Product Experts Available 1-800-359-7717

Filter Your Results

 

1989 CAMARO PAINTS

Search Term: 'All Parts'
Category: 'Paints'
Vehicle: '1989 CHEVY CAMARO'

Rick’s Camaros is your one-stop shop for 1989 Camaro parts. The sought-after 1989 Camaro was a 3rd Generation Camaro. Spanning from 1982-1992, 3rd Generation Camaros were equipped with factory fuel injection, four-cylinder engines, 16 inch wheels and hatchback body styles. The slightly smaller 3rd Gen Camaros were the first built without front subframes or leaf-spring rear suspensions. Adding to the impressive all new design, 3rd Gen Camaros were also the first to feature four-speed automatic transmissions and five-speed manual transmissions. Third Generation Camaros included the Sport Coupe, Berlinetta, and Z28 models. 1989 Camaro models included the RS Coupe, RS Convertible, IROC-Z Coupe and IROC-Z Convertible. Last used in 1980, the RS designation returned for the 1989 model year. Available with either the V6 or a throttle-body-injected 5.0-liter V8, the 1989 Camaro RS models included a trim package over the base sport coupe. 1989 Camaro IROCs featured a dual-converter option that boosted horsepower to 240 that was available only with the TPI 350. In addition to carrying 1989 Camaro parts, we have parts for all third generation Camaro models available. We have the best prices and we have all the 3rd generation Camaro parts and accessories you need to help you restore your 1989 Camaro.

Items: 1 to 28 of 52 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. Next
Grid  |  List
Best Sellers
Dash Paint, Semi Flat Black Part # 88-0290-3
Restore the face of your dash with our black dash paint.. Cannot be shipped by air. Learn More
$10.99 ea.
Engine Compartment Paint, Black, Wurth Part # 88-0192-3
  Low Gloss Ideal For Restoration Look 12 Ounce Spray Cannot Ship By Air   Learn More
$12.99 ea.
Rust Preventive Paint, Black, Semi-Gloss, POR-15® Part # 88-0270-3
Prevents Rust By Protecting Against Moisture Ideal For Chassis Components & Floor Pans Allows Application With Brush, Roller Or Spray Applied directly on rusted or seasoned metal surfaces, this high-tech coating dries to an incredibly rock-hard, non-porous, black finish that is flexible yet won't chip, crack or peel. Available in semi-gloss or gloss (Item# POR-101), it prevents rust from recurring by protecting metal from further exposure to moisture. The one-quart can covers approx. 96 square feet. Learn More
$49.99 qt.
Rust Encapsulator Black Aerosol Paint, 16oz Part # 88-1155-3
Epoxy-Fortified For Better Adhesion & Topcoat Compatibility Penetrates Deeper To Prevent Rust From Spreading Or Forming, Even In Hard-To-Reach Areas Cures Faster, & The Low-VOC Formula Is Acceptable In California 15-oz. Aerosol Covers About 10 sq. ft. As Seen On "My Classic Car" TV Show You thought it was good before...wait til you try this Rust Encapsulator! It seals and stops rust and corrosion from spreading, but it performs even better than our original formula. Tested against well-known brands, the Rust Encapsulator has proven to be superior in sunlight resistance, preventing rust creep, and overall durability. Learn More
$21.99 ea.
Hole & Seam Filler, POR-15® Part # 88-0268-3
Use To Repair Pinholes Or Seams In Body Metal Or Gas Tanks With No Welding Dries Hard Yet Remains Flexible Impervious To Fuel & Solvent Waterproof 4 Oz. Tube Black In Color Learn More
$19.99 ea.
Camaro Spray Paint, Black, Low Gloss, 1967-1992 Part # AP-105
16 oz. Spray Can Prevent Rust & Corrosion Concourse Finish Learn More

Was: $18.99 ea.

Now: $16.99 ea.
Silver Cadmium Spray Part # 88-0297-3
Reproduces The Look Of Cadmium Plating Use On Hood Hinges, Door Latches, Carburetor Rods & More 12 Oz. Can Cannot Be Shipped By Air Learn More
$15.99 ea.
Chassis Spray Paint, Black Part # 88-0298-3
Reproduces Original Semi-Gloss Black Correct 60-70% Gloss Great For Frames & Suspension Components Covers 8 Sq. Ft. Epoxy Based For More Durable Finish 15 Oz. Cannot Be Shipped By Air Learn More
$17.99 ea.
Cast Iron Spray Paint, Gray Part # 88-0285-3
A good selection of excellent quality, reasonably priced paints that provide durability and protection with appearances similar to factory original. All in easy to use aerosol spray cans. Learn More
$11.99 ea.
Exhaust Manifold Paint, POR-15® Part # 88-0266-3
Restores Factory Manifolds To Original Gray Color Brush Or Spray Application Learn More

Was: $56.99 pt.

Now: $29.99 pt.
Diamond Clear Satin Finish Part # 88-0305-3
For Bare Metal 12 Ounce Spray This product delivers the same durable protection with clarity as our High Gloss version: Classic Chevy is pleased to announce Eastwood's new addition to their line of Diamond Clear products. They have responded to your requests to deliver a durable coating that protects while presenting a bare metal appearance. This new coating resists fuels while standing temperatures up to 300° F. Great for providing an invisible protective barrier for aluminum manifolds, cast alloy valve covers, distributors, alternator housings and more. Learn More
$15.99 ea.
Rust Prevention Magic (RPM) Part # 88-1314-3
Keeps Metal Parts Looking Brand New! Easy To Use With Detailed Instructions 8oz Tub Goes A Long Way Eckler's is proud to announce a breakthrough in metal protection for your classic ride. RPM (Rust Prevention Magic) keeps metal parts looking brand new! No more painting and changing the look of the part. RPM was developed for and used exclusively on the "Project Valiant" which scored a best in show at the Mopar Nationals and was awarded the highest scoring OE car ever! This new wax-like product is easy to apply and will protect bare metal from rusting. It will not reverse rust or remove it, so you will need to sandblast or glass bead any rusty parts clean first. You apply it by heating the clean part up to 120 degrees F using a hair blow dryer or heat gun, then you brush the RPM on with included paint brush. The substance melts as it is brushed onto the hot part. It gets into the pores of the metal and prevents rust from forming. Wipe the excess RPM off with a towel or paper towel and let it come back to room temperature and dry. The RPM dries to an invisible barrier that prevents rust from forming. Learn More
$34.99 ea.
Rubberized Rust Encapsulator Undercoating, Black Part # 88-0422-3
Flexible Finish Protects Surfaces From Abrasions, & Deadens Sound Epoxy-Fortified For Better Adhesion & Durability Withstands Up To 250°F One Aerosol Covers About 10 Square Feet Unlike off-the-shelf under coatings, Rubberized Rust Encapsulator can be applied directly over rust and without the bubbling that creates air pockets thus trapping rust. Since it is engineered with high-tech flex agents, its pliable finish protects surfaces from abrasions, road hazards and deadens sound. So durable it exceeded 1,000 hours of salt spray chamber testing, this surpasses the standards for a 2-component catalyzed coating! Simply apply directly over rust or bare metal; no need to topcoat. Remains flexible and durable. Satin black finish. Application: Use a wire brush to remove loose rust, scale and paint, and remove dust, grease and oil deposits. Feather surrounding paint with 220-grit sandpaper. Shake can for at least 2 minutes once the mixing ball starts to rattle. Hold the Rubberized Rust Encapsulator can 10"-12" above surface as you spray. A single coat dries to the touch in 20 minutes, and is thoroughly dry in 3-4 hours at 68°F. For greater durability, a second coat can be applied 1 hour after the first. Allow 6-8 hours after the last coat before applying topcoat. Use over or under body fillers. Content: 15-oz. Learn More
$19.99 ea.
Rust Preventive Paint, Black, Gloss, POR-15® Part # 88-0269-3
Prevents Rust By Protecting Against Moisture Ideal For Chassis Components & Floor Pans Allows Application With Brush, Roller Or Spray Applied directly on rusted or seasoned metal surfaces, this high-tech coating dries to an incredibly rock-hard, non-porous, black finish that is flexible yet won't chip, crack or peel. Available in gloss or semi-gloss (Item# POR-100), it prevents rust from recurring by protecting metal from further exposure to moisture. The one-quart can covers approx. 96 square feet. Learn More
$49.99 qt.
Aluminum Spray Paint Part # 88-0286-3
A good selection of excellent quality, reasonably priced paints that provide durability and protection with appearances similar to factory original. All in easy to use aerosol spray cans. Learn More
$11.99 ea.
Spray Paint, Manifold, VHT Hi-Temp Nu-Cast Part # 88-0289-3
Resists Heat Up To 1200 F Ideal For Exhaust Manifolds, Headers, Pipes & Mufflers 11 Oz. Spray Learn More
$13.99 ea.
Gas Tank Zinc Tone Paint Part # 88-0299-3
Protects Tank Against Rust & Provides A Fresh, New Look This gas tank coating contains zinc to protect against rust damage and stop minor surface rust from spreading. Cannot be shipped by air. Learn More
$15.99 ea.
Gloss Chassis Black Spray Part # 88-0293-3
Correct Sem-Gloss Black Epoxy Base Resists Chips & Scratches Ideal For Use On Frames & Suspension Parts 15 Ounce Spray Can Learn More
$17.99 ea.
Internal Frame Coating Paint Part # 88-1150-3
Converts Encapsulates & Seals Rust On Internal Surfaces Phenolic Resin With Zinc Additive Eliminates Further Corrosion Can Used In Several Places Such As Doors, Etc... Internal frame coating is formulated to convert and encapsulate the rust INSIDE your frame. This formulation also incorporates zinc phosphate to further protect the metal from future corrosion. The viscosity is stabilized to assure proper flow and penetration to the existing corrosion and will yield complete coverage when sprayed with the included "conical nozzle". Easy to use, must have product, that is aerosolized to simply spray the entire inside of the frame with the supplied extension tube and "conical nozzle" for complete coverage and elimination of the rust for years of protection. Fully cures in 24 hours. Learn More
$19.99 ea.
Metal Ready POR-15®, Quart Part # 88-3402-3
Safe & Easy To Use Removes Surface Rust In Minutes! Coats Metal With Zinc Phosphate Provides Perfect Base For All Paints Gives Better Welding Conductivity PREP & READY provides the best adhesion for POR-15 on any metal surface, including aluminum and shiny polished metal surfaces. This simple process gently etches metal, creating an ideal anchor pattern for coatings such as POR-15®, while simultaneously leaving a zinc phosphate coating to insure chemical bonding of paint andsteel. PREP & READY Features Easy to use - one step process No harmful residues Is reuseable Removes surface rust in minutes Coats metal with zinc phosphate Insures perfect paint adhesion Provides perfect base for all paints Gives better welding conductivity. Avoid other preps that may leave harmful residues which prevent proper adhesion. After thoroughly degreasing your work piece, apply environmentally safe PREP & READY to both neutralize any rust and etch any clean bare metal. This will allow better adhesion of POR-15 or any other paint. PREP & READY is not caustic, corrosive, toxic or flammable. Learn More
$19.99 qt.
Radiator Black Spray Part # 88-0301-3
Most Radiators Required 2 Cans For Full Coverage 12 Ounce Spray Can Made In The USA   Standard engine paints are too thick for radiator use because they can interfere with heat transfer and block air flow between the cooling fins. Also, standard paint tends to flake off radiator tanks. Radiator Black helps solve this problem. Durable Enamel formulation resists temperatures up to 250ºF, gas and chipping. One can covers 6 square feet (most radiators require 2 cans). Net wt. 12 oz. Radiator Black Gloss - Many have asked for a lower sheen radiator black. The lower gloss sheen resembles the gloss level of modern plastic tank radiators and some imports. Learn More
$14.99 ea.
Rust Encapsulator Aerosol Spray Part # 88-0306-3
16 Ounce Spray Stabilizes Rust Prevents Further Rusting For Use Where Rust Can't Be Removed Can Be Topcoated With Virtually All Paint Systems Learn More
$29.99 ea.
Brake Caliper Paint System, Red Part # 88-0314-3
Produces High Gloss Finish Withstands High Brake Temperatures Easy Brush-On Applications Cannot Be Ship By Air Today's custom wheels show brake calipers more than ever before and this G2 paint system from Eckler's allows them to look their best. Everything necessary to dress-up and protect your Chevelle's brake calipers is contained in this set. The G2 Brake Caliper Paint System set includes a high-performance brake caliper spray cleaner, a two-part high gloss paint that withstands up to 980F, a mixing stick and an application brush. Unlike spray can products, this G2 brake caliper brush-on paint is neater to apply, will not flake off and dries much harder. Your brake calipers will look fantastic and they'll be protected against rust and corrosion. Eckler's has the products that make your Chevelle stand out in any crowd. Learn More

Was: $42.99 Kit

Now: $39.99 Kit
Por-15® Rust Paint (Silver)-Quart Part # 88-3406-3
Great For Auto Restoration, Floors, Chassis, Trunk, Etc... Stops Rust 1 Quart Paint right over rust on floor pans, frames, chassis components, or anywhere you see rust developing. Por - 15 is the toughest rust coating available. So tough after applied it will not crack even under the impact of a hammer. Por - 15 is not affected by salt, gasoline, or oil. Por - 15 stops the rust from reaching the base metal. This must be shipped via ground service. Learn More
$49.99 qt.
Por-15® Rust Paint (Black)-Gallon Part # 88-3404-3
Great For Auto Restoration, Floors, Chassis, Trunk, Etc... Stops Rust 1 Gallon Paint right over rust on floor pans, frames, chassis components, or anywhere you see rust developing. Por - 15 is the toughest rust coating available. So tough after applied it will not crack even under the impact of a hammer. Por - 15 is not affected by salt, gasoline, or oil. Por - 15 stops the rust from reaching the base metal. This must be shipped via ground service. Learn More
$169.99 gl.
Engine Painting Kit, Chevrolet Orange, POR-15® Part # 88-0265-3
Includes Everything Needed to Completely Refinish Your Engine Cleaner To Remove Dirt, Grease & Oil Metal Ready To Dissolve Rust & Prep Metal, POR-15 To Seal & Rustproof The Engine & Extra Pigment Engine Enamel To Preserve A Perfect Shiny Finish Forever Also Includes Brushes, Gloves & Face Mask Cannot Be Shipped By Air Learn More

Was: $65.99 Kit

Now: $59.99 Kit
Rust Doctor Non-Toxic Rust Repair System, Quart Part # 88-1175-3
Non Toxic Converts Rusty Metal To Black Magnetite Rust Doctor is a non-toxic, water based latex paint that allows you to paint over rusty metal and then topcoat with any kind of paint without the need to sand or grind to bare metal. Unlike other products on the market, Rust Doctor contains no solvents, acids, or harsh chemicals. It is completely non-toxic. How it works Rust Doctor works on a molecular level to chemically convert rusty metal to black magnetite -- a very hard form of iron oxide. Because magnetite is inert (will not react with moisture and oxygen), it creates a protective layer that keeps the metal from rusting. One Step Application To further ensure complete rust elimination, the Rust Doctor paint formula includes a high-quality latex primer that bonds with the magnetite surface. This allows immediate application of a top coat with any kind of paint (latex, epoxy, oils, etc.). In one simple step, the rust is converted to magnetite and the surface is primed. Learn More
$41.99 qt.

Regular Price: $21.99 ea.

Sale Price: $14.99 ea.

Items: 1 to 28 of 52 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. Next
Grid  |  List
4