experts Available 1-800-359-7717

1973 CAMARO Z28 SUSPENSION AND CHASSIS

Search Term: 'All Parts'
Category: 'Suspension and Chassis'
Vehicle: '1973 CHEVY CAMARO Z28'
Items: 1 to 28 of 117 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next
Grid  |  List
Best Sellers
Camaro Front Lower Shock Mounting Hardware, 1967-1979 Part # RC-436
Reproduction Of Original Set Of Four Bolts & Nuts This Camaro reproduction front shock absorber lower mounting hardware set has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit, finish and function will work superbly for your restoration. In addition, using a reproduction front shock absorber lower mounting hardware set from Rick's will add authenticity and value to your Camaro. Learn More

Was: $11.99 Set

Now: $10.99 Set
Camaro Sway Bar End Link Set, Front, 1970-2002 Part # 721212
Reproduction Of Original 2 Required Per Car This Camaro reproduction sway bar end link set has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit and function will work superbly for your restoration. In addition, using a reproduction sway bar end link set from Eckler's will add authenticity and value to your Camaro. Learn More
$11.99 Set
Camaro Rear Leaf Spring, Repair Approved, 1967-1981 Part # MS-1938
Highest Quality Reproduction Leaf Spring For Camaro Some Applications Licensed Reproduction Front Eye Bushing Installed Available For Original Mono Leaf Or Multi Leaf Rears For Small Block Or Big Block The best way to fix the sagging rear of your Camaro is to replace the rear leaf springs. Many Camaros out on the road today have the rear end sitting much lower than the front. The rear of your classic 1967, 1968, 1969, 1970, 1971, 1972,1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980 or 1981 Chevy Camaro is supposed to be level with the front end, not hanging down to the pavement. Here at Rick's Camaros we know not everybody is looking for an expensive show correct set of leaf spring and just want a high quality replacement for their Camaro. Rick's Camaros offers a selection high quality replacement leaf springs that will level your ride height and not cost an arm and a leg. Our leaf springs come in both mono leaf and multi leaf styles to get your 1967, 1968,1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980 or 1981, Rally Sport (RS), or Super Sport (SS), Z28, Type LT or Berlinetta sitting pretty again. Learn More
Camaro Upper Front Ball Joint, 1970-1981 Part # 721441
Highest Quality Lower Ball Joint Available Hardware Included 2 Required Per Car Learn More
$23.99 ea.
Camaro Leaf Spring Front Mounting Bracket J-Nut & Bolt Set, 1967-1981 Part # 33-10646
Stock Replacement Correct Black Oxide Plating Stronger Than Imported Reproductions 6 J-Nuts Per Set 6 Bolts Per Set Your 1967-1981 Camaro's J-nuts on the front leaf spring cup are constantly exposed to adverse weather conditions, meaning they usually end up so rusted that the spring mount bolts will strip out the threads on the bolt, or even break the clip. Rick's Camaros offers this leaf spring front mounting bracket set, complete with J-nuts and bolts, to replace your old rusted J-nuts and keep your leaf springs working smoothly. Matching factory specifications, this set is actually stronger than the imported reproductions, and has correct black oxide plating. This set contains six J-nuts and six bolts for your mounting bracket project. Don't wait until you have to them the J-nuts out in the middle of replacing your leaf springs; get this mounting kit today! Trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, or 1981 Camaro!   Learn More
$18.99 Set
Camaro Control Arm Bumper, Lower Front, 1970-1987 Part # 721195
Replacement Control Arm Bumper 2 Required Per Car Not Technically Correct, Will Function As A Replacement    This Camaro replacement lower control arm bumper has been manufactured to meet or exceed factory specifications and performance. You will find the fit; finish and function will work perfectly for your Camaro. You will also be pleased to know that Rick's has sourced this lower control arm bumper among other possible parts as the best choice for your repair or restoration project.   Learn More
$11.99 ea.
Camaro Rear Spring U-Bolts, For Cars With Multi-Leaf Springs, 1967-1981 Part # SS-23
Functional Quality Replacement For Cars with Multi-leaf Rear Leaf Springs Correct Diameter Longer Bolt and Thread Area For Different Applications Sold as a Pair For the budget-minded Camaro restorer Rick's First Generation offers this pair of U-bolts for Camaros with Multi-leaf Rears. Multi-leaf rears use one U-bolt per side and two T-bolts (our Part # RC-468) per side. Some restorers choose to use two U-bolts on either side for maximum strength. Buy the best parts for your restoration at one place: Rick's First Generation.   Learn More
$10.99 pr.
Camaro Leaf Spring Front Eye Bushing, 1967-1981 Part # SS-6
Best Quality Reproduction Leaf Spring Bushing Officially Licensed GM Restoration Part Original Factory Appearance With QS-9000/ISO/TS-16944 Manufacturing Fits Front Eyelet Of Leaf Spring Two Required Per Camaro Camaro suspension parts like this leaf spring front eye bushing are prone to fail over the years. Rick's offers the best parts at the best price for your Camaro and this leaf spring front eye bushing is no exception. If you need replacement bushings for your standard Camaro coupe or convertible, Super Sport (SS), Rally Sport (RS), Type LT, Berlinetta or Z28, look no further than Rick's Camaros. Fits: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980 or 1981 Learn More
$19.99 ea.
Camaro Leaf Spring Front Mounting Bracket J-Nuts, 1967-1981 Part # RC-469
Stock Replacement Correct Black Oxide Plating Stronger Than Imported Reproductions (6) Hex Bolts With Captured Washer (6) J-Nuts per Set One Set Required Per Car   Great stock replacement for J-nuts in the body of the Camaro used to hold the front leaf spring cup. These J-nuts are constantly exposed to elements which means they are usually rusted so badly that the spring mount bolts will strip out the threads or break the clip. Order your replacements today from Rick's First Generation before you have to cut them out in the middle of replacing your leaf springs. Learn More
$15.99 Set
Camaro Leaf Spring Front Eye Bushing Mounting Hardware, 1967-1981 Part # SS-43
Reproduction of Original Hex Head, High Grade, Fine Thread Bolt Sold Each Two Required per Car Leaf Spring J-nuts Available Separately as our Part # RC-469 Correct Leaf Spring Bolt Set Available Separately as our Part # RC-470 Quality reproduction of the front eye bushing leaf spring bolt. This bolt passes through the front eye bushing of the leaf spring attaching it to the front leaf spring cup. The threads are exposed to the elements and the bolt is usually destroyed trying to remove it. Purchase your front eye bushing leaf spring bolts today from Rick's First Generation before you find out you need them in the middle of your spring install. Learn More
$4.99 ea.
Camaro Coil Spring Spacer, Front, 1967-1981 Part # SS-220
Used By The Factory To Raise The Front Height On Camaros 3/8" Spacer Lifts Camaros Up From 3/4" To 1-1/2" Fits Between Front Lower Control Arm & Spring Used by assembly line workers to adjust the front end height on Camaros, this high impact black plastic coil spring spacer is found between the spring and the lower control arm. Most Camaros used two, some have been found with this spacer on only one side. In most cases, this 3/8 coil spring spacer will lift your Camaro from 3/4" to 1-1/2”. For the best performance and quality, count on Rick's to get you to the finish line. Learn More

Was: $14.99 ea.

Now: $13.99 ea.
Camaro Polyurethane Front Sway Bar End Links,1967-1992 Part # UR-14
Replacement Polyurethane Sway Bar End Links Fits Front 1967-02 And Rear 1982-02 Outlasts Original Rubber Bushings Decreases Suspension Deflection Connects Sway Bar To Lower A-Arm Your Choice Of Black Or Red Made In USA Lifetime Manufacturer’s Warranty Historically, the Camaro was really happy when going in a straight line. However, the SCCA/Trans-am Series guys really had to tweak the suspension to make the Camaro carve the corners. Times have changed! Rick’s offers these polyurethane anti-sway bar end links to help your Camaro really handle. Don’t feel like you are driving a boat down the road! Replace both of your end links with this pair of polyurethane links from Rick’s today and tighten up your suspension. Learn More
$24.99 ea.
Camaro Control Arm Bushings, Upper, Front, 1970-1973 Part # 721450
These control arm bushing pair includes 2 original type bushings to rebuild one control arm. Two required per car. Learn More
$14.99 pr.
Camaro Spring Installation Kit, for Multi-Leaf Spring Cars,1970-1981 Part # 721099
Best Quality Reproduction Camaro Leaf Spring Install Kit Includes High Quality Major Components To Make Leaf Spring Installation A Breeze While Leaf Spring installation on your 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, or 1981 can seem tedious, it would be a lot easier if you had all the materials needed at once, and those materials were of high quality. Your prayers are answered, as Rick's Camaros is offering this leaf spring installation kit for multi-leaf spring Camaros. This kit includes high quality major components to make your installation easy and reliable. The installation kit includes rear shackle kits, upper and lower rubber leaf spring pads, axle u-bolts and nuts, front eye bushings, and front spring perch bolts. You'll have everything you need to install your leaf springs perfectly on your Camaro. Trust Rick's Camaros for all of your restoration and replacement needs for your 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, or 1981 Camaro! Kit Includes: (2) Rear Shackle Kits (Complete with Bolts, Lock Nuts, Bushings & Plates) (2) Upper & Lower Rubber Leaf Spring Pads (4) Axle U-bolts & Nuts (2) Through Bolts With Nuts For Front Eye Bushings  (6) Front Spring Perch Bolts With Captured Washers & J-nuts      Learn More
$89.99 Kit
Camaro Shock Absorber, Front, Gas Charged, Heavy-Duty, KYB,1967-1981 Part # SS-19
KYB gas shocks provide excellent control and comfort. Engineered for demanding driving. Complete with hardware. Each. Learn More
$53.99 ea.
Camaro Leaf Spring Front Mounting Bracket Bolt Set, 1967-1981 Part # RC-470
Correct Reproduction of Original Black Oxide Plated (6) Hex Head, Type CA Point Bolts With Captured Washer One Set Needed per Car Leaf Spring J-Nuts Available Separately As Our Part # RC-469   Here they are! These bolts are the ones which attach the front leaf spring cup to the body of your Camaro. You remember the ones you had to cut off with an acetylene torch to get the leaf springs out because of all the rust? Leaf spring bracket bolts are constantly in contact with the elements and Rick's First Generation offers this correct reproduction to make your restoration easier. Learn More
$6.99 Set
Camaro Sway Bar Anchor Plate Bolt, 1968-1981 Part # 721975
High Quality Reproduction Anchor Plate Bolt Case Hardened Steel Four Required Per Vehicle    One of the best ways to tighten up your 1968-1981 Camaro's handling is installing a sway bar. Of course using the proper hardware is a must. Rick's Camaros offers a rear sway bar anchor bolt and nut set to attach the rear sway bar bracket to the anchor plate and spring perch. This case hardened steel bolt set is designed for heavy  duty (F41) suspension and is the same size and thread pitch as the GM original. Restore your 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978 or 1979 Camaro's  showroom new handling with reproduction suspension parts from Rick's Camaros. Learn More
$6.99 ea.
Camaro Tie Rod End Dust Boots, Polyurethane, 1967-2002 Part # UR-12
Replacement Dust Boots Outlasts Original Rubber Boots Your Choice Of Black Or Red Made In USA Lifetime Manufacturer’s Warranty Polyurethane replacement dust boots for the tie rod ends on your Camaro. These strong, polyurethane boots resist damage from sand, road salt and oils. The five-point sealing action prevents contamination and loss of tie rod end grease. Practice a little preventive mainenance by replacing your original rubber boots while you are replacing your tie rod ends or replace your old, cracked original boots today with these quality polyurethane tie rod end dust boots from Ricks today. Learn More
$4.99 pr.
Camaro Body Mount Bushing Set, Coupe Or T-Top, With SteelSleves,1973-1981 Part # 721805
Exact Reproductions Of Original Complete Kit Includes All Shouldered Rubber Bushings, Including Radiator Support Bushings With Steel Sleeves For Coupes & T-Tops   While not often thought about, subframe bushings can be very hazardous to your 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, or 1981 Camaro if worn down long enough. Rick’s Camaros wants to help in figuring out whether or not you need new subframe and radiator support bushings. Some symptoms of worn bushings could be uneven tire wear, “darting” when using the brakes, clunking from the front suspension, or moving left or right with no steering input while driving forward. You may also notice squeaking noises coming from your Camaro, which could mean a need for new radiator support bushings. Any of these things could mean that your bushings need replacing, and Rick’s Camaros is here to provide the best replacement bushing kits for subframe and radiator support. Replacing exact original factory specifications, our subframe bushing mount kit will exactly fit your original Camaro bushings. Our bushing mount kits are guaranteed to improve the handling and stiffness of your Camaro and reduce chances of uncontrolled steering movement or suspension clunking. These bushings are also guaranteed to last longer than stock rubber bushings. This kit, provided by Rick’s Camaros, includes six bushings with steel inserts, and six biscuit cushions. When checking and replacing the bushings of your Camaro, they can be inspected by looking at the top of bushing that sits between the subframe and body of your Camaro. Trust Rick’s Camaros to provide only the best replacement parts for your 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, or 1981 Camaro! Learn More
$64.99 Kit
Camaro Subframe Mounting Points Repair Plate Set, Lower, 1967-1981 Part # SS-65
Replace Rusted-Out Or Damaged Subframe To Body Mounting Points Heavy Die-Stamped Steel Plates Replacement Metal For All Three Mounting Points 6 Piece Set Welding Is Required   Nice replacement part for badly rusted subframe mount points from Rick's First Generation. Cut out your old plates, flush weld in these replacement plates and make your old Camaro subframe as good as new.   NOTE: These plates must be welded flush with the surrounding metal or subframe geometry could be seriously effected. On 1970-81 Camaros, the mount plate that welds to the under firewall mount must be trimmed to fit. 75-81 Subframes have some mounting holes moved forward. These plates will need to be aligned properly for use.     Learn More
$48.99 Set
Camaro Rear Spring Pad Kit, Polyurethane, 1970-1981 Part # 721062
Far Superior To Stock Rubber Components Precision Fabricated To Ensure The Highest Quality Fit Polyurethane is impervious to chemeical and elements which gives it outstanding strength and durability. Learn More
$24.99 Kit
Camaro Control Arm Shaft Stud Bolt & Locking Nuts, Upper, 1970-1979 Part # 721909
Technically Correct (4) Hex Head Knurled Bolts (4) Correct Locking Nuts One Set Required Per Car These bolts do a really important job and are well worth the money. They mount the front upper A-arms to the subframe. Don't trust your newly restored Camaro to an old set of bolts that you painted up to look nice. Replace your originals with this set of hardened original bolts and a fresh set of locking nuts to be sure the upper a-arms are locked in like they are supposed to be. Learn More
$19.99 Set
Camaro Rear Anchor Plate, Leaf Spring And Shock Absorber, Left Or Right, 1970-1981 Part # 721973
Reproduction Of Original For Vehicles Equipped With Multi-Leaf Springs Installs Below Leaf Springs To Hold Spring and Shock Absorber In Place Left Or Right Learn More
$32.99 ea.
Camaro Leaf Spring Mounting Bracket, Left, 1970-1981 Part # 721825
Reproduction Of Original This Camaro reproduction leaf spring mounting bracket has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit and function will work superbly for your restoration. In addition, using a reproduction leaf spring mounting bracket from Eckler's will add authenticity and value to your Camaro. Learn More
$35.99 ea.
Camaro Shock Absorber, Front, Gas, GR-2, KYB, 1970-1981 Part # 721004
Excellent Stock Replacement Shock Great Performance Great Price The KYB GR-2 line of shocks is one of the best replacement suspension components available. They feature the same twin tube design as the original equipment, but with heavier duty internal parts. The valving and pressures are more closely matched to the high performance suspension of your Camaro than any other replacement shock on the market. Learn More
$33.99 ea.
Camaro Rear Leaf Spring Shackle Assembly, 1970-1981 Part # 721019
Good Quality Reproduction Shackle Assembly For Camaro (4) Replacement Rubber Bushings (2) Shackle Side Plates (2) Through Bolts & Nuts Two Required Per Car Learn More
$34.99 Kit
Camaro Lower Shock Mounting Plate, Left, For Cars With Mini Tubs, Detroit Speed & Engineering (DSE), 1967-1981 Part # DS-16
Ideal For Use When Mini Tubbing Your Camaro Allows For The Use Of Larger Tires By Using Inboard & Staggered Shock Mounting Plates Are Stronger Than Stock & Use 1/2" U-Bolts & 1/2" Lower Shock Bolts Electroplated Finish For Use On 3" Axle Tubes Allows The Use Of Detroit Speed & Engineering Adjustable Leaf Spring Pads & U-Bolts Learn More
$41.99 ea.
Items: 1 to 28 of 117 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next
Grid  |  List
4