Product Experts Available 1-800-359-7717

2010 CAMARO 2LT EXHAUST

Search Term: 'All Parts'
Category: 'Exhaust'
Vehicle: '2010 CHEVY CAMARO 2LT'
Items: 1 to 28 of 64 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. 3
  4. Next
Grid  |  List
Best Sellers
Insulating Exhaust Wrap Part # 88-0173-1
Reduces Under-Hood Temperatures up to 70% Increases Horsepower & Fuel Efficiency Withstands Heat up to 2000 Degrees  The original Exhaust Insulating Wrap was developed over 12 years ago by Thermo-Tec. Exhaust Insulating Wrap is an innovative way to create more horsepower and reduce under-hood temperatures. Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust scavenging is produced, along with lower intake temperatures. Exhaust Insulating Wrap withstands continuous heat up to 2000°F, and contains no asbestos. Thermo-Tec exhaust wrap will not over-insulate a system when properly installed due to a proprietary coating developed by Thermo-Tec - Thermal Conduction Technology (TCT) - that conducts heat across the wrap's surface. This coating controls heat build-up and dissipation. Just wrap it around your exhaust pipe and secure with lock ties P/N 88-0174-1. Protect wrap with Hi-Heat Coating spray P/N 88-0175-1. Wrap roll is 50' x 2" & 1/16" thick, which is enough to cover one header or exhaust pipe.   Learn More
$51.99 rl.
Exhaust Wrap, Stainless Steel Locking Ties Part # 88-0174-1
Cut-To-Length Narrow To Fit In Tight Locations Easy Slide-Through Fasteners To secure your Exhaust Wrap use, Stainless Steel Locking Ties. For primary tubes use 9-inch, for collectors use 18-inch. The ties can be used anywhere there is extreme heat (up to 2500 F). Learn More
$34.99 Kit
Camaro Exhaust Muffler Clamp, Steel, 2-1/4", 1967-2011 Part # RC-109
Replacement Clamp This Camaro replacement exhaust muffler clamp has been manufactured to meet or exceed factory specifications and performance. You will find the fit, finish and function will work perfectly for your Camaro. You will also be pleased to know that Rick's has sourced this exhaust muffler clamp among other possible parts as the best choice for your repair or restoration project. Learn More
$3.99 ea.
Camaro Exhaust System, B&B Sport,V-8/SS,2010-2011 Part # 790404
T304 Stainless Steel 3" Pipe Mandel Bent Pipes Increases Up To 10 Hp And 11ft/lb Torque Fully Polished Muffler And Tips 4.5" Round Double Walled Tips Limited Lifetime Warranty Billy Boat Performance Exhaust has been setting the pace for high performance stainless steel exhaust systems for 20 years now. B&B applies its deep racing heritage to craft one of the finest exhaust systems available. Continuing in that tradition B&B has recently introduced a line of exhaust systems for the new 5th Generation Chevy Camaro. B&B has designed a muffler specifically for the Camaro using their proprietary Purge Resonance Technology or PRT. Hand fabricated out of T304 stainless steel the muffler offers increased exhaust flow and emits a nice deep muscle car bark at idle, acceleration and cruising speeds while all but eliminating the unwanted in-cabin, low frequency resonation. Performance increases of 10hp and 11ft/lbs on the V8 were seen on their in house chassis dyno. Learn More

Was: $1,399.99 Kit

Now: $1,299.99 Kit
Camaro Exhaust System, Borla S Type Cat-Back, 6.2L, 2010-2013 Part # 790402
Increased Horsepower & Fuel Economy Sport Type Mufflers Have A More Aggressive Sound Designed For Ground Effects 304 Stainless, Mandrel Bends Fits LS3 & L99 Engines, Automatic & Manual Transmissions Million-Mile Warranty Learn More

Was: $1,209.99 Kit

Now: $1,099.99 Kit
Camaro Cat-Back Performance Exhaust, Stainless, V6, 2010-2013 Part # 33-11850
100% Stainless Steel Construction Dyno Tested To Improve Horsepower And Torque Dual Split Rear Exit Exhaust Tubing Size 2.5" Exhaust Tip Size 4" Mandral-Bent Pipe Deep Exhaust Tone Not For Convertible Made In USA   This Cat-Back system for your 2010, 2011, 2012, 2013 Camaro will provide the power increase and exhaust sound your looking for. Ricks Camaros offers this Cat-Back Performance Exhaust system as an easy bolt on replacement for your factory exhaust. This system has been tested and is proven to show horsepower and torque increases in a broad RPM range. This system also offers a deep exhaust tone, notifying everybody that your coming there way. Your 2010, 2011, 2012, 2013 Camaro will not only perform better, it will sound better, thanks to this easy to install, bolt on Cat-Back exhaust system. Trust Ricks Camaros for all your parts needs.  NOTE: Not For Convertible Learn More
$829.99 Set
Camaro Exhaust, Pacesetter, 2010-2011 Part # 724604
2-1/2" Aluminized Pipes Includes Resonators, Pipes, Mufflers & Tips Fits V6 & V8 Cars Made In The USA Learn More
$679.99 Kit
Camaro Exhaust System, Borla "Touring" Cat-Back With Tips, 6.2L, 2010-2013 Part # 790401
Increased Horsepower & Fuel Economy Touring Mufflers Have A Milder Sound 304 Stainless, Mandrel Bends Polished Stainless Tips Fits LS3 & L99 Engines, Automatic & Manual Transmissions Million-Mile Warranty      Warning: Will not work with ground effects. Learn More

Was: $1,327.99 Kit

Now: $1,199.99 Kit
Camaro Exhaust System, Borla S Type Cat-Back With Tips, 6.2L, 2010-2013 Part # 790400
Increased Horsepower & Fuel Economy Sport Type Mufflers Have A More Aggressive Sound 304 Stainless, Mandrel Bends Polished Stainless Tips Fits LS3 & L99 Engines, Automatic & Manual Transmissions Million-Mile Warranty     Warning: Will not work with ground effects. Learn More

Was: $1,294.99 Kit

Now: $1,199.99 Kit
Camaro Flowmaster Dual Exhaust System, American Thunder, 3"Cat-Back, Loud, V8, With Ground Effects, 2010-2013 Part # 724308
Mandrel Bent 16-Gauge 409 Stainless Steel Tubing Aggressive And Powerful Exterior Exhaust Tone Includes Hangers and Hardware For Easy Installation Connects Behind Factory Catalytic Converter Dyno-Tuned for Maximum Performance For Use On V8 Cars With GFX Package Learn More
$929.99 Kit
Camaro Exhaust Kit, Axle Back, Stainless Steel, V6, 2010-2014 Part # 33-12928
Increased Horsepower And Torque Throughout RPM Improved Throttle Response Improved Fuel Economy Powerful Exhaust Note Intermediate Pipe Diameter- 2 1/4" Tailpipe Diameter- 2 1/4" Tip Outlet Size- 4" The Exhaust Tip Has A Stainless Steel Finish Upgrade the look and sound of your 2010, 2011, 2012, 2013, or 2014 Camaro's exhaust system with one of our tuned exhaust kits. They deliver a great performance sound and reduced restriction, which promotes increased power - especially when combined with other performance parts. Whether you're looking for a street legal sound or a completely off-roading system, Rick's Camaro has you covered. Our exhaust kits are designed for simple remove-and-replace installation with included instructions, for a quick and hassle-free changeover. The kit features a double walled stainless steel construction with included muffler. Trust Rick's Camaro for all your 5th Gen Camaro performance needs. Learn More
$599.99 Kit

New!

Camaro Flowmaster Dual Exhaust System, American Thunder, 3"Cat-Back, Loud, V8, W/O Ground Effects, 2010-2013 Part # 724307
Mandrel Bent 16-Gauge 409 Stainless Steel Tubing Aggressive And Powerful Exterior Exhaust Tone Includes Hangers and Hardware For Easy Installation Connects Behind Factory Catalytic Converter Dyno-Tuned for Maximum Performance For Use On V8 Cars Without GFX Package   Learn More
$936.99 Kit
Camaro Rear Section Exhaust System, Stainless Steel, V6, 2010-2013 Part # 33-11852
Stainless Steel Construction Single Split Rear Exit Pipe Diameter 2.25" Tip Diameter 3.5" Tip Desctiption Single Round Rolled Angle-Cut Lined Does Not Fit 2013 Quad-Tip RS Model Made In USA Your 2010, 2011, 2012, 2013 Camaro needs a strong shot of performance. Ricks Camaros offers this Borla Rear Section Exhaust System for your V6 Camaro. Made from high quality stainless steel 2.25" pipes, with 3.5" rolled angle-cut exhaust tips. This system increase exhaust tone and level well into V8 territory. For the best sound and performance for your 2010, 2011, 2012, 2013 Camaro, this Borla system is right for the task at hand. Trust Ricks Camaros for all your parts needs. Learn More
$799.99 Set
Camaro American Thunder Cat-Back Exhaust, V6, 2010-2013 Part # 33-13041
Stainless Steel Construction Fits Coupe And Convertible Models Includes Scavenger X-Pipe Inlet Diameter is 2.5 Inches, Outlet Diameter Is 3 Inches Features Dual Rear Exits Made In The USA This kit is for the person who is looking to install a complete Cat-back dual exhaust system with an aggressive tone on their 2010, 2011, 2012, or 2013 Camaro. With easy fit in mind, these systems are mandrel bent for maximum performance and include specially selected mufflers. American Thunder systems generally deliver an aggressive interior and exterior tone and are suited to the enthusiast who wants their performance to be heard. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation. Trust Rick's Camaro for all your performance needs. Learn More
$929.99 Kit

New!

Camaro Exhaust System, Striker, Cat-Back, Sport, Stainless Steel, 2010-2013 Part # 790414
High Grade T304 Stainless Steel Mirror Polished Pipes, Mufflers TIG Welded For Superior Strength and Visual Appeal Angle-Cut, 4" Double Wall Design, Polished Stainless Steel Tips Mandrel Bent Piping Increased Horsepower And Enhanced Sound Straight-Through Race Mufflers Limited Lifetime Warranty Learn More
$749.99 Kit
Camaro Exhaust,Magnaflow,6.2L,Cat Back,3" Exit,2010-2013 Part # 724519
Dual Center Exit Custom Rear Fascia Required For Installation Lifetime Warranty 3" Tubing Dyno Tested And Proven To Make Power, Performance Gains In Horsepower And Torque, Great Sound -Has A Smooth; Deep Tone, Easy To Install, Mandrel-Bent. All Welded. Built To Last. Learn More
$1,299.99 Set
Camaro Exhaust System, Striker, Cat-Back, Stainless Steel, 2010-2013 Part # 790413
High Grade T304 Stainless Steel Mirror Polished Pipes, Mufflers TIG Welded For Superior Strength and Visual Appeal Angle-Cut, 4" Double Wall Design, Polished Stainless Steel Tips Mandrel Bent Piping Increased Horsepower And Enhanced Sound Limited Lifetime Warranty Learn More
$749.99 Kit
Camaro Exhaust System, Borla Cat-Back, Three Inch, With X Pipe 6.2L, 2010-2011 Part # 790409
Increased Horsepower & Fuel Economy 304 Stainless, Mandrel Bends Fits LS3 & L99 Engines, Automatic & Manual Transmissions 4.5" Exhaust Tips Million-Mile Warranty Learn More

Was: $1,849.99 Kit

Now: $1,499.99 Kit
Camaro Exhaust,Magnaflow,6.2L,Cat Back,2.5" Exit,2010-2013 Part # 724518
Dual Center Exit Custom Rear Fascia Required For Installation 4 x 9 x 14in. Muffler 2.5" Tubing Lifetime Warranty Dyno Tested And Proven To Make Power, Performance Gains In Horsepower And Torque, Great Sound -Has A Smooth; Deep Tone, Easy To Install, Mandrel-Bent. All Welded. Built To Last. Learn More
$1,199.99 Set
Camaro Exhasut Headers, Cat4ward, Stainless Steel, V6, 2010-2014 Part # 33-12930
Increased Horsepower And Torque Throughout RPM Improved Throttle Response Improved Fuel Economy Powerful Exhaust Note Primary Tube Diameter- 1 3/4" The Collector Attachment Is A Ball And Socket Flange Collector Diameter- 2.5IN Features Stainless Steel, Silver, Or Titanium Finishes Looking for an easy way to increase the horsepower and torque on your 2010, 2011, 2012, 2013, or 2014 Camaro V6? Look no further with Rick's Camaro Cat4ward Stainless Steel Headers! These headers are designed with 3/8 in. thick laser-cut flanges, mandrel-bent primary tubes, and feature JBA's patented Firecone merge collectors. This kit features the mounting hardware and instruction to properly install this on your V6 Camaro. Trust Rick's Camaro for all your performance needs. Learn More
$599.99 Kit

New!

Camaro Exhaust, GM Performance Parts, V6 Only, 2010-2011 Part # 724608
New Mufflers, Tips, Pipes & Hangers From the Axle-Back For V6 Only Upgrade the look and sound of your Camaro's exhaust system with one of our tuned, emissions-legal bolt-on exhuast kits. They deliver a great performance sound and reduced restriction, which promotes increased power - especially when combined with other performance parts. Whether you're looking for a street legal sound or a completely off-roading system, GM Performance Parts has you covered. Our exhaust kits are designed for simple remove-and-replace installation, for a quick and hassle-free changeover. Learn More
$949.99 Kit
Camaro Exhaust System, B&B Classic,V-6,2010-2011 Part # 790405
T304 Stainless Steel 2.5" Pipe Mandel Bent Pipes Increases Up To 10 Hp And 11ft/lb Torque Fully Polished Muffler And Tips 4.0" Round Double Walled Tips Limited Lifetime Warranty Billy Boat Performance Exhaust has been setting the pace for high performance stainless steel exhaust systems for 20 years now. B&B applies its deep racing heritage to craft one of the finest exhaust systems available. Continuing in that tradition B&B has recently introduced a line of exhaust systems for the new 5th Generation Chevy Camaro. B&B has designed a muffler specifically for the Camaro using their proprietary Purge Resonance Technology or PRT. Hand fabricated out of T304 stainless steel the muffler offers increased exhaust flow and emits a nice deep muscle car bark at idle, acceleration and cruising speeds while all but eliminating the unwanted in-cabin, low frequency resonation. Performance increases of 5hp and 5ft/lbs on the V6 were seen on their in house chassis dyno. Learn More

Was: $1,399.99 Kit

Now: $1,299.99 Kit
Camaro Exhaust System, Borla, Rear Section,2010-2013 Part # 790420
Adds a Loud, Aggressive Sound Increased Horsepower & Fuel Economy 304 Stainless, Mandrel Bends 4.5" Exhaust Tips Million-Mile Warranty Used With Factory Ground Effects Package Used With 6.2L V-8 Learn More

Was: $789.99 Kit

Now: $699.99 Kit
Camaro Exhaust System, Borla, Rear Section, ATAK, 6.2L, 2010-2013 Part # 790411
Adds a Loud, Aggressive Sound Increased Horsepower & Fuel Economy 304 Stainless, Mandrel Bends 4.5" Exhaust Tips Million-Mile Warranty This Borla ATAK (Acoustically-Tuned Applied Kinetics) exhaust rear section is acoustically tuned to produce the highest decibel levels of any Borla street-legal product, while maintaining sound clarity. Learn More

Was: $879.99 Kit

Now: $799.99 Kit
Camaro Exhaust System, Borla Cat-Back, ATAK, 6.2L, 2010-2011 Part # 790410
Adds a Loud, Aggressive Sound Increased Horsepower & Fuel Economy 304 Stainless, Mandrel Bends Fits LS3 & L99 Engines, Automatic & Manual Transmissions 4.5" Exhaust Tips Million-Mile Warranty This Borla ATAK (Acoustically-Tuned Applied Kinetics) Cat-back exhaust system is acoustically tuned to produce the highest decibel levels of any Borla street-legal product, while maintaining sound clarity. Learn More

Was: $1,599.99 Kit

Now: $1,399.99 Kit
Camaro Exhaust Kit, SS Axle Back, Stainless Steel, Sport, 2010-2013 Part # 33-10139
Full Stainless Steel Material Mirror Polished TIG Welded For Strength And Superior Visual Appearance 4" Double Wall Design Polished Tips With Angle Cut Mandrel Bent Piping Straight Through Racing Mufflers Increased HP Improved Sound Lifetime Warranty Want more sound from your Camaro, this axle back ss kit will give you just that! Made of Stainless steel and is mandrel bent for the smooth flowing exhaust and straight through race mufflers. Polished to a mirror finish with 4" double wall designed tips which are also polished and have a angle cut end. This system comes with a lifetime warranty to the original purchaser. Learn More
$299.99 Kit
Items: 1 to 28 of 64 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. 3
  4. Next
Grid  |  List
4