Product Experts Available 1-800-359-7717

1984 CAMARO STANDARD SUSPENSION AND CHASSIS

Search Term: 'All Parts'
Category: 'Suspension and Chassis'
Vehicle: '1984 CHEVY CAMARO STANDARD'
Items: 1 to 28 of 64 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. 3
  4. Next
Grid  |  List
Best Sellers
Camaro Sway Bar End Link Set, Front, 1970-2002 Part # 721212
Reproduction Of Original 2 Required Per Car This Camaro reproduction sway bar end link set has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit and function will work superbly for your restoration. In addition, using a reproduction sway bar end link set from Eckler's will add authenticity and value to your Camaro. Learn More
$11.99 Set
Camaro Control Arm Bumper, Lower Front, 1970-1987 Part # 721195
Replacement Control Arm Bumper 2 Required Per Car Not Technically Correct, Will Function As A Replacement    This Camaro replacement lower control arm bumper has been manufactured to meet or exceed factory specifications and performance. You will find the fit; finish and function will work perfectly for your Camaro. You will also be pleased to know that Rick's has sourced this lower control arm bumper among other possible parts as the best choice for your repair or restoration project.   Learn More
$11.99 ea.
Camaro Rear Sway Bar End Link Kit, 1982-2002 Part # UR-903
Replacement Polyurethane Sway Bar End Links Fits Front 1967-02 And Rear 1982-02 Outlasts Original Rubber Bushings Decreases Suspension Deflection, Which Helps Rear Traction And Safe Cornering Your Choice Of Black Or Red Made In USA Lifetime Manufacturer’s Warranty Historically, the Camaro was really happy when going in a straight line. However, the SCCA/Trans-am Series guys really had to tweak the suspension to make the Camaro carve the corners. Times have changed! Rick’s offers these polyurethane anti-sway bar end links to help your Camaro really handle. Don’t feel like you are driving a boat down the road! Replace both of your rear end links with this kit from Rick’s today and tighten up your suspension. Learn More
$24.99 Kit
Camaro Tie Rod End Dust Boots, Polyurethane, 1967-2002 Part # UR-12
Replacement Dust Boots Outlasts Original Rubber Boots Your Choice Of Black Or Red Made In USA Lifetime Manufacturer’s Warranty Polyurethane replacement dust boots for the tie rod ends on your Camaro. These strong, polyurethane boots resist damage from sand, road salt and oils. The five-point sealing action prevents contamination and loss of tie rod end grease. Practice a little preventive mainenance by replacing your original rubber boots while you are replacing your tie rod ends or replace your old, cracked original boots today with these quality polyurethane tie rod end dust boots from Ricks today. Learn More
$4.99 pr.
Camaro Strut, Front, GR-2, KYB, 1982-1992 Part # 721006
Excellent Replacement Strut Great Performance Great Price The KYB GR-2 line of struts is one of the best replacement suspension components available. They feature the same twin tube design as the original equipment, but with heavier duty internal parts. The valving and pressures are more closely matched to the high performance suspension of your Camaro than any other replacement strut on the market. Learn More
$64.99 ea.
Camaro Lower Ball Joint, 1970-2002 Part # 721442
Highest Quality Lower Ball Joint Available Hardware Included 2 Required Per Car   The lower ball joint in your 1970-2002 Camaro is used to connect the control arms to the steering knuckles, enable movement while steering your vehicle.  When these lower ball joints start to fail, you may hear a clicking or snapping sound when the wheel is turned, which can eventually turn into a squeaking sound at the end of a stop, when the gas pedal is used, and when hitting bumps. Eventually, driving in your Camaro can become more dangerous, as the wheel’s angle becomes unconstrained, causing loss of control. Don’t let your lower ball joints get to this point, and get a replacement ball joint from Rick’s Camaros today! These lower ball joints match factory specifications and will exactly replace your original ball joints, creating a cleaner and smoother driving experience in your Camaro. Using some of the highest quality materials available, and including all hardware for installation, you’d be crazy not to jump on this deal. Trust Rick’s Camaros for all of your replacement and restoration needs for your 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,  2000, 2001, or 2002  Camaro! Learn More

Was: $23.99 ea.

Now: $19.99 ea.
Camaro Sway Bar End Link Set With Red Bushings, Front, 1970-2002 Part # 33-10420
High Quality Red Rubber Bushings 2 Required Now you can replace your original worn out black sway bar link bushings with this high quality racing red rubber bushing kit from Rick's Camaro. Learn More
$11.99 Kit
Camaro Shock Absorber, Rear, Gas, GR-2, KYB, 1982-2002 Part # 721009
Excellent Replacement Shock Great Performance Great Price The KYB GR-2 line of shocks is one of the best replacement suspension components available. They feature the same twin tube design as the original equipment, but with heavier duty internal parts. The valving and pressures are more closely matched to the high performance suspension of your Camaro than any other replacement shock on the market. Learn More
$32.99 ea.
Camaro Coil Springs, Rear, Heavy Duty, 1982-2002 Part # 791093
104 Lbs. Progressive Rate Great Dual Purpose Spring For Cruising And Corner Carving Best Spring For Adjustable Rear Shocks Best Used With Front Springs P/N 791092 These replacement heavy duty rear springs are the strongest available. The original rear 1LE springs were fixed single rate and would knock your fillings loose. These are a progressive two stage cargo coil. A progressive rear spring will allow the rear to rotate and dig in for launch but still have enough firmness to kill any wheel hop or deal with changing pavement. Learn More
$79.99 pr.
Camaro Shock Absorber, Rear, Gas, Mono Tube, KYB, 1982-2002 Part # 721015
Excellent Upgrade Shock Great Performance Great Price The KYB GAS-A-JUST mono tube shock is a great performance upgrade and is one of the most responsive mono tube dampers on the market. The primary advantage of a mono tube design over the original equipment twin tube is in consistency. The high pressure design eliminates the cavitations inherent to low pressure replacement shocks. They will not fade no matter how hard they are worked. KYB GAS-A-JUST shocks are backed by a limited lifetime warranty. This means you get the same great ride and efficiency- now and forever. KYB is an excellent selection for Camaro owners who demand life-long service out of a performance shock. Learn More
$49.99 ea.
Camaro Upper Strut Mount, Right, 1982-1992 Part # 721007
Highest Quality Replacement Strut Mount Available GM used two different mounting bolt patterns on the strut mount retainers for the 1982-1992 F-Body Camaro and Firebird. 1982-1986 cars have one type, 1987-1992 cars have another type. All replacement strut mounts are machined to the 1987-1992 style mounting pattern. Learn More

Was: $74.99 ea.

Now: $49.99 ea.
Camaro Sway Bar Bushing, Front, 28mm, 1978-1986 Part # 721230
Replacement Sway Bar Bushing For Cars Without Locking Tabs On The Frame Mounting Brackets Fits All Factory 28mm Sway Bars This Camaro replacement sway bar bushing has been manufactured to meet or exceed factory specifications and performance. You will find the fit and function will work perfectly for your Camaro. You will also be pleased to know that Eckler's has sourced this sway bar bushing among other possible parts as the best choice for your repair or restoration project. Learn More
$13.99 ea.
Camaro Upper Strut Mount, Left, 1982-1992 Part # 721008
Highest Quality Replacement Strut Mount Available GM used two different mounting bolt patterns on the strut mount retainers for the 1982-1992 F-Body Camaro and Firebird. 1982-1986 cars have one type, 1987-1992 cars have another type. All replacement strut mounts are machined to the 1987-1992 style mounting pattern. Learn More

Was: $74.99 ea.

Now: $49.99 ea.
Camaro Steering Box Brace, 1982-1992 Part # 721840
Constructed of 1.25" x .120" DOM Tubing Powdercoated Red Easy Installation, Bolts Between Sway Bar Frame Mounts And Frame Rails This brace is designed to stiffen the front sub-frame and reinforce the steering box mount. It was factory equipemnt on a few rare Iroc-Z and 1LE cars. This area is well known to be problematic on the third generation F cars. The tubular steering brace will not only provide for firmer steering response, but it will prevent the sub-frame stress cracking problem caused by the flex of the steering box. That's why the "Wonder Bar" is considered a must do upgrade on any third generation F-Body. Constructed of 1.25" x .120" dom tubing and laser cut 3/16" mounting brackets. Our laser cut mounting brackets are designed to work with OEM front sway bar bushings with the locator tabs and bushing to frame inserts, they will also work with the universal style aftermarket polyurethane bushings. Learn More
$63.99 ea.
Camaro Coil Spring Isolator, Rear, 1982-2002 Part # 33-12152
Restoration Correct 2 Required Per Car Made From Quality Material For All Models 1982-2002 Camaro are great for carving up the roads. With this increased driving aggression comes additional worn parts. Ricks Camaros offers this Coil Spring Isolator for the rear springs. The coil spring isolator is used to prevent noise from being transmitted from the coil spring to the chasis while driving. As you drive the coil spring will twist side to side, as a coil spring is just a torsion bar that has been made into a coil. As the coil moves in the coil pocket it will become noisy, the using the coil spring isolator in you 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 Camaro will make for a nicer and more comfortable ride. Trust Ricks Camaros for all your parts needs. Learn More
$9.99 ea.
Camaro Sway Bar Bushings, Front, 29mm, 1976-1986 Part # 721519
Replacement Sway Bar Bushings For Cars Without Locking Tabs On The Frame Mounting Brackets Fits All Factory 29mm Sway Bars These Camaro replacement sway bar bushings have been manufactured to meet or exceed factory specifications and performance. You will find the fit and function will work perfectly for your Camaro. You will also be pleased to know that Eckler's has sourced these sway bar bushings among other possible parts as the best choice for your repair or restoration project. Learn More
$13.99 pr.
Camaro Rear Lower Tubular Control Arms, 1982-2002 Part # 721601
Greatly Reduce Rear Axle Flex Improves Traction By Decreasing Wheel Hop Bolt-On Installation These Granatelli Motor Sports control arms feature 1.65" x .120 wall tubing for superior strength, polyurethane bushings and grease fittings on both ends of the bar and powder coated. Learn More

Was: $197.99 Kit

Now: $159.99 Kit
Camaro Suspension Bushing Kit, Polyurethane, 1982-1992 Part # 721137
Dramatically Improves Handling & Reduces Rear Wheel Hop Talk about bang for the buck! With this Camaro Suspension Bushing Kit you replace all the weak link rubber mounts and bushings and upgrade to polyurethane. The end result is a suspension system that will make your Camaro perform better than it did off the showroom floor! This kit includes front and rear control arm bushings, sway bar end link bushings, tie rod boots, ball joint boots, transmission mount, rear coil spring pads, torque arm and panhard rod bushings. Learn More
$269.99 Kit
Camaro Coil Springs, Front, Heavy-Duty, 1982-1992 Part # 791092
700 Lbs. Single Rate- Non Progressive Used In Showroom Stock Racing Very Firm & Aggressive Ride Use With Rear Springs P/N 791093 These replacement 1LE style front springs are the strongest available. They will restore your car to its factory height and are great for road racing and track days. Learn More
$93.99 pr.
Camaro K-member Braces, 1982-1992 Part # 721839
3/16" Steel Grade 8 Bolts Included Not all cars were factory equipped with triangular braces on each side of the front of the k-member to reinforce the front subframe at the steering box mount. These braces reduce flex and cracking of the front subframe and are a recommended addition for any street driven car. Our braces are CNC cut and formed from 3/16" steel and finished in a durable and brilliant powder coat. They will mount to any factory k-member, or to a Spohn tubular k-member equipped with front brace mounts. We also include (6) new grade 10.9 flanged head mounting bolts, everything you need for a quality installation. Braces feature a gloss black powder coated finish. Learn More
$77.99 pr.
ADDCO 1982-2002 Camaro Rear Sway Bar Kit, 1" Diameter Part # 721124
Provides Dramatic Handling Improvement By Reducing Body Roll & Chassis Flex   Includes Polyurethane Sway Bar Bushings To Provide Minimal Friction & Quick, Smooth Responsiveness   End Link Bushings Are Polyurethane For Long Life   Easy To Install   Hardware Included   Learn More
$199.99 Kit
Camaro Panhard Bar, Adjustable, With Polyurethane Bushing, Spohn, 1982-2002 Part # 721771
Stronger, Yet Lighter Then Stock Polyurethane Bushings (Fluted) With Grease Fittings For Easy Lubrication Right Hand & Left Hand Threaded CNC Machined Double Male Stud Adjuster Threads Into 4130 Chrome Moly TIG Welded Threaded Tube Adapters 1.25" x .095" Wall Mild Steel Tubing This Is The Highest Quality, Easiest To Adjust On The Car Panhard Bar On The Market Replace the factory's weak, stamped steel, flexible panhard bar with one of our heavy duty set-ups! Allows for centering the rearend after lowering. The best component for serious handling performance. Allows alignment of the rear for clearance when running larger tires. Greatly increases rear's lateral stability. Learn More
$169.99 ea.
Camaro Control Arm Bushing, Lower, Front, 1982-1992 Part # 721437
Replacement Bushings 2 Pair Per Car   These Camaro replacement lower control arm bushings have been manufactured to meet or exceed factory specifications and performance. You will find the fit and function will work perfectly for your Camaro. You will also be pleased to know that Rick's has sourced these lower control arm bushings among other possible parts as the best choice for your repair or restoration project.   Learn More
$24.99 pr.
Camaro Sway Bar Bushing Kit, 34mm, Urethane, 1982-1992 Part # 721232
Optimizes Full Benefit Of Stock Sway Bars Provides Instantaneous Sway Bar Repsonse Outlasts Factory Rubber Bushings The sway bar (anti-roll bar) on any car is one of the most important elements in providing great handling. By reducing body roll, you improve the tires contact to the pavement for improved handling. To maximize your factory sway bars performance, upgrading to polyurethane bushings greatly reduces bushing distortion and binding found in rubber bushings. These features reduce body roll and increase steering responsiveness to steering commands for a crisper, better handling car. To further improve your Camaro's handling, up-sizing of your sway bars will further reduce body roll, improved steering crispness and improve handling. Learn More
$11.99 Kit
Camaro Cargo Coil Springs, Rear, 1982-1992 Part # 721172
Replacement Springs Provides Extra Load Carrying Capability Over Stock Springs Retains Factory Ride Height Learn More
$87.99 pr.
Camaro Adjustable Torque Arm, Standard Duty, 1982-2002 Part # 721494
Attaches To The Rear Axle & Controls Rear End Torque During Acceleration, Transferring This Energy Into The Tires, Increasing Straight Line Traction Reduces Nose-Dive During Braking Eliminates Wheelhop Increases Sidebite During Corner Exit Acceleration Bolt-On System Does Not Require Complete Interior Removal As With Other Kits Provides Adjustable Pinion Angle FREE Angle Finder Included To Set Pinion Angle Constructed Of 1.25" o.d. x .120" Wall DOM Tubing Front "Stub" Of Torque Arm Is Reinforced By TIG Welding A Piece Of 1" Solid 4140 Chrome Moly Into The i.d. Of The Front Snub TIG Wwelded 4130N Chrome Moly Threaded Tube Adapters Heavy-Duty CNC Laser-Cut 3/8" Steel Rear Housing Mounting Bracket Polyurethane Bushing Front Mount For Minimal Road Noise Rear Of The Torque Arm Mounts To The 3/8" Steel Rear Housing Mounting Bracket Via Two 3/4"-16 NFT x 5/8" Bore x 7/8" Thick Solid Steel Rod Ends-These Are Solid Rod Ends, Not Spherical Bearing Rod Ends, So Noise Is Of No Concern. Grade 8 - 5/8" Bolts & 5/8" Nylock Nuts Are Used Integral 4140 Chrome Moly Pinion Angle Adjuster Between The Bottom Rear Solid Rod End & The Bottom Rear Torque Arm Tube Allows For Easy Pinion Angle Adjustment-A Simple Turn Of The Wrench Will Give You 6 Degrees Of Pinion Angle Adjustment, It's That Simple Entire Package Is A Complete Bolt-In Assembly Using Existing Mounting Points On The Vehicle-No Drilling Or Welding Is Required This Is A Proven Product Being Run On Some Of The Fastest F-Bodies In The Country Rear Mounting Bracket Is Designed To Fit On OEM & /Or Aftermarket Rear Ends Replace your flimsy factory torque arm with a durable Spohn tubular version and put the power where it belongs - the pavement! Built from 1.25" x .120" DOM tubing with a heavy-duty 3/8" thick rear mounting bracket. Bolts directly in place of the factory torque arm using all factory mounting locations. Requires no welding or drilling. Equipped with an adjuster for changing pinion angle and a new, low deflection polyurethane front bushing. 1982-1992 cars require the use of a factory torque arm bushing clamshell mount designed for Prothane bushing 7-1609. If your vehicle is equipped with a 7-1611 type bushing, you will need to get the 7-1609 type clamshell (See above pictures). This does not apply to 1993-2002 cars. Learn More
$409.99 ea.
Camaro Torque Arm, Spohn, Heavy Duty, With Crossmember & Front Driveshaft Loop, 1982-1992 Part # 721735
Attaches To The Rear Axle & Controls Rear End Torque During Acceleration, Transferring This Energy Into The Tires, Increasing Straight Line Traction Reduces Nose-Dive During Braking Eliminates Wheelhop Increases Sidebite During Corner Exit Acceleration No Fabrication, Welding Or Drilling Required - 100% Bolt-In Installation Removes The Torque Arm Pivot Point From The Transmission Tail Shaft To The Supplied Transmission Crossmember Changes The Instantaneous Center & Leverage Point From Stock Provides Adjustable Pinion Angle FREE Angle Finder Included To Set Pinion Angle Constructed Of 1.25" o.d. x .120" Wall DOM Tubing TIG Welded 4130N Chrome Moly Threaded Tube Adapters Extreme-Duty CNC Laser-Cut 3/8" Steel Rear Housing Mounting Bracket Heavy-Duty Fabricated Steel Transmission Crossmember With Integral Torque Arm Mounting System Polyurethane Bushing Front Mount Version For Minimal Road Noise. Integral Grease Fitting Allows For Lubrication Of The Polyurethane Bushing Rod Ended Front Mount Version Utilizes An Extra High Strength Chrome Moly Spherical Rod End With Teflon® Self-Lubricating Race For Those Who Demand No Bushing Deflection & The Best In Bind-Free Performance & Strength Del-Sphere Front Mount Version Utilizes An Extra High Strength Chrome Moly Del-Sphere Pivot Joint For Those Who Demand No Bushing Deflection & The Best In Street-Friendly Bind-Free Performance & Strength Rear Of Torque Arm Mounts ToThe 3/8" Steel Rear Housing Mounting Bracket Via Two 3/4"-16 NFT x 5/8" Bore x 7/8" Thick Solid Rod Ends. All Grade 8 Hardware Is Supplied Integral 4140 Chrome Moly Pinion Angle Adjuster Between The Bottom Rear Rod End & The Bottom Rear Torque Arm Tube Allows For Easy Pinion Angle Adjustment-A Simple Turn Of The Wrench Will Give You Over 6 Degrees Of Pinion Angle Adjustment, It's That Simple This Is A Proven Product Being Run On Some Of The Fastest F-Bodies In The Country Rear Mounting Bracket Is Designed To Fit On Stock & /Or Aftermarket Rear Ends Learn More
$469.99 ea.
Camaro Coil Springs, V8, Sportline, Eibach, 1982-1992 Part # 721961
Provides Excellent Handling And Control Will Lower Vehicle Approximately 1.8 Inches Provides A Firm Stable Base For Aggressive Street Or Road Course Driving Fits All 1982-1992 V8 Cars If you want your car to look great, lower it and remove that hideous wheel to fender gap. Eibach has engineered the perfect spring set to lower your car 1.5 to 2 inches at all four corners. NOTE: Lowering your car changes the rear control arm angles. Please consider our lower control arm relocation brackets, and an adjustable torque arm. Learn More
$289.99 Set
Items: 1 to 28 of 64 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. 3
  4. Next
Grid  |  List
4