Skip to Main Content »

1-800-359-7717

Air Intake for 1988 Chevy Camaro Rs

0  Items Total: $0.00 View Cart Checkout

You're currently on:

1988 CHEVY CAMARO RS

Search Term: 'All Parts'
Category: 'Air Intake'
Vehicle: '1988 CHEVY CAMARO RS'

15 Item(s) Show per page
View as: Grid  List  Sort by
Camaro Intake Manifold Hole Plug, 1/2" Pipe Thread, Recessed Socket Drive, Stainless Steel, 1967-2002 Part # WP-26
Made in the USA T-304 Stainless steel pipe plug for most applications. Plug is socket head design. Learn More
$7.99 ea.

Add to Wishlist

Mass Air Flow Cleaner Spray Part # 88-9992-2
A Clean MAF Sensor Along With A New O2 Sensor Will Save Money At The Gas Pump 16 Ounce Aerosol Can Not Ship By Air The first product specifically developed to clean mass air flow sensors. Designed with advanced Cozol« technology. Increases horsepower & improves air/fuel ratio and MPG. Learn More
$8.99 ea.

Add to Wishlist

Camaro Intake Manifold Hole Plug, 3/8" Pipe Thread, Recessed Socket Drive, Stainless Steel, 1967-2002 Part # WP-27
Made in the USA T-304 Stainless steel pipe plug for most applications. Plug is socket head design. Learn More
$7.99 ea.

Add to Wishlist

Camaro Intake Manifold Adapter, TBI To Four Barrel, 1985-1992 Part # 718995
Better Gas Mileage & Throttle Response Works With Single Or Dual Plane Spreadbore or Squarebore Carbureted Intake Manifolds Remember To Check Hood Clearance To Air Cleaner Lid Works Great With Intakes 718316 & 718404 Your stock cast iron TBI manifold is holding your car back. With this adapter plate, you can bolt your TBI unit to any spread bore or square bore carbureted manifold. This opens the door to many aftermarket aluminum intakes with much better flow and less heat soak than the original iron. Learn More
$42.99 ea.

Add to Wishlist

Camaro Intake Manifold Hole Plug, 1/2" Pipe Thread, 12-Point Head, Stainless Steel, 1967-2002 Part # WP-31
Made in the USA T-304 Stainless steel pipe plug for most applications. Plug is 12 point head design. Learn More
$10.99 ea.

Add to Wishlist

Camaro Cold Air Intake, LSX Conversion, 1982-1992 Part # 791249
Includes Intake Tube and Filters This Air Intake Kit Is For LS Engine Conversions Only It Will Not Work With Carburetors, TBI Or TPI Engines We are happy to announce the release of the 1982-1992 Camaro LSX Conversion 4” Cold Air Intake. These have been a long awaited reproduction part for the 82-92 Camaro that are swapping their original worn out Carb, TBI & TPI Engines for the LSX drive train. This is a custom kit designed by Hawks Third Generation. This is a complete cold air intake kit for 82-92 F-Bodies with an LSX conversion, it features a 4" reversible straight through design meaning you can use the air filter on the passenger side (see pictures) or on the driver side depending on which side your battery is located. Learn More
$275.99 ea.

Add to Wishlist

$499.99 ea.

Add to Wishlist

Camaro Mass Air Flow Sensor, 5.0L. VIN Code F, 1986-1989 Part # 33-12267
High Quality Remanufactured Mass Air Flow Sensor Fits 5.0L Engine Increases Camaros Performance and Efficiency Is the service engine light on? Is the engine running rough in your 1986-1989 Camaro? You could have a failed mass air flow sensor. A mass air flow sensor (MAF) is an electrical component designed to determine the mass of the air entering a modern fuel-injected engine. This information can allow the engine control module (ECM) to provide the correct amount of fuel to the fuel-air mixture. By tightly controlling the ratio of the fuel-air mix, combustion can be rendered more efficient while emissions are reduced. A faulty mass air flow sensor can cause an engine to run poorly, or even not at all. Don't trust just any replacement part for your 1986, 1987, 1988, and 1989 Camaro. Trust Rick's Camaro for all your parts needs. Learn More
$299.99 ea.

Add to Wishlist

New!

Camaro Mass Air Flow Sensor, 5.0L, 1987-1989 Part # 33-12268
High Quality Remanufactured Mass Air Flow Sensor Fits 5.7L Engine Increases Camaros Performance and Efficiency Is the service engine light on? Is the engine running rough in your 1987-1989 Camaro? You could have a failed mass air flow sensor. A mass air flow sensor (MAF) is an electrical component designed to determine the mass of the air entering a modern fuel-injected engine. This information can allow the engine control module (ECM) to provide the correct amount of fuel to the fuel-air mixture. By tightly controlling the ratio of the fuel-air mix, combustion can be rendered more efficient while emissions are reduced. A faulty mass air flow sensor can cause an engine to run poorly, or even not at all. Don't trust just any replacement part for your 1987, 1988, and 1989 Camaro. Trust Rick's Camaro for all your parts needs. Learn More
$299.99 ea.

Add to Wishlist

New!

Camaro Intake Runners, High Flow, 1985-1988 Part # 791246
These intake runners have optimum runner volume and divider lengths to maximize airflow, and produce up to 20 additional horsepower over the stock runners depending on the application. They are cast from OE-quality, aircraft grade aluminum and precision machined for a perfect fit. These runners are an easy bolt-on upgrade for the 5.0L or 5.7L engine in 1985-1988 Camaro. No additional modifications are necessary. All necessary hardware and gaskets for proper installation are included along with complete instructions. They are legal for street use in all 50 states. Learn More
$359.99 Set

Add to Wishlist

Edelbrock 1967-1992 Camaro LS Intake Manifold Kit Part # 790419
Affordable & Trouble Free Solution For Running A Late Model Motor Made In USA Solid State Electronics 1,500-6,500 Operating RPM Range Dual Plane Intake Style Natural Aluminum Intake Finish Dual Pattern Carburetor Flange (Square Or Spread Bore) Uses Factory GM Sensors & Coils (Not Included) Works With 24x Crank Sensors Only (Pre 2006 GM V8) Rick's Camaros offers this LS intake manifold kit, manfactured by Edelbrock, for your 1967-1992 Camaro. This kit, developed by MSD & Edelbrock, will let you use any Vortec 4.8, 5.3, 6.0, or LS1/LS6 (1997-2004). The smaller 4.8 & 5.3 are plentiful and very affordable in salvage yards due to the complexity of the computer and wiring. All you need with this kit is a carburetor, and the factory sensors and coil packs from the donor vehicle. The Edelbrock/MSD ignition controller plugs into the factory sensors and coil packs and handles all computer tasks, while the carburetor does the fuel. The controller comes with 6 pre-set spark curves which will let you run whatever octane fuel you desire in your F-Body. Brackets are included to mount TH350 & 700R4 Detent/Kickdown Cables. Make your LS1 engine an easy retro-fit into any muscle car, street rod or marine application with American-made Edelbrock Performer RPM LS1 intake manifold kits. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 197, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, or 1992 Camaro! Learn More
$865.99 ea.

Add to Wishlist

Camaro Secoundary Air Injection Smog Check Valve, 1982-1992 Part # 33-10981
Restoration Correct Factory Original Part Correct Fit And Finish Also Fits IROC 89-90, RS 92, Z28 91-92 Fits 4, 6 And V8 Engines Made In USA As your 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992 Camaros emission system begins to age, parts begin to wear and rust, one of the main items is the Secondary Air Injection Check Valve. Ricks Camaros and AC Delco offer this factory original secondary air injection check valve. This check valve also fits the IROC 89-90, RS 92 and Z28 91-92. Now you can complete that factory correct restoration on your 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992 Camaro with this factory AC Delco part, use the same parts Chevrolet used from the factory when your Camaro was new. Trust Ricks Camaros for all your parts needs. Learn More
$39.99 ea.

Add to Wishlist

MaxCool Intake Cooling Pack Part # 749005
Increases Horsepower By Cooling Incoming Air   Installs In Seconds   Eliminates The Need For Messy Ice Bags It's a known fact, decreasing the inlet air charge on any engine will increase your horsepower. Now you can accomplish this in just seconds with the Max Cool Intake Pack. It is made of a dual layer of polyester which holds three ice gel packs. Simply put them in the freezer before you drag race and apply them at the track prior to making a run. You will be amazed at how much it can reduce your E.T. The Pack rests on any intake or nitrous bottle and should be removed prior to run and thrown into your cooler. Making extra horsepower is as simple as that. Learn More

Regular Price: $35.00 ea.

Sale Price: $34.99 ea.

Add to Wishlist

Camaro Mass Air Flow Sensor, 2.8L, 1985-1989 Part # 33-12263
High Quality Remanufactured Mass Air Flow Sensor Fits 2.8L Engine Increases Camaros Performance and Efficiency Is the service engine light on? Is the engine running rough in your 1985-1989 Camaro? You could have a failed mass air flow sensor. A mass air flow sensor (MAF) is an electrical component designed to determine the mass of the air entering a modern fuel-injected engine. This information can allow the engine control module (ECM) to provide the correct amount of fuel to the fuel-air mixture. By tightly controlling the ratio of the fuel-air mix, combustion can be rendered more efficient while emissions are reduced. A faulty mass air flow sensor can cause an engine to run poorly, or even not at all. Don't trust just any replacement part for your 1985, 1986, 1987, 1988, and 1989 Camaro. Trust Rick's Camaro for all your parts needs. Learn More
$59.99 ea.

Add to Wishlist

New!

15 Item(s) Show per page
View as: Grid  List  Sort by
1