Product Experts Available 1-800-359-7717

2001 CAMARO SS EXHAUST

Search Term: 'All Parts'
Category: 'Exhaust'
Vehicle: '2001 CHEVY CAMARO SS'
Items: 1 to 28 of 43 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. Next
Grid  |  List
Best Sellers
Insulating Exhaust Wrap Part # 88-0173-1
Reduces Under-Hood Temperatures up to 70% Increases Horsepower & Fuel Efficiency Withstands Heat up to 2000 Degrees  The original Exhaust Insulating Wrap was developed over 12 years ago by Thermo-Tec. Exhaust Insulating Wrap is an innovative way to create more horsepower and reduce under-hood temperatures. Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust scavenging is produced, along with lower intake temperatures. Exhaust Insulating Wrap withstands continuous heat up to 2000°F, and contains no asbestos. Thermo-Tec exhaust wrap will not over-insulate a system when properly installed due to a proprietary coating developed by Thermo-Tec - Thermal Conduction Technology (TCT) - that conducts heat across the wrap's surface. This coating controls heat build-up and dissipation. Just wrap it around your exhaust pipe and secure with lock ties P/N 88-0174-1. Protect wrap with Hi-Heat Coating spray P/N 88-0175-1. Wrap roll is 50' x 2" & 1/16" thick, which is enough to cover one header or exhaust pipe.   Learn More
$51.99 rl.
Exhaust Wrap, Stainless Steel Locking Ties Part # 88-0174-1
Cut-To-Length Narrow To Fit In Tight Locations Easy Slide-Through Fasteners To secure your Exhaust Wrap use, Stainless Steel Locking Ties. For primary tubes use 9-inch, for collectors use 18-inch. The ties can be used anywhere there is extreme heat (up to 2500 F). Learn More
$34.99 Kit
Calyx Exhaust Manifold Dressing Part # 88-0260-3
To keep your cast iron exhaust manifolds looking concours prepared perfect, use Calyx Manifold Dressing. It applies with a flannel cloth and polishes to a silver shine in seconds. After the manifold is prepared with calyx, apply when necessary, very little upkeep is required. Application of the dressing does not require removal of the manifolds. Calyx Manifold Dressing will not burn and is non-toxic. One container, 3 ounces, will do 3 sets of cast iron exhaust manifolds. Learn More
$18.99 ea.
Camaro Exhaust Muffler Clamp, Steel, 2-1/4", 1967-2011 Part # RC-109
Replacement Clamp This Camaro replacement exhaust muffler clamp has been manufactured to meet or exceed factory specifications and performance. You will find the fit, finish and function will work perfectly for your Camaro. You will also be pleased to know that Rick's has sourced this exhaust muffler clamp among other possible parts as the best choice for your repair or restoration project. Learn More
$3.99 ea.
Camaro Exhaust System, 3" Non-Adjustable Cat Back, Borla,V8, 1998-2002 Part # 724023
Delivers Performance Sound Improves Exhaust Flow & Performance Bolt-On Installation Borla has always set the standard for great exhaust sound and improved performance. This system is made of aircraft quality T-304 stainless steel. T-304 is the highest quality and most resistant to corrosion. Like all Borla T-304 systems, it is backed by the only million mile warranty in the business. Learn More

Was: $759.99 Kit

Now: $699.99 Kit
Camaro Exhaust System, Power-Pulse, With Pro-Series 3-1/2" Tips, CORSA, 1998-2002 Part # 724479
Adds 14 Rear Horsepower 100% More Flow Than Stock Exhaust 3" Aircraft Grade Stainless Steel Mandrel Bent Tubing Bolt-On Installation 50 States Emission Legal Life-Time Guarantee For more than five years, C5 Corvette owners have made CORSA's Power-Pulse RSC exhaust systems their choice because of CORSA's unequaled performance, robust sound and flawless appearance. This same patented, straight-through Reflective Sound Cancellation technology is now availabe for fourth-generation Camaros. The CORSA Pro-Series Exhaust provides the most muscular sound around without the interior head-pounding resonance in the interior of the vehicle. CORSA's Power-Pulse RSC systems are handcrafted out of 100% aircraft quality stainless steel and have no packing material or baffles to wear out. CORSA's stunning, polished dual Pro-Series Tips will enhance your Camaro's appearance from any angle. Learn More
$1,229.99 Set
Camaro Exhaust System, 3" Cat Back Adjustable, V8, Borla, 1998-2002 Part # 724019
Delivers Performance Sound Improves Exhaust Flow & Performance Bolt-On Installation Borla has always set the standard for great exhaust sound and improved performance. This system is made of aircraft quality T-304 stainless steel. T-304 is the highest quality and most resistant to corrosion. Like all Borla T-304 systems, it is backed by the only million mile warranty in the business. Learn More

Was: $989.99 Kit

Now: $899.99 Kit
Camaro Exhaust System, B&B, LS1 V8, 1998-2002 Part # 724441
T304 Stainless Steel Quad 4.5" Polished Tips T304 stainless steel construction and the great design by Billy Boat to make your Camaro look and sound like it should. Not only look great but increase in horsepower and torque come along with this new system. Learn More

Was: $999.99 Kit

Now: $799.99 Kit
Camaro Modular Resonator & Muffler Loud Mouth II, 1998-2002 Part # 724468
Get maximum flexibility from your modular SLP cat-back system with our new Loud Mouth II® bullet race muffler. It offers flow and performance similar to that of our original Loud Mouth® resonator but features a ceramic-wrapped, perforated core that reduces high-frequency noise and in-car resonance. Each Loud Mouth II® muffler is constructed from hand-polished stainless steel and embossed with the classic SLP logo. MEASUREMENTS: 3" ID/OD 4" body diameter 18-1/4" overall length   Learn More
$124.99 ea.
Camaro SLP, Loud Mouth II Dual Tips, 1998-2002 Part # 724465
SLP's F-Body cat-backs have always been the best performing exhaust systems in the business. Now they're the most versatile, too! Using our industry-exclusive modular design architecture, we've developed a line of systems that can be quickly reconfigured to fit changing performance, noise level, and sound quality requirements. Simply loosen a few band clamps, swap muffler types, retighten, and you're done. No other exhaust offers this level of performance and adaptability! Along with the included race muffler, the F-Body Loud Mouth II® system is compatible with our original Loud Mouth® resonator (#31066). Get both for complete control over your car's sound and performance characteristics. NOTE: Includes a Loud Mouth II® race muffler. Loud Mouth®resonator sold separately. FEATURES: Includes a Loud Mouth II® bullet-type race muffler for minimal restriction, reduced resonance, and an aggressive tone Employs SLP's exclusive modular technology, making it possible to switch between muffler and resonator types in a matter of minutes Lighter than the OEM exhaust assembly Constructed entirely from mandrel-bent stainless steel Features a show quality polished resonator and 2.5" "Dual/Dual" tips Includes pre-welded hangers, detailed instructions, and all necessary installation hardware Covered by SLP's Performance Guarantee and Limited Lifetime Warranty Learn More
$519.99 ea.
Camaro Exhaust System, LS1-LS6, Performance, MagnaFlow, 1998-2002 Part # 724511
Tested Increases Of Up To 20 Horsepower Rear Exit, 3" Stainless Steel Tubing 3.5" Slash Polished Stainless Steel Tips Learn More
$589.99 Set
Camaro Exhaust System, 3.8 V6, Performance, MagnaFlow, 1998-2002 Part # 724510
Tested Increases Of Up To 20 Horsepower Rear Exit, 3" Stainless Steel Tubing 3.5" Slash Polished Stainless Steel Tips Learn More
$559.99 Set
Camaro SLP Loud Mouth II,3.5", Slash Cut Tips, 1998-2002 Part # 724466
Zero Flow Restriction & The Meanest Sound Around Can Be Quickly Reconfigured To Fit Sound-Quality Requirements Built To OEM Standards To Ensure Proper Fit Constructed Entirely From Mandrel-Bent Stainless Steel Included All Installation Hardware Learn More
$519.99 ea.
Camaro SLP Loud Mouth II 3.5 Exhaust System, Slash Tips, 1998-2002 Part # 724464
Zero Flow Restriction & The Meanest Sound Around Can Be Quickly Reconfigured To Fit Sound-Quality Requirements Built To OEM Standards To Ensure Proper Fit Constructed Entirely From Mandrel-Bent Stainless Steel Included All Installation Hardware Learn More
$429.99 ea.
Camaro LS-1 F-Body BBK 1-3/4" Full-Length Exhaust Headers W/2.5" Y-Pipes, 1998-2002 Part # 33-11242
High-Performance Shorty Headers With 2.5" Y-Pipes 1-3/4" Mandrel-Bent Tubing Steel Construction With Chrome Finish 16-Guage Tubing 3/8" Flange Thickness 3-Bolt Flange Collector Attachment, Standard Style Flange Includes: Gaskets, Hardware, & Installation Instructions Added HP And Performance CAD Designed   Camaro LS-1 F-Body shorty chrome exhaust headers with y-pipes are an easy way to increase the horsepower in your 1998, 1999, 2000, 2001, or 2002 Camaro. Whereas stock manifolds combine exhaust gases from each exhaust port on the cylinder head as soon as the gases leave the engine, headers provide a single exhaust tube for each port, resulting in an easier workload when your engine evacuates the gases. These shorty headers are designed for direct bolt-on performance to the existing stock exhaust system. Each BBK full length long tube exhaust header system are CAD designed and are manufactured with 1-3/4" CNC mandrel bent tubing for unrestrictive airflow and a one piece laser cut flange 3/8" for added strength and durability. When you are in the market for performance at a value, invest in shorty chrome exhaust headers for your 1998, 1999, 2000, 2001, or 2002 Camaro. Available at Rick's Camaro today! Learn More
$449.99 ea.
Camaro LS1 BBK 1-3/4" Shorty Tuned Length Ceramic Exhaust Headers, 2001-2002 Part # 33-11232
High-Performance Shorty Tuned Length Headers 1-3/4" Mandrel-Bent Tubing Steel Construction With Silver Ceramic Polished Finish 16-Guage Tubing 3/8" Flange Thickness CAD Designed 3" Collector Diameter Includes: Gaskets, Hardware, & Installation Instructions   Camaro LS1 BBK shorty tuned exhaust headers are an easy way to increase the horsepower in your 2001 or 2002 Camaro. Whereas stock manifolds combine exhaust gases from each exhaust port on the cylinder head as soon as the gases leave the engine, headers provide a single exhaust tube for each port, resulting in an easier workload when your engine evacuates the gases. These exhaust headers are designed for direct bolt-on performance to the existing stock exhaust system. Each BBK exhaust header system are CAD designed and are manufactured with 1- 3/4" CNC mandrel bent tubing for unrestrictive airflow and a one piece laser cut flange 3/8" for added strength and durability. When you are in the market for performance at a value, invest in shorty tuned exhaust headers for your 2001 and 2002 Camaro LS1. Available at Rick's Camaro today! Learn More
$429.99 ea.
Camaro Header Kit, LS1, Long Tube, Ceramic Coated, SLP, 2001-2002 Part # 724271
Fits LS Family Engines Provides Up To 11hp & 10 Ft./Lbs. Torque 409 Stainless Steel Construction With Jet Hot Coating Bolt-On Installation, Includes All Installation Hardware Includes Stainless Steel 3" Diameter Slip-Fit Y-Pipe & High Flow Merge Collectors 1-3/4" Primary Tubes & 3" Collectors 2" More Ground Clearance Than Any Other Long Tube Will Not Fit Convertibles With Automatic Transmission Do you want to reduce your E.T.'s by up to 2 tenths of a second? Bolt on a set of these SLP free-flowing headers and you'll be on your way to faster E.T.'s. They will clear all sub-frame connectors and can be used with all factory accessories. With SLP's drop-in design, there is no need to move the motor or transmission as in other long tube installations. The new revised design follows the contours of the floorpan closer than any other long tube headers available. With 409 stainless steel construction and Jet Hot coating inside and out, engine heat is sent downstream, no need to worry about hot floors. This kit includes 200 cell/inch high flow 3" stainless steel catalytic converters, O2 sensor extension wiring harnesses, 4 stainless band clamps, manifold gaskets and A.I.R. tube gaskets. Learn More
$1,899.99 Kit
Camaro LS1 F-Body BBK 1-3/4" Full-Length Ceramic Exhaust Headers And 2.5" Y-Pipes, 1998-2002 Part # 33-11234
High-Performance Full-Length Headers With 2.5" Y-Pipes 1-3/4" Mandrel-Bent Tubing Steel Construction With Silver Ceramic Polished Finish 16-Guage Tubing 3/8" Flange Thickness CAD Designed 3-Bolt Flange Collector Includes: Gaskets, Hardware, Y-Pipes, & Installation Instructions   Camaro LS1 BBK full-length exhaust headers with Y-Pipes are an easy way to increase the horsepower in your 1998, 1999, 2000, 2001, or 2002 Camaro. Whereas stock manifolds combine exhaust gases from each exhaust port on the cylinder head as soon as the gases leave the engine, headers provide a single exhaust tube for each port, resulting in an easier workload when your engine evacuates the gases. These exhaust headers are designed for direct bolt-on performance to the existing stock exhaust system. Each BBK exhaust header system are CAD designed and are manufactured with 1- 3/4" CNC mandrel bent tubing for unrestrictive airflow and a one piece laser cut flange 3/8" for added strength and durability. When you are in the market for performance at a value, invest in full-length exhaust headers for your 1998, 1999, 2000, 2001, or 2002 Camaro LS1. Available at Rick's Camaro today! Learn More
$529.99 ea.
Camaro LS1 BBK 1-3/4" Shorty Chrome Tuned Length Exhaust Headers, 2001-2002 Part # 33-11240
High-Performance Shorty Headers 1-3/4" Mandrel-Bent Tubing Steel Construction With Chrome Finish 16-Guage Tubing 3/8" Flange Thickness CAD Designed Includes: Gaskets, Hardware, & Installation Instructions Added HP And Performance   Camaro LS1 shorty chrome exhaust headers are an easy way to increase the horsepower in your 2001 or 2002 Camaro. Whereas stock manifolds combine exhaust gases from each exhaust port on the cylinder head as soon as the gases leave the engine, headers provide a single exhaust tube for each port, resulting in an easier workload when your engine evacuates the gases. These shorty headers are designed for direct bolt-on performance to the existing stock exhaust system. Each BBK full length long tube exhaust header system are CAD designed and are manufactured with 1-3/4" CNC mandrel bent tubing for unrestrictive airflow and a one piece laser cut flange 3/8" for added strength and durability. When you are in the market for performance at a value, invest in shorty chrome exhaust headers for your 2001 or 2002 Camaro. Available at Rick's Camaro today! Learn More
$349.99 ea.
Doug's Headers, Ceramic Coated LS1, 2000-2002 Part # 724496
Fits LS Family Engines Outstanding Torque & HP Over A Wide RPM Range Easy Bolt-On Installation Header Tube Size Is 1-7/8"/Collector Size 3" SAP Port Shape Not Legal For Sale Or Use In California When it's time to select headers for the street your most important criteria should be the most torque and horsepower over widest possible RPM band. And Doug's Headers deliver both in a big way. These 2000, 2001, 2002 header are tuned with the proper tube size and length to efficiently remove all of the exhaust from each cylinder and reducing pumping losses. In addition you will find the fit and finish are superb and you'll have years of leak-free operation because of Doug's extra thick flanges. Trust Rick's Camaros for all your 2000, 2001, 2002 Camaro needs! Learn More
$717.99 Set
Camaro BBK 2-1/2" Vari-Tune Adjustable Stainless Steel Performance Muffler, Offset Part # 33-11209
High-Performance Universal Muffler Rectangular Case, 2 1/2" Inlet Diameter, Offset Chambered Internal Construction Stainless Steel Construction With Natural Finish Closed End Cap, Standard Outlet Without Tip   Camaro universal Vari-tune mufflers are a great performance addition for any Camaro. American designed and built, these performance mufflers are one of a kind, offering a muffler that can be adjusted for sound and horsepower by just moving the adjustment screw under the car. The unique design of this superb muffler allows side-to-side tuning to cut out the drowning or resonance that often happens when at a low rpm. Available aluminized or in stainless steel and in 2.5", 2.75", and 3.0", these mufflers are offered in various offsets to insure proper fit on most aftermarket and OEM applications. When you are in the market for a new high-performance muffler, invest in a BBK universal Varitune muffler. Available at Rick's Camaro today! Learn More
$139.99 ea.
Camaro BBK 3" Vari-Tune Adjustable Stainless Steel Performance Muffler, Offset Part # 33-11199
High-Performance Universal Muffler Rectangular Case, 3" Inlet Diameter, Offset Chambered Internal Construction Stainless Steel Construction With Natural Finish Closed End Cap, Standard Outlet Without Tip   Camaro universal Vari-tune mufflers are a great performance addition for any Camaro. American designed and built, these performance mufflers are one of a kind, offering a muffler that can be adjusted for sound and horsepower by just moving the adjustment screw under the car. The unique design of this superb muffler allows side-to-side tuning to cut out the drowning or resonance that often happens when at a low rpm. Available aluminized or in stainless steel and in 2.5", 2.75", and 3.0", these mufflers are offered in various offsets to insure proper fit on most aftermarket and OEM applications. When you are in the market for a new high-performance muffler, invest in a BBK universal Varitune muffler. Available at Rick"s Camaro today! Learn More
$139.99 ea.
Camaro BBK 3" Vari-Tune Adjustable Aluminized Steel Performance Muffler, Offset Part # 33-11210
High-Performance Universal Muffler Rectangular Case, 3" Inlet Diameter, Offset Chambered Internal Construction Steel Construction With Aluminized Finish Closed End Cap, Standard Outlet Without Tip   Camaro universal Vari-tune mufflers are a great performance addition for any Camaro. American designed and built, these performance mufflers are one of a kind, offering a muffler that can be adjusted for sound and horsepower by just moving the adjustment screw under the car. The unique design of this superb muffler allows side-to-side tuning to cut out the drowning or resonance that often happens when at a low rpm. Available aluminized or in stainless steel and in 2.5", 2.75", and 3.0", these mufflers are offered in various offsets to insure proper fit on most aftermarket and OEM applications. When you are in the market for a new high-performance muffler, invest in a BBK universal Varitune muffler. Available at Rick's Camaro today! Learn More
$114.99 ea.
Camaro BBK 2-3/4" Vari-Tune Adjustable Aluminized Steel Performance Muffler, Offset Part # 33-11211
High-Performance Universal Muffler Rectangular Case, 2 3/4" Inlet Diameter, Offset Chambered Internal Construction Steel Construction With Aluminized Finish Closed End Cap, Standard Outlet Without Tip   Camaro universal Vari-tune mufflers are a great performance addition for any Camaro. American designed and built, these performance mufflers are one of a kind, offering a muffler that can be adjusted for sound and horsepower by just moving the adjustment screw under the car. The unique design of this superb muffler allows side-to-side tuning to cut out the drowning or resonance that often happens when at a low rpm. Available aluminized or in stainless steel and in 2.5", 2.75", and 3.0", these mufflers are offered in various offsets to insure proper fit on most aftermarket and OEM applications. When you are in the market for a new high-performance muffler, invest in a BBK universal Varitune muffler. Available at Rick's Camaro today! Learn More
$109.99 ea.
$99.99 ea.
Camaro BBK 2-3/4" Vari-Tune Adjustable Stainless Steel Performance Muffler, Offset Part # 33-11208
High-Performance Universal Muffler Rectangular Case, 2 3/4" Inlet Diameter, Offset Chambered Internal Construction Stainless Steel Construction With Natural Finish Closed End Cap, Standard Outlet Without Tip   Camaro universal Vari-tune mufflers are a great performance addition for any Camaro. American designed and built, these performance mufflers are one of a kind, offering a muffler that can be adjusted for sound and horsepower by just moving the adjustment screw under the car. The unique design of this superb muffler allows side-to-side tuning to cut out the drowning or resonance that often happens when at a low rpm. Available aluminized or in stainless steel and in 2.5", 2.75", and 3.0", these mufflers are offered in various offsets to insure proper fit on most aftermarket and OEM applications. When you are in the market for a new high-performance muffler, invest in a BBK universal Varitune muffler. Available at Rick's Camaro today! Learn More
$139.99 ea.
Camaro Magnaflow Performance Satin Stainless Steel Muffler,1984-2002 Part # 33-00013
Reversible For Custom Installation Straight-Through Wide Open Design Great Sound -Has A Smooth Deep Tone 100% Stainless Steel Construction Universal Replacement Muffler Lifetime Warranty MagnaFlow Satin Stainless Steel Muffler features top-quality stainless steel construction throughout for maximum durability. The steel is put together with smooth welds, resulting in a muffler that is built to last as much as it's built to impress. MagnaFlow Satin Stainless Steel Muffler is built to look great and last long. It is covered by a lifetime warranty. Features a straight-through perforated stainless steel core, stainless mesh wrap and acoustical fiber fill! Learn More
$129.99 ea.
Camaro BBK 2-1/2" Vari-Tune Adjustable Aluminized Steel Performance Muffler, Offset Part # 33-11212
High-Performance Universal Muffler Rectangular Case, 2 1/2" Inlet Diameter, Offset Chambered Internal Construction Steel Construction With Aluminized Finish Closed End Cap, Standard Outlet Without Tip   Camaro universal Vari-tune mufflers are a great performance addition for any Camaro. American designed and built, these performance mufflers are one of a kind, offering a muffler that can be adjusted for sound and horsepower by just moving the adjustment screw under the car. The unique design of this superb muffler allows side-to-side tuning to cut out the drowning or resonance that often happens when at a low rpm. Available aluminized or in stainless steel and in 2.5", 2.75", and 3.0", these mufflers are offered in various offsets to insure proper fit on most aftermarket and OEM applications. When you are in the market for a new high-performance muffler, invest in a BBK universal Varitune muffler. Available at Rick's Camaro today! Learn More
$109.99 ea.
Items: 1 to 28 of 43 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. Next
Grid  |  List
3