Product Experts Available 1-800-359-7717

Filter Your Results

  1. Remove This Item CATEGORY: Engine Thermostats and Housings
  1. Thermostat Housings (3)
  2. Thermostats (3)
  1. Performance Stainless Steel (1)
  2. Stewart Warner (1)
  1. $5.00 to $9.99 (1)
  2. $12.50 to $14.99 (1)
  3. $15.00 to $19.99 (1)
  4. $25.00 to $29.99 (2)
  5. $125.00 to $149.99 (1)
1985 Camaro Parts For Sale - 85 Chevy Camaro Parts


Search Term: 'All Parts'
Category: 'Engine Thermostats and Housings'
Vehicle: '1985 CHEVY CAMARO'

Rick’s Camaros is your one-stop shop for 1985 Camaro parts. The 1985 Camaro was a Third Generation F-Body Camaro, spanning from years 1982-1992. 1985 included the Sport Coupe, Z28 Sport Coupe, IROC-Z Coupe, and Berlinetta. While the appearance of 1985 models was similar to the previous year, grilles, parking lamps, front fasciae, tail lamps, and air dams were all new. Interior trim and colors were revised for 1985, and ten of twelve exterior colors were changed from the previous year. A split folding rear seat became optional for all models. 1985 also saw the debut of a new IROC Sport Equipment Package, which featured lower trim height and center of gravity, special front struts, springs and jounce bumpers, Delco-Bilstein rear shocks, special rear springs and stabilizer bar, higher-effort steering, increased caster, front frame rail reinforcement, and more. While not a separate model, the IROC was an available option with Z28 models. A five-speed manual transmission became standard on all models, and dual air pickup air cleaners became standard on all engines except base 4-cylinder and the LG4 V8. While undergoing slight changes in the previous year, the Z28’s ride quality was softened significantly in 1985. In addition to carrying 3rd Generation 1985 Camaro parts, Rick’s Camaros has parts for all Camaro models available. We have all the parts and accessories you need to help restore your Generation Three 1985 Camaro, at the best prices! Trust Ricks for all of your restoration and replacement needs for your racer, show car, street rod, or daily driver.

6 Item(s) Sort by: Show: per page Grid  |  List

Was: $12.99 ea.

Now: $9.99 ea.
$12.99 ea.
Camaro Thermostat, 180°, Hi-Flow, Robertshaw, 1967-1992 Part # EP-461
Reproduction Of Original Allows Increased Coolant Flow With Stewart Water Pump Maintains Optimum 180ºF Engine Coolant Temperature With extreme temperatures, comes extreme thermostat performance for your 1967-1992 Camaro, and thermostats have to be replaced often because of their required overuse at times. This Camaro thermostat with Steward hi-flow water pump is used to accomodate the increased coolant flow rate in your Camaro. The 180º F setting keeps your engine at its optimum heat range for maximum power output. Rick's Camaros is happy to offer this reproduction Stewart 180º F thermostat, matching factory specifications and replacing your original thermostat, but with more power. Maintaining an optimum 180º F engine coolant temperature, you can be sure that you will be feeling comfortable in your Camaro during extreme temperature conditions outside. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, or 1992 Camaro! Stewart hi-flow water pumps on stock engines require this thermostat that has been modified by Stewart to accommodate the increased coolant flow rate. The 180ºF setting keeps the engine at its optimum heat range for maximum power output. Learn More
$29.99 ea.
Camaro Chrome Thermostat Housing, 15º, Swivel, 1967-1986 Part # 718721
    Looking the make a splash under the hood of your 1967-1986 Camaro? Ricks Camaros offers this Chrome Thermostat Housing, that offers a very versicle 15 degree swivel neck. Don't continue to use that old painted housing, bring some life to your 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986 Camaros engine. Trust Ricks Camaros for all your parts needs.   Did you know? Many people in our hobby refer to the thermostat housing as a water neck. Swivels To Allow Use Of Non-Stock Radiator Hoses Or To Provide For Better Clearance Chrome Finish O-Ring Included 1-1/2" Water Neck        Learn More
$26.99 ea.
Camaro Thermostat Housing, 305 c.i. (5.0), For Motors With H, G, S or 7 As 8th Digit Vin, 1980-1987 Part # 718390
8th Digit Identifies The Engine And Transmission Combination Of Your Car Fits 1982-1987 5.0 (305) 4BBL "H" Motors Fits 1984-1986 5.0 (305) 4BBL "G" Motors Fits 1983 5.0 (305) Fuel Injected "S" Motors Fits 1983 5.0 (305) Carbureted "7" Motors 2 Port Housing For Coolant Temp Sensor And EFE (Early Fuel Evaporation) Access Corrosion And Rust Inhibitor Coated Heavy Cast OE Style Construction Includes Quality Gasket To Ensure Proper Seal Quality Machined Thread Parts   Your 1982, 1983, 1984, 1985, 1986, 1987 Camaro thermostat housing has a very important job in your engines coolant cycle. This Camaro thermostat housing is home to where your thermostat lives and aids in its restriction of the coolant flow back to the radiator. Hence the name “housing”, over time these steel, aluminum or chrome housing can corrode due to rust or electrolysis or simply warp during the heat and cooling cycle. Camaro thermostat housing can leak at the gasket, hose, clamps or fasteners. Other times, the thermostat housing just get rough or rusty and just wouldn’t do at the next show n’ shine or drive in. Ricks Camaros sources its 1982, 1983, 1984, 1985, 1986, 1987 F-Body Chevy thermostat housing from the world’s top manufactures to insure many miles of cruising pleasure. Whether your 1982, 1983, 1984, 1985, 1986, 1987 Camaro is a Standard Model,  Berlinetta, or Z28, we can get you the right part at the right price. Trust the Ricks Camaros for all your daily driver, race or show car needs. We got it!   Note: Fits 305H Federal Motor Option Code (LG4) Learn More
$15.99 ea.
Camaro Thermostat Housing, Stainless Steel, Natural, Small Block/Big Block, 1970-1992 Part # 718800
Ultra Low Profile Design For Ram Jet & Blower Applications Made From 304 Stainless Steel 360 Degree Swivel Allows Better Positioning Of Radiator Hose Double O-Ring Seal Includes Stainless Mounting Hardware Having clearance issues with your new small or big block Chevy Ram Jet motor? Eckler's Camaro Parts is proud to announce the introduction of a new Stainless Steel 15 Degree Neck Angle Swivel Thermostat Housing. This Camaro Thermostat Housing is available in natural finish and is designed with a double o-ring to prevent leaks. The Camaro Stainless Steel Thermostat Housing features a 360 degree swivel to allow you to position your hose to the location of your choice. The Stainless Steel Thermostat Housing solves clearance issues as well as rust, corrosion and discoloration problems. Learn More
$139.99 ea.
6 Item(s) Sort by: Show: per page Grid  |  List