Product Experts Available 1-800-359-7717

1989 CAMARO RS CHEVY BODY PARTS

Search Term: 'All Parts'
Category: 'Body Parts'
Vehicle: '1989 CHEVY CAMARO RS'

Items: 1 to 28 of 54 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. 3
  4. Next
Grid  |  List
Best Sellers
Camaro Headlight Panel, 1982-1992 Part # 731348
Highest Quality Headlight Housing For Camaro Thermo Molded Plastic Construction Fits Inside Front Bumper Cover   Camaro headlight housings are as fragile as glass. Even though they are tucked snugly inside your Camaros front bumper, the header panel will snap leaving your third gen’s nose unsupported. After a collision you may be tempted to allow repairs to you headlight housing. Why chance  misalignment  of your front end panels or headlights. Rick’s Camaros offers a headlight housing  that will put the temptation to repair to rest. Our reproduction headlight housing is reproduced to factory specifications giving you an exceptional fit.  If your beauty has suffered a front end blow, repair her right with a  headlight support housing from Rick’s Camaros. Learn More
$32.99 ea.
Camaro Bumper Cover, Front, GM, 1985-1992 Part # 716048
Stock Replacement Fits:    1985-92 IROC-Z Or Z28    1988-92 Standard Or Rally Sport (RS) When its time to replace the bumper cover on your 1985-92 Camaro look no further. Our urethane stock replacement is ready to prep, paint and install. Learn More
$376.99 ea.
Camaro Front Bumper, Fiberglass, 1985-1992 Part # 716145
Highest Quality Camaro Fiberglass Front Bumper 1982-1984 Upgrade 1985-1989 Direct Replacement 1990-1992 Requires Using 1985-1989 Fog Lights 1-1/2 Oz. Fiberglass Mat (3 Layers) 21 Mils Of Soft-Sanding Gelcoat Contains All Original Mounting Tabs & Bosses Cured For 24 Hours In The Mold Bolt-On Installation Hand Laminated Fiberglass Finally! The wait for a third generation Camaro front bumper is over.  Rick’s Camaros offers a fiberglass reproduction front bumper and spoiler assembly for your 1985, 1986, 1987, 1988, 1989, 1990, 1991 or 1992 Camaro. Our front nose been designed with the IROC/Z28 front bumper and spoiler as an affordable one piece header panel unit. Purchased separately, the spoiler alone from GM is upwards of $300. If you are lucky enough to find a new GM urethane bumper in the box, it has been sitting on a shelf for 20 years, and will require extensive prep work to return to its original shape. All you need to do to this front nose is sand, prime and paint! Our front bumper and spoiler combo is made for use with 1986 and up IROC/Z28 parking lamps. While this front bumper will fit Rally Sport models, the sides of the lower spoiler won't have scoops like the original. It’s easy to update your 1985,1986, 1987, 1988, 1989, 1990, 1991 or 1992 Camaro’s front end with a Z28 style one piece front bumper and spoiler from Ricks Camaros. Learn More
$489.99 ea.
Camaro Fender, Right, 1982-1990 Part # 731350
 Reproduction Of Original Passenger Side Fender   Rusty front fenders on your 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990 Camaro just wouldn’t cut it at the next show. Your Camaro was always meant to outshine other vehicles on the road. However, how can it do that when it begins to rust? Your Camaro won’t get the respect it deserves with its growing blemishes. The front fenders of your Camaro are your friend, as they are crucial in protection for your front wheels, and as such, the fenders are the most heavily prone to damage in the case of minor collisions and more often, rusting over time. Rust can creep up on vehicles and do a lot of damage. It can be quite costly to fix fender dents and dings on old rusty front fenders, which is where Ricks Camaros is happy to step in as your Camaro’s body shop. Ricks Camaros brings you this quality reproduction Camaro front fender made from sturdy sheet metal, so you can start with a clean slate before you paint. Our F-Body Camaro fenders are EDP (Electro Deposit Primer) coated, an excellent primer applied electrically, prior to your paint job, which ensures rust-resistant sheet metal and stamped from proper sheet metal gauge. There is no need to waste your time and energy checking rusty areas to weld patch panels at the end of the day, and Ricks Camaros wants to provide you with quality replacement front fenders that bolt up like original factory specifications, at a great price. All you have to do is put it on! Treat your 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990 Camaro the way it was meant to be treated: rust free, and replace your front fenders today with Ricks Camaros.     Learn More

Was: $79.99 ea.

Now: $74.99 ea.
Camaro Fender, Left, 1982-1990 Part # 731357
Reproduction Of Original Driver's Side Fender   Rusty front fenders on your 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990 Camaro just wouldn’t cut it at the next show. Your Camaro was always meant to outshine other vehicles on the road. However, how can it do that when it begins to rust? Your Camaro won’t get the respect it deserves with its growing blemishes. The front fenders of your Camaro are your friend, as they are crucial in protection for your front wheels, and as such, the fenders are the most heavily prone to damage in the case of minor collisions and more often, rusting over time. Rust can creep up on vehicles and do a lot of damage. It can be quite costly to fix fender dents and dings on old rusty front fenders, which is where Ricks Camaros is happy to step in as your Camaro’s body shop. Ricks Camaros brings you this quality reproduction Camaro front fender made from sturdy sheet metal, so you can start with a clean slate before you paint. Our F-Body Camaro fenders are EDP (Electro Deposit Primer) coated, an excellent primer applied electrically, prior to your paint job, which ensures rust-resistant sheet metal and stamped from proper sheet metal gauge. There is no need to waste your time and energy checking rusty areas to weld patch panels at the end of the day, and Ricks Camaros wants to provide you with quality replacement front fenders that bolt up like original factory specifications, at a great price. All you have to do is put it on! Treat your 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990 Camaro the way it was meant to be treated: rust free, and replace your front fenders today with Ricks Camaros. Learn More
$78.99 ea.
Hood Scoop, L88 Style, Fiberglass, Extra Long And High Part # 88-1920-3
Hand Laminateded Fiberglass High-Performance Upgrade Measures 58" Long, 29 Wide And 5" High A fiberglass hood scoop will perfectly complement the high-performance look of your classic Camaro. A fiberglass hood scoop works hard to allow air flow directly into the engine compartment. Depending on your need, this part is cross-functional as a performance and decorative piece. Constructed of fiberglass, this part is built for achieving peak-performance. Fiberglass offers a lightweight alternative to heavy stamped steel materials. It is also advantageous because of better gas mileage and the pronounced stylish look that will result.  Whether you’re entering a NHRA event that requires your classic to have a hood scoop or you’re just completing your long-time restoration, Ecklers has you covered. Invest in a L88-Style fiberglass hood scoop for your classic Camaro. Available at Rick's Camaro today!  This hand laminated L88 hood scoop will bond to any hood. The extra-long (58") scoop will give extra room for those large engines with all the accessories. These fiberglass body panels are made of the finest automotive grade resins, 1-1/2 oz. mat (3 layers) and 21 mils of soft-sanding gelcoat. Eckler's panels are wave-free because of the heavily reinforced molds that are copied from original GM panels and they are allowed to cure 24 hours before being pulled from the molds.   Learn More
$259.99 ea.
Camaro Floor Pan, Full, Left, 1982-1992 Part # 731361
Reproduction Of Original Full Floor Pan Patch Repair Panel Full Length From The Beginning Of The Toe Board To The End Of The Bottom Seat Area Natural Steel Finish Left (Driver's Side) Rick’s Camaros stamped steel sheet metal floor pan repair panels are crucial when rust rears its ugly head. 1982-1992 Camaro floor pans take a beating over the years and are rarely rust-free. Rick’s Camaros sources sheet metal floor pans from the world’s premium manufacturers to bring you only the very best for your restoration. F-Body floor pans are stamped on heavy ton equipment from correct gauge steel to ensure factory style contours and maximum rigidity over originals. The left side full patch floor pan reaches from the toe board to the end of the rear seats of your Third Generation Camaro. Floor pans from Rick’s Camaros must be welded in and usually fitted, so never cut out your original floor pans before receiving replacements. We highly recommend the use of a skilled body shop when installing replacement Camaro floor pans and to always check other related items such as floor braces, rocker panels, toe panels and seat supports for other potential replacement needs. We have sold thousands of sheet metal floor pans and will stand by each purchase to make sure that your 3rd generation Camaro is restored to perfection. From racers, hot rods or daily drivers, trust Rick’s Camaros for all of your restoration and replacement needs for your 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, or 1992 Camaro!   Learn More
$299.99 ea.
Camaro Rear Quarter Panel Lower, Left, 1982-1992 Part # 731602
High Quality Replacement Quarter Patch Panel Original Gauge Steel Stamped In North America     Rusty body panels on your Camaro just won’t cut it at the next show, or on the street for that matter. Your Camaro was built to outshine the others. But, how can she do that when she starts to rust? Rust can creep up on Camaro and do a lot of damage. Your classic beauty won’t get the respect she deserves with her growing blemishes. Rick's Camaros offers a line of repair panels designed to help you cut out the rust and get your baby back in tip top shape. Our heavy gauge stamped steel patch panels offer you the ability to cut the rust out on your Camaro without replacing the entire panel. Our stamped panels are closely shaped to your car’s original body lines, so installation is easier than with an unformed sheet metal panel. Our EPD coated panels give you a leg up on rust prevention. Whether rust has invaded your 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991 or 1992 Camaro fender, door or quarter panel, you’re sure to find the patch panel you’re looking for at Ricks Camaros. From show stoppers, racers, hot rods to daily drivers, you can count on Rick's Camaros for all of your restoration and replacement needs for your 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991 or 1992 Camaro.   Learn More
$39.99 ea.
Camaro Rear Quarter Panel Lower, Right, 1982-1992 Part # 731603
High Quality Replacement Quarter Patch Repair Panel Original Gauge Stamped Steel Stamped In North America   Rusty body panels on your Camaro just won’t cut it at the next show, or on the street for that matter. Your Camaro was built to outshine the others. But, how can she do that when she starts to rust? Rust can creep up on Camaro and do a lot of damage. Your classic beauty won’t get the respect she deserves with her growing blemishes. Rick's Camaros offers a line of repair panels designed to help you cut out the rust and get your baby back in tip top shape. Our heavy gauge stamped steel patch panels offer you the ability to cut the rust out on your Camaro without replacing the entire panel. Our stamped panels are closely shaped to your car’s original body lines, so installation is easier than with an unformed sheet metal panel. Our EPD coated panels give you a leg up on rust prevention. Whether rust has invaded your 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991 or 1992 Camaro fender, door or quarter panel, you’re sure to find the patch panel you’re looking for at Ricks Camaros. From show stoppers, racers, hot rods to daily drivers, you can count on Rick's Camaros for all of your restoration and replacement needs for your 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991 or 1992 Camaro.   . Learn More
$39.99 ea.
Camaro Lower Door Skin, Right, 1982-1992 Part # 731593
High Quality Lower Door Patch Repair Panel Heavy Gauge Stamped Steel Repairs Lower Section Of Outer Door Skin   Rusty body panels on your Camaro just won’t cut it at the next show, or on the street for that matter. Your Camaro was built to outshine the others. But, how can she do that when she starts to rust? Rust can creep up on Camaro and do a lot of damage. Your classic beauty won’t get the respect she deserves with her growing blemishes. Rick's Camaros offers a line of repair panels designed to help you cut out the rust and get your baby back in tip top shape. Our heavy gauge stamped steel patch panels offer you the ability to cut the rust out on your Camaro without replacing the entire panel. Our stamped panels are closely shaped to your car’s original body lines, so installation is easier than with an unformed sheet metal panel. Our EPD coated panels give you a leg up on rust prevention. Whether rust has invaded your 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991 or 1992 Camaro fender, door or quarter panel, you’re sure to find the patch panel you’re looking for at Ricks Camaros. From show stoppers, racers, hot rods to daily drivers, you can count on Rick's Camaros for all of your restoration and replacement needs for your 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991 or 1992 Camaro.   Learn More

Was: $39.99 ea.

Now: $36.99 ea.
Camaro Outer Lower Door Skin, Left, 1982-1992 Part # 731592
High Quality Replacement Lower Door Patch Repair Panel Heavy Gauge Stamped Steel Repairs Lower Section Of Outer Door Skin    Rusty body panels on your Camaro just won’t cut it at the next show, or on the street for that matter. Your Camaro was built to outshine the others. But, how can she do that when she starts to rust? Rust can creep up on Camaro and do a lot of damage. Your classic beauty won’t get the respect she deserves with her growing blemishes. Rick's Camaros offers a line of repair panels designed to help you cut out the rust and get your baby back in tip top shape. Our heavy gauge stamped steel patch panels offer you the ability to cut the rust out on your Camaro without replacing the entire panel. Our stamped panels are closely shaped to your car’s original body lines, so installation is easier than with an unformed sheet metal panel. Our EPD coated panels give you a leg up on rust prevention. Whether rust has invaded your 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991 or 1992 Camaro fender, door or quarter panel, you’re sure to find the patch panel you’re looking for at Ricks Camaros. From show stoppers, racers, hot rods to daily drivers, you can count on Rick's Camaros for all of your restoration and replacement needs for your 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991 or 1992 Camaro.   Learn More

Was: $39.99 ea.

Now: $36.99 ea.
Camaro Floor Pan, Full, Right, 1982-1992 Part # 731360
Reproduction Of Original Full Floor Pan Patch Repair Panel Full Length From The Beginning Of The Toe Board To The End Of The Bottom Seat Area Natural Steel Finish Right (Passenger's Side) Rick’s Camaros stamped steel sheet metal floor pan repair panels are crucial when rust rears its ugly head. 1982-1992 Camaro floor pans take a beating over the years and are rarely rust-free. Rick’s Camaros sources sheet metal floor pans from the world’s premium manufacturers to bring you only the very best for your restoration. F-Body floor pans are stamped on heavy ton equipment from correct gauge steel to ensure factory style contours and maximum rigidity over originals. The right side full patch floor pan reaches from the toe board to the end of the rear seats of your Third Generation Camaro. Floor pans from Rick’s Camaros must be welded in and usually fitted, so never cut out your original floor pans before receiving replacements. We highly recommend the use of a skilled body shop when installing replacement Camaro floor pans and to always check other related items such as floor braces, rocker panels, toe panels and seat supports for other potential replacement needs. We have sold thousands of sheet metal floor pans and will stand by each purchase to make sure that your 3rd generation Camaro is restored to perfection. From racers, hot rods or daily drivers, trust Rick’s Camaros for all of your restoration and replacement needs for your 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, or 1992 Camaro!   Learn More
$299.99 ea.
Camaro Hood, Cowl Induction, 2" Rise, 1982-1992 Part # 731320
Replacement Steel Hood Hood Is Ready To Prep, Paint & Install Chevrolet never offered a cowl induction hood for the Third Gen Camaro, but you can fix that. This factory quality all-steel cowl induction hood from Eckler's Camaro arrives ready for you to prep, paint and install. With this cowl induction hood in place, your engine will thank you with more power from cooler intake air and you'll appreciate the bolder, more muscular look of your car. There'll be more space for high-performance engine intake equipment too. Since this cowl induction hood simply bolts on using the original hood brackets, no modifications are required for installation. Eckler's Camaro has all the best in Camaro parts and accessories. Learn More
$479.99 ea.
Tilt Hood Kit, Standard, Universal Part # 88-1340
High Strength Black Finish Industrial Steel Construction Adjustable Hood Hinge Detailed Instructions Limited Lifetime Warranty Professional Installation Recommended Tilt your hood the right way! This Tilt Hood Kit gives you the same custom look of many of world's top performance vehicles. This kit makes it easy to reverse the tilt on your hood! Not only does it give you a custom look, it also allows for easy access and maximum visibility, so everyone can see what your rocking under the hood! Learn More
$229.99 Kit
Camaro Hood, Stinger Style, Corvette Big Block, Fiberglass,1982-1992 Part # 731371
High-Performance Upgrade Fiberglass Construction Custom Hood Bolt-On Application A Camaro fiberglass stinger-style hood will perfectly complement the performance look of your 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, or 1992 RS, Berlinetta or Z28 classic. The hood is the hinged cover that protects your classic’s engine and allows for easy maintenance and repair. In addition to the protection, the hood sets the style for the rest of the car to follow. This fiberglass hood is a stinger-style model. Whether you need this hood's extra clearance to make room for an obscene power plant or you just want to use its rugged, aggressive style to intimidate your enemies, this hood has you covered. It is constructed of fiberglass for added performance and flair. Molded fiberglass parts allow for sleeker shapes and curves, increased gas mileage, and a more performance-oriented part. Heavy stamped sheet metal will slow your roll. Achieve peak-performance and unparalleled expression with a new custom stinger-styled fiberglass hood for your 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991 or 1992 Chevy Camaro. Available at Rick’s Camaro today! These are made of the finest automotive grade resins, 1-1/2 oz. mat (3 layers) and 21 mils of soft-sanding gelcoat. Stinger Fiberglass panels are wave-free because of the heavily reinforced molds which are allowed to cure 24 hours before the hoods are pulled from the molds. Learn More
$549.99 ea.
Camaro Hood, Daytona Style, 3" Rise, Fiberglass, 1982-1992 Part # 731367
High Quality Fiberglass Custom Hood Bolt-On Installation Ready To Sand, Prime & Paint A Camaro fiberglass Daytona style hood will perfectly complement the performance look of your 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, or 1992 RS, Z28, or IROC-Z Camaro. The hood is the hinged cover that protects your classic’s engine and allows for easy maintenance and repair. In addition to the protection, the hood sets the style for the rest of the car to follow. This fiberglass hood is a Daytona style model, giving your RS Camaro originality and a mean appearance. It is constructed of fiberglass for added performance and flair. Molded fiberglass parts allow for sleeker shapes and curves, increased gas mileage, and a more performance-oriented part. Heavy stamped sheet metal will slow your roll. Achieve peak-performance and unparalleled expression with a new custom Daytona style fiberglass hood for your 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, and 1992 RS Camaro. Available at Rick’s Camaro today! These are made of the finest automotive grade resins, 1-1/2 oz. mat (3 layers) and 21 mils of soft-sanding gelcoat. Stinger Fiberglass panels are wave-free because of the heavily reinforced molds which are allowed to cure 24 hours before the hoods are pulled from the molds. There are other manufacturers of Camaro hoods, but you'll find Stinger Fiberglass hoods are unequaled in the industry for consistent fit, finish and ease of installation.         Learn More
$549.99 ea.
Camaro Bumper, Rear, Flex Fit Fiberglass, RS/Z28 Or Standard,1982-1992 Part # 716162
High Performance Upgrade Flexible Fiberglass Construction Bolt On Application Fit, Sand, Prime And Paint A Camaro fiberglass flex-fit front bumper will perfectly complement your 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, or 1992 Z28 coupe or RSW convertible Camaro’s high-performance look and feel. Overtime, bumpers endure many hardships. Whether it is environmental externalities, a desired restoration, car accident or whatever the cause may be, your bumper will often requires replacement. When doing so, take utility into consideration. What is it you desire? A new look, better performance or a race-ready bumper? Fiberglass has many advantages over stamped sheet metal for your Rally Sport. Fiberglass offers a lightweight alternative to heavy sheet metal for that desired racers edge in your classic Z28. Unlike stamped sheet metal, fiberglass provides improved fuel economy and an unparalleled customizable flair. When you’re in the market for a new rear bumper for your 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, and 1992 Z28 Camaro, fiberglass is your answer, and Rick’s Camaros is your solution. Visit our vast selection of custom fiberglass parts for your classic at Rick’s Camaros today! Replace that torn or damaged rear bumper with the flex glass rear bumper replacement. Flexible to the feel, and paint to match the rest of the Camaro. Simple bolt on application Learn More

Was: $349.99 ea.

Now: $299.99 ea.
Por-15® Floor Pan & Trunk Restoration Kit Part # 88-3407-3
No welding Easy To Use Complete Kit You'll save hundreds of dollars over replacement... and your restoration will be better than replacement because you'll never see rust again. Whether it's a daily driver or a show car, you will maintain the integrity of the structure with no ugly welded seams. Repairs floor pans, trunk pans, pickup truck beds, etc. Kit includes metal cleaner, metal ready, power mesh fabric, por-15 (black) , por epoxy putty, chassis coat black, por solvent, brushes, safety mask, latex gloves, dispensing scoop and easy step by step instructions. This must be shipped via ground service. Learn More
$149.99 Kit
Power Portal Hood "Wing Vents" Black Upper & Lower With Rectangular Chrome Mesh Part # 88-3207
Fits All Makes & Models (Universal Fit) Fits Fiberglass, Steel, Aluminum, Or Carbon Fiber Hoods Sets Car Apart From Others D.I.Y. Installation With Basic Hand Tools No Body Shop Visit Or Paint Work Needed Before Or After Installation Trim Is Chrome Plated Or Powder Coated To Last Besides looking awesome in chrome or black powder coat frames with contrasting or matching stainless steel and black mesh screens, these Wing Vents move a lot of hot air out of the engine bay. Wing Vents give a great stand-alone look. And they are a great compliment to the Power Portal Hood Window. NOTE: Some cars have extensive under hood ribbing for ?air slap? (Fiberglass and Carbon Fiber hoods tend to require a very little.) Check your car prior to purchasing our Wing Vents for fit and location. Learn More

Was: $269.99 pr.

Now: $189.99 pr.
Camaro Quarter Panel, Right, 1982-1992 Part # 731305
Reproduction Of Original 30" High x 59" Long Fits Coupe & T-Top Only This Camaro reproduction quarter panel has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit, finish and function will work superbly for your restoration. In addition, using a reproduction quarter panel from Eckler's will add authenticity and value to your Camaro. Learn More
$128.99 ea.
Camaro Hood, SS Style, Fiberglass, 1982-1992 Part # 731370
High-Performance Upgrade Custom, Hand Laminated Fiberglass Hood Bolt-On Installation Ready To Sand, Prime, & Paint A Camaro fiberglass SS style hood will perfectly complement the performance look of your 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, or 1992 SS, RS, Z28, Berlinetta, or IROC-Z Camaro. The hood is the hinged cover that protects your classic’s engine and allows for easy maintenance and repair. In addition to the protection, the hood sets the style for the rest of the car to follow. This fiberglass hood is a Super Sport style model, giving your RS Camaro originality and a mean SS appearance. It is constructed of fiberglass for added performance and flair. Molded fiberglass parts allow for sleeker shapes and curves, increased gas mileage, and a more performance-oriented part. Heavy stamped sheet metal will slow your roll. Achieve peak-performance and unparalleled expression with a new custom SS style fiberglass hood for your 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, and 1992 RS Camaro. Available at Rick’s Camaro today! These are made of the finest automotive grade resins, 1-1/2 oz. mat (3 layers) and 21 mils of soft-sanding gelcoat. Stinger Fiberglass panels are wave-free because of the heavily reinforced molds which are allowed to cure 24 hours before the hoods are pulled from the molds. There are other manufacturers of Camaro hoods, but you'll find Stinger Fiberglass hoods are unequaled in the industry for consistent fit, finish and ease of installation. Attn: Please specify if your car has either TBI Carburetor or TPI Intake System Learn More
$549.99 ea.
Camaro Extreme Dimnensions Duraflex WS-6 Hood, 1982-1992 Part # 33-11932
High-Performance Hood Fiberglass Reinforced Plastic Black Primer Finish With Instruction Guide & Hardware Kit Hood Pins Recommended A Camaro Duraflex WS-6 Hood is the perfect accessory to complement your high-performance 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, or 1992 Camaro. Constructed of flexible and durable fiberglass reinforced plastic, this hood offers style and durability. This hood has a black primer finish, an included instruction guide, and all the mounting hardware you need. When in the market to mod your 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, or 1992 Camaro, invest in an Extreme Dimensions Duraflex WS-6 Hood. Available at Rick's Camaro today! Learn More

Was: $400.99 ea.

Now: $359.99 ea.
Camaro Lower Radiator Air Deflector, 1982-1995 Part # 33-12820
Restoration Correct Injection-Molded Plastic Correct Texture And Fit Correct Mounting Tabs 1982-1995 Camaro is the hottest thing at the car show and cruise in, you will find one leading the pack. Ricks Camaros offers this quality replacement Lower Radiator Air Deflector for your restoration project or part replacement. This radiator air deflector is made from high quality injection-molded plastic for a long durable, trouble free life. With correct texture and mounting tabs for easy installation. Do not trust just any replacement part for your 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995 Camaro, use only the best. Trust Ricks Camaros for all your part needs. Learn More
$95.99 ea.
Power Portal Hood "Wing Vents" Chrome Upper Chrome Lower With Rectangular Chrome Mesh Part # 88-3224
Fits All Makes & Models (Universal Fit) Fits Fiberglass, Steel, Aluminum, Or Carbon Fiber Hoods Sets Car Apart From Others D.I.Y. Installation With Basic Hand Tools No Body Shop Visit Or Paint Work Needed Before Or After Installation Trim Is Chrome Plated Or Powder Coated To Last Besides looking awesome in chrome or black powder coat frames with contrasting or matching stainless steel and black mesh screens, these Wing Vents move a lot of hot air out of the engine bay. Wing Vents give a great stand-alone look. And they are a great compliment to the Power Portal Hood Window. NOTE: Some cars have extensive under hood ribbing for ?air slap? (Fiberglass and Carbon Fiber hoods tend to require a very little.) Check your car prior to purchasing our Wing Vents for fit and location. Learn More

Was: $309.99 pr.

Now: $189.99 pr.
Camaro Quarter Panel, Left, 1982-1992 Part # 731304
Reproduction Of Original 30" High x 59" Long Fits Coupe & T-Top Only This Camaro reproduction quarter panel has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit, finish and function will work superbly for your restoration. In addition, using a reproduction quarter panel from Eckler's will add authenticity and value to your Camaro. Learn More
$128.99 ea.
Camaro Hood Pin Kit, Universal, Billet, Hotchkis, 1967-2014 Part # HD-58
Universal Fit Some Contoured Hoods May Not Be Able To Mount. Replace those old, rusty chrome hood pins on your Camaro with a pair of Ultra Trick, CNC Machined Aluminum Hood Pins from Hotchkis Sport Suspension. The Hard Annodized Finish gives a Hi Tech look to your car. The kit comes complete with Aluminum Pin, Stainless Hardware, Hood Pin Plates, and a Trick Aluminum Quick Release Pin. The Universal design makes it a great update for any Camaro. Learn More
$199.99 Kit
Items: 1 to 28 of 54 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. 3
  4. Next
Grid  |  List
1