Product Experts Available 1-800-359-7717

Filter Your Results

  1. Remove This Item CATEGORY: Front Body Hardware
 

1979 CAMARO BERLINETTA FRONT BODY HARDWARE

Search Term: 'All Parts'
Category: 'Front Body Hardware'
Vehicle: '1979 CHEVY CAMARO BERLINETTA'
26 Item(s) Sort by: Show: per page Grid  |  List
Best Sellers
Aluminum Hood Pin Kit, Silver Part # 88-1316-3
Silver Aluminum Easy Installation Universal Kit Can Be Used On Hood Or Trunk Eckler's universal aluminum Hood Pin Kit is designed just like the ones's used in Nascar. These heavy duty hood pins will secure your hood or trunk yet still allow them to be quickly opened or removed. Every kit includes 2 hood pins, two torsion flip over clips, two self adhesive scuff plates, and the necessary hardware. Learn More
$9.99 Kit
Aluminum Hood Pin Kit, Black Part # 88-1323-3
Black Aluminum Easy Installation Universal Kit Can Be Used On Hood Or Trunk Eckler's universal aluminum Hood Pin Kit is designed just like the ones's used in Nascar. These heavy duty hood pins will secure your hood or trunk yet still allow them to be quickly opened or removed. Every kit includes 2 hood pins, two torsion flip over clips, two self adhesive scuff plates, and the necessary hardware. Learn More
$9.99 Kit
Aluminum Hood Pin Kit, Blue Part # 88-1322-3
Blue Aluminum Easy Installation Universal Kit Can Be Used On Hood Or Trunk Eckler's universal aluminum Hood Pin Kit is designed just like the ones's used in Nascar. These heavy duty hood pins will secure your hood or trunk yet still allow them to be quickly opened or removed. Every kit includes 2 hood pins, two torsion flip over clips, two self adhesive scuff plates, and the necessary hardware. Learn More
$9.99 Kit
Camaro Body Fastener Kit, Hex Head Style, Stainless Steel, 1978-1981 Part # 734037
Adds Custom Detailing Look Throughout Car With Hex Head Style Loctite Included 471 Pieces This fastener kit contains following separately packaged & labeled components: Front Body Mount Hood Latch & Catch Door Jamb Radio Support & Battery Box Front & Inner Fender, Windshield Washer, Recovery Tank Windshield Wiper Motor & Cowl Vent Front Bumper Trunk Hinge, Latch & Catch Rear Axel Stop Hood Hinge Heater & Air Conditioning Cover Door Hinge Brake & Fuel Line Learn More
$219.99 Kit
Tilt Hood Kit, Standard, Universal Part # 88-1340
High Strength Black Finish Industrial Steel Construction Adjustable Hood Hinge Detailed Instructions Limited Lifetime Warranty Professional Installation Recommended Tilt your hood the right way! This Tilt Hood Kit gives you the same custom look of many of world's top performance vehicles. This kit makes it easy to reverse the tilt on your hood! Not only does it give you a custom look, it also allows for easy access and maximum visibility, so everyone can see what your rocking under the hood! Learn More
$229.99 Kit
Power Portal Hood "Wing Vents" Black Upper & Lower With Rectangular Chrome Mesh Part # 88-3207
Fits All Makes & Models (Universal Fit) Fits Fiberglass, Steel, Aluminum, Or Carbon Fiber Hoods Sets Car Apart From Others D.I.Y. Installation With Basic Hand Tools No Body Shop Visit Or Paint Work Needed Before Or After Installation Trim Is Chrome Plated Or Powder Coated To Last Besides looking awesome in chrome or black powder coat frames with contrasting or matching stainless steel and black mesh screens, these Wing Vents move a lot of hot air out of the engine bay. Wing Vents give a great stand-alone look. And they are a great compliment to the Power Portal Hood Window. NOTE: Some cars have extensive under hood ribbing for ?air slap? (Fiberglass and Carbon Fiber hoods tend to require a very little.) Check your car prior to purchasing our Wing Vents for fit and location. Learn More

Was: $269.99 pr.

Now: $189.99 pr.
Aluminum Hood Pin Kit, Red Part # 88-1321-3
Red Aluminum Easy Installation Universal Kit Can Be Used On Hood Or Trunk Eckler's universal aluminum Hood Pin Kit is designed just like the ones's used in Nascar. These heavy duty hood pins will secure your hood or trunk yet still allow them to be quickly opened or removed. Every kit includes 2 hood pins, two torsion flip over clips, two self adhesive scuff plates, and the necessary hardware. Learn More
$9.99 Kit
Camaro Body Fastener Kit, Button Head Style, 1978-1981 Part # 734036
Reproduction Of Original Adds Custom Detailing Look Throughout Car With Button Head Style Loctite Included 471 Pieces This fastener kit contains following separately packaged & labeled components: Front Body Mount Hood Latch & Catch Door Jamb Radio Support & Battery Box Front & Inner Fender, Windshield Washer, Recovery Tank Windshield Wiper Motor & Cowl Vent Front Bumper Trunk Hinge, Latch & Catch Rear Axel Stop Hood Hinge Heater & Air Conditioning Cover Door Hinge Brake & Fuel Line Learn More
$229.99 Kit
Power Portal Hood "Wing Vents" Magna Water Guard Covers, "Remove Before Takeoff" Part # 88-3226
To Be Used With Wing Vents Keeps Water & Debris Out When Car Is Parked Magna Guards are for outside parking, washing without worry of overspray into your engine bay or for the unexpected rain at the show. These are made of laboratory grade magnetic bonding material and coated with Marquee grade printed overlay film. UV resistant from fade. Magna Water Guards are used on top of the Wing Vents. Part Numbers 88-3207, 88-3208, 88-3223, 88-3224, 88-3225 NOTE: Magna Water Guards should not be used when driving. The air beneath will cause them to blow off. Store flat to avoid damage. Learn More
$69.99 pr.
Aluminum Hood Pin Kit, Gold Part # 88-1315-3
Gold Aluminum Easy Installation Universal Kit Can Be Used On Hood Or Trunk Eckler's universal aluminum Hood Pin Kit is designed just like the ones's used in Nascar. These heavy duty hood pins will secure your hood or trunk yet still allow them to be quickly opened or removed. Every kit includes 2 hood pins, two torsion flip over clips, two self adhesive scuff plates, and the necessary hardware. Learn More
$9.99 Kit
Camaro Billet Aluminum Hood Hinges, Polished Finish, 1970-1981 Part # 754082
High Quality Custom Polished Finish Hinges Manufactured Using 6061-T6 Aluminum Sealed Bearings For Maximum Smoothness And Longevity Integral Stainless Steel Gas Struts Stainless Steel Mounting Hardware Included Learn More
$624.99 pr.
Tilt Hood Kit, Automatic With Remotes, Universal Part # 88-1342
High Strength Black Finish Industrial Steel Construction Adjustable Hood Hinge Detailed Instructions Limited Lifetime Warranty Professional Installation Recommended Power Automatic With Remote Option Tilt your hood the right way with a push of a remote! This power Tilt Hood Kit gives you the same custom look of many of world's top performance vehicles. This kit makes it easy to reverse the tilt on your hood! Not only does it give you a custom look, it also allows for easy access and maximum visibility, so everyone can see what your rocking under the hood! Learn More
$1,098.99 Kit
Power Portal Hood "Wing Vents" Chrome Upper Chrome Lower With Rectangular Chrome Mesh Part # 88-3224
Fits All Makes & Models (Universal Fit) Fits Fiberglass, Steel, Aluminum, Or Carbon Fiber Hoods Sets Car Apart From Others D.I.Y. Installation With Basic Hand Tools No Body Shop Visit Or Paint Work Needed Before Or After Installation Trim Is Chrome Plated Or Powder Coated To Last Besides looking awesome in chrome or black powder coat frames with contrasting or matching stainless steel and black mesh screens, these Wing Vents move a lot of hot air out of the engine bay. Wing Vents give a great stand-alone look. And they are a great compliment to the Power Portal Hood Window. NOTE: Some cars have extensive under hood ribbing for ?air slap? (Fiberglass and Carbon Fiber hoods tend to require a very little.) Check your car prior to purchasing our Wing Vents for fit and location. Learn More

Was: $309.99 pr.

Now: $189.99 pr.
Camaro Hood Lock Catch Support, Right, 1974-1981 Part # 33-12459
Restoration Correct Stamped Steel EDP Coated Supports Hood Catch From Passenger Side On All 1974-1981 Models Included Threaded Nut Inserts 1974-1981 Camaro is a growing platform in the restoration world. Ricks Camaros offers this quality replacement Hood Lock Catch Support, Right for your project. Made from stamped steel, with EDP coating for a rust free finish. This hood catch support the catch from the passenger side and is correct for all 1974-1981 models. This support includes threaded nut inserts as original, for ease of installation. Don't settle for just any replacement part on your 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981 Camaro, use only the best parts. Trust Ricks Camaros for all your parts needs. Learn More
$54.99 ea.
Camaro Billet Aluminum Hood Hinges, Black Powder Coated Finish, 1970-1981 Part # 754083-B
High Quality Custom Hinges Maintenance Free Black Powder Coated Finish Manufactured Using 6061-T6 Aluminum Sealed Bearings For Maximum Smoothness And Longevity Integral Stainless Steel Gas Struts Stainless Steel Mounting Hardware Included Learn More
$674.99 pr.
Power Portal Hood "Wing Vents" Chrome Upper Chrome Lower With Trapezoid Chrome Mesh Part # 88-3225
Fits All Makes & Models (Universal Fit) Fits Fiberglass, Steel, Aluminum, Or Carbon Fiber Hoods Sets Car Apart From Others D.I.Y. Installation With Basic Hand Tools No Body Shop Visit Or Paint Work Needed Before Or After Installation Trim Is Chrome Plated Or Powder Coated To Last Besides looking awesome in chrome or black powder coat frames with contrasting or matching stainless steel and black mesh screens, these Wing Vents move a lot of hot air out of the engine bay. Wing Vents give a great stand-alone look. And they are a great compliment to the Power Portal Hood Window. NOTE: Some cars have extensive under hood ribbing for ?air slap? (Fiberglass and Carbon Fiber hoods tend to require a very little.) Check your car prior to purchasing our Wing Vents for fit and location. Learn More

Was: $309.99 pr.

Now: $189.99 pr.
Tilt Hood Kit, Automatic, Universal Part # 88-1341
High Strength Black Finish Industrial Steel Construction Adjustable Hood Hinge Detailed Instructions Limited Lifetime Warranty Professional Installation Recommended Power Automatic Tilt your hood the right way with a push of a button! This power Tilt Hood Kit gives you the same custom look of many of world's top performance vehicles. This kit makes it easy to reverse the tilt on your hood! Not only does it give you a custom look, it also allows for easy access and maximum visibility, so everyone can see what your rocking under the hood! Learn More
$789.99 Kit
Power Portal Hood "Wing Vents" Black Upper Black Lower With Rectangular Powder Coated Black Mesh Part # 88-3223
Fits All Makes & Models (Universal Fit) Fits Fiberglass, Steel, Aluminum, Or Carbon Fiber Hoods Sets Car Apart From Others D.I.Y. Installation With Basic Hand Tools No Body Shop Visit Or Paint Work Needed Before Or After Installation Trim Is Chrome Plated Or Powder Coated To Last Besides looking awesome in chrome or black powder coat frames with contrasting or matching stainless steel and black mesh screens, these Wing Vents move a lot of hot air out of the engine bay. Wing Vents give a great stand-alone look. And they are a great compliment to the Power Portal Hood Window. NOTE: Some cars have extensive under hood ribbing for ?air slap? (Fiberglass and Carbon Fiber hoods tend to require a very little.) Check your car prior to purchasing our Wing Vents for fit and location. Learn More

Was: $269.99 pr.

Now: $189.99 pr.
Camaro Upper Door Hinge Bolt Set, 1968-1981 Part # 33-12748
Reproduction of Original Secures Upper Door Hinges 14 Bolt Set The hood hinges on your 1968-1981 Camaro are important for the proper use of your doors. Over time, these hinges can become rusted or loose from fault or missing mounting bolts. If this problem goes on unrecognized, it could prove a serious problem for your door and safety. When replacing your hinges, getting a new reliable set of hinge mounting bolts is essential. Ricks Camaros is proud to bring you a set of restoration correct door hinge mounting bolts to take out of the box and mount right to your doors hinges! This set of 14 black bolts will cover your door hinge installation and fit great on your door. From show cars, racers, street rods, and daily drivers, you can trust Ricks Camaros for all of your restoration and replacement needs for your 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980 and 1981 Camaro. Learn More
$16.99 Set

New!

Camaro Windshield Washer Pump, For Cars With Hidden Wipers, 1979-1983 Part # 33-12146
Replacement Washer Pump Fits 1979-1983 Cars With Hidden Wipers Only This 1979-1983 Camaro replacement windshield washer pump part is manufactured to ensure proper functionality for your car. Many of windshield washer pumps can malfunction overtime, so buy one today from Rick's Camaros to ensure your windshield stays clean. Using replacement parts from Rick's Camaros, such as this windshield washer pump, will bring quality to the restoration or repair of your 1979, 1980, 1981, 1982 & 1983 Camaro. Learn More
$39.99 ea.
Camaro Lower Door Hinge Bolt Set 1968-1981 Part # 33-12749
Reproduction of Original Secures Upper Door Hinges 16 Bolt Set The hood hinges on your 1968-1981 Camaro are important for the proper use of your doors. Over time, these hinges can become rusted or loose from fault or missing mounting bolts. If this problem goes on unrecognized, it could prove a serious problem for your door and safety. When replacing your hinges, getting a new reliable set of hinge mounting bolts is essential. Ricks Camaros is proud to bring you a set of restoration correct door hinge mounting bolts to take out of the box and mount right to your doors hinges! This set of 16 black bolts will cover your door hinge installation and fit great on your door. From show cars, racers, street rods, and daily drivers, you can trust Ricks Camaros for all of your restoration and replacement needs for your 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980 and 1981 Camaro. Learn More
$14.99 Set

New!

Camaro Hood Lock Catch Support, Left, 1978-1981 Part # 33-12460
Restoration Correct Stamped Steel EDP Coated Supports Hood Catch From Drivers Side On All 1978-1981 Models Included Threaded Nut Inserts 1978-1981 Camaro is a growing platform in the restoration world. Ricks Camaros offers this quality replacement Hood Lock Catch Support, Right for your project. Made from stamped steel, with EDP coating for a rust free finish. This hood catch support the catch from the passenger side and is correct for all 1978-1981 models. This support includes threaded nut inserts as original, for ease of installation. Don't settle for just any replacement part on your 1978, 1979, 1980, 1981 Camaro, use only the best parts. Trust Ricks Camaros for all your parts needs. Learn More
$49.99 ea.
Camaro Billet Aluminum Hood Hinges, Clear Powder Coated Finish, 1970-1981 Part # 754083
High Quality Custom Hinges Shiny Clear Powder Coated Finish Means No Need To Ever Polish Manufactured Using 6061-T6 Aluminum Sealed Bearings For Maximum Smoothness And Longevity Integral Stainless Steel Gas Struts Stainless Steel Mounting Hardware Included Learn More
$674.99 pr.
Camaro Billet Aluminum Hood Hinges, Machined Finish, 1970-1981 Part # 754079
High Quality Custom Machined Finish Hinges Manufactured Using 6061-T6 Aluminum Sealed Bearings For Maximum Smoothness And Longevity Integral Stainless Steel Gas Struts Stainless Steel Mounting Hardware Included Learn More

Was: $609.99 pr.

Now: $549.99 pr.
Power Portal Hood "Wing Vents" Chrome Upper Black Lower With Rectangular Chrome Mesh Part # 88-3208
Fits All Makes & Models (Universal Fit) Fits Fiberglass, Steel, Aluminum, Or Carbon Fiber Hoods Sets Car Apart From Others D.I.Y. Installation With Basic Hand Tools No Body Shop Visit Or Paint Work Needed Before Or After Installation Trim Is Chrome Plated Or Powder Coated To Last Besides looking awesome in chrome or black powder coat frames with contrasting or matching stainless steel and black mesh screens, these Wing Vents move a lot of hot air out of the engine bay. Wing Vents give a great stand-alone look. And they are a great compliment to the Power Portal Hood Window. NOTE: Some cars have extensive under hood ribbing for ?air slap? (Fiberglass and Carbon Fiber hoods tend to require a very little.) Check your car prior to purchasing our Wing Vents for fit and location. Learn More

Was: $289.99 pr.

Now: $189.99 pr.
Camaro Windshield Glass Support, 1970-1981 Part # 33-12899
Restoration Correct Positions And Supports Glass During Installation Made From Stamped-Galvanized Steel Correct Rubber Coated Foot Installation Screw Included Sold Individually NOTE: Two Required Per Car 1970-1981 Camaro is gaining in popularity with the car show and street scene crowd. Ricks Camaros offers this quality Windshield Glass Support, for your windshield installation project. This windshield glass support is used to support the glass during installation. It is made from durable stamped-galvanized steel, with the correct durable rubber foot and installation screw. Two are required for glass installation. Do not settle for just any part for your 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981 Camaro restoration project, use only the best replacement parts. Trust Ricks Camaros for all your part needs. Learn More
$12.99 ea.

New!

26 Item(s) Sort by: Show: per page Grid  |  List
1