Product Experts Available 1-800-359-7717

1996 CAMARO Z28 SUSPENSION

Search Term: 'All Parts'
Category: 'Suspension'
Vehicle: '1996 CHEVY CAMARO Z28'
Items: 1 to 28 of 47 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. Next
Grid  |  List
Best Sellers
Camaro Shock Absorber, Rear, Gas, GR-2, KYB, 1982-2002 Part # 721009
Excellent Replacement Shock Great Performance Great Price The KYB GR-2 line of shocks is one of the best replacement suspension components available. They feature the same twin tube design as the original equipment, but with heavier duty internal parts. The valving and pressures are more closely matched to the high performance suspension of your Camaro than any other replacement shock on the market. Learn More
$32.99 ea.
Camaro Shock Absorber, Rear, Gas, Mono Tube, KYB, 1982-2002 Part # 721015
Excellent Upgrade Shock Great Performance Great Price The KYB GAS-A-JUST mono tube shock is a great performance upgrade and is one of the most responsive mono tube dampers on the market. The primary advantage of a mono tube design over the original equipment twin tube is in consistency. The high pressure design eliminates the cavitations inherent to low pressure replacement shocks. They will not fade no matter how hard they are worked. KYB GAS-A-JUST shocks are backed by a limited lifetime warranty. This means you get the same great ride and efficiency- now and forever. KYB is an excellent selection for Camaro owners who demand life-long service out of a performance shock. Learn More
$49.99 ea.
Camaro Rear Lower Tubular Control Arms, 1982-2002 Part # 721601
Greatly Reduce Rear Axle Flex Improves Traction By Decreasing Wheel Hop Bolt-On Installation These Granatelli Motor Sports control arms feature 1.65" x .120 wall tubing for superior strength, polyurethane bushings and grease fittings on both ends of the bar and powder coated. Learn More

Was: $197.99 Kit

Now: $159.99 Kit
Camaro Polyurethane Sway Bar End Link Kit, 1993-2002 Part # 721218
Polyurethane Far Outlasts Stock Rubber Bushings Kit Includes Hardware Learn More
$21.99 Kit
ADDCO 1993-2002 Camaro Front Sway Bar Kit, 1-1/4" Diameter Part # 721116
Provides Dramatic Handling Improvement By Reducing Body Roll & Chassis Flex   Includes Polyurethane Sway Bar Bushings To Provide Minimal Friction & Quick, Smooth Responsiveness   End Link Bushings Are Polyurethane For Long Life   Easy To Install   Hardware Included   Learn More

Was: $299.99 Kit

Now: $228.99 Kit
ADDCO 1982-2002 Camaro Rear Sway Bar Kit, 1" Diameter Part # 721124
Provides Dramatic Handling Improvement By Reducing Body Roll & Chassis Flex   Includes Polyurethane Sway Bar Bushings To Provide Minimal Friction & Quick, Smooth Responsiveness   End Link Bushings Are Polyurethane For Long Life   Easy To Install   Hardware Included   Learn More
$199.99 Kit
Camaro Panhard Bar, Adjustable, With Polyurethane Bushing, Spohn, 1982-2002 Part # 721771
Stronger, Yet Lighter Then Stock Polyurethane Bushings (Fluted) With Grease Fittings For Easy Lubrication Right Hand & Left Hand Threaded CNC Machined Double Male Stud Adjuster Threads Into 4130 Chrome Moly TIG Welded Threaded Tube Adapters 1.25" x .095" Wall Mild Steel Tubing This Is The Highest Quality, Easiest To Adjust On The Car Panhard Bar On The Market Replace the factory's weak, stamped steel, flexible panhard bar with one of our heavy duty set-ups! Allows for centering the rearend after lowering. The best component for serious handling performance. Allows alignment of the rear for clearance when running larger tires. Greatly increases rear's lateral stability. Learn More
$169.99 ea.
Camaro Front Control Arm Bushing Kit, Black Polyurethane, 1993-2002 Part # 721088
Outlasts & Outperforms Rubber Bushings Kit Completes All Control Arms Instructions Included Polyurethane bushings eliminate unwanted front end geometry changes to give the driver better feel and control. Learn More
$47.99 Kit
Camaro Upper Control Arms, Front, Tubular, Red, With Bushings, 1993-2002 Part # 721239
1.25" x .120" wall seamless DOM tubing Greasable polyurethane bushings CNC cut 3/16" ball joint mounting plate -3 degree improved ball joint angle for lowered cars STRONGER, yet LIGHTER than stock! Fully assembled and ready to install Durable and brilliant powder coated finish Lowering the weight of your car's moving suspension parts is a great way to a more contolled and comfortable ride. Utilizing thick DOM tubing, these arms will allow your car to react much faster to changes and make your spring & shock assembly do it's job faster. Learn More
$249.99 pr.
Camaro Adjustable Torque Arm, Standard Duty, 1982-2002 Part # 721494
Attaches To The Rear Axle & Controls Rear End Torque During Acceleration, Transferring This Energy Into The Tires, Increasing Straight Line Traction Reduces Nose-Dive During Braking Eliminates Wheelhop Increases Sidebite During Corner Exit Acceleration Bolt-On System Does Not Require Complete Interior Removal As With Other Kits Provides Adjustable Pinion Angle FREE Angle Finder Included To Set Pinion Angle Constructed Of 1.25" o.d. x .120" Wall DOM Tubing Front "Stub" Of Torque Arm Is Reinforced By TIG Welding A Piece Of 1" Solid 4140 Chrome Moly Into The i.d. Of The Front Snub TIG Wwelded 4130N Chrome Moly Threaded Tube Adapters Heavy-Duty CNC Laser-Cut 3/8" Steel Rear Housing Mounting Bracket Polyurethane Bushing Front Mount For Minimal Road Noise Rear Of The Torque Arm Mounts To The 3/8" Steel Rear Housing Mounting Bracket Via Two 3/4"-16 NFT x 5/8" Bore x 7/8" Thick Solid Steel Rod Ends-These Are Solid Rod Ends, Not Spherical Bearing Rod Ends, So Noise Is Of No Concern. Grade 8 - 5/8" Bolts & 5/8" Nylock Nuts Are Used Integral 4140 Chrome Moly Pinion Angle Adjuster Between The Bottom Rear Solid Rod End & The Bottom Rear Torque Arm Tube Allows For Easy Pinion Angle Adjustment-A Simple Turn Of The Wrench Will Give You 6 Degrees Of Pinion Angle Adjustment, It's That Simple Entire Package Is A Complete Bolt-In Assembly Using Existing Mounting Points On The Vehicle-No Drilling Or Welding Is Required This Is A Proven Product Being Run On Some Of The Fastest F-Bodies In The Country Rear Mounting Bracket Is Designed To Fit On OEM & /Or Aftermarket Rear Ends Replace your flimsy factory torque arm with a durable Spohn tubular version and put the power where it belongs - the pavement! Built from 1.25" x .120" DOM tubing with a heavy-duty 3/8" thick rear mounting bracket. Bolts directly in place of the factory torque arm using all factory mounting locations. Requires no welding or drilling. Equipped with an adjuster for changing pinion angle and a new, low deflection polyurethane front bushing. 1982-1992 cars require the use of a factory torque arm bushing clamshell mount designed for Prothane bushing 7-1609. If your vehicle is equipped with a 7-1611 type bushing, you will need to get the 7-1609 type clamshell (See above pictures). This does not apply to 1993-2002 cars. Learn More
$409.99 ea.
Camaro Panhard Bar, Adjustable, With Spherical Rod End & Polyurethane Bushing, 1982-2002 Part # 721770
1.25" x .095" Wall DOM Tubing Stronger, Yet Lighter Than Stock TIG Welded 4130N Chrome Moly Threaded Tube Adapters 3/4" Chrome Moly Spherical Rod End With Teflon® Self-Lubricating Race CNC Machined Through Sleeve & Zinc Plated Steel Spacers Keep Rod End Perfectly Centered Inside Of The Vehicle Mounting Bracket Polyurethane Bushing (Fluted) With Grease Fitting For Easy Lubrication Right Hand & Left Hand Threaded Male/Female CNC Machined 4140 Chrome Moly Adjuster Provides For Easy On-Car Adjustment Reuses OEM Mounting Hardware, No Need To Drill Out Your Car's Mounting Brackets Replace the factory's weak, stamped steel, flexible panhard bar with one of our heavy duty set-ups! Allows for centering the rearend after lowering. The best component for serious handling performance. Allows alignment of the rear for clearance when running larger tires. Greatly increases rear's lateral stability. The high quality spherical rod end provides for "bind-free" handling performance. The fluted polyurethane bushed end is mounted onto the chassis (floor) mount to absorb road noise. This combo ended Panhard Bar will still wipe out most bind, yet keep the noise level increase minimal for a street driven car. All of our spherical rod ended components come equipped with extra high strength, chrome moly rod ends with Teflon® self lubricating race. When shopping around for spherical rod ended components, do not shop on price alone. The lower grade rod ends (which are much cheaper) will not hold their tolerances like the premium rod ends we utilize, this will cause substantial amounts of noise in a short time. We have had to increase our prices, but it is money very well spent in the long run, these rod ends will last a very long time. Learn More
$189.99 ea.
Camaro Strut, Front, Gas, KYB, 1993-2002 Part # 721016
Excellent Replacement Strut Great Performance Great Price This KYB high pressure gas strut is an excellent high performance replacement for 1993-02 Camaros. In terms of performance, KYB's are "guaranteed" not to fade. In fact, regardless of how much or how hard the strut is worked, the KYB strut still provides 100% shock absorbing efficiency now and forever. The KYB mono-tube is backered by a limited lifetime warranty. KYB is an excellent selection for Camaro owners who demand life-long service out of a performance shock. Learn More
$159.99 ea.
Camaro Rear Control Arm Bushing Set, Polyurethane, 1982-2002 Part # 721092
Outlasts & Outperforms Rubber Bushings Instructions Included Polyurethane bushings eliminate unwanted rear end geometry changes to give the driver better feel and control. Learn More
$57.99 Set
Camaro Polyurethane Total Body & Suspension Kit, 1993-2002 Part # 721138
Far Superior In Strength To Rubber Far Outlasts Stock Rubber Components Improves Ride & Handling It is time to take advantage of matched components that not only will improve your ride but also will work together for maximum performance.  Kit Includes:     Rear Control Arm     Torque Arm     Front Upper & Lower Control Arm Bushings     Sway Bar Bushings     Sway Bar End Links     Tie Rod Boots     Transmission Mount Learn More
$244.99 Kit
Camaro Coil Spring Set, Hotchkis, 1993-2002 Part # 721803
Replacement Performance Spring Set (4) Lowers Car 1" Below Stock Ride Height Powder Coated Dark Gray Learn More

Was: $349.99 Set

Now: $329.99 Set
Camaro Coil Springs, V8, LT1 Sportline, Eibach, 1993-1997 Part # 721960
Provides Excellent Handling And Control Will Lower Vehicle Approximately 1.8 Inches Provides A Firm Stable Base For Aggressive Street Or Road Course Driving Fits All 1993-1997 LT1 V8 Cars If you want your car to look great, lower it and remove that hideous wheel to fender gap. Eibach has engineered the perfect spring set to lower your car 1.5 to 2 inches at all four corners. NOTE: Lowering your car changes the rear control arm angles. Please consider our lower control arm relocation brackets, and an adjustable torque arm. Learn More
$269.99 Set
Camaro Coil Springs, Eibach, 1993-2002 Part # 721765
Provides Excellent Handling & Control Will Lower Vehicle 1" From Stock Ride Height Provides A Firm Stable Base For Aggressive Street Or Road Course Driving  SLP wanted a set of springs to keep the F-body at a reasonable height, and still have good corner carving charateristics. Eibach answered the call and their collaboration resulted in the best all around spring set for 93-02 Cars. If you would like to go lower, please see P/N 721953. Learn More
$359.99 Set
Camaro Coil Springs, V6 Pro-Kit, Eibach, 1993-2002 Part # 721953
Provides Excellent Handling And Control Will Lower Vehicle 1.4" From Stock Ride Height Provides A Firm Stable Base For Aggressive Street Or Road Course Driving If you want your car to look great, lower it and remove that hideous wheel to fender gap. Eibach has engineered the perfect spring set to lower your car 1.5 to 2 inches at all four corners. NOTE: Remember: Lowering your car changes the rear control arm angles. Please consider our lower control arm relocation brackets, and an adjustable torque arm. Learn More
$269.99 Kit
Camaro Shocks & Struts, Bilstein, SLP, 1993-2002 Part # 721761
The Ultimate Non-Adjustable Dual-Purpose Shock Ideal For Daily Use Or Ocassional Track Time Includes Two Front Struts & Two Rear Shocks These shocks are built to SLP's specifications by Bilstein and are for use in road racing applications. They give excellent control for daily driving and provide a competitive edge on the road course. The shocks are valved to produce a comfortable, yet firm ride on the street. They also perform like a race shock during road course maneuvers. The ultimate in a non adjustable dual-purpose shock. Learn More
$599.99 Set
Camaro Spohn Steel Tubular K-Member, For LT1 Engines, 1993-1997 Part # 721756
CNC laser cut and formed 3/16" steel a-arm mounts, solid welded inside and outside. Outside welds are sanded smooth to allow for a flush fit to the car, eliminate stress risers, and provide a clean and smooth professional appearance All a-arm mounts are gusseted front and rear for side load strength. The slots have been lengthened to provide more a-arm adjustment over the stock k-member. Recessed passenger's side rear a-arm mount to provide clearance for long tube headers. Rear a-arm mount boxes are offset bent just like the factory k-member for factory exact fit and finish CNC laser cut and formed reinforced 3/16" steel rack mounts Welded in a special built rotary jig to insure an exact fit and allow for precision welds entirely in the flat position Includes (6) new 12mm Grade 10.9 k-member mounting bolts and heavy flat washers Includes (8) new flanged head motor mount bolts & flanged head steel lock nuts Includes all five brake line mounts and new brake line mounting tab bolts & nuts Spohn Performance's tubular k-member sets a new, higher standard of performance and quality. When we designed our k-member, we had several goals in mind. One was to provide the performance capabilities needed for the toughest race tracks, another was to provide the strength and durability required for the demands of a daily driven vehicle. Our k-member provides substantial weight savings and frees up a lot of room in the engine bay for our drag race customers, but it also provides the strength, rigidity, and durability for our road race, autox, and daily driver customers as well..... all in one package! Spohn's tubular k-member features gusseted a-arm mounts for maximum rigidity and side load support. Our k-members are gusseted in critical areas (over 20 locations!) to ensure that a weld never breaks. They decrease overall weight, and provide much more room for large tube headers, turbo systems, etc. Our k-member will accept stock a-arms, or for additional weight loss and performance enhancement we also offer tubular a-arms (click here). Our jig was built around the factory k-member providing for an exact fit and factory exact dimensions. Every detail of the factory k-member was incorporated, including all five brake line mounts. There's no "zip tying" of the brake lines with our k-member. Learn More
$649.99 ea.
Camaro Lower Control Arms, With Rod End Bushings, Front, Tubular, 1993-2002 Part # 721240
1.25" x .120" wall seamless DOM tubing Ball joint cups are CNC machined from 2.75" o.d. x .375" wall seamless mechanical tubing Greasable ball joints (installed) TIG welded 4130 chrome moly threaded tube adapters CNC machined through sleeve and zinc coated steel spacers keep rod ends perfectly centered inside of the k-member mounting bracket CNC cut and formed 3/16" shock mount Formed .125" sway bar end link mounts Durable and brilliant powder coated finis Grade 8 shock mounting hardware included Fully assembled and ready to install STRONGER, yet LIGHTER than stock Weight is the name of the game when it comes to suspension parts. These arms are stronger and much ligter than stock ones. They feature new greasable ball joints, and spherical rod ends. Your car will be much easier to service and align. Learn More
$499.99 pr.
Camaro Anti-Sway Bar, Rear, Adjustable 15/16", Hotchkis, 1993-2002 Part # 721906
Durable, Gloss Black Powder Coat Finish Bolt-In installation requires no vehicle modifications Contains all necessary mounting and links Includes Greasable Polyurethane Bushings, and Mounts Now you can fine tune the handling of your 1993-2002 Camaro with the new bolt-in Hotchkis Adjustable Rear Sway Bar. Three adjustment settings – 225, 240 and 255 lbs/in can be selected by simply moving the included heavy duty end links into the desired adjustment hole at thend of the 15/16” tubular steel sway bar. The result is maximum adjustability, control and driver feedback with the ability to dial-in the way the car responds to throttle steer and how it reacts to driver input. Mounts, greasable Polyurethane bushings and complete installation instructions are included. Learn More

Was: $389.99 Set

Now: $349.99 Set
Camaro QA1 Spanner Wrench Thrust Bearing Kit, 1967-2002 Part # 721715
For Use With QA1 Coil Over Suspension Includes One Spanner Wrench & Two Bearings Learn More
$57.99 ea.
Camaro Sway Bar Bushing Kit, 30mm, Urethane, 1993-1997 Part # 721234
Optimizes Full Benefit Of Stock Sway Bars Provides Instantaneous Sway Bar Repsonse Outlasts Factory Rubber Bushings The sway bar (anti-roll bar) on any car is one of the most important elements in providing great handling. By reducing body roll, you improve the tires contact to the pavement for improved handling. To maximize your factory sway bars performance, upgrading to polyurethane bushings greatly reduces bushing distortion and binding found in rubber bushings. These features reduce body roll and increase steering responsiveness to steering commands for a crisper, better handling car. To further improve your Camaro's handling, up-sizing of your sway bars will further reduce body roll, improved steering crispness and improve handling. Learn More
$11.99 Kit
Camaro Sway Bar Bushing Kit, 32mm, Urethane, 1993-1997 Part # 721233
Optimizes Full Benefit Of Stock Sway Bars Provides Instantaneous Sway Bar Repsonse Outlasts Factory Rubber Bushings The sway bar (anti-roll bar) on any car is one of the most important elements in providing great handling. By reducing body roll, you improve the tires contact to the pavement for improved handling. To maximize your factory sway bars performance, upgrading to polyurethane bushings greatly reduces bushing distortion and binding found in rubber bushings. These features reduce body roll and increase steering responsiveness to steering commands for a crisper, better handling car. To further improve your Camaro's handling, up-sizing of your sway bars will further reduce body roll, improved steering crispness and improve handling. Learn More
$11.99 ea.
Camaro Coil-Over Kit, Rear, Double Adjustable, QA1, 1982-2002 Part # 721842
CNC Laser Cut Upper Mount Reinforcing Plates (Minor Welding Required) QA1 24-Way Double Adjustable Forged Aluminum Shocks 150 lb. Springs Grade 8 Hardware Torrington Spring Bearings & Thrust Washers Kevlar/Teflon Shock Mount Bearings For Years Of Bind-Free Operation Spanner Wrench Included For Easy Ride-Height Adjustments Coil-Over suspension will make your Camaro react faster to uneven pavement, grooved highways, or bumpy tracks. QA1's doulb adjustable shocks have 24 adjustments for compression and rebound, with seperate knobs for each. Optimize each side for better launches, braking weight transfer, or nasty speed bumps. This shock & spring assemblies ship (by ground) fully asembled. Just weld in the upper 1/4" reinforcing plates and you are ready to go. Learn More
$899.99 Kit
Camaro Front Upper Control Arms, Tubular, Red, With Rod Ends, 1993-2002 Part # 721488
1.25" x .120" Wall Seamless DOM Tubing 3/4" Chrome Moly Spherical Rod Ends With Teflon® Self Lubricating Race CNC Machined Sleeves & Zinc Coated Steel Spacers Keep Rod Ends Perfectly Centered Inside Of Their Brackets Rod Ends Allow Additional Alignment Adjustability CNC Cut 3/16" Ball Joint Mounting Plate -3 Degrees Of Caster For Better Steering Response  Durable & Brilliant Powder Coated Finish Fully Assembled & Ready To Install Much STRONGER & Lighter Than Stock Powder Coated Red Lowering the weight of your car's moving suspension parts is a great way to a more contolled and comfortable ride. Utilizing thick DOM tubing, these arms will allow your car to react much faster to changes and make your spring & shock assembly do it's job faster. Learn More
$389.99 pr.
ADDCO Camaro Rear Sway Bar, 7/8" Diameter, 1982-2002 Part # 721125
Provides Dramatic Handling Improvement By Reducing Body Roll & Chassis Flex   Includes Polyurethane Sway Bar Bushings To Provide Minimal Friction & Quick, Smooth Responsiveness   End Link Bushings Are Polyurethane For Long Life   Easy To Install   Hardware Included   Learn More
$228.99 Kit
Items: 1 to 28 of 47 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. Next
Grid  |  List
4