Product Experts Available 1-800-359-7717

Filter Your Results

 

2012 CAMARO 1SS EXHAUST

Search Term: 'All Parts'
Category: 'Exhaust'
Vehicle: '2012 CHEVY CAMARO 1SS'
Items: 1 to 28 of 30 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. Next
Grid  |  List
Best Sellers
Insulating Exhaust Wrap Part # 88-0173-1
Reduces Under-Hood Temperatures up to 70% Increases Horsepower & Fuel Efficiency Withstands Heat up to 2000 Degrees  The original Exhaust Insulating Wrap was developed over 12 years ago by Thermo-Tec. Exhaust Insulating Wrap is an innovative way to create more horsepower and reduce under-hood temperatures. Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust scavenging is produced, along with lower intake temperatures. Exhaust Insulating Wrap withstands continuous heat up to 2000°F, and contains no asbestos. Thermo-Tec exhaust wrap will not over-insulate a system when properly installed due to a proprietary coating developed by Thermo-Tec - Thermal Conduction Technology (TCT) - that conducts heat across the wrap's surface. This coating controls heat build-up and dissipation. Just wrap it around your exhaust pipe and secure with lock ties P/N 88-0174-1. Protect wrap with Hi-Heat Coating spray P/N 88-0175-1. Wrap roll is 50' x 2" & 1/16" thick, which is enough to cover one header or exhaust pipe.   Learn More
$51.99 rl.
Exhaust Wrap, Stainless Steel Locking Ties Part # 88-0174-1
Cut-To-Length Narrow To Fit In Tight Locations Easy Slide-Through Fasteners To secure your Exhaust Wrap use, Stainless Steel Locking Ties. For primary tubes use 9-inch, for collectors use 18-inch. The ties can be used anywhere there is extreme heat (up to 2500 F). Learn More
$34.99 Kit
Thermo-Tec Insulating Header Manifold Blanket Part # 88-1350-3
Reduces Under-Hood Temperatures up to 70% Increases Horsepower & Fuel Efficiency Withstands Heat up to 2000 Degrees (2) 20" X 24" Blankets For V6 & V8 Applications The Header Manifold Blanket provides excellent heat-retention for exhaust headers and manifolds. This flexible heat shield simply clips into place on the upper portion of the header. The fabric side of the material should be facing the heat source, and the aluminized side facing away - offering protection from abrasion and harmful liquid spills. Learn More
$99.99 Set
Camaro Exhaust Cutout, 2-1/2" Part # 724606
Open Your Exhaust Up Before The Muffler 16ga. MIG Welded Steel With Three Bolt Flanges Includes Cap & Gasket Made In The USA Give your car the option to be loud when you want it to. Learn More
$79.99 ea.
Camaro Exhaust System, Borla S Type Cat-Back, 6.2L, 2010-2013 Part # 790402
Increased Horsepower & Fuel Economy Sport Type Mufflers Have A More Aggressive Sound Designed For Ground Effects 304 Stainless, Mandrel Bends Fits LS3 & L99 Engines, Automatic & Manual Transmissions Million-Mile Warranty Learn More

Was: $1,209.99 Kit

Now: $1,099.99 Kit
Camaro Exhaust System, Borla "Touring" Cat-Back With Tips, 6.2L, 2010-2013 Part # 790401
Increased Horsepower & Fuel Economy Touring Mufflers Have A Milder Sound 304 Stainless, Mandrel Bends Polished Stainless Tips Fits LS3 & L99 Engines, Automatic & Manual Transmissions Million-Mile Warranty      Warning: Will not work with ground effects. Learn More

Was: $1,327.99 Kit

Now: $1,199.99 Kit
Camaro Exhaust System, Borla S Type Cat-Back With Tips, 6.2L, 2010-2013 Part # 790400
Increased Horsepower & Fuel Economy Sport Type Mufflers Have A More Aggressive Sound 304 Stainless, Mandrel Bends Polished Stainless Tips Fits LS3 & L99 Engines, Automatic & Manual Transmissions Million-Mile Warranty     Warning: Will not work with ground effects. Learn More

Was: $1,294.99 Kit

Now: $1,199.99 Kit
Camaro Flowmaster Dual Exhaust System, American Thunder, 3"Cat-Back, Loud, V8, With Ground Effects, 2010-2013 Part # 724308
Mandrel Bent 16-Gauge 409 Stainless Steel Tubing Aggressive And Powerful Exterior Exhaust Tone Includes Hangers and Hardware For Easy Installation Connects Behind Factory Catalytic Converter Dyno-Tuned for Maximum Performance For Use On V8 Cars With GFX Package Learn More
$929.99 Kit
Camaro Flowmaster Dual Exhaust System, American Thunder, 3"Cat-Back, Loud, V8, W/O Ground Effects, 2010-2013 Part # 724307
Mandrel Bent 16-Gauge 409 Stainless Steel Tubing Aggressive And Powerful Exterior Exhaust Tone Includes Hangers and Hardware For Easy Installation Connects Behind Factory Catalytic Converter Dyno-Tuned for Maximum Performance For Use On V8 Cars Without GFX Package   Learn More
$936.99 Kit
Camaro Cat-Back Exhaust System, Stainless Steel, V8, 2010-2014 Part # 33-12934
Increased Horsepower And Torque Throughout RPM Improved Throttle Response Improved Fuel Economy Powerful Exhaust Note Tailpipe Diameter- 3" Tip Outlet Size- 4" Features Chambered Muffler's Works With Factory Mid Pipe Not For Convertible Car Models Upgrade the look and sound of your 2010, 2011, 2012, 2013, or 2014 Camaro's exhaust system with one of our tuned exhaust kits. They deliver a great performance sound and reduced restriction, which promotes increased power - especially when combined with other performance parts. Whether you're looking for a street legal sound or a completely off-roading system, Rick's Camaro has you covered. Our exhaust kits are designed for simple remove-and-replace installation with included instructions, for a quick and hassle-free changeover. The kit features a double walled stainless steel construction with included installation hardware. Trust Rick's Camaro for all your 5th Gen Camaro performance needs. Learn More
$799.99 Kit

New!

Camaro Exhaust Kit, Axle Back, Stainless Steel, V8, 2010-2014 Part # 33-12929
Increased Horsepower And Torque Throughout RPM Improved Throttle Response Improved Fuel Economy Powerful Exhaust Note Intermediate Pipe Diameter- 2 1/2" Tailpipe Diameter- 2 1/2" Tip Outlet Size- 4" The Exhaust Tip Has A Stainless Steel Finish Upgrade the look and sound of your 2010, 2011, 2012, 2013, or 2014 Camaro's exhaust system with one of our tuned exhaust kits. They deliver a great performance sound and reduced restriction, which promotes increased power - especially when combined with other performance parts. Whether you're looking for a street legal sound or a completely off-roading system, Rick's Camaro has you covered. Our exhaust kits are designed for simple remove-and-replace installation with included instructions, for a quick and hassle-free changeover. The kit features a double walled stainless steel construction with included single inlet/single outlet mufflers. Trust Rick's Camaro for all your 5th Gen V8 Camaro performance needs. Learn More
$599.99 Kit

New!

Camaro Exhaust System, Striker, Cat-Back, Sport, Stainless Steel, 2010-2013 Part # 790414
High Grade T304 Stainless Steel Mirror Polished Pipes, Mufflers TIG Welded For Superior Strength and Visual Appeal Angle-Cut, 4" Double Wall Design, Polished Stainless Steel Tips Mandrel Bent Piping Increased Horsepower And Enhanced Sound Straight-Through Race Mufflers Limited Lifetime Warranty Learn More
$749.99 Kit
Camaro Exhaust,Magnaflow,6.2L,Cat Back,3" Exit,2010-2013 Part # 724519
Dual Center Exit Custom Rear Fascia Required For Installation Lifetime Warranty 3" Tubing Dyno Tested And Proven To Make Power, Performance Gains In Horsepower And Torque, Great Sound -Has A Smooth; Deep Tone, Easy To Install, Mandrel-Bent. All Welded. Built To Last. Learn More
$1,299.99 Set
Camaro Exhaust System, Striker, Cat-Back, Stainless Steel, 2010-2013 Part # 790413
High Grade T304 Stainless Steel Mirror Polished Pipes, Mufflers TIG Welded For Superior Strength and Visual Appeal Angle-Cut, 4" Double Wall Design, Polished Stainless Steel Tips Mandrel Bent Piping Increased Horsepower And Enhanced Sound Limited Lifetime Warranty Learn More
$749.99 Kit
Camaro Exhaust,Magnaflow,6.2L,Cat Back,2.5" Exit,2010-2013 Part # 724518
Dual Center Exit Custom Rear Fascia Required For Installation 4 x 9 x 14in. Muffler 2.5" Tubing Lifetime Warranty Dyno Tested And Proven To Make Power, Performance Gains In Horsepower And Torque, Great Sound -Has A Smooth; Deep Tone, Easy To Install, Mandrel-Bent. All Welded. Built To Last. Learn More
$1,199.99 Set
Camaro Exhaust, GM Performance Parts, V8 Only, 2010-2013 Part # 724609
New Mufflers, Tips, Pipes & Hangers From the Axle-Back For V8 Only Upgrade the look and sound of your Camaro's exhaust system with one of our tuned, emissions-legal bolt-on exhuast kits. They deliver a great performance sound and reduced restriction, which promotes increased power - especially when combined with other performance parts. Whether you're looking for a street legal sound or a completely off-roading system, GM Performance Parts has you covered. Our exhaust kits are designed for simple remove-and-replace installation, for a quick and hassle-free changeover. Learn More
$1,119.99 Kit
Camaro Exhaust System, Borla, Rear Section,2010-2013 Part # 790420
Adds a Loud, Aggressive Sound Increased Horsepower & Fuel Economy 304 Stainless, Mandrel Bends 4.5" Exhaust Tips Million-Mile Warranty Used With Factory Ground Effects Package Used With 6.2L V-8 Learn More

Was: $789.99 Kit

Now: $699.99 Kit
Camaro Exhaust System, Borla, Rear Section, ATAK, 6.2L, 2010-2013 Part # 790411
Adds a Loud, Aggressive Sound Increased Horsepower & Fuel Economy 304 Stainless, Mandrel Bends 4.5" Exhaust Tips Million-Mile Warranty This Borla ATAK (Acoustically-Tuned Applied Kinetics) exhaust rear section is acoustically tuned to produce the highest decibel levels of any Borla street-legal product, while maintaining sound clarity. Learn More

Was: $879.99 Kit

Now: $799.99 Kit
2010-2013 Camaro BBK Headers, LS3/L99 1-3/4 Shorty Tuned Length, Stainless Steel Part # 791219
Uncoated Stainless Steel Finish Fully CNC Mandrel-Bent Tubing 3/8" Thick Laser Cut Flanges Robotic Welds For The Hot New 2010-2012 Camaro SS. These Headers Represent One of The Easiest Ways To Bolt On 12-16 Rear Wheel Horsepower In Your LS3 Equipped Camaro, Using Basic Tools While Meeting The Everyday Driving Duties of This New Breed of Muscle Car. Learn More
$469.99 pr.
2010-2013 Camaro BBK Headers, LS3/L99 1-3/4 Shorty Tuned Length, Silver Ceramic Coated Part # 791218
Ceramic Coated Finish Fully CNC Mandrel-Bent Tubing 3/8" Thick Laser Cut Flanges Robotic Welds For The Hot New 2010-2012 Camaro SS. These Headers Represent One of The Easiest Ways To Bolt On 12-16 Rear Wheel Horsepower In Your LS3 Equipped Camaro, Using Basic Tools While Meeting The Everyday Driving Duties of This New Breed of Muscle Car. Learn More
$419.99 pr.
2010-2013 Camaro BBK Headers, LS3/L99 1-3/4 Shorty Tuned Length, Chrome Finish Part # 791217
Chrome Finish Fully CNC Mandrel-Bent Tubing 3/8" Thick Laser Cut Flanges Robotic Welds For The Hot New 2010-2012 Camaro SS. These Headers Represent One of The Easiest Ways To Bolt On 12-16 Rear Wheel Horsepower In Your LS3 Equipped Camaro, Using Basic Tools While Meeting The Everyday Driving Duties of This New Breed of Muscle Car. Learn More
$319.99 pr.
Camaro Exhaust System, Borla, Cat Back, ZL1, ATAK, 2012-2013 Part # 33-10248
Improve Horsepower And Torque Aggresive Muscle Sound Stainless Steel Construction Bolt On Installation 4" Round Tips Fits All Transmissions Learn More

Was: $2,059.99 Set

Now: $1,799.99 Set
Camaro Flowmaster Dual Exhaust, American Thunder, 2.5" Axle-Back, Loud, V6, 2010-2013 Part # 724309
Mandrel Bent 16-Gauge 409 Stainless Steel Tubing Aggressive And Powerful Exterior Exhaust Tone Includes Hangers and Hardware For Easy Installation Connects Behind Rear Axle Requires Cutting But No Welding Dyno-Tuned for Maximum Performance Fits V6 LS And LT Learn More
$585.99 Kit
Camaro Flowmaster Dual Exhaust, American Thunder, 3" Hushpower Axle-Back, V8, With Ground Effects Package, 2010-2013 Part # 724311
Mandrel Bent 16-Gauge 409 Stainless Steel Tubing Aggressive And Powerful Exterior Exhaust Tone Includes Hangers and Hardware For Easy Installation Connects Behind Rear Axle Requires Cutting But No Welding Dyno-Tuned for Maximum Performance For Use On V8 Cars With GFX Package Learn More
$619.99 Kit
Camaro Flowmaster Dual Exhaust, American Thunder, 3" Hushpower Axle-Back, V8, 2010-2013 Part # 724310
Mandrel Bent 16-Gauge 409 Stainless Steel Tubing Aggressive And Powerful Exterior Exhaust Tone Includes Hangers and Hardware For Easy Installation Connects Behind Rear Axle Requires Cutting But No Welding Dyno-Tuned for Maximum Performance For Use On V8 Cars Without GFX Package Learn More
$619.99 Kit
Camaro Exhaust System, Borla, Cat Back, ZL1, Sport S Type, 2012-2013 Part # 33-10247
Improve Horsepower And Torque Pure Muscle Sound Stainless Steel Construction Bolt On Installation 4" Round Tips Fits All Transmissions Learn More

Was: $2,177.99 Set

Now: $1,899.99 Set
Camaro Exhaust Cutout, 2-1/4" Part # 724605
Open Your Exhaust Up Before The Muffler 16ga. MIG Welded Steel With Three Bolt Flanges Includes Cap & Gasket Made In The USA Give your car the option to be loud when you want it to. Learn More
$69.99 ea.
Thermo-Tec Insulating Wrap, Graphite Black Part # 88-1349-3
Reduces Under-Hood Temperatures up to 70% Increases Horsepower & Fuel Efficiency Withstands Heat up to 2000 Degrees The original Exhaust Insulating Wrap was developed over 12 years ago by Thermo-Tec. Exhaust Insulating Wrap is an innovative way to create more horsepower and reduce under-hood temperatures. Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust scavenging is produced, along with lower intake temperatures. Exhaust Insulating Wrap withstands continuous heat up to 2000F, and contains no asbestos. Thermo-Tec exhaust wrap will not over-insulate a system when properly installed due to a proprietary coating developed by Thermo-Tec - Thermal Conduction Technology (TCT) - that conducts heat across the wrap's surface. This coating controls heat build-up and dissipation. Just wrap it around your exhaust pipe and secure with lock ties P/N 88-0174-1. Protect wrap with Hi-Heat Coating spray P/N 88-0175-1. Wrap roll is 50' x 2" & 1/16" thick, which is enough to cover one header or exhaust pipe. Learn More
$59.99 rl.
Items: 1 to 28 of 30 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. Next
Grid  |  List
4