Product Experts Available 1-800-359-7717

2011 CAMARO 2SS CHEVY ACCENTS

Search Term: 'All Parts'
Category: 'Accents'
Vehicle: '2011 CHEVY CAMARO 2SS'

Items: 1 to 28 of 75 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. 3
  4. Next
Grid  |  List
Best Sellers
Camaro Turn Signal Kit, Sequential, 2010-2013 Part # 790238
Prewired Harnesses For Easy Installation No Cutting Of Factory Wiring This sequential harnesses will convert the taillights on your 2010+ Camaro into Sequential Turn Signals. The kit contains two pre-wired harnesses that simply plug into your existing sockets. Return to stock operation at any time by unplugging the harnesses. It doesn't get any easier that this! Learn More

Was: $119.99 Kit

Now: $79.99 Kit
High Security Locking Hood Pin Set Part # 33-12359
Great Additional For Your Ride Can Be Used In Place Of Standard Hood Pins Protects Expensive Engine Parts And Acessories Kit Includes: Two Complete Locks Sets Lock Sets Include: Gaskets, Two Fully Threaded Pins With Nuts And Two Keys NOTE: Use With Stock Hood Latch NOTE: Requires Drilling Holes In Hood For Installation You have spent a lot of money making improvements to your engine, with high performace parts, chrome and billet accessories. Ecklers offers this High Security Locking Hood Pin Set for your security. This kit comes with high quality chrome plated fully threaded pins with nuts and two keys. With this locking hood pin set you can have the piece of mind knowing that your engine and all those high dollar accessories have an extra measure of security. This locking hood pin set can replace standard hood pins, it does require using your factory hood latch and drilling holes in your hood for installation if required. Learn More
$26.99 Set
Camaro Chrome Quarter Panel Side Louvers, 2010-2013 Part # 702219
1969-Style Louvers Are Made From Thermoformed TPO Plastic Chrome-Tech™ Chrome Laminated Finish Will Never Rust, Crack, Chip Or Peel Easily Installed Without Any Permanent Modifications To The Car Self-Adhesive No Drilling Required Give your Camaro the touch of retro that it's begging for with true 69' styled Quarter Moldings from Retro USA. Designed to flow into the factory louvers for enhanced depth. Quarter Moldings are constructed using Chrome-plated injection molded ABS with painted flat black accents. Pre-taped with 3M™ attachment tape plus pigtails insure easy and accurate installation. No permanent modifications are required. Learn More
$239.99 pr.
Camaro Gas Door Cap Cover "RS" Logo Polished Stainless Steel, 2010-2013 Part # 33-00143
100% Stainless Steel Polished Finish Will Not Tarnish, Fade Or Rust Adds A Unique Look & Style To Your Camaro Easy "Peel & Stick" Installation Takes Just Minutes Fits All 2010-2012 Coupe & Convertible Camaros Made In USA Official GM Licensed Product Dress up your Camaro with our new GM Licensed Gas Cap / Fuel Door Cover Trim. Easy to install and adds a unique style to your 5th Generation Camaro. Learn More
$53.99 ea.
Camaro Bezel Set, Turn Signal & Back-Up Lamp, 2010-2013 Part # 790222
Made From Lightweight Ultra-Chrome Six Piece Set Bezels For Front & Rear Turn Signals, & Back-Up Lamps Made In The USA The new 2010 Chevrolet Camaro is one of the hottest cars on the road today. This kit contains a total of six (6) pieces, made of our Ultra-Chrome™ material. Each trim piece fits on the perimeter surface of the front and rear sides marker lights. Installation takes only minutes; simply clean the area where the adhesive will bond to the plastic lens. PLEASE AVOID WASHING THE CAR OR GETTING THE AREA WET FOR 24 HOURS. 3M VHB REQUIRES A MINIMUM OF 24 HOURS TO ACQUIRE 50% OF ITS ULTIMATE ADHESION. Note: "Ultra-Chrome™" is a custom made material. We purchase a very high quality chrome film from our German supplier to which we laminate .060 black ABS sheet and later 3M VHB adhesive. This triple layer material is designed especially for exterior auto trim and will not corrode, delaminate or discolor. All "Ultra-Chrome™" trim items are supplies with a clear protective film which should be peeled off the piece, preferably a day or so after installalation so as not to chance pulling the trim off of your car. Once complete, stand back and admire you handiwork. After peeling off the protective film you may notice a slight "nickel" or "black chrome" appearance, this is the UV protective layer which will fade when exposed to sun light. Learn More
$49.99 Set
Camaro Chrome Hood Louver Ornaments, 2010-2013 Part # 702220
1969-Style "Ice-Cube Trays" Are Made From Thermoformed TPO Plastic Chrome-Tech™ Chrome Laminated Finish Will Never Rust, Crack, Chip Or Peel Easily Installed Without Any Permanent Modifications To The Car Self-Adhesive No Drilling Required Retro USA's 68'-69' styled Hood Vents give your Camaro a nostalgic and aggressive look. Hood Vents are chrome-plated injection molded ABS with painted flat black accents and uses stainless steel wire mesh. Pre-taped with 3M™ attachment tape plus pigtails insure easy and accurate installation. No permanent modifications are required. Learn More
$239.99 pr.
Camaro Quarter Panel Grill Inserts, Chrome, 2010-2013 Part # 790226
6-Piece Set Driver And Passenger Side Quality Chrome Plating 2010-2013 Camaro is the hottest thing on the road now. Set yours apart with this quality Quarter Panel Grill Inserts, Chrome; from Ricks Camaros. This Quarter Panel Grill Insert Set accents the stamped quarter panel vents on the 2010, 2011, 2012, 2013 Camaro to create a classic muscle car appearance. Trust Ricks Camaros for all your parts needs. Learn More

Was: $49.99 Set

Now: $39.99 Set
Camaro Transformers Autobot Chrome Locking Fuel Door, DefenderWorx, 2010-2014 Part # 33-11763
Billet Aluminum Construction Chrome Finish Easy Installation Features Autobot Logo Includes Two Keys Made In USA A Camaro transformers autobot chrome locking fuel cap will add upgraded style and protection to your cherished 2010, 2011, 2012, 2013, or 2014 Camaro. Manufactured by DefenderWorx out of billet aluminum, this locking fuel cap provides durable protection from intruders and the elements. The beautiful chrome finish and embroidered transformers logo will add a sleek look to your already sporty Camaro. When your are looking to supplement your 2010, 2011, 2012, 2013, or 2014 Camaro's exterior trim, invest in a DefenderWorx autobot locking fuel cap. Learn More
$200.99 ea.
Power Portal Hood "Wing Vents" Black Upper & Lower With Rectangular Chrome Mesh Part # 88-3207
Fits All Makes & Models (Universal Fit) Fits Fiberglass, Steel, Aluminum, Or Carbon Fiber Hoods Sets Car Apart From Others D.I.Y. Installation With Basic Hand Tools No Body Shop Visit Or Paint Work Needed Before Or After Installation Trim Is Chrome Plated Or Powder Coated To Last Besides looking awesome in chrome or black powder coat frames with contrasting or matching stainless steel and black mesh screens, these Wing Vents move a lot of hot air out of the engine bay. Wing Vents give a great stand-alone look. And they are a great compliment to the Power Portal Hood Window. NOTE: Some cars have extensive under hood ribbing for ?air slap? (Fiberglass and Carbon Fiber hoods tend to require a very little.) Check your car prior to purchasing our Wing Vents for fit and location. Learn More

Was: $269.99 pr.

Now: $189.99 pr.
Camaro Side Louver Inserts, Black, 2010-2014 Part # 790210
CNC Machined From 6061 Billet 1 Set Per Car 3M Adhesive-backed For Easy Installation 6 Piece Set Learn More
$199.99 Set
Camaro Rear Valance Panel Molding, 2010-2013 Part # 790263
Chromed Vinyl Easy Installation Does Not Include Exhaust Bezels Learn More

Was: $53.99 ea.

Now: $45.99 ea.
Camaro Wheel Well Molding Kit, 2010-2013 Part # 790262
Restoration Correct Wheel Well Moldings 4-Piece Wheel Molding Set Anodized Aluminum Construction Chrome Finish With Accurate Thickness And Mounting Holes Screws Not Included   Are the wheel well moldings on your 2010-2013 Camaro starting to show the wear and tear of everyday use? Let Rick's Camaros help you make your Camaro shine again. This 4-piece set of wheel well moldings will give your Camaro a brand new feel. These moldings are manufactured to original thickness, providing extra strength that will make them last longer. Also, the accurately placed mounting holes make for an easier and securer fit on your 2010, 2011, 2012 or 2013 Camaro LS, 1LT, 1SS, 2LT or 2SS . Trust Rick's for all of your wheel needs!  Learn More

Was: $134.99 Kit

Now: $109.99 Kit
Camaro Bezel, Bowtie, Rear, SS & RS, 2010-2013 Part # 790223
Made From Lightweight Ultra-Chrome Fits SS & RS Models Made In USA The new 2010 Chevrolet Camaro is one of the hottest cars on the road today. This kit contains a single piece, made of our Ultra-Chrome™ material. Each trim piece fits on the perimeter surface of the rear OEM logo on the 2010 Camaro SS & RS. Installation takes only minutes; simply clean the area where the adhesive will bond to the plastic lens. PLEASE AVOID WASHING THE CAR OR GETTING THE AREA WET FOR 24 HOURS. 3M VHB REQUIRES A MINIMUM OF 24 HOURS TO ACQUIRE 50% OF ITS ULTIMATE ADHESION. Note: "Ultra-Chrome™" is a custom made material. We purchase a very high quality chrome film from our German supplier to which we laminate .060 black ABS sheet and later 3M VHB adhesive. This triple layer material is designed especially for exterior auto trim and will not corrode, delaminate or discolor. All "Ultra-Chrome™" trim items are supplies with a clear protective film which should be peeled off the piece, preferably a day or so after installalation so as not to chance pulling the trim off of your car. Once complete, stand back and admire you handiwork. After peeling off the protective film you may notice a slight "nickel" or "black chrome" appearance, this is the UV protective layer which will fade when exposed to sun light. Learn More
$19.99 ea.
Camaro Gas Cap Cover, Super Sport, 2010-2013 Part # 790257
  100% Stainless Steel Brushed Finish Will Not Tarnish, Fade Or Rust Adds A Unique Look & Style To Your Camaro Easy "Peel & Stick" Installation Takes Just Minutes Fits All 2010-2012 Coupe & Convertible Camaros Made In USA Official GM Licensed Product Dress up your 2010, 2011, 2012 Camaro with our new GM Licensed Gas Cap / Fuel Door Cover Trim. Ricks Camaros offers this  easy to install cover and it adds a unique style to your 5th Generation 2010, 2011, 2012 Camaro.  Trust Ricks Camaros for all your parts needs. Learn More
$57.99 ea.
Camaro Exterior Badges, Brushed, Super Sport, 2010-2013 Part # 33-10955
Licensed GM Product 100% Stainless Steel Will Not Tarnish, Fade Or Rust Easy Installation Takes Just Minutes Fits Both Coupe And Convertible Models Sold As 2 Piece Kit Emblems Measure 8.00" Tall X 1.25" High Made In USA Add some zing and bling to your 2010, 2011, 2012 or 2013 Camaro with these Camaro Exterior Badges from Ricks Camaros. These are made from stainless steel, so they will not tarnish, fade or rust. Peel and stick installation, makes installation a snap, while adding flash to your 2010, 2011, 2012 or 2013 Camaro. Fits all coupe and convertible models. Add to the look of your Camaro before show car season or before that next weekend cruise. Trust Ricks Camaros for all your automotive needs. Learn More
$84.99 pr.

Was: $89.99 Kit

Now: $84.99 Kit
Camaro Headlight Styling Kit, 2010-2013 Part # 790252
Six Piece Kit Tinted Headlight Covers Give Your Car A Unique Appearance Learn More

Was: $149.99 ea.

Now: $129.99 ea.
Camaro Side Louver Inserts, Billet, Chrome, 2010-2014 Part # 790209
CNC Machined From 6061 Billet 1 Set Per Car 3M Adhesive-backed For Easy Installation 6 Piece Set Learn More
$199.99 Set
Camaro American Car Craft Side Marker Trim Set, Polished Stainless Steel, 2010-2013 Part # 33-11711
Side Marker Trim Set Manufactured By American Car Craft (ACC) Stainless Steel Construction Polished Finish Installs With 3M Double-Sided Tape 4-Piece Set Made In USA A Camaro polished stainless steel side marker trim set will add show-stopping style to your 2010, 2011, 2012, or 2013 Camaro's exterior. This custom piece is manufactured out of t304 stainless steel by American Car Craft. These laser cut trim pieces will perfectly accent the outer rim of your side marker lights. When you are looking to customize the look of your 2010, 2011, 2012, or 2013 Camaro, invest in an ACC polished SS side marker trim set today! Learn More
$64.99 Set
Camaro Quarter Panel Side Molding Set, Carbon Fiber Finish, 2010-2014 Part # 33-11860
1969-Style Louvers Are Made From Thermoformed TPO Plastic Carbon Fiber Finish Will Never Rust, Crack, Chip Or Peel Easily Installed Without Any Permanent Modifications To The Car Self-Adhesive No Drilling Required A Camaro quarter panel molding set with a carbon fiber finish is the perfect item to accent your high-performance 2010, 2011, 2012, 2013, or 2014 Camaro. The thermoplastic construction will not rust or crack and the carbon fiber finish will add a racers edge. No drilling is required for application of these louvers. They feature pre-installed 3M tape to streamline your 2010, 2011, 2012, 2013, or 2014 Camaro's renovation. When looking to upgrade your 5th Gen Camaro, look no further. Invest in RetroUSA carbon fiber quarter panel side moldings today. Available at Rick's Camaro. Learn More
$229.99 pr.
Camaro Quarter Panel Scoops, With Black Vinyl Inserts, 2010-2014 Part # 716152
Non-Functional Quarter Panel Scoops Includes Mounting Hardware No Drilling Required Paint-To-Match   Learn More

Was: $259.99 pr.

Now: $199.99 pr.
Power Portal Hood "Wing Vents" Chrome Upper Chrome Lower With Rectangular Chrome Mesh Part # 88-3224
Fits All Makes & Models (Universal Fit) Fits Fiberglass, Steel, Aluminum, Or Carbon Fiber Hoods Sets Car Apart From Others D.I.Y. Installation With Basic Hand Tools No Body Shop Visit Or Paint Work Needed Before Or After Installation Trim Is Chrome Plated Or Powder Coated To Last Besides looking awesome in chrome or black powder coat frames with contrasting or matching stainless steel and black mesh screens, these Wing Vents move a lot of hot air out of the engine bay. Wing Vents give a great stand-alone look. And they are a great compliment to the Power Portal Hood Window. NOTE: Some cars have extensive under hood ribbing for ?air slap? (Fiberglass and Carbon Fiber hoods tend to require a very little.) Check your car prior to purchasing our Wing Vents for fit and location. Learn More

Was: $309.99 pr.

Now: $189.99 pr.
Camaro Quarter Window Covers, Black, 2010-2013 Part # 790454
Race-Inspired Look! Easy Installation These Quarter Window Covers add a custom look to your Camaro. Made from Stamped aluminum with simulated rivets for a race-inspired look.3M adhesive included for a secure hold and simple installation. Learn More
$99.99 pr.
Camaro Polished Locking Fuel Door,DefenderWorx,2010-2014 Part # 33-11764
Billet Aluminum Construction Polished Finish Easy Installation Includes Two Keys Made In USA A Camaro polished locking fuel cap will add upgraded style and protection to your cherished 2010, 2011, 2012, 2013, or 2014 Camaro. Manufactured by DefenderWorx out of billet aluminum, this locking fuel cap provides durable protection from intruders and the elements. The beautiful polished finish will add a sleek look to your already sporty Camaro. When your are looking to supplement your 2010, 2011, 2012, 2013, or 2014 Camaro's exterior trim, invest in a DefenderWorx polished locking fuel cap. Learn More
$129.99 ea.
Camaro Fuel Door, Chrome, Camaro Logo, 2010-2014 Part # 790206
Officially Licensed Replacement Quick Easy Installation No Modifications to Body Required CNC Machined Billet Aluminum Polished Chrome with Block "CAMARO" Logo 2 Keys, Installation Instructions and Hardware Included The new 5th Generation Camaros are hot and nothing tops them off better than an accessory which makes them look even hottter! Eckler's Camaro brings you this polished chrome Camaro locking fuel door to take the place of that boring original fuel door everyone else with a Camaro has. Replace yours today with this quality fuel door from Eckler's Camaro and stand out in the crowd while protecting your investment.  Learn More
$199.99 ea.
Camaro Hood Pin Kit, Universal, Billet, Hotchkis, 1967-2014 Part # HD-58
Universal Fit Some Contoured Hoods May Not Be Able To Mount. Replace those old, rusty chrome hood pins on your Camaro with a pair of Ultra Trick, CNC Machined Aluminum Hood Pins from Hotchkis Sport Suspension. The Hard Annodized Finish gives a Hi Tech look to your car. The kit comes complete with Aluminum Pin, Stainless Hardware, Hood Pin Plates, and a Trick Aluminum Quick Release Pin. The Universal design makes it a great update for any Camaro. Learn More
$199.99 Kit
Camaro Chrome Side Vent Quarter Moldings, 2010-2014 Part # 33-11851
1969-Style Louvers Are Made From Thermoformed TPO Plastic Injection-Molded ABS Plastic With Chrome Finish Manufactured By RetroUSA Easily Installed Without Any Permanent Modifications To The Car Self-Adhesive No Drilling Required Will Never Rust, Crack, Chip Or Peel Made In The USA Give your 2010, 2011, 2012, or 2013 Camaro an aggressive look with RetroUSA's 69-styled paintable quarter moldings. Designed to flow into the factory louvers for enhanced depth. These quarter moldings are chrome-plated quarter molding Quarter moldings are made of grey injection-molded ABS plastic. Attaches to vehicle using 3M™ attachment tape. When in the market to add style to your 2010, 2011, 2012, or 2013 Camaro, invest in chrome quarter molding side vents. Learn More
$230.99 pr.
Camaro American Car Craft Side Marker Trim Set, Brushed Stainless Steel, 2010-2013 Part # 33-11710
Side Marker Trim Set Manufactured By American Car Craft (ACC) Stainless Steel Construction Brushed Finish Installs With 3M Double-Sided Tape 4-Piece Set Made In USA A Camaro brushed stainless steel side marker trim set will add show-stopping style to your 2010, 2011, 2012, or 2013 Camaro's exterior. This custom piece is manufactured out of t304 stainless steel by American Car Craft. These laser cut trim pieces will perfectly accent the outer rim of your side marker lights. When you are looking to customize the look of your 2010, 2011, 2012, or 2013 Camaro, invest in an ACC brushed SS side marker trim set today! Learn More
$64.99 Set
Items: 1 to 28 of 75 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. 3
  4. Next
Grid  |  List
4