Product Experts Available 1-800-359-7717

2010 CAMARO TRANSFORMERS EXHAUST

Search Term: 'All Parts'
Category: 'Exhaust'
Vehicle: '2010 CHEVY CAMARO TRANSFORMERS'
Items: 1 to 28 of 30 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. Next
Grid  |  List
Best Sellers
Insulating Exhaust Wrap Part # 88-0173-1
Reduces Under-Hood Temperatures up to 70% Increases Horsepower & Fuel Efficiency Withstands Heat up to 2000 Degrees  The original Exhaust Insulating Wrap was developed over 12 years ago by Thermo-Tec. Exhaust Insulating Wrap is an innovative way to create more horsepower and reduce under-hood temperatures. Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust scavenging is produced, along with lower intake temperatures. Exhaust Insulating Wrap withstands continuous heat up to 2000°F, and contains no asbestos. Thermo-Tec exhaust wrap will not over-insulate a system when properly installed due to a proprietary coating developed by Thermo-Tec - Thermal Conduction Technology (TCT) - that conducts heat across the wrap's surface. This coating controls heat build-up and dissipation. Just wrap it around your exhaust pipe and secure with lock ties P/N 88-0174-1. Protect wrap with Hi-Heat Coating spray P/N 88-0175-1. Wrap roll is 50' x 2" & 1/16" thick, which is enough to cover one header or exhaust pipe.   Learn More
$51.99 rl.
Exhaust Wrap, Stainless Steel Locking Ties Part # 88-0174-1
Cut-To-Length Narrow To Fit In Tight Locations Easy Slide-Through Fasteners To secure your Exhaust Wrap use, Stainless Steel Locking Ties. For primary tubes use 9-inch, for collectors use 18-inch. The ties can be used anywhere there is extreme heat (up to 2500 F). Learn More
$34.99 Kit
Thermo-Tec Insulating Header Manifold Blanket Part # 88-1350-3
Reduces Under-Hood Temperatures up to 70% Increases Horsepower & Fuel Efficiency Withstands Heat up to 2000 Degrees (2) 20" X 24" Blankets For V6 & V8 Applications The Header Manifold Blanket provides excellent heat-retention for exhaust headers and manifolds. This flexible heat shield simply clips into place on the upper portion of the header. The fabric side of the material should be facing the heat source, and the aluminized side facing away - offering protection from abrasion and harmful liquid spills. Learn More
$99.99 Set
Camaro Exhaust Cutout, 2-1/2" Part # 724606
Open Your Exhaust Up Before The Muffler 16ga. MIG Welded Steel With Three Bolt Flanges Includes Cap & Gasket Made In The USA Give your car the option to be loud when you want it to. Learn More
$79.99 ea.
Camaro Exhaust System, B&B Sport,V-8/SS,2010-2011 Part # 790404
T304 Stainless Steel 3" Pipe Mandel Bent Pipes Increases Up To 10 Hp And 11ft/lb Torque Fully Polished Muffler And Tips 4.5" Round Double Walled Tips Limited Lifetime Warranty Billy Boat Performance Exhaust has been setting the pace for high performance stainless steel exhaust systems for 20 years now. B&B applies its deep racing heritage to craft one of the finest exhaust systems available. Continuing in that tradition B&B has recently introduced a line of exhaust systems for the new 5th Generation Chevy Camaro. B&B has designed a muffler specifically for the Camaro using their proprietary Purge Resonance Technology or PRT. Hand fabricated out of T304 stainless steel the muffler offers increased exhaust flow and emits a nice deep muscle car bark at idle, acceleration and cruising speeds while all but eliminating the unwanted in-cabin, low frequency resonation. Performance increases of 10hp and 11ft/lbs on the V8 were seen on their in house chassis dyno. Learn More

Was: $1,399.99 Kit

Now: $1,299.99 Kit
Camaro Exhaust System, B&B Classic, V8/SS, 2010-2011 Part # 790403
T304 Stainless Steel 3" Pipe Mandel Bent Pipes Increases Up To 10 Hp And 11ft/lb Torque Fully Polished Muffler And Tips 4.5" Round Double Walled Tips Limited Lifetime Warranty Billy Boat Performance Exhaust has been setting the pace for high performance stainless steel exhaust systems for 20 years now. B&B applies its deep racing heritage to craft one of the finest exhaust systems available. Continuing in that tradition B&B has recently introduced a line of exhaust systems for the new 5th Generation Chevy Camaro. B&B has designed a muffler specifically for the Camaro using their proprietary Purge Resonance Technology or PRT. Hand fabricated out of T304 stainless steel the muffler offers increased exhaust flow and emits a nice deep muscle car bark at idle, acceleration and cruising speeds while all but eliminating the unwanted in-cabin, low frequency resonation. Performance increases of 10hp and 11ft/lbs on the V8 were seen on their in house chassis dyno. Learn More

Was: $1,399.99 Kit

Now: $1,299.99 Kit
Camaro Exhaust System, Borla S Type Cat-Back, 6.2L, 2010-2013 Part # 790402
Increased Horsepower & Fuel Economy Sport Type Mufflers Have A More Aggressive Sound Designed For Ground Effects 304 Stainless, Mandrel Bends Fits LS3 & L99 Engines, Automatic & Manual Transmissions Million-Mile Warranty Learn More

Was: $1,209.99 Kit

Now: $1,099.99 Kit
Camaro Exhaust, Pacesetter, 2010-2011 Part # 724604
2-1/2" Aluminized Pipes Includes Resonators, Pipes, Mufflers & Tips Fits V6 & V8 Cars Made In The USA Learn More
$679.99 Kit
Camaro Exhaust System, Borla "Touring" Cat-Back With Tips, 6.2L, 2010-2013 Part # 790401
Increased Horsepower & Fuel Economy Touring Mufflers Have A Milder Sound 304 Stainless, Mandrel Bends Polished Stainless Tips Fits LS3 & L99 Engines, Automatic & Manual Transmissions Million-Mile Warranty      Warning: Will not work with ground effects. Learn More

Was: $1,327.99 Kit

Now: $1,199.99 Kit
Camaro Exhaust System, Borla S Type Cat-Back With Tips, 6.2L, 2010-2013 Part # 790400
Increased Horsepower & Fuel Economy Sport Type Mufflers Have A More Aggressive Sound 304 Stainless, Mandrel Bends Polished Stainless Tips Fits LS3 & L99 Engines, Automatic & Manual Transmissions Million-Mile Warranty     Warning: Will not work with ground effects. Learn More

Was: $1,294.99 Kit

Now: $1,199.99 Kit
Camaro Flowmaster Dual Exhaust System, American Thunder, 3"Cat-Back, Loud, V8, With Ground Effects, 2010-2013 Part # 724308
Mandrel Bent 16-Gauge 409 Stainless Steel Tubing Aggressive And Powerful Exterior Exhaust Tone Includes Hangers and Hardware For Easy Installation Connects Behind Factory Catalytic Converter Dyno-Tuned for Maximum Performance For Use On V8 Cars With GFX Package Learn More
$929.99 Kit
Camaro Flowmaster Dual Exhaust System, American Thunder, 3"Cat-Back, Loud, V8, W/O Ground Effects, 2010-2013 Part # 724307
Mandrel Bent 16-Gauge 409 Stainless Steel Tubing Aggressive And Powerful Exterior Exhaust Tone Includes Hangers and Hardware For Easy Installation Connects Behind Factory Catalytic Converter Dyno-Tuned for Maximum Performance For Use On V8 Cars Without GFX Package   Learn More
$936.99 Kit
Camaro Exhaust System, Borla, Rear Section,2010-2013 Part # 790420
Adds a Loud, Aggressive Sound Increased Horsepower & Fuel Economy 304 Stainless, Mandrel Bends 4.5" Exhaust Tips Million-Mile Warranty Used With Factory Ground Effects Package Used With 6.2L V-8 Learn More

Was: $789.99 Kit

Now: $699.99 Kit
Camaro Exhaust System, Striker, Cat-Back, Sport, Stainless Steel, 2010-2013 Part # 790414
High Grade T304 Stainless Steel Mirror Polished Pipes, Mufflers TIG Welded For Superior Strength and Visual Appeal Angle-Cut, 4" Double Wall Design, Polished Stainless Steel Tips Mandrel Bent Piping Increased Horsepower And Enhanced Sound Straight-Through Race Mufflers Limited Lifetime Warranty Learn More
$749.99 Kit
Camaro Exhaust,Magnaflow,6.2L,Cat Back,3" Exit,2010-2013 Part # 724519
Dual Center Exit Custom Rear Fascia Required For Installation Lifetime Warranty 3" Tubing Dyno Tested And Proven To Make Power, Performance Gains In Horsepower And Torque, Great Sound -Has A Smooth; Deep Tone, Easy To Install, Mandrel-Bent. All Welded. Built To Last. Learn More
$1,299.99 Set
Camaro Exhaust System, Striker, Cat-Back, Stainless Steel, 2010-2013 Part # 790413
High Grade T304 Stainless Steel Mirror Polished Pipes, Mufflers TIG Welded For Superior Strength and Visual Appeal Angle-Cut, 4" Double Wall Design, Polished Stainless Steel Tips Mandrel Bent Piping Increased Horsepower And Enhanced Sound Limited Lifetime Warranty Learn More
$749.99 Kit
Camaro Exhaust System, Borla Cat-Back, Three Inch, With X Pipe 6.2L, 2010-2011 Part # 790409
Increased Horsepower & Fuel Economy 304 Stainless, Mandrel Bends Fits LS3 & L99 Engines, Automatic & Manual Transmissions 4.5" Exhaust Tips Million-Mile Warranty Learn More

Was: $1,849.99 Kit

Now: $1,499.99 Kit
Camaro Exhaust,Magnaflow,6.2L,Cat Back,2.5" Exit,2010-2013 Part # 724518
Dual Center Exit Custom Rear Fascia Required For Installation 4 x 9 x 14in. Muffler 2.5" Tubing Lifetime Warranty Dyno Tested And Proven To Make Power, Performance Gains In Horsepower And Torque, Great Sound -Has A Smooth; Deep Tone, Easy To Install, Mandrel-Bent. All Welded. Built To Last. Learn More
$1,199.99 Set
Camaro Exhaust, GM Performance Parts, V8 Only, 2010-2013 Part # 724609
New Mufflers, Tips, Pipes & Hangers From the Axle-Back For V8 Only Upgrade the look and sound of your Camaro's exhaust system with one of our tuned, emissions-legal bolt-on exhuast kits. They deliver a great performance sound and reduced restriction, which promotes increased power - especially when combined with other performance parts. Whether you're looking for a street legal sound or a completely off-roading system, GM Performance Parts has you covered. Our exhaust kits are designed for simple remove-and-replace installation, for a quick and hassle-free changeover. Learn More
$1,119.99 Kit
Camaro Exhaust, GM Performance Parts, V6 Only, 2010-2011 Part # 724608
New Mufflers, Tips, Pipes & Hangers From the Axle-Back For V6 Only Upgrade the look and sound of your Camaro's exhaust system with one of our tuned, emissions-legal bolt-on exhuast kits. They deliver a great performance sound and reduced restriction, which promotes increased power - especially when combined with other performance parts. Whether you're looking for a street legal sound or a completely off-roading system, GM Performance Parts has you covered. Our exhaust kits are designed for simple remove-and-replace installation, for a quick and hassle-free changeover. Learn More
$949.99 Kit
Camaro Exhaust System, B&B Classic,V-6,2010-2011 Part # 790405
T304 Stainless Steel 2.5" Pipe Mandel Bent Pipes Increases Up To 10 Hp And 11ft/lb Torque Fully Polished Muffler And Tips 4.0" Round Double Walled Tips Limited Lifetime Warranty Billy Boat Performance Exhaust has been setting the pace for high performance stainless steel exhaust systems for 20 years now. B&B applies its deep racing heritage to craft one of the finest exhaust systems available. Continuing in that tradition B&B has recently introduced a line of exhaust systems for the new 5th Generation Chevy Camaro. B&B has designed a muffler specifically for the Camaro using their proprietary Purge Resonance Technology or PRT. Hand fabricated out of T304 stainless steel the muffler offers increased exhaust flow and emits a nice deep muscle car bark at idle, acceleration and cruising speeds while all but eliminating the unwanted in-cabin, low frequency resonation. Performance increases of 5hp and 5ft/lbs on the V6 were seen on their in house chassis dyno. Learn More

Was: $1,399.99 Kit

Now: $1,299.99 Kit
Camaro Exhaust System, Borla, Rear Section, ATAK, 6.2L, 2010-2013 Part # 790411
Adds a Loud, Aggressive Sound Increased Horsepower & Fuel Economy 304 Stainless, Mandrel Bends 4.5" Exhaust Tips Million-Mile Warranty This Borla ATAK (Acoustically-Tuned Applied Kinetics) exhaust rear section is acoustically tuned to produce the highest decibel levels of any Borla street-legal product, while maintaining sound clarity. Learn More

Was: $879.99 Kit

Now: $799.99 Kit
Camaro Exhaust System, Borla Cat-Back, ATAK, 6.2L, 2010-2011 Part # 790410
Adds a Loud, Aggressive Sound Increased Horsepower & Fuel Economy 304 Stainless, Mandrel Bends Fits LS3 & L99 Engines, Automatic & Manual Transmissions 4.5" Exhaust Tips Million-Mile Warranty This Borla ATAK (Acoustically-Tuned Applied Kinetics) Cat-back exhaust system is acoustically tuned to produce the highest decibel levels of any Borla street-legal product, while maintaining sound clarity. Learn More

Was: $1,599.99 Kit

Now: $1,399.99 Kit
Camaro Flowmaster Dual Exhaust, American Thunder, 2.5" Axle-Back, Loud, V6, 2010-2013 Part # 724309
Mandrel Bent 16-Gauge 409 Stainless Steel Tubing Aggressive And Powerful Exterior Exhaust Tone Includes Hangers and Hardware For Easy Installation Connects Behind Rear Axle Requires Cutting But No Welding Dyno-Tuned for Maximum Performance Fits V6 LS And LT Learn More
$585.99 Kit
Camaro Flowmaster Dual Exhaust, American Thunder, 3" Hushpower Axle-Back, V8, With Ground Effects Package, 2010-2013 Part # 724311
Mandrel Bent 16-Gauge 409 Stainless Steel Tubing Aggressive And Powerful Exterior Exhaust Tone Includes Hangers and Hardware For Easy Installation Connects Behind Rear Axle Requires Cutting But No Welding Dyno-Tuned for Maximum Performance For Use On V8 Cars With GFX Package Learn More
$619.99 Kit
Camaro Flowmaster Dual Exhaust, American Thunder, 3" Hushpower Axle-Back, V8, 2010-2013 Part # 724310
Mandrel Bent 16-Gauge 409 Stainless Steel Tubing Aggressive And Powerful Exterior Exhaust Tone Includes Hangers and Hardware For Easy Installation Connects Behind Rear Axle Requires Cutting But No Welding Dyno-Tuned for Maximum Performance For Use On V8 Cars Without GFX Package Learn More
$619.99 Kit
Camaro Exhaust Cutout, 2-1/4" Part # 724605
Open Your Exhaust Up Before The Muffler 16ga. MIG Welded Steel With Three Bolt Flanges Includes Cap & Gasket Made In The USA Give your car the option to be loud when you want it to. Learn More
$69.99 ea.
Thermo-Tec Insulating Wrap, Graphite Black Part # 88-1349-3
Reduces Under-Hood Temperatures up to 70% Increases Horsepower & Fuel Efficiency Withstands Heat up to 2000 Degrees The original Exhaust Insulating Wrap was developed over 12 years ago by Thermo-Tec. Exhaust Insulating Wrap is an innovative way to create more horsepower and reduce under-hood temperatures. Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust scavenging is produced, along with lower intake temperatures. Exhaust Insulating Wrap withstands continuous heat up to 2000F, and contains no asbestos. Thermo-Tec exhaust wrap will not over-insulate a system when properly installed due to a proprietary coating developed by Thermo-Tec - Thermal Conduction Technology (TCT) - that conducts heat across the wrap's surface. This coating controls heat build-up and dissipation. Just wrap it around your exhaust pipe and secure with lock ties P/N 88-0174-1. Protect wrap with Hi-Heat Coating spray P/N 88-0175-1. Wrap roll is 50' x 2" & 1/16" thick, which is enough to cover one header or exhaust pipe. Learn More
$59.99 rl.
Items: 1 to 28 of 30 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. Next
Grid  |  List
1