Product Experts Available 1-800-359-7717

1987 CAMARO STANDARD CHEVY EXHAUST

Search Term: 'All Parts'
Category: 'Exhaust'
Vehicle: '1987 CHEVY CAMARO STANDARD'

Items: 1 to 28 of 31 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. Next
Grid  |  List
Best Sellers
Camaro Exhaust Manifold Stud Set, Small Or Big Block, Steel, 1967-1992 Part # RC-153
Good Quality Reproduction Functional OEM Steel Studs Mild Steel Nuts Fits Big Blocks Or Small Blocks Does Both Sides   Learn More
$14.99 Set
Exhaust Wrap, Stainless Steel Locking Ties Part # 88-0174-1
Cut-To-Length Narrow To Fit In Tight Locations Easy Slide-Through Fasteners To secure your Exhaust Wrap use, Stainless Steel Locking Ties. For primary tubes use 9-inch, for collectors use 18-inch. The ties can be used anywhere there is extreme heat (up to 2500 F). Learn More
$34.99 Kit
Insulating Exhaust Wrap Part # 88-0173-1
Reduces Under-Hood Temperatures up to 70% Increases Horsepower & Fuel Efficiency Withstands Heat up to 2000 Degrees  The original Exhaust Insulating Wrap was developed over 12 years ago by Thermo-Tec. Exhaust Insulating Wrap is an innovative way to create more horsepower and reduce under-hood temperatures. Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust scavenging is produced, along with lower intake temperatures. Exhaust Insulating Wrap withstands continuous heat up to 2000°F, and contains no asbestos. Thermo-Tec exhaust wrap will not over-insulate a system when properly installed due to a proprietary coating developed by Thermo-Tec - Thermal Conduction Technology (TCT) - that conducts heat across the wrap's surface. This coating controls heat build-up and dissipation. Just wrap it around your exhaust pipe and secure with lock ties P/N 88-0174-1. Protect wrap with Hi-Heat Coating spray P/N 88-0175-1. Wrap roll is 50' x 2" & 1/16" thick, which is enough to cover one header or exhaust pipe.   Learn More
$51.99 rl.
Thermo-Tec Hi-Heat Exhaust Wrap Coating, Aluminum Part # 88-0175-1
Will Also Work On Metal Surfaces Seals Pores To Minimize Penetration Of Harmful Liquids 11 Oz. Spray Can Learn More
$12.99 ea.
Camaro Exhaust System, 3" Cat Back Adjustable, Borla, V8, 1984-1992 Part # 724021
Delivers Performance Sound Improves Exhaust Flow & Performance Bolt-On Installation Borla has always set the standard for great exhaust sound and improved performance. This system is made of aircraft quality T-304 stainless steel. T-304 is the highest quality and most resistant to corrosion. Like all Borla T-304 systems, it is backed by the only million mile warranty in the business. Learn More

Was: $879.99 Kit

Now: $799.99 Kit
Camaro Exhaust System, Dynomax, Super Turbo, 1982-1992 Part # 724601
Replacement Exhaust System From Converter Back 2-1/2" Mandrel Bent Aluminized Steel Tubing Super Turbo Muffler (Slightly Louder Than Original) No Interior Drone Or Resonance Will Not Fit Cars With Dual Catalytic Converters Learn More
$279.99 Set
Camaro Headers, Ceramic Coated, Small Block, Shorty, 1970-1992 Part # 731573
Compact Design Ceramic Coated 15 Degree Collector Angle (Driver Side) 5 Degree Collector Angle (Passenger Side) 1.5 Inch Primary Tube 2.5 Inch Collector Includes Header Bolts These headers are ceramic coated shorties with a swept back collector to fit the 1970-92 Chevrolet Camaro. Please compare the dimensions of the header and images for fit on your vehicle. Features a 15 degree collector angle on the driver side and a 5 degree angle on the passenger side, this header offers ample room around cross members and starters. Comes with all hardware necessary for installation. NOTE: Not for use on pollution-controlled vehicles. Learn More
$499.99 pr.
Hedman Hedders, Shorty Painted, Small Block, 1982-1992 Part # 724268
Shorty Style Header Adds Up To 10 Horsepower Increase 1/4" Flanges With 18 Gauge Tubing, 1-5/8" Diameter Tubes Standard Flange Style Painted Steel Finish Includes Header Bolts Hardware & Gaskets Without A.I.R., Small Block   Rick's Camaros is happy to offer new shorty style headers for your small block 1982-1992 Camaro. Manufactured by Hedman Hedders, these headers will give you better horsepower, fuel economy, and overall performance over any others. Through careful manufacturing, they are guaranteed to be free from defects, including cracks in the tubes and welds. Hedman Street Hedders are available in black painted or polished HTC thermal ceramic coating finishes and also come with all necessary gaskets and mounting hardware to help simplify your installation. With a shiny looking painted steel finish, these shorty headers are designed to match up and look great with the specific application of your F-Body Camaro. Trust Rick's Camaros for all of your restoration and replacement needs for your 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, or 1992 Camaro!     Learn More
$249.99 Set
Camaro Headers, Plain Steel Small Block, Shorty,1970-1992 Part # 731572
Compact Design Bare Steel No Paint Or Coating 15 Degree Collector Angle (Driver's Side) 5 Degree Collector Angle (Passenger's Side) 1.5 Inch Primary Tube 2.5 Inch Collector Includes Header Bolts These headers are shorties with a swept back collector to fit the 1970-1992 Camaro. Please compare the dimensions of the header and images for fit on your vehicle. Features a 15 degree collector angle on the driver side and a 5 degree angle on the passenger side, this header offers ample room around cross members and starters. Comes with all hardware necessary for installation. NOTE: Not for use on pollution-controlled vehicles. Learn More
$279.99 pr.
Doug's Headers, Full Length Steel Ceramic Coated, 5.0 & 5.7, 1982-1992 Part # 724494
Outstanding Torque & HP Over A Wide RPM Range Easy Bolt-On Installation Header Tube Size Is 1-7/8"/Collector Size 3" SAP Port Shape Not Legal For Sale Or Use In California When it's time to select headers for the street your most important criteria should be the most torque and horsepower over widest possible RPM band. And Doug's Headers deliver both in a big way. These 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992 header are tuned with the proper tube size and length to efficiently remove all of the exhaust from each cylinder and reducing pumping losses. In addition you will find the fit and finish are superb and you'll have years of leak-free operation because of Doug's extra thick flanges. Trust Rick's Camaros for all your These 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992 Camaro needs! Learn More
$665.99 Set
Camaro BBK 2-1/2" Vari-Tune Adjustable Stainless Steel Performance Muffler, Offset Part # 33-11209
High-Performance Universal Muffler Rectangular Case, 2 1/2" Inlet Diameter, Offset Chambered Internal Construction Stainless Steel Construction With Natural Finish Closed End Cap, Standard Outlet Without Tip   Camaro universal Vari-tune mufflers are a great performance addition for any Camaro. American designed and built, these performance mufflers are one of a kind, offering a muffler that can be adjusted for sound and horsepower by just moving the adjustment screw under the car. The unique design of this superb muffler allows side-to-side tuning to cut out the drowning or resonance that often happens when at a low rpm. Available aluminized or in stainless steel and in 2.5", 2.75", and 3.0", these mufflers are offered in various offsets to insure proper fit on most aftermarket and OEM applications. When you are in the market for a new high-performance muffler, invest in a BBK universal Varitune muffler. Available at Rick's Camaro today! Learn More
$139.99 ea.
Camaro BBK 3" Vari-Tune Adjustable Stainless Steel Performance Muffler, Offset Part # 33-11199
High-Performance Universal Muffler Rectangular Case, 3" Inlet Diameter, Offset Chambered Internal Construction Stainless Steel Construction With Natural Finish Closed End Cap, Standard Outlet Without Tip   Camaro universal Vari-tune mufflers are a great performance addition for any Camaro. American designed and built, these performance mufflers are one of a kind, offering a muffler that can be adjusted for sound and horsepower by just moving the adjustment screw under the car. The unique design of this superb muffler allows side-to-side tuning to cut out the drowning or resonance that often happens when at a low rpm. Available aluminized or in stainless steel and in 2.5", 2.75", and 3.0", these mufflers are offered in various offsets to insure proper fit on most aftermarket and OEM applications. When you are in the market for a new high-performance muffler, invest in a BBK universal Varitune muffler. Available at Rick"s Camaro today! Learn More
$139.99 ea.
Camaro BBK 3" Vari-Tune Adjustable Aluminized Steel Performance Muffler, Offset Part # 33-11210
High-Performance Universal Muffler Rectangular Case, 3" Inlet Diameter, Offset Chambered Internal Construction Steel Construction With Aluminized Finish Closed End Cap, Standard Outlet Without Tip   Camaro universal Vari-tune mufflers are a great performance addition for any Camaro. American designed and built, these performance mufflers are one of a kind, offering a muffler that can be adjusted for sound and horsepower by just moving the adjustment screw under the car. The unique design of this superb muffler allows side-to-side tuning to cut out the drowning or resonance that often happens when at a low rpm. Available aluminized or in stainless steel and in 2.5", 2.75", and 3.0", these mufflers are offered in various offsets to insure proper fit on most aftermarket and OEM applications. When you are in the market for a new high-performance muffler, invest in a BBK universal Varitune muffler. Available at Rick's Camaro today! Learn More
$114.99 ea.
Camaro BBK 2-3/4" Vari-Tune Adjustable Aluminized Steel Performance Muffler, Offset Part # 33-11211
High-Performance Universal Muffler Rectangular Case, 2 3/4" Inlet Diameter, Offset Chambered Internal Construction Steel Construction With Aluminized Finish Closed End Cap, Standard Outlet Without Tip   Camaro universal Vari-tune mufflers are a great performance addition for any Camaro. American designed and built, these performance mufflers are one of a kind, offering a muffler that can be adjusted for sound and horsepower by just moving the adjustment screw under the car. The unique design of this superb muffler allows side-to-side tuning to cut out the drowning or resonance that often happens when at a low rpm. Available aluminized or in stainless steel and in 2.5", 2.75", and 3.0", these mufflers are offered in various offsets to insure proper fit on most aftermarket and OEM applications. When you are in the market for a new high-performance muffler, invest in a BBK universal Varitune muffler. Available at Rick's Camaro today! Learn More
$109.99 ea.
Camaro BBK 2-3/4" Vari-Tune Adjustable Stainless Steel Performance Muffler, Offset Part # 33-11208
High-Performance Universal Muffler Rectangular Case, 2 3/4" Inlet Diameter, Offset Chambered Internal Construction Stainless Steel Construction With Natural Finish Closed End Cap, Standard Outlet Without Tip   Camaro universal Vari-tune mufflers are a great performance addition for any Camaro. American designed and built, these performance mufflers are one of a kind, offering a muffler that can be adjusted for sound and horsepower by just moving the adjustment screw under the car. The unique design of this superb muffler allows side-to-side tuning to cut out the drowning or resonance that often happens when at a low rpm. Available aluminized or in stainless steel and in 2.5", 2.75", and 3.0", these mufflers are offered in various offsets to insure proper fit on most aftermarket and OEM applications. When you are in the market for a new high-performance muffler, invest in a BBK universal Varitune muffler. Available at Rick's Camaro today! Learn More
$139.99 ea.
Camaro Magnaflow Performance Satin Stainless Steel Muffler,1984-2002 Part # 33-00013
Reversible For Custom Installation Straight-Through Wide Open Design Great Sound -Has A Smooth Deep Tone 100% Stainless Steel Construction Universal Replacement Muffler Lifetime Warranty MagnaFlow Satin Stainless Steel Muffler features top-quality stainless steel construction throughout for maximum durability. The steel is put together with smooth welds, resulting in a muffler that is built to last as much as it's built to impress. MagnaFlow Satin Stainless Steel Muffler is built to look great and last long. It is covered by a lifetime warranty. Features a straight-through perforated stainless steel core, stainless mesh wrap and acoustical fiber fill! Learn More
$129.99 ea.
Camaro BBK 2-1/2" Vari-Tune Adjustable Aluminized Steel Performance Muffler, Offset Part # 33-11212
High-Performance Universal Muffler Rectangular Case, 2 1/2" Inlet Diameter, Offset Chambered Internal Construction Steel Construction With Aluminized Finish Closed End Cap, Standard Outlet Without Tip   Camaro universal Vari-tune mufflers are a great performance addition for any Camaro. American designed and built, these performance mufflers are one of a kind, offering a muffler that can be adjusted for sound and horsepower by just moving the adjustment screw under the car. The unique design of this superb muffler allows side-to-side tuning to cut out the drowning or resonance that often happens when at a low rpm. Available aluminized or in stainless steel and in 2.5", 2.75", and 3.0", these mufflers are offered in various offsets to insure proper fit on most aftermarket and OEM applications. When you are in the market for a new high-performance muffler, invest in a BBK universal Varitune muffler. Available at Rick's Camaro today! Learn More
$109.99 ea.
Camaro Exhaust Manifold Gaskets, Copper, Small Block, 1970-1992 Part # 724011
Sure-Fire Way To Eliminate Leaks Solid Copper With Embossed O-Ring Around Ports Includes Hi-Collar Lock-Washers For Bolts Copper Will Not Shrink, Deteriorate Or Blowout Learn More

Was: $46.99 pr.

Now: $39.99 pr.
Camaro Exhaust Muffler Clamp, Steel, 2-1/4", 1967-2011 Part # RC-109
Replacement Clamp This Camaro replacement exhaust muffler clamp has been manufactured to meet or exceed factory specifications and performance. You will find the fit, finish and function will work perfectly for your Camaro. You will also be pleased to know that Rick's has sourced this exhaust muffler clamp among other possible parts as the best choice for your repair or restoration project. Learn More
$3.99 ea.
Calyx Exhaust Manifold Dressing Part # 88-0260-3
To keep your cast iron exhaust manifolds looking concours prepared perfect, use Calyx Manifold Dressing. It applies with a flannel cloth and polishes to a silver shine in seconds. After the manifold is prepared with calyx, apply when necessary, very little upkeep is required. Application of the dressing does not require removal of the manifolds. Calyx Manifold Dressing will not burn and is non-toxic. One container, 3 ounces, will do 3 sets of cast iron exhaust manifolds. Learn More
$18.99 ea.
Camaro Exhaust Muffler Clamp, Cradle Style, Steel, 2-1/4", 1967-2011 Part # SES-24
Quality Reproduction Of Original Designed From Original GM Blueprints Technically Correct OEM Style Clamps Cradle Style Was Used To Clamp The Exhaust System Together 6 Required Per Car This Camaro reproduction muffler clamp has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit and function will work superbly for your restoration. In addition, using a reproduction muffler clamp from Rick's will add authenticity and value to your Camaro. Learn More
$12.99 ea.
Camaro Exhaust Muffler Clamp, Steel, 2", 1967-2011 Part # RC-111
Replacement Clamp This Camaro replacement exhaust muffler clamp has been manufactured to meet or exceed factory specifications and performance. You will find the fit, finish and function will work perfectly for your Camaro. You will also be pleased to know that Rick's has sourced this exhaust muffler clamp among other possible parts as the best choice for your repair or restoration project. Learn More
$3.99 ea.
Camaro 305 Or 350 Header Gasket Kit, 1-5/8", 1967-2012 Part # 33-11135
Comes As A Pair Fits Only 305 Or 350 Engines Round Port Style For Use With BBK Headers Over time, the header gaskets on your 1967-2012 Camaro can get worn and not provide the proper seal that your exhaust headers need. Rick's Camaros wants to fix your problem. These reinforced header gaskets from BBK are made from the highest quality materials available. They feature a durable steel wire core to eliminate heat cracking and exhaust leaks, and provide a great seal. Measuring 1 5/8 inches, these header gaskets come as a pair for your Chevrolet Camaro's headers. They're designed for use with your BBK headers and only for 305 or 350 engines, so you can depend on these gaskets to go the extra mile. From racers, show cars, street rods, and daily drivers, you can trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2010, 2011, or 2012 F-Body Camaro! Learn More
$12.99 Kit
Camaro Exhaust Muffler Clamp, Cradle Style, Steel, 2", 1967-2011 Part # SES-22
Quality Reproduction Of Original Designed From Original GM Blueprints Technically Correct OEM Style Clamps Cradle Style Was Used To Clamp The Exhaust System Together 6 Required Per Car This Camaro reproduction muffler clamp has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit and function will work superbly for your restoration. In addition, using a reproduction muffler clamp from Rick's will add authenticity and value to your Camaro. Learn More

Was: $29.99 ea.

Now: $9.99 ea.
Thermo-Tec Insulating Wrap, Graphite Black Part # 88-1349-3
Reduces Under-Hood Temperatures up to 70% Increases Horsepower & Fuel Efficiency Withstands Heat up to 2000 Degrees The original Exhaust Insulating Wrap was developed over 12 years ago by Thermo-Tec. Exhaust Insulating Wrap is an innovative way to create more horsepower and reduce under-hood temperatures. Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust scavenging is produced, along with lower intake temperatures. Exhaust Insulating Wrap withstands continuous heat up to 2000F, and contains no asbestos. Thermo-Tec exhaust wrap will not over-insulate a system when properly installed due to a proprietary coating developed by Thermo-Tec - Thermal Conduction Technology (TCT) - that conducts heat across the wrap's surface. This coating controls heat build-up and dissipation. Just wrap it around your exhaust pipe and secure with lock ties P/N 88-0174-1. Protect wrap with Hi-Heat Coating spray P/N 88-0175-1. Wrap roll is 50' x 2" & 1/16" thick, which is enough to cover one header or exhaust pipe. Learn More
$59.99 rl.
Camaro Exhaust Cutout, 2-1/2" Part # 724606
Open Your Exhaust Up Before The Muffler 16ga. MIG Welded Steel With Three Bolt Flanges Includes Cap & Gasket Made In The USA Give your car the option to be loud when you want it to. Learn More
$79.99 ea.
Items: 1 to 28 of 31 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. Next
Grid  |  List
1