Skip to Main Content »

1-800-359-7717

Exhaust Systems for 2010 Chevy Camaro Ls

0  Items Total: $0.00 View Cart Checkout

You're currently on:

2010 CHEVY CAMARO LS

Search Term: 'All Parts'
Category: 'Exhaust Systems'
Vehicle: '2010 CHEVY CAMARO LS'

21 Item(s) Show per page
View as: Grid  List  Sort by
Camaro Exhaust System, B&B Sport,V-8/SS,2010-2011 Part # 790404
T304 Stainless Steel 3" Pipe Mandel Bent Pipes Increases Up To 10 Hp And 11ft/lb Torque Fully Polished Muffler And Tips 4.5" Round Double Walled Tips Limited Lifetime Warranty Billy Boat Performance Exhaust has been setting the pace for high performance stainless steel exhaust systems for 20 years now. B&B applies its deep racing heritage to craft one of the finest exhaust systems available. Continuing in that tradition B&B has recently introduced a line of exhaust systems for the new 5th Generation Chevy Camaro. B&B has designed a muffler specifically for the Camaro using their proprietary Purge Resonance Technology or PRT. Hand fabricated out of T304 stainless steel the muffler offers increased exhaust flow and emits a nice deep muscle car bark at idle, acceleration and cruising speeds while all but eliminating the unwanted in-cabin, low frequency resonation. Performance increases of 10hp and 11ft/lbs on the V8 were seen on their in house chassis dyno. Learn More
$1,299.99 Kit

Add to Wishlist

Camaro Exhaust System, Borla S Type Cat-Back, 6.2L, 2010-2013 Part # 790402
Increased Horsepower & Fuel Economy Sport Type Mufflers Have A More Aggressive Sound Designed For Ground Effects 304 Stainless, Mandrel Bends Fits LS3 & L99 Engines, Automatic & Manual Transmissions Million-Mile Warranty Learn More
$1,099.99 Kit

Add to Wishlist

Camaro Cat-Back Performance Exhaust, Stainless, V6, 2010-2013 Part # 33-11850
100% Stainless Steel Construction Dyno Tested To Improve Horsepower And Torque Dual Split Rear Exit Exhaust Tubing Size 2.5" Exhaust Tip Size 4" Mandral-Bent Pipe Deep Exhaust Tone Not For Convertible Made In USA   This Cat-Back system for your 2010, 2011, 2012, 2013 Camaro will provide the power increase and exhaust sound your looking for. Ricks Camaros offers this Cat-Back Performance Exhaust system as an easy bolt on replacement for your factory exhaust. This system has been tested and is proven to show horsepower and torque increases in a broad RPM range. This system also offers a deep exhaust tone, notifying everybody that your coming there way. Your 2010, 2011, 2012, 2013 Camaro will not only perform better, it will sound better, thanks to this easy to install, bolt on Cat-Back exhaust system. Trust Ricks Camaros for all your parts needs.  NOTE: Not For Convertible Learn More
$829.99 Set

Add to Wishlist

Camaro Exhaust, Pacesetter, 2010-2011 Part # 724604
2-1/2" Aluminized Pipes Includes Resonators, Pipes, Mufflers & Tips Fits V6 & V8 Cars Made In The USA Learn More
$679.99 Kit

Add to Wishlist

Camaro Exhaust System, Borla "Touring" Cat-Back With Tips, 6.2L, 2010-2013 Part # 790401
Increased Horsepower & Fuel Economy Touring Mufflers Have A Milder Sound 304 Stainless, Mandrel Bends Polished Stainless Tips Fits LS3 & L99 Engines, Automatic & Manual Transmissions Million-Mile Warranty      Warning: Will not work with ground effects. Learn More
$1,199.99 Kit

Add to Wishlist

Camaro Exhaust System, Borla S Type Cat-Back With Tips, 6.2L, 2010-2013 Part # 790400
Increased Horsepower & Fuel Economy Sport Type Mufflers Have A More Aggressive Sound 304 Stainless, Mandrel Bends Polished Stainless Tips Fits LS3 & L99 Engines, Automatic & Manual Transmissions Million-Mile Warranty     Warning: Will not work with ground effects. Learn More
$1,199.99 Kit

Add to Wishlist

Camaro Flowmaster Dual Exhaust System, American Thunder, 3"Cat-Back, Loud, V8, With Ground Effects, 2010-2013 Part # 724308
Mandrel Bent 16-Gauge 409 Stainless Steel Tubing Aggressive And Powerful Exterior Exhaust Tone Includes Hangers and Hardware For Easy Installation Connects Behind Factory Catalytic Converter Dyno-Tuned for Maximum Performance For Use On V8 Cars With GFX Package Learn More
$929.99 Kit

Add to Wishlist

Camaro Flowmaster Dual Exhaust System, American Thunder, 3"Cat-Back, Loud, V8, W/O Ground Effects, 2010-2013 Part # 724307
Mandrel Bent 16-Gauge 409 Stainless Steel Tubing Aggressive And Powerful Exterior Exhaust Tone Includes Hangers and Hardware For Easy Installation Connects Behind Factory Catalytic Converter Dyno-Tuned for Maximum Performance For Use On V8 Cars Without GFX Package   Learn More
$936.99 Kit

Add to Wishlist

Camaro Rear Section Exhaust System, Stainless Steel, V6, 2010-2013 Part # 33-11852
Stainless Steel Construction Single Split Rear Exit Pipe Diameter 2.25" Tip Diameter 3.5" Tip Desctiption Single Round Rolled Angle-Cut Lined Does Not Fit 2013 Quad-Tip RS Model Made In USA Your 2010, 2011, 2012, 2013 Camaro needs a strong shot of performance. Ricks Camaros offers this Borla Rear Section Exhaust System for your V6 Camaro. Made from high quality stainless steel 2.25" pipes, with 3.5" rolled angle-cut exhaust tips. This system increase exhaust tone and level well into V8 territory. For the best sound and performance for your 2010, 2011, 2012, 2013 Camaro, this Borla system is right for the task at hand. Trust Ricks Camaros for all your parts needs. Learn More
$799.99 Set

Add to Wishlist

Camaro Exhaust System, Striker, Cat-Back, Sport, Stainless Steel, 2010-2013 Part # 790414
High Grade T304 Stainless Steel Mirror Polished Pipes, Mufflers TIG Welded For Superior Strength and Visual Appeal Angle-Cut, 4" Double Wall Design, Polished Stainless Steel Tips Mandrel Bent Piping Increased Horsepower And Enhanced Sound Straight-Through Race Mufflers Limited Lifetime Warranty Learn More
$749.99 Kit

Add to Wishlist

Camaro Exhaust,Magnaflow,6.2L,Cat Back,3" Exit,2010-2013 Part # 724519
Dual Center Exit Custom Rear Fascia Required For Installation Lifetime Warranty 3" Tubing Dyno Tested And Proven To Make Power, Performance Gains In Horsepower And Torque, Great Sound -Has A Smooth; Deep Tone, Easy To Install, Mandrel-Bent. All Welded. Built To Last. Learn More
$1,299.99 Set

Add to Wishlist

Camaro Exhaust System, Striker, Cat-Back, Stainless Steel, 2010-2013 Part # 790413
High Grade T304 Stainless Steel Mirror Polished Pipes, Mufflers TIG Welded For Superior Strength and Visual Appeal Angle-Cut, 4" Double Wall Design, Polished Stainless Steel Tips Mandrel Bent Piping Increased Horsepower And Enhanced Sound Limited Lifetime Warranty Learn More
$749.99 Kit

Add to Wishlist

Camaro Exhaust System, Borla Cat-Back, Three Inch, With X Pipe 6.2L, 2010-2011 Part # 790409
Increased Horsepower & Fuel Economy 304 Stainless, Mandrel Bends Fits LS3 & L99 Engines, Automatic & Manual Transmissions 4.5" Exhaust Tips Million-Mile Warranty Learn More
$1,499.99 Kit

Add to Wishlist

Camaro Exhaust,Magnaflow,6.2L,Cat Back,2.5" Exit,2010-2013 Part # 724518
Dual Center Exit Custom Rear Fascia Required For Installation 4 x 9 x 14in. Muffler 2.5" Tubing Lifetime Warranty Dyno Tested And Proven To Make Power, Performance Gains In Horsepower And Torque, Great Sound -Has A Smooth; Deep Tone, Easy To Install, Mandrel-Bent. All Welded. Built To Last. Learn More
$1,199.99 Set

Add to Wishlist

Camaro Exhaust, GM Performance Parts, V6 Only, 2010-2011 Part # 724608
New Mufflers, Tips, Pipes & Hangers From the Axle-Back For V6 Only Upgrade the look and sound of your Camaro's exhaust system with one of our tuned, emissions-legal bolt-on exhuast kits. They deliver a great performance sound and reduced restriction, which promotes increased power - especially when combined with other performance parts. Whether you're looking for a street legal sound or a completely off-roading system, GM Performance Parts has you covered. Our exhaust kits are designed for simple remove-and-replace installation, for a quick and hassle-free changeover. Learn More
$949.99 Kit

Add to Wishlist

Camaro Exhaust System, B&B Classic,V-6,2010-2011 Part # 790405
T304 Stainless Steel 2.5" Pipe Mandel Bent Pipes Increases Up To 10 Hp And 11ft/lb Torque Fully Polished Muffler And Tips 4.0" Round Double Walled Tips Limited Lifetime Warranty Billy Boat Performance Exhaust has been setting the pace for high performance stainless steel exhaust systems for 20 years now. B&B applies its deep racing heritage to craft one of the finest exhaust systems available. Continuing in that tradition B&B has recently introduced a line of exhaust systems for the new 5th Generation Chevy Camaro. B&B has designed a muffler specifically for the Camaro using their proprietary Purge Resonance Technology or PRT. Hand fabricated out of T304 stainless steel the muffler offers increased exhaust flow and emits a nice deep muscle car bark at idle, acceleration and cruising speeds while all but eliminating the unwanted in-cabin, low frequency resonation. Performance increases of 5hp and 5ft/lbs on the V6 were seen on their in house chassis dyno. Learn More
$1,299.99 Kit

Add to Wishlist

Camaro Exhaust System, Borla, Rear Section,2010-2013 Part # 790420
Adds a Loud, Aggressive Sound Increased Horsepower & Fuel Economy 304 Stainless, Mandrel Bends 4.5" Exhaust Tips Million-Mile Warranty Used With Factory Ground Effects Package Used With 6.2L V-8 Learn More
$699.99 Kit

Add to Wishlist

Camaro Exhaust System, Borla, Rear Section, ATAK, 6.2L, 2010-2013 Part # 790411
Adds a Loud, Aggressive Sound Increased Horsepower & Fuel Economy 304 Stainless, Mandrel Bends 4.5" Exhaust Tips Million-Mile Warranty This Borla ATAK (Acoustically-Tuned Applied Kinetics) exhaust rear section is acoustically tuned to produce the highest decibel levels of any Borla street-legal product, while maintaining sound clarity. Learn More
$799.99 Kit

Add to Wishlist

Camaro Exhaust System, Borla Cat-Back, ATAK, 6.2L, 2010-2011 Part # 790410
Adds a Loud, Aggressive Sound Increased Horsepower & Fuel Economy 304 Stainless, Mandrel Bends Fits LS3 & L99 Engines, Automatic & Manual Transmissions 4.5" Exhaust Tips Million-Mile Warranty This Borla ATAK (Acoustically-Tuned Applied Kinetics) Cat-back exhaust system is acoustically tuned to produce the highest decibel levels of any Borla street-legal product, while maintaining sound clarity. Learn More
$1,399.99 Kit

Add to Wishlist

Camaro Exhaust Kit, SS Axle Back, Stainless Steel, Cruze, 2010-2013 Part # 33-10137
Full Stainless Steel Material Mirror Polished TIG Welded For Strength And Superior Visual Appearance 4" Double Wall Design Polished Tips With Angle Cut Mandrel Bent Piping Straight Through Racing Mufflers Increased HP Improved Sound Lifetime Warranty Want more sound from your Camaro, this axle back ss kit will give you just that! Made of Stainless steel and is mandrel bent for the smooth flowing exhaust and straight through race mufflers. Polished to a mirror finish with 4" double wall designed tips which are also polished and have a angle cut end. This system comes with a lifetime warranty to the original purchaser. Learn More
$299.99 Kit

Add to Wishlist

Camaro Exhaust Kit, SS Axle Back, Stainless Steel, Sport, 2010-2013 Part # 33-10139
Full Stainless Steel Material Mirror Polished TIG Welded For Strength And Superior Visual Appearance 4" Double Wall Design Polished Tips With Angle Cut Mandrel Bent Piping Straight Through Racing Mufflers Increased HP Improved Sound Lifetime Warranty Want more sound from your Camaro, this axle back ss kit will give you just that! Made of Stainless steel and is mandrel bent for the smooth flowing exhaust and straight through race mufflers. Polished to a mirror finish with 4" double wall designed tips which are also polished and have a angle cut end. This system comes with a lifetime warranty to the original purchaser. Learn More
$299.99 Kit

Add to Wishlist

21 Item(s) Show per page
View as: Grid  List  Sort by
3