Product Experts Available 1-800-359-7717

2010 CAMARO 1SS CHEVY PERFORMANCE

Search Term: 'All Parts'
Category: 'Performance'
Vehicle: '2010 CHEVY CAMARO 1SS'

Items: 1 to 28 of 38 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. Next
Grid  |  List
Best Sellers
Camaro Power Converter, Throttle Response With Automatic Transmission, 2010-2013 Part # 790109
Improve Off Line Throttle Response Three Settings Controlled By Switch Easy Installation Sprint Booster is engineered to enhance the driving experience by providing increased acceleration time (eliminating delay) on drive-by-wire cars by continuously measuring and converting the digital signal and providing the ECM (Electronic Control Module) with a new and altered signal for much quicker response. Sprint Booster improves response, increases pedal input sensitivity and delivers more impressive off the line performance you can really feel. Learn More

Was: $389.99 Kit

Now: $349.99 Kit
Camaro Vararam Ram Air Intake System, V8, 2010-2013 Part # 33-10324
20-32 HP Gain! Recommended For Cars Up to 430 HP Easy Bolt On Installation No Tune Required Vararam HAS GIVEN CAMARO OWNERS WHAT THEY HAVE BEEN asking for! The new 2010-2012 Camaro system from VR represents a major leap forward in terms of real world performance delivered with the quality that Camaro owners and tuners alike have come to expect. ?Quite simply, this is the Most Powerful ram air system we have ever produced for a Road Car.? This is the most powerful induction system of any kind for the new 2010-2012 Camaro. Our competition will talk, but they will not outflow it or outrun it. They will never outperform it! Every aspect of induction technology has been used in this system. You can even take the filter out of the latest VR system and drive the car around without issue ....it will be baby smooth, try that with any other air box on the planet! This enables tuners to maximize the HP in there combinations without compromising drivability at any point. From mild to wild the VR-SS will stay smooth while delivering tire smoking airflow that no other company can match! Learn More
$399.99 ea.
K&N Air Filter Sealing Grease, 1967-2012 Part # 88-0355-3
Improves Seal Between Air Filter & Metal Housing Supplied In 6 Oz. Tube As the first choice of car enthusiasts, K&N air filters offer virtually unrestricted airflow while stopping dirt, dust and other harmful particles. They are washable, reusable and more efficient than paper filters. This K&N sealing grease ensures an airtight seal within the air cleaner housing. Learn More

Was: $11.99 ea.

Now: $9.99 ea.
Camaro Programmer Plus, Jet Performance,LS3 & LS9, 2010 -2013 Part # 790482
Fits LS3 Engine The JET Performance Programmer Plus lets you take control and program your own vehicle computer to match your driving style. JET's exclusive Tri-Power tuning allows you to program for performance using lower cost regular octane fuel, or for optimal performance gains you can program for midgrade or premium fuels. All three tuning modes are designed to operate the engine at peak efficiency based on the octane level being used to improve horsepower and mileage. The advanced technology and design of the JET Performance Programmer Plus gives you the ability to modify air and fuel ratios, ignition timing, shift points, shift firmness, speed limiter and rev limiter settings. The programmer will also correct your speedometer and turn off the ABS system trouble light if you change tire size or gear ratios. Also includes a built in scan tool to read and clear diagnostic trouble codes when your check engine light comes on saving you a costly trip to the dealer. The programmer simply plugs into the vehicle's diagnostic port under the dash and then the easy to use installation software allows you to make your changes by answering simple yes or no questions. Take the next step in performance tuning with the JET Performance Programmer Plus! Instructions included. Learn More

Was: $399.99 ea.

Now: $339.99 ea.
Camaro Mass Air Sensor, Jet Performance, 3.6L, 2010 Part # 33-10957
Improves Horsepower, Torque And Mileage Works With Upgrades Like Cold Air Intakes And Free Flow Exhausts Increases Of 45% In Air Flow Used With 3.6L Engine Made In USA The JET Powr-Flo Mass Air Sensor for your 2010 Camaro delivers improved horsepower, torque and mileage from your car by simply replacing the restrictive stock mass air sensor. The factory sensor not only is a major restrictive point in stock intake systems, but it also limits the full potential of aftermarket cold air intake systems. The flow bench tested design of the JET Mass Air Sensor provides airflow increases of up to 45% and installs in 10 minutes or less. Compatible with other aftermarket upgrades such as computer upgrades, cold air intakes, TBI spacers, free flow exhaust systems, etc. Trust Ricks Camaros for all your needs. Learn More

Was: $179.99 ea.

Now: $159.99 ea.
Camaro Cold Air Induction Kit, Airaid, 6.2L V-8, 2010-2013 Part # 790103
Add Up To 16 HP & 13 TQ High Flow, Washable & Reusable Air Filter Cold Air Dam Design Keeps Out Engine Heat Massive 4" Intake Tube Easy Bolt On Installation $50 Airaid Rebate Form   A Camaro Airaid Synthaflow MXP intake system is a great performance upgrade for your 2010, 2011, 2012, or 2013 Camaro. This intake system offers the ultimate in Cold Air induction systems. The intake starts with a one-piece roto-molded air box, alleviating all the faults of your factory intake. Designed for high-performance gas and diesel applications, the intake started with a one-piece roto-molded air box and now has tubes constructed of cross-linked, high-density Polyethylene to maintain proper mass airflow readings and calibration. Furthering promoting airflow, many models include a built-in velocity stack. This product effectively increases airflow while maintaining proper air/fuel ratios, so you won’t have to worry about recalibration. If you’re in the market for improved horsepower, torque, and mpg, invest in an Airaid Synthaflow MXP intake system for your 2010, 2011, 2012, or 2013 Camaro. Available at Rick’s Camaro today!   Learn More
$369.99 Kit
Camaro Mass Air Sensor, Jet Performance, 6.2 Or 7.0, 2010-2013 Part # 33-10278
Improves Horsepower, Torque And Mileage Works With Upgrades Like Cold Air Intakes And Free Flow Exhausts Increases Of 45% In Air Flow Used With 6.2 Or 7.0 Engines The JET Powr-Flo Mass Air Sensor delivers improved horsepower, torque and mileage from your car by simply replacing the restrictive stock mass air sensor. The factory sensor not only is a major restrictive point in stock intake systems, but it also limits the full potential of aftermarket cold air intake systems. The flow bench tested design of the JET Mass Air Sensor provides airflow increases of up to 45% and installs in 10 minutes or less. Compatible with other aftermarket upgrades such as computer upgrades, cold air intakes, TBI spacers, free flow exhaust systems, etc. Learn More

Was: $189.99 ea.

Now: $159.99 ea.
Camaro Diablo Sport Predator InTune Programmer, 1999-2013 Part # 33-10138
Hi-Performance Flash Tuning Quicker Acceleration! Better Fuel Mileage Fits SS/ZL1 & LS1, LS3, L99, & LSA Engines The DiabloSport inTune programmer is the all new successor for the Predator handheld tuner that you have come to know and love. The long tour of the Predator tuner was an excellent one, but it has finally reached its home stretch making way for the DiabloSport inTune. The DiabloSport inTune has all of the famous preloaded tunes and available adjustments as the Predator, in a smaller, more advanced, and easier-to-use device! DiabloSport inTune delivers an enhanced user experience with easy-to-understand menus controlled through a color touch screen, automatic USB updates via the internet (with no cable kits to buy!), and broad range of vehicle support coupled with a host of vehicle specific features, all at an incredibly affordable price. Its like no other flash tuning device available, offering all of the functions users want, and fits in your pocket! inTune Features: Lightweight components, compact construction and removable cables for mobility Free automatic online updates for life with supplied USB cable One part number suppports all applcations Full color touch screen Includes multiple preloaded tunes for all vehicle applications Tune multiple supported vehicles (1 at a time) Supports custom tuning and holds unlimited custom tunes The most adjustable parameters on the market Easy to use-simple 4 step tuning Analog input-hook up wideband sensors, egt sensors and more Features DiabloSport's "vehicle detection engine"-automatically detects your vehicle and provides you with all available tunes Hassle free menu navigation and simple layouts for worry free tuning Included datalogging functionality and free downloadable software (Dataviewer) Universal diagnostic tool MAC compatible with drag and drop file transfer/updates Warranty safe-no fingerprints, watermarks or counters Designed, engineered and manufactured in the USA 1 Year warranty and and 30 day money back guarantee Learn More
$399.99 ea.
Camaro Autoloc Flame Thrower Kit, Dual Exhaust, 1967-2014 Part # 33-12300
Ultimate Hot Rod Accessory Flames Shoot Up To 20 Feet On Command! Kit Includes Control Box, Activation Button, Wiring And Diagram Requires 2 Each Spark Plugs And Coils, Not Included For Recreational Use Only, Please Check Local Ordinances Flame thrower kits give your 1967-2014 Camaro bad boy appeal. After all, that?s what hot rodding is all about. Rick's Camaro offers Autoloc flame thrower kits for exhibition use. These kits allow you to shoot flames up to 20? from your lowrider, gasser, or even show classic's exhaust on command. Talk about an attention grabber! This kit comes with detailed instructions and wiring diagram to make your project easier. Whether your 1967-2014 Camaro is stock or an all out hot rod, you can count on Rick's Camaro for all your needs. PLEASE NOTE: This item is meant for recreational and exhibition use only. Check local ordinances concernings use. Neither Eckler's nor Autoloc assumes liabity for any loss, injury or property damage incurred by use of this product. FOR SHOW USE ONLY, NOT FOR STREET USE. NOTE: This item is meant for recreational and exhibition use only. Check local ordinances concerning use. Neither Eckler's nor Autoloc assumes liability for any loss, injury or property damage incurred by use of this product. FOR SHOW USE ONLY, NOT FOR STREET USE. Learn More
$189.99 Kit
Cleaner,K&N Air Filter 32oz Part # 88-0357-3
32 oz. Squirt Bottle Cleans and degreases K&N (cotton fabric type) air filter elements. Dissolves oily dirt build-up and washes away with water. Learn More

Was: $11.99 ea.

Now: $9.99 ea.
Camaro Module, Jet Performance, Stage 1, Power Control, 5.7 Or 6.0, 2010-2013 Part # 33-10280
Improves Air/Fuel Ratio 50 States Legal Add up to 25 horsepower instantly with simple, plug-in installation! Only JET Performance Modules provide exclusive, full range Dynamic Spectrum Tuning of the air/fuel ratio, ignition advance, transmission and various other parameters. Each program is track and dyno tested to ensure the most possible horsepower and drivability from each application. 50 state smog legal! Learn More

Was: $299.99 ea.

Now: $239.99 ea.
Camaro BBK Throttle Body, Cable Drive, 100mm, LS2/LS3/LS7 Part # 33-30028
Designed for the popular LS2/LS3/LS7 engine swaps, BBK's 100mm performance throttle body offers maximum performance when you step on the accelerator. Built in the USA with a new computer machined casting and top notch components, each throttle body is designed as a simple direct bolt on that can be done in just minutes.   Learn More
$349.99 ea.
Camaro SS Stainless Longtube Headers LS3 Kooks, 1 7/8"x3", 2010-2014 Part # 33-11959
Stainless Steel Construction WIth Natural Finish 1 7/8" x 3" Longtube Headers 3" x 2 1/2" High Flow Cats 18-Guage Tubing 3 in. Collector Diamater With Ball-And -Socket Flange For OEM Connection For Camaro SS LS3 6.2L Flange Thickness: 3/8" Includes Bolts, Studs, & Gaskets Camaro Kooks longtube headers are a perfect performance upgrade for your 2010, 2011, 2012, 2013, or 2014 Camaro SS 6.2L LS3. Constructed of T-304 Stainless Steel, this header offers performance, durability, and style. When in the market to boost your 2010, 2011, 2012, 2013, or 2014 Camaro's power, invest in Kooks longtube headers. Available at Rick's Camaro today! Learn More
$1,450.99 ea.
Comp Cams EZ EFI 2.0, Master Kit With In-Tank Fuel Pump Part # 88-3746-3
Converts Your Carburetor To Speed Density Fuel Injection In One Day Retains Your Air Cleaner, Distributor, Linkage, & Requires No Hood Modifications Cannot Be Used On Factory Computer Controlled Vehicles Eliminates Drivability, Cold Start, Sputtering, Coughing, & Stalling Issues Vastly Improves Drivability, Efficiency, & Performance Self Tunes With No Laptop Or Internet Connection Required 8-injector Throttle Body Supports Stock To 1200 HP Engines Holley Carb-Style Throttle Linkage & 4150 Square Bolt Pattern Walbro 450 LPH Pump Is Automatically Cooled By Fuel In The Tank Advanced Color Touch Screen Hand-Held/Sensor Dash W/Suction-Cup Mount - Same Mounting Points As Garmin GPS Exclusive Fuel Pulse Damper Creates Precise Fuel Control - Return Or Returnless-Style Fuel Systems Supported Works With Standard Distributors Or FAST™ Distributors For Plug And Play Electronic Timing Control High-Quality Wiring Harness With Mesh Loom & Wide-Band O2 Has The Fewest Connections On The Market ECU Includes On-Board LED Diagnostics & EZ-Test™ Indicator Lights Compatible With Standard, Ethanol Blend, & E85 Fuels Complete System Includes Everything You Need Made In The USA Lifetime Limited Manufacturer's Warranty Your classic vehicle is likely to be equipped with a carburetor. With millions on the road, carburetors "can" work great. If you drive your carbureted vehicle, you're familiar with the issues that come with it. Drivability is not great in cold weather or when driving in high elevations. They can cough, sputter, and even stall which, can be dangerous. And, they are prone to carboning up which leads to even more problems. Often, a re-tune can solve your problem for a little while but good luck finding someone who "knows" how to tune your carburetor right!  And, the tune can even change over time requiring another re-tune.  Step up to Comp Cams Fast EZ EFI® 2.0 and solve your carebureator woes once and for all.  The next generation of the revolutionary self tuning maintains ease-of-use that doesn't require a laptop or tuning experience. Simply hook up the system, answer the Setup Wizard questions on the hand-held, and EZ-EFI 2.0® tunes itself as you drive. Its eight-injector, die cast throttle body features OEM late model sensors for accuracy, durability, and availability at virtually any auto parts store won't leave you stranded.  The system supports up to 1200 horsepower (the highest on the market) so it grows with future modifications. It works with virtually any distributor and optional timing control is available.  A new secondary shaft throttle stop adjustment provides even more precise idle airflow adjustment and balance. An industry exclusive integrated fuel pulse damper creates ultra-precise fuel control. The EZ-EFI 2.0® also incorporates needle-bearing supported shafts instead of bushings and an integrated fuel rail design with crossover for tighter packaging. Setup includes the market's fewest connection wires, including a new high-quality wiring harness and a sleek mesh-type loom. The EZ-EFI 2.0® fetures the industry’s first color touchscreen on a hand held tuner. Self-powered through the ECU rather than requiring an outside power source, it shares the same mounting points as the Garmin Nuvi GPS, meaning there are nearly limitless mounting options (suction cup mount is included). Serving as the Setup Wizard initially, it then becomes an electronic gauge screen. The hand-held has various advanced features including screen hide sleep function, expanded diagnostics and data screens, plus intuitive navigation. Electronic fuel pressure measurement is standard on all kits, and all kits work with a wet nitrous system, providing built-in nitrous timing retard and special nitrous AFR targeting. EZ-Ignition™ features an EZ-Solution™ option, meaning that it is plug-and-play with FAST™ Distributors for electronic timing control or can be used with an EFI distributor of your choice and a FAST™ Crank Trigger. Or the system can be used to control fuel only and be used with a standard carb-type distributor (Ex. HEI) where timing is set manually. NOTES:  NOT compatible with resistor spark plugs or solid core spark plug wires.  Requires adapter or a new intake manifold if your existing manifold is not equipped with a square carburetor mounting flange.  The EZ-EFI® throttle body provides two 3/8 and one 1/8 manifold vacuum ports and one 1/8 ported vacuum port. (Ported vacuum ports do not provide a vacuum signal at idle.) If the carburetor being removed from your vehicle utilized more than this number of ports, you may require a barbed T fitting of the appropriate size to multiply the number of ports available on the EZ throttle body.  You will need a 2" hole saw (not included) if you elect to mount the wiring harness through the firewall and mount the ECM in your interior.  A 2" firewall grommet is included for this purpose.  The main battery wires, labeled “BATTERY POS” and “BATTERY NEG” MUST BE CONNECTED DIRECTLY to the battery. Connecting them anywhere else invites problems with electrical noise. These kinds of problems are difficult to diagnose. The wires may be extended if needed using automotive grade 10 gauge (or larger) wire.  CAUTION:  Installation of this product requires detailed knowledge of automotive systems and repair procedures. Installation of fuel system parts and any fuel tank modifications must be carried out by a qualified automotive technician. Installation of fuel system parts requires handling of gasoline. Ensure that work is performed in a well-ventilated area with an approved fire extinguisher nearby. Extinguish all open flames, prohibit smoking and eliminate all sources of ignition in the area of the vehicle before proceeding with the installation. When working with fuel systems, eye goggles and other safety apparel should be worn as needed to protect against debris and sprayed gasoline. The finished work must be checked carefully to ensure there are no fuel leaks. All fuel lines and connectors used in the installation of your fuel injection system should be rated for the higher pressure associated with fuel injection systems. It is not recommended that you use the factory hard lines as part of your installation unless the ends allow for the proper connection to high pressure systems. Be mindful as you route your fuel hoses that you keep them away from sources of heat and moving components on your vehicle. Learn More
$2,863.97 ea.

New!

Camaro B&B Exhaust Super Sport And ZL1 Long Tube Headers, 1-7/8", 2010-2013 Camaro SS, 2012-2013 Camaro ZL1 Part # 33-11617
B&B High-Performance Long Tube Exhaust Headers 16-Gauge T304 Stainless Steel Construction 1-7/8" Mandrel Bent Tubing Purge Resonance Technology (PRT) Easy Installation, No Welding, Mounting Hardware Included Fits 10-13 SS Camaro, 12-13 ZL1 Camaro Couple With B&B Cat Pipes P/N 33-11618 For Extreme Performance Limited Lifetime Warranty Camaro SS/ZL1 B&B Exhaust Long Tube Headers make an awesome performance upgrade for your 2010, 2011, 2012, or 2013 Camaro, offering the increased sound and command that you are looking for. The 16-gauge, 1-7/8", CNC mandrel bent, t304 Stainless Steel construction is used throughout the entire system. Also, the long tube headers feature B&B's Purge Resonance Technology (PRT), allowing for a mild exhaust note at cruising speeds and a forceful note under aggressive driving. When you are looking for more get-up-and-go in your 2010, 2011, 2012, or 2013 V8 Camaro, invest in Billy Boat Exhaust Long Tube SS Headers. Available at Rick's Camaro today! Learn More
$1,395.99 ea.
Camaro Connection Pipes, With Catalytic Converters, Super Sport, 3'', 6.2L V8, Kooks, 2010-2012 Part # 33-13560
3" Stainless Steel Catted Connection Pipes Includes Kooks High Flow Race Cats Must Be Used With Kooks Long Tube Headers Will Connect To Kooks Catback Or OEM Exhaust 2010-2012 Camaro is becoming a standard on the car show and the street machine scenes. Ricks Camaros offers this quality, Connection Pipes, With Catalytic Converters, Super Sport, 3", 6.2L V8, Kooks, for your high performance Camaro. These connection pipes are made from durable stainless steel and includes 3" connection pipe and high flow race catalytic converters. For use with Kooks long tube headers. Do not settle for just any performance parts for your 2010, 2011, 2012 Camaro Super Sport, use only the best parts for your performance project. Trust Ricks Camaros for all your part needs. NOTE: Must Be Used With Kooks Long Tube Headers Learn More
$514.99 ea.

New!

Camaro Power Converter, Throttle Response With Manual Transmission, 2010-2013 Part # 790108
Improve Off Line Throttle Response Three Settings Controlled By Switch Easy Installation Sprint Booster is engineered to enhance the driving experience by providing increased acceleration time (eliminating delay) on drive-by-wire cars by continuously measuring and converting the digital signal and providing the ECM (Electronic Control Module) with a new and altered signal for much quicker response. Sprint Booster improves response, increases pedal input sensitivity and delivers more impressive off the line performance you can really feel. Learn More

Was: $389.99 Kit

Now: $349.99 Kit
Edelbrock 2010-2014 Camaro E-Force Street Supercharger Kit, With Manual Transmission Part # 719647
Supercharger Manifold Assembly (Featuring Eaton TVS Rotors) Cast Aluminum Alternator/Idler Bracket Heavy Duty Automatic Belt Tensioner Dual, High Capacity, Bar & Plate Intercoolers Full Face Low Temp. Heat Exchanger for Intercooler System Extruded Aluminum Fuel Rails with -6 AN Lines Electric Intercooler Water Pump Intercooler Recovery Tank Steel Idler Pulleys With Heavy Duty High Speed Bearings For Manual Transmission The Edelbrock E-Force Supercharger can take your already high performance street car to the next level. This supercharger kit is exclusively tailored for the 2010, 2011, 2012, 2013 or 2014 Camaro SS and will allow you to boost your performance to a whole new level. The unique features of this kit are the 12" long intake runners that allow for maximum low end torque and the optional 5 year 100,000 mile warranty. Its compact design fits under the stock hood and complements the clean look of the engine compartment. The street kits include the components from the competition kits, plus other items needed for daily driver use. Trust Rick's Camaros for all of your restoration and replacement needs for your 2010, 2011, 2012, 2013, or 2014 F-Body Camaro!  Learn More

Was: $8,889.99 Kit

Now: $7,199.99 Kit
Camaro Long Tube Headers, Super Sport And ZL1, 6.2L V8, Kooks, 2010-2012 Part # 33-13555
Great Performance Upgrade For Your Super Sport Or ZL1 Made From Durable Stainless Steel 2" x 3" Stainless Steel Long Tube Headers Increased Horsepower And Torque O2 Extensions And All Hardware Required For Install Is Included Must Be Used With Kooks Connection Pipes Or Complete Exhaust 2010-2012 Camaro is becoming a standard on the car show and the street machine scenes. Ricks Camaros offers these quality, Long Tube Headers, Super Sport And ZL1, 6.2L V8, Kooks, for your high performance LS1 equipped Camaro. These headers are made from durable stainless steel, with O2 extensions, gaskets and all required hardware for installation. These headers measure in at 2" X 3", giving you the maximum size to dump spent exhaust gases. Do not settle for just any performance parts for your 2010, 2011, 2012 Camaro, use only the best parts for your performance project. Trust Ricks Camaros for all your part needs. NOTE: Must Be Used With Kooks Connection Pipes Or Complete Exhaust Learn More
$1,178.99 ea.

New!

Camaro Connection Pipes, Off Road, Super Sport, 3'', 6.2L V8, Kooks, 2010-2012 Part # 33-13561
3" Stainless Steel Off Road Connection Pipes Must Be Used With Kooks Long Tube Headers Will Connect To Kooks Catback Or OEM Exhaust Off Road Pipes, No Catalytic Converters 2010-2012 Camaro is becoming a standard on the car show and the street machine scenes. Ricks Camaros offers this quality, Connection Pipes, Off Road, Super Sport, 3", 6.2L V8, Kooks, for your high performance Camaro. These connection pipes are made from durable stainless steel and includes 3" connection pipe without converters. For use with Kooks long tube headers. Do not settle for just any performance parts for your 2010, 2011, 2012 Camaro Super Sport, use only the best parts for your performance project. Trust Ricks Camaros for all your part needs. NOTE: Must Be Used With Kooks Long Tube Headers Learn More
$266.99 ea.

New!

Edelbrock 2010-2014 E-Force Camaro Street Supercharger Kit, For Automatic Transmission Part # 719646
Supercharger Manifold Assembly (Featuring Eaton TVS Rotors) Cast Aluminum Alternator/Idler Bracket Heavy Duty Automatic Belt Tensioner Dual, High Capacity, Bar & Plate Intercoolers Full Face Low Temp. Heat Exchanger for Intercooler System Extruded Aluminum Fuel Rails with -6 AN Lines Electric Intercooler Water Pump Intercooler Recovery Tank Steel Idler Pulleys With Heavy Duty High Speed Bearings For Automatic Transmission The Edelbrock E-Force Supercharger can take your already high performance street car to the next level. This supercharger kit is exclusively tailored for the 2010, 2011, 2012, 2013, or 2014 Camaro SS and will allow you to boost your performance to a whole new level. The unique features of this kit are the 12" long intake runners that allow for maximum low end torque and the optional 5 year 100,000 mile warranty. Its compact design fits under the stock hood and complements the clean look of the engine compartment. The Street kits include the components from the competition kits, plus other items needed for daily driver use. Trust Rick's Camaros for all of your restoration and replacement needs for your 2010, 2011, 2012, 2013, or 2014 F-Body Camaro!  Learn More

Was: $8,889.99 Kit

Now: $7,199.99 Kit
Edelbrock 2010-2014 Camaro E-Force Competition Supercharger Kit, For Automatic Transmission Part # 719645
Supercharger Manifold Assembly (Featuring Eaton TVS Rotors) Cast Aluminum Alternator/Idler Bracket Heavy Duty Automatic Belt Tensioner Dual, High Capacity, Bar & Plate Intercoolers Full Face Low Temp. Heat Exchanger for Intercooler System Extruded Aluminum Fuel Rails with -6 AN Lines Electric Intercooler Water Pump Intercooler Recovery Tank Steel Idler Pulleys With Heavy Duty High Speed Bearings For Automatic Transmission The Edelbrock Competition Supercharger can take your already high performance street car to the next level. This supercharger kit is exclusively tailored for the 2010, 2011, 2012, 2013, or 2014 Camaro SS and will allow you to boost your performance to a whole new level. The unique features of this kit are the 12" long intake runners that allow for maximum low end torque and the optional 5 year 100,000 mile warranty. Its compact design fits under the stock hood and complements the clean look of the engine compartment. This E-Force Competition Supercharger kit is based off of our street supercharger kit P/N 719646, but is paired down to the essential components that a racer needs, without the extras that experienced racers prefer to customize for their own competitive advantage. For competition racing use only. Trust Rick's Camaros for all of your restoration and replacement needs for your 2010, 2011, 2012, 2013, or 2014 racing Camaro!  Learn More

Was: $8,889.99 Kit

Now: $5,999.99 Kit
Edelbrock 2010-2014 Camaro E-Force Competition Supercharger Kit, Manual Transmission Part # 719644
Supercharger Manifold Assembly (Featuring Eaton TVS Rotors) Cast Aluminum Alternator/Idler Bracket Heavy Duty Automatic Belt Tensioner Dual, High Capacity, Bar & Plate Intercoolers Full Face Low Temp. Heat Exchanger for Intercooler System Extruded Aluminum Fuel Rails with -6 AN Lines Electric Intercooler Water Pump Intercooler Recovery Tank Steel Idler Pulleys With Heavy Duty High Speed Bearings For Manual Transmission The Edelbrock Competition Supercharger can take your already high performance street car to the next level. This supercharger kit is exclusively tailored for the 2010, 2011, 2012, 2013, or 2014 Camaro SS and will allow you to boost your performance to a whole new level. The unique features of this kit are the 12" long intake runners that allow for maximum low end torque and the optional 5 year 100,000 mile warranty. Its compact design fits under the stock hood and complements the clean look of the engine compartment. This E-Force Competition Supercharger kit is based off of our street supercharger kit P/N 719647, but is paired down to the essential components that a racer needs, without the extras that experienced racers prefer to customize for their own competitive advantage. For competition racing use only. Trust Rick's Camaros for all of your restoration and replacement needs for your 2010, 2011, 2012, 2013, or 2014 racing Camaro!  Learn More

Was: $8,889.99 Kit

Now: $5,999.99 Kit
Camaro Underdrive Pulley, 6.2L, 2010-2013 Part # 33-10679
Reduces Engine Drag Increases Up To 12 Horsepower Requires New Belt (2 If Equipped With Air Condtioning) JET Performance Products has released a new underdrive pulley for 2010-2013 6.2L Camaro applications. The pulley will add 10-12 horsepower at the drive wheels. The underdrive pulley reduces the drag placed on the engine and allows it turn with less effort. Installation is simple and straight forward and does require 2 new belts. Learn More

Was: $359.99 ea.

Now: $339.99 ea.
Camaro Cold Air Induction Kit, Airaid, 3.6L V-6, 2010-2011 Part # 790102
Add Up To 11 HP & 14TQ High Flow, Washable & Reusable Air Filter Cold Air Dam Design Keeps Out Engine Heat Includes Modular 4" Intake Tube Black Plastic Tube, Filter End Cap, Sleeve Red Filter Easy Bolt On Installation $50 Airaid Rebate Form   A Camaro Airaid Synthaflow MXP intake system is a great performance upgrade for your 2010 or 2011 Camaro. This intake system offers the ultimate in Cold Air induction systems. The intake starts with a one-piece roto-molded air box, alleviating all the faults of your factory intake. Designed for high-performance gas and diesel applications, the intake started with a one-piece roto-molded air box and now has tubes constructed of cross-linked, high-density Polyethylene to maintain proper mass airflow readings and calibration. Furthering promoting airflow, many models include a built-in velocity stack. This product effectively increases airflow while maintaining proper air/fuel ratios, so you won’t have to worry about recalibration. If you’re in the market for improved horsepower, torque, and mpg, invest in an Airaid Synthaflow MXP intake system for your 2010 and 2011 Camaro. Available at Rick’s Camaro today!   Learn More
$359.99 Kit
Camaro Vararam Power Wedge, LS3, 2010-2013 Part # 33-10323
8-12 HP Gain! Increases Air Flow Up To 10% Easy Bolt On Installation The Power wedge was born from the VRX Intake manifold program. Our research showed that most of the OEM manifolds had the intake manifold neck pointed upward at about 8 degrees. This is done in order to clear the water pumps and to soften throttle tip in response. In this position , at wide open throttle the blade extends into the manifold neck and plenum up to 1 full inch downward angle position. This blocks a portion of the lower section of the flow path. In short This means that when you are at WIDE open throttle you are only getting about 88-92% of the flow that is possible from whatever throttle body you are running. The Power wedge can be used on a stock car or a car making insane HP numbers, stroker motors and supercharged applications. They all work with the "VR Power Wedge!" The Torque Curve will amaze you! It will be from 2,000RPM all the way to red line! Learn More
$119.99 ea.
Camaro Flame Thrower Kit, Single Exhaust, 1967-2014 Part # 33-12375
Ultimate Hot Rod Accessory Flames Shoot Up To 20 Feet On Command! Kit Includes Control Box, Activation Button, Wiring And Diagram Spark Plug And Coil Not Included For Recreational Use Only, Please Check Local Ordinances Flame thrower kits give your 1967-2014 Camaro bad boy appeal. After all, that's what hot rodding is all about. Rick's Camaro offers Autoloc flame thrower kits for exhibition use. These kits allow you to shoot flames up to 20' from your lowrider, gasser, or even show classic's exhaust on command. Talk about an attention grabber! This kit comes with detailed instructions and wiring diagram to make your project easier. Whether your 1967-2014 Camaro is stock or an all out hot rod, you can count on Rick's Camaro for all your needs. PLEASE NOTE: This item is meant for recreational and exhibition use only. Check local ordinances concerning use. Neither Eckler's nor Autoloc assumes liabity for any loss, injury or property damage incurred by use of this product. FOR SHOW USE ONLY, NOT FOR STREET USE. NOTE: This item is meant for recreational and exhibition use only. Check local ordinances concerning use. Neither Eckler's nor Autoloc assumes liability for any loss, injury or property damage incurred by use of this product. FOR SHOW USE ONLY, NOT FOR STREET USE. Learn More
$94.99 Kit
Camaro Radiator SS V8 TOC, 2010-2012 Part # 33-12440
Engineered For  2010, 2011, And 2012 Camaro SS V8 Includes Billet Radiator Cap No Modification Required Made In The USA   For over 25 years, C&R Racing has supplied cooling systems for Champions in NASCAR, IndyCar, NHRA, ALMS, Grand-Am, & SCCA. Now you can experience the same level of quality cooling products, engineered for  your 2010, 2011, and 2012 Camaro SS V8. This C&R Racing Certified LS Series Radiator installs the same as the factory radiator. It uses  the factory fans, billet mounting brackets and hoses including the transmission lines, factory A/C condenser and power steering cooler and the air duct seals across the top and sides that seal the radiator to the core support. This forces all the cool air into the radiator that will otherwise go around and not provide proper cooling. Also includes a billet radiator cap. Recommended  for street or track use up to 600 HP. Trust Rick's Camaro for your all your performance needs. Learn More
$999.99 ea.
Items: 1 to 28 of 38 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. Next
Grid  |  List
3