Product Experts Available 1-800-359-7717

1998 CAMARO STANDARD TRANSMISSION AND DRIVELINE

Search Term: 'All Parts'
Category: 'Transmission and Driveline'
Vehicle: '1998 CHEVY CAMARO STANDARD'
Items: 1 to 28 of 43 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. Next
Grid  |  List
Best Sellers
Camaro Transmission Mount, Polyurethane, Fits All Transmissions, 1967-2002 Part # UR-3
Replacement Transmission Mount Comes In Black Or Red Fits All Transmissions Polyurethane Far Outlasts Stock Rubber Mounts Decreases Driveline Deflection Superior In Strength To Rubber Zinc Plated Mounting Bracket Included Includes All Bushings & Hardware Sold Individually (2 Required Per Car) Made In The USA Fits 1967-2002 Camaro Models The motor and transmission mounts in your 1967-2002 Camaro will need to be replaced after approximately every 50,000 miles, or if they become soaked from fluids like oil several times. From excessive use and abuse, the motor mounts get weak and will not secure your engine properly. The rear transmission mount holds the transmission to the Camaro crossmember and provides the proper driveline angle between the transmission and the rearend differential. Original rubber mounts can flex causing premature wear on the transmission and rearend if you use your Camaro for occasional, “spirited” driving. The motor and transmission mounts on your Chevy Camaro are crucial for reducing vibration and extending the life of your engine and its components. If your mounts break or grow weak, it can be dangerous since this can allow the engine to shift, possibly sticking the accelerator in a full throttle position or causing the engine to push the fan into the radiator or fan shroud. Rick's Camaros is happy to offer this new polyurethane transmission mount for your F-Body’s engine. Fitting either the driver’s or passenger’s side, this steel mount is sold individually, has polyurethane bushings, and includes a zinc plated mounting bracket for easy installation. This will help to reduce any wheel hop or traction loss, provide maximum transmission support, and reduce driveline deflection. Don’t wait to stay safe and comfortable in your Chevrolet. From racers, show cars, hot rods, and daily drivers, you can trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993 ,1994 ,1995, 1996, 1997, 1998, 1999, 2000, 2001, or 2002 Camaro! Learn More
$34.99 ea.
Camaro Clutch Roller Pilot Bearing, 1967-2002 Part # 708133
Stock Replacement For 1984-02 Upgrade For 1970-83 Models Roller-Type Bearing Learn More
$17.99 ea.
Camaro Skip Shift Eliminator, For 6-Speed Transmissions, 1993-2002 Part # 719586
Caps Ends Of Disconnected CAGS Harness Prevents Fouling/Corrosion Enables Re-Hookup Works With All 1993-2002 F-Bodies   Decide for yourself what gear you want to be in! Dump that annoying first-to-fourth "skip-shift" GM incorporates into the 6-speed Camaro with the Skip-Shift Eliminator. This plug in piece requires no additional modifications to your vehicle. With it in place, you take complete control over gear selection. Isn't that why you got a 6-speed? Plug in installation. Shipped complete with everything you need including easy installation instructions. Not legal for use on pollution controlled motor vehicles. Learn More
$24.99 ea.
Camaro Rear Axle Bumper, Left Or Right, 1982-2002 Part # 721801
Restoration Correct Original GM Part This stock replacement rear axle bumper  for your 1982-2002 Camaro is manufactured by GM or by one of its authorized suppliers and offered by Ricks Camaros for use as a factory replacement part. You will find the fit, finish and function meets all GM specifications. Using stock replacement parts from Eckler's, such as this rear axle bumper, is a sound investment in the restoration or repair of your 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 Camaro. Trust Ricks Camaros for all your parts needs. Learn More
$65.00 ea.
Camaro Automatic Transmission Shifter Lock, 1984-2002 Part # 719068
Installs In Seconds Denies Access To Shifter Release Button Serves As A Visual Deterrent Too Lock Pictured On A 2002 Corvette May Not Fit All Aftermarket Shift Knobs Give your Camaro added security with this easy-to-use shifter lock. It has a hardened cast aluminum case, heavy-duty lock and tumbler and a case hardened steel lock pin to make this unit virtually indestructible. Learn More
$39.99 ea.
Camaro Driveshaft, Aluminum, Heavy-Duty, 1982-2002 Part # 721538
Lighter & Stronger Than Original Shafts High Speed Balanced Fits Automatic & Manual Transmission Cars Driveshafts deliver power, consuming some of it in the process. A new aluminum shaft from Inland Empire Drive Line Service will reduce this power loss and run smoother than the mass production, aging and usually rusty original driveshaft. This driveshaft is complete, balanced and ready to install. It is a 3 inch diameter .125 wall auminum tube., aluminum weld yokes, steel u-joints and a transmission yoke. They are intended to be direct replacements for the stock steel driveshafts in cars up to 500 horse power using street tires on the street. Learn More
$439.99 ea.
Camaro T Handle, With Switch, Hurst Competition, 1967-2002 Part # 719029
3/8"-16 Thread New Snap Action Button & Switch For Instant Activation Ideal for use with Hurst Roll Control, transmission brakes, Nitrous Oxide systems or any other 12 volt accessories. Learn More
$58.99 ea.
Camaro Shifter, Billet, 5-Speed, With Black Stick, Hurst, 1983-2002 Part # 719108
Outperforms Stock Shifters Shifts Faster & Smoother Bolt-On Installation Hardware & Instructions Included Learn More
$279.99 ea.
Camaro Fidanza Flywheel & Clutch Combo Qwik-Rev Kit, V1, 1998-2013 Part # 33-10937
Complete Set To Save $ LS1/LS6 Style Clutch, 26-Spline Disc: 26 x 1-1/8" Designed For Hi-Performance Street Use Made In USA Fidanza Qwik-Rev combos shift performance into high gear! These perfectly matched combos pair Fidanza premium 6061 T6 aluminum flywheels and their great performing V-Series clutches for lightweight strength that delivers! Faster acceleration, quicker throttle response, and increased clutch efficiency are some of the speedy results you'll experience. These durable combos are available with a V1 solid organic clutch disc for your high-performance street machine (33-10937), or with their V2 6-puck ceramic clutch disc for your higher horsepower/torque and race applications (33-10938). Fidanza engineers have done their homework to develop a dynamic duo that gets additional horsepower to your wheels and adds more excitement to your driving. Qwik-Rev clutch and flywheel combos offer a shift in performance! Learn More
$849.99 Kit
Camaro Transmission Mount, Urethane, Rear, 1982-2002 Part # 33-00214
Great Upgrade For Your Camaro! Urethane Construction Retains Correct Transmission Location Increased Durability Over Rubber Mounts 1982-2002 Camaro is great for building that awesome street machine, with ton of horsepower. Ricks Camaros offers this durable Transmission Mount, Urethane, Rear for your ride. Polyurethane is an ideal material for performance suspension bushings, motor and transmission mounts. Don't get us wrong, rubber suspension bushings and mounts are a proven compromise. However, additional horsepower, plus size tires, lifted truck suspension or lowered canyon carving street setups all mix with normal atmospheric conditions and undercar grit and grime to stress rubber bushings beyond design limits. Don't settle for just any replacement part for your 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 Camaro, use only the best parts. Trust Ricks Camaros for all your part needs. Learn More
$47.99 ea.
Camaro Clutch Kit, LS1, Ram Clutches, 1998-2002 Part # 708122
Performance Replacement Clutch Kit HDX Clutch sets are the performance upgrade for your daily driver/hot rod. Ram Pressure plates feature increased clamp loads and the 200 Series organic clutch disc provide maximum holding power. Rams 200 series discs use a premium organic facing material that greatly increases rotational strength. Use HDX sets for cars with bolt on modifications and mild power enhancements, for street or strip. Learn More
$429.99 Kit
Camaro Manual Shift Boot Ring, 1997-2002 Part # 33-12945
Restoration Correct Made From Durable Material Correct Tabs For Installation Damage Often Occurs During Transmission Removal 1997-2002 Camaro is a classic with the car show and street scene crowds. Ricks Camaros offers this correct Manual Shift Boot Ring, for your restoration project or part replacement. This shift boot ring, is made from durable material, to stand up to years of use. This shift boot ring is often damaged during removal when removing the transmission, during clutch service or other repairs. Do not settle for just any replacement part for your 1997, 1998, 1999, 2000, 2001, 2002 Camaro, use only the best replacement parts. Trust Ricks Camaros for all your part needs. Learn More
$47.99 ea.

New!

Camaro Flywheel Bolts, LS1, 1998-2002 Part # 719599
Replacement High Performance Flywheel Bolts Includes Six Grade 8 Bolts With Washers Learn More
$45.99 Set
Camaro Clutch Pressure Plate Bolts, LS1, 1998-2002 Part # 719598
Replacement High Performance Bolts & Hardware Includes Six Grade 8 Bolts With Washers Learn More
$27.99 Set
Camaro Rear End, 9", Complete, With Wilwood Disc Brakes & Lines, 1982-2002 Part # 721832
Super Durable Brand New 9" Ford Rear Axle With Torque Arm Mount New Big-Bearings, Torino Flanges & 31-Spline Axles All Spring Perches, Tabs & Brackets Welded Into Place Specify Drum-To-Drum Width, Spring Perch Center To Center, & Bolt Pattern When Ordering Wilwood 12.19" Black Rotors & 4 Piston Black Calipers, 1/2" Studs New Tru Trac Positraction Superlight Nodular Third Member In Your Desired Ratio New Pinion Yoke, Bearings, Studs, Seals, Housing Vent & Hardware Bolt In, Bleed The Brakes, & Go! No ABS Brake Provisions The rear ends are the weak link in all 3rd and 4th gen cars. The housings are built 64-5/8" wide (1993-02 Cars) but are a direct swap for 1982-92 cars if used with late model wheel backspacing. NOTE: For all residential deliveries, there will be an additional charge for delivery via liftgate truck. These Rear Ends Have Do Not Have Provisions For ABS Anti-Lock Brakes Learn More
$3,399.99 ea.
Camaro Shifter, 6-Speed, B&M, 1993-2002 Part # 719597
Reduces Shifter Throw By 30% Provides Smooth, Precise Shifts Machined From 303 Stainless Steel & 6061-T6 Aluminum Direct Bolt-On Installation Looking for a stout manual shifter for your Camaro? You've found it! This B&M Shifter is engineered to substantially shorten the shifter throw in your late model Camaro. Smooth, precise shifts along with extremely durable components will provide trouble-free shifts for thousands of miles. CNC (Computer Numerically Controlled) machined from 303 stainless steel and 6061-T6 aluminum, this shifter will provide the type of strength and performance you demand. Learn More
$249.99 ea.
Camaro Clutch Assembly, Ram Force 10.5 Dual Disc,1998-2011 Part # 791033
11" Clutch 1 1/8" - 26 Spline Disc Includes Installation Tool 1998-11 Requires The Purchase of Flywheel P/N 708124 The RAM Force 10.5 has a strap driven floater plate for completely quite operation and works well for high horsepower street only cars and trucks. Featuring 300 series friction material, the clutch is smooth engaging and yet conservatively rated at 900 ft/lbs holding capacity Learn More
$1,499.99 Kit
Camaro Clutch Assembly, Ram Powergrip,1998-2011 Part # 791029
11" Clutch 1 1/8" - 26 Spline Disc Includes Installation Tool 1998-11 Requires The Purchase of Flywheel P/N 708124 As engine power and torque levels increase, Powergrip Clutch sets meet the challenge. Powergrip utilizes a unique blend of 900 and 300 series friction materials and increased clamp loads to give you the holding power needed for aggressive street driving, occasional drag strip use, and the all around performance you expect from your clutch system. Some chatter will occur on takeoff. Use Powergrip for modified street/strip cars. Learn More
$557.99 Kit
Camaro Clutch Assembly, Ram Force 9.5 Dual Disc,1998-2011 Part # 791032
11" Clutch 1 1/8" - 26 Spline Disc Includes Installation Tool 1998-11 Requires The Purchase of Flywheel P/N 708124 The RAM Force 9.5 has a strap driven floater plate for completely quite operation and works well for high horsepower street only cars and trucks. Featuring 300 series friction material, the clutch is smooth engaging and yet conservatively rated at 800 ft/lbs holding capacity Learn More

Was: $999.99 Kit

Now: $949.99 Kit
Camaro Clutch Assembly, Ram Powergrip HD,1998-2011 Part # 791031
11" Clutch 1 1/8" - 26 Spline Disc Includes Installation Tool 1998-11 Requires The Purchase of Flywheel P/N 708124 Powergrip HD sets are the ultimate for extreme street/strip performance. Using our proprietary 900 series friction material in conjunction with increased clamp load pressure plates, you get maximum holding power for track or street, with only minimal reduction in driveability. This is the set for big power street cars! Some chatter will occur on takeoff. Due to the 900 series disc in these kits we highly recommend the use of our RAM billet steel FlywheelP/N 55728. Use of the factory nodular iron (explosion resistant) flywheels will cause excessive wear on the flywheel Learn More
$599.99 Kit
Camaro Clutch Pilot Bushing, 1970-2002 Part # 708134
Replacement Pilot Bearing This Camaro replacement clutch pilot bearing has been manufactured to meet or exceed factory specifications and performance. You will find the fit and function will work perfectly for your Camaro. You will also be pleased to know that Eckler's has sourced this clutch pilot bearing among other possible parts as the best choice for your repair or restoration project. Learn More
$4.99 ea.
Camaro Fidanza Flywheel & Clutch Combo Qwik-Rev Kit, V2, 1998-2013 Part # 33-10938
Complete Set To Save $ LS1/LS6 Style Clutch, 26-Spline Disc: 26 x 1-1/8" V2 Sprung Hub, 6-Puck Ceramic For Higher Horsepower / Torque & Race Applications Made In USA Fidanza Qwik-Rev combos shift performance into high gear! These perfectly matched combos pair Fidanza premium 6061 T6 aluminum flywheels and their great performing V-Series clutches for lightweight strength that delivers! Faster acceleration, quicker throttle response, and increased clutch efficiency are some of the speedy results you'll experience. These durable combos are available with a V1 solid organic clutch disc for your high-performance street machine (25-11761), or with their V2 6-puck ceramic clutch disc for your higher horsepower/torque and race applications _25-11762). Fidanza engineers have done their homework to develop a dynamic duo that gets additional horsepower to your wheels and adds more excitement to your driving. Qwik-Rev clutch and flywheel combos offer a shift in performance! Learn More
$799.99 Kit
Camaro Hurst Manual Shifter, Billet Plus, 1993-2002 Part # 33-11787
Billet Plus Manual Shifter Black Billet Aluminum Base And Stop Collar Heat Treated Steel Gear Select Adjustable Positive Gear Stops Stainless Steel Rotating Pivot High Ratio Pivot Mechanism Gold Anodized Base 8.5" Shifter Lever Length 30% Throw Reduction Ball NOT Included, Black Stick A Camaro Billet Plus shifter is the perfect upgrade for your 1993-2002 Camaro. Hurst Billet/Plus Shifters incorporate a high ratio pivot mechanism for reduced shifter throw and are sturdily constructed for a more positive precise feel when shifting. Self centering alignment improves 2nd to 3rd up-shift gear changes to reduce the chance of missed shifts. Patented adjustable bias spring loads on most models allow stick tension to be tailored to drivers preference. When looking to mod your classic Camaro, invest in a Hurst Billet Plus shifter! Applicable On: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 Learn More
$260.99 ea.
Mantic Street Series Single Disc Clutch Kit, 1998-2002 Part # 33-10664
Replacement Clutch Kit Comes With Every Part Needed In Typical Clutch Jobs For Camaros With A LS1 Engine Is it time to replace that old clutch? Get this complete kit to make installation a breeze, saving time and effort. Includes: Pressure Plate, Clutch Disc, Lightened Steel Flywheel and Release Bearing all in a branded wooden ammo case. Learn More
$759.99 Kit
Camaro Hurst Manual Shifter, Billet Plus, Chrome, 1993-2002 Part # 33-11788
Billet Plus Manual Shifter Billet Aluminum Base And Stop Collar Heat Treated Steel Gear Select Adjustable Positive Gear Stops Stainless Steel Rotating Pivot High Ratio Pivot Mechanism Gold Anodized Base 7.96" Shifter Lever Length 3/8-16" Ball Black Ball Included, Chrome Stick A Camaro Billet Plus shifter is the perfect upgrade for your 1993-2002 Camaro. Hurst Billet/Plus Shifters incorporate a high ratio pivot mechanism for reduced shifter throw and are sturdily constructed for a more positive precise feel when shifting. Self centering alignment improves 2nd to 3rd up-shift gear changes to reduce the chance of missed shifts. Patented adjustable bias spring loads on most models allow stick tension to be tailored to drivers preference. When looking to mod your classic Camaro, invest in a Hurst Billet Plus shifter! Applicable On: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 Learn More
$270.99 ea.
Camaro Flywheel, LS1, Billet Steel, Ram Clutches, 1998-2002 Part # 708125
Replacement Billet LS1 Flywheel RAM billet steel flywheels are recommended as a replacement for factory cast flywheels in high performance and racing vehicles. Cast flywheels are not explosion proof and can be dangerous when used in high performance applications at higher RPMs. Learn More

Regular Price: $359.99 ea.

Sale Price: $241.25 ea.

Camaro AC Delco, Clutch Pilot Bearing, 1982-2002 Part # 33-11546
Restoration Correct Original AC Delco Part Correct Fit And Finish Fits V8 Engines Also Fits IROC-Z 90, RS 92, Z28 91-00 Made In USA When replacing the clutch assembly on your 1982-2002 Camaro, don't forget to replace that Clutch Pilot Bearing, located in the end of the crankshaft. Ricks Camaros offers this quality AC Delco replacement bearing. The clutch pilot bearing connects the manual transmission input shaft to the engine crankshaft. The bearing allows the input shaft to rotate independently of the crankshaft. Don't sacrafice quality parts for your 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 Camaro. Trust Ricks Camaros for all your parts needs. Learn More
$15.99 ea.
Items: 1 to 28 of 43 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. Next
Grid  |  List
3