Product Experts Available 1-800-359-7717

Filter Your Results

  1. Remove This Item CATEGORY: Exterior Parts and Trim
  2. Remove This Item brand: Stinger Fiberglass
CATEGORIES
  1. Body Parts (9)
  2. Spoilers and Wings (1)
PRICE
  1. $250.00 to $299.99 (2)
  2. $400.00 to $499.99 (2)
  3. $500.00 to $599.99 (6)
 

STINGER FIBERGLASS PARTS & ACCESSORIES

Eckler's Hand Laminated or Press Molded Fiberglass Body Parts

Choose from Hand Laminated or Press Molded to repair your fiberglass to near original condition!

The hand laminating process begins with three mils of gel coat sprayed into a female mold to create a smooth outer surface. Next, resin is painted by hand onto the gel coat followed by the "layering in" of three layers of mat and resin. The mat and resin are carefully rolled out with a hand roller to eliminate air bubbles and to assure uniformity. This process allows the creation of unique parts like the one piece front end which is easier to install than the multi-piece units from the factory. This time honored system combined with the use of only automotive grade resins and gel coat produces a beautifully smooth, strong and easy to sand part.

Eckler's Press molded parts are made with a huge hydraulic press which holds large male and female steel tools (known as the molds). Fiberglass mat and resin is placed between the tools and is pressed together under extremely high pressure and heat. This process allows the production of high volumes of parts that are perfectly uniform in thickness and that are smooth on both sides. Press molded parts do not have a gel coat finish though. Parts can also be manufactured using low pressure press molding. This method takes a precisely cut fiberglass mat and places it into a two-piece closed mold. Resin is injected into the mold and allowed to cure. This method also produces a smooth surface on both sides of the part.

Rick’s Camaros is your one-stop shop for 1987 Camaro parts. The 1987 Camaro was a Third Generation F-Body Camaro, spanning from years 1982-1992. 1987 included the Sport Coupe, Type LT Coupe, Z28 Sport Coupe, IROC-Z Coupe, Z28 Convertible, Sport Convertible, and IROC-Z Convertible. For the first time since 1969, Camaro convertibles were made available again, but unlike the earlier models, these were built as RPO CC1 coupes, and then converted by ASC Incorporated. The new LT option, having replaced the Berlinetta, included sport mirrors, custom interior, accent striping, deluxe luggage compartment and locking storage, auxiliary lightning, soft-ride suspension, and full wheel covers. The IROC option package included special suspension, stowaway spare tire, blackwall tires, aluminum wheels, and halogen fog lamps. Chevrolet also increased its extended powertrain warranty protection for Camaros to six years or 60,000 miles. 1987 marked the 20th anniversary of the Camaro and the convertibles were considered the anniversary editions, signified by a special dash badge that read “20th Anniversary Commemorative Edition.” In addition to carrying 3rd Generation 1987 Camaro parts, Rick’s Camaros has parts for all Camaro models available. We have all the parts and accessories you need to help restore your Generation Three 1987 Camaro, at the best prices! Trust Ricks for all of your restoration and replacement needs for your racer, show car, street rod, or daily driver.

10 Item(s) Sort by: Show: per page Grid  |  List
10 Item(s) Sort by: Show: per page Grid  |  List
3