Product Experts Available 1-800-359-7717

Filter Your Results

 

2012 CAMARO 2LT EXHAUST

Search Term: 'All Parts'
Category: 'Exhaust'
Vehicle: '2012 CHEVY CAMARO 2LT'
Items: 1 to 28 of 51 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. Next
Grid  |  List
Best Sellers
Insulating Exhaust Wrap Part # 88-0173-1
Reduces Under-Hood Temperatures up to 70% Increases Horsepower & Fuel Efficiency Withstands Heat up to 2000 Degrees  The original Exhaust Insulating Wrap was developed over 12 years ago by Thermo-Tec. Exhaust Insulating Wrap is an innovative way to create more horsepower and reduce under-hood temperatures. Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust scavenging is produced, along with lower intake temperatures. Exhaust Insulating Wrap withstands continuous heat up to 2000°F, and contains no asbestos. Thermo-Tec exhaust wrap will not over-insulate a system when properly installed due to a proprietary coating developed by Thermo-Tec - Thermal Conduction Technology (TCT) - that conducts heat across the wrap's surface. This coating controls heat build-up and dissipation. Just wrap it around your exhaust pipe and secure with lock ties P/N 88-0174-1. Protect wrap with Hi-Heat Coating spray P/N 88-0175-1. Wrap roll is 50' x 2" & 1/16" thick, which is enough to cover one header or exhaust pipe.   Learn More
$51.99 rl.
Exhaust Wrap, Stainless Steel Locking Ties Part # 88-0174-1
Cut-To-Length Narrow To Fit In Tight Locations Easy Slide-Through Fasteners To secure your Exhaust Wrap use, Stainless Steel Locking Ties. For primary tubes use 9-inch, for collectors use 18-inch. The ties can be used anywhere there is extreme heat (up to 2500 F). Learn More
$34.99 Kit
Camaro Exhaust Trim Rings, Polished Stainless Steel, 2010-2013 Part # 33-10291
100% Stainless Steel High Polished, Mirror Finish Will Not Tarnish, Fade Or Rust Adds A Unique Look And Style To Your Car Easy "Peel And Stick" Installation Takes Just Minutes Fits All 2010-2013 Coupe And Convertible Camaros Available In Chopped Or Full Oval Sold As A (2) Piece Set Made In USA! Dress up your Camaro with our Polished Stainless Steel, Oval Exhaust Trim. These trim pieces are designed to fit on the rear valance around the stock exhaust tips and add a clean stylish look to your Camaro exterior. Learn More
$49.99 pr.
Camaro 305 Or 350 Header Gasket Kit, 1-5/8", 1967-2012 Part # 33-11135
Comes As A Pair Fits Only 305 Or 350 Engines Round Port Style For Use With BBK Headers Over time, the header gaskets on your 1967-2012 Camaro can get worn and not provide the proper seal that your exhaust headers need. Rick's Camaros wants to fix your problem. These reinforced header gaskets from BBK are made from the highest quality materials available. They feature a durable steel wire core to eliminate heat cracking and exhaust leaks, and provide a great seal. Measuring 1 5/8 inches, these header gaskets come as a pair for your Chevrolet Camaro's headers. They're designed for use with your BBK headers and only for 305 or 350 engines, so you can depend on these gaskets to go the extra mile. From racers, show cars, street rods, and daily drivers, you can trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2010, 2011, or 2012 F-Body Camaro! Learn More
$12.99 Kit
Camaro Exhaust System, Borla S Type Cat-Back, 6.2L, 2010-2013 Part # 790402
Increased Horsepower & Fuel Economy Sport Type Mufflers Have A More Aggressive Sound Designed For Ground Effects 304 Stainless, Mandrel Bends Fits LS3 & L99 Engines, Automatic & Manual Transmissions Million-Mile Warranty Learn More

Was: $1,209.99 Kit

Now: $1,099.99 Kit
Camaro Cat-Back Performance Exhaust, Stainless, V6, 2010-2013 Part # 33-11850
100% Stainless Steel Construction Dyno Tested To Improve Horsepower And Torque Dual Split Rear Exit Exhaust Tubing Size 2.5" Exhaust Tip Size 4" Mandral-Bent Pipe Deep Exhaust Tone Not For Convertible Made In USA   This Cat-Back system for your 2010, 2011, 2012, 2013 Camaro will provide the power increase and exhaust sound your looking for. Ricks Camaros offers this Cat-Back Performance Exhaust system as an easy bolt on replacement for your factory exhaust. This system has been tested and is proven to show horsepower and torque increases in a broad RPM range. This system also offers a deep exhaust tone, notifying everybody that your coming there way. Your 2010, 2011, 2012, 2013 Camaro will not only perform better, it will sound better, thanks to this easy to install, bolt on Cat-Back exhaust system. Trust Ricks Camaros for all your parts needs.  NOTE: Not For Convertible Learn More
$829.99 Set
Camaro Exhaust System, Borla "Touring" Cat-Back With Tips, 6.2L, 2010-2013 Part # 790401
Increased Horsepower & Fuel Economy Touring Mufflers Have A Milder Sound 304 Stainless, Mandrel Bends Polished Stainless Tips Fits LS3 & L99 Engines, Automatic & Manual Transmissions Million-Mile Warranty      Warning: Will not work with ground effects. Learn More

Was: $1,327.99 Kit

Now: $1,199.99 Kit
Camaro Exhaust System, Borla S Type Cat-Back With Tips, 6.2L, 2010-2013 Part # 790400
Increased Horsepower & Fuel Economy Sport Type Mufflers Have A More Aggressive Sound 304 Stainless, Mandrel Bends Polished Stainless Tips Fits LS3 & L99 Engines, Automatic & Manual Transmissions Million-Mile Warranty     Warning: Will not work with ground effects. Learn More

Was: $1,294.99 Kit

Now: $1,199.99 Kit
Camaro Flowmaster Dual Exhaust System, American Thunder, 3"Cat-Back, Loud, V8, With Ground Effects, 2010-2013 Part # 724308
Mandrel Bent 16-Gauge 409 Stainless Steel Tubing Aggressive And Powerful Exterior Exhaust Tone Includes Hangers and Hardware For Easy Installation Connects Behind Factory Catalytic Converter Dyno-Tuned for Maximum Performance For Use On V8 Cars With GFX Package Learn More
$929.99 Kit
Camaro Exhaust Kit, Axle Back, Stainless Steel, V6, 2010-2014 Part # 33-12928
Increased Horsepower And Torque Throughout RPM Improved Throttle Response Improved Fuel Economy Powerful Exhaust Note Intermediate Pipe Diameter- 2 1/4" Tailpipe Diameter- 2 1/4" Tip Outlet Size- 4" The Exhaust Tip Has A Stainless Steel Finish Upgrade the look and sound of your 2010, 2011, 2012, 2013, or 2014 Camaro's exhaust system with one of our tuned exhaust kits. They deliver a great performance sound and reduced restriction, which promotes increased power - especially when combined with other performance parts. Whether you're looking for a street legal sound or a completely off-roading system, Rick's Camaro has you covered. Our exhaust kits are designed for simple remove-and-replace installation with included instructions, for a quick and hassle-free changeover. The kit features a double walled stainless steel construction with included muffler. Trust Rick's Camaro for all your 5th Gen Camaro performance needs. Learn More
$599.99 Kit

New!

Camaro Flowmaster Dual Exhaust System, American Thunder, 3"Cat-Back, Loud, V8, W/O Ground Effects, 2010-2013 Part # 724307
Mandrel Bent 16-Gauge 409 Stainless Steel Tubing Aggressive And Powerful Exterior Exhaust Tone Includes Hangers and Hardware For Easy Installation Connects Behind Factory Catalytic Converter Dyno-Tuned for Maximum Performance For Use On V8 Cars Without GFX Package   Learn More
$936.99 Kit
Camaro Rear Section Exhaust System, Stainless Steel, V6, 2010-2013 Part # 33-11852
Stainless Steel Construction Single Split Rear Exit Pipe Diameter 2.25" Tip Diameter 3.5" Tip Desctiption Single Round Rolled Angle-Cut Lined Does Not Fit 2013 Quad-Tip RS Model Made In USA Your 2010, 2011, 2012, 2013 Camaro needs a strong shot of performance. Ricks Camaros offers this Borla Rear Section Exhaust System for your V6 Camaro. Made from high quality stainless steel 2.25" pipes, with 3.5" rolled angle-cut exhaust tips. This system increase exhaust tone and level well into V8 territory. For the best sound and performance for your 2010, 2011, 2012, 2013 Camaro, this Borla system is right for the task at hand. Trust Ricks Camaros for all your parts needs. Learn More
$799.99 Set
Camaro American Thunder Cat-Back Exhaust, V6, 2010-2013 Part # 33-13041
Stainless Steel Construction Fits Coupe And Convertible Models Includes Scavenger X-Pipe Inlet Diameter is 2.5 Inches, Outlet Diameter Is 3 Inches Features Dual Rear Exits Made In The USA This kit is for the person who is looking to install a complete Cat-back dual exhaust system with an aggressive tone on their 2010, 2011, 2012, or 2013 Camaro. With easy fit in mind, these systems are mandrel bent for maximum performance and include specially selected mufflers. American Thunder systems generally deliver an aggressive interior and exterior tone and are suited to the enthusiast who wants their performance to be heard. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation. Trust Rick's Camaro for all your performance needs. Learn More
$929.99 Kit

New!

Camaro Exhaust System, Striker, Cat-Back, Sport, Stainless Steel, 2010-2013 Part # 790414
High Grade T304 Stainless Steel Mirror Polished Pipes, Mufflers TIG Welded For Superior Strength and Visual Appeal Angle-Cut, 4" Double Wall Design, Polished Stainless Steel Tips Mandrel Bent Piping Increased Horsepower And Enhanced Sound Straight-Through Race Mufflers Limited Lifetime Warranty Learn More
$749.99 Kit
Camaro Exhaust,Magnaflow,6.2L,Cat Back,3" Exit,2010-2013 Part # 724519
Dual Center Exit Custom Rear Fascia Required For Installation Lifetime Warranty 3" Tubing Dyno Tested And Proven To Make Power, Performance Gains In Horsepower And Torque, Great Sound -Has A Smooth; Deep Tone, Easy To Install, Mandrel-Bent. All Welded. Built To Last. Learn More
$1,299.99 Set
Camaro Exhaust System, Striker, Cat-Back, Stainless Steel, 2010-2013 Part # 790413
High Grade T304 Stainless Steel Mirror Polished Pipes, Mufflers TIG Welded For Superior Strength and Visual Appeal Angle-Cut, 4" Double Wall Design, Polished Stainless Steel Tips Mandrel Bent Piping Increased Horsepower And Enhanced Sound Limited Lifetime Warranty Learn More
$749.99 Kit
Camaro Exhaust,Magnaflow,6.2L,Cat Back,2.5" Exit,2010-2013 Part # 724518
Dual Center Exit Custom Rear Fascia Required For Installation 4 x 9 x 14in. Muffler 2.5" Tubing Lifetime Warranty Dyno Tested And Proven To Make Power, Performance Gains In Horsepower And Torque, Great Sound -Has A Smooth; Deep Tone, Easy To Install, Mandrel-Bent. All Welded. Built To Last. Learn More
$1,199.99 Set
Camaro Exhasut Headers, Cat4ward, Stainless Steel, V6, 2010-2014 Part # 33-12930
Increased Horsepower And Torque Throughout RPM Improved Throttle Response Improved Fuel Economy Powerful Exhaust Note Primary Tube Diameter- 1 3/4" The Collector Attachment Is A Ball And Socket Flange Collector Diameter- 2.5IN Features Stainless Steel, Silver, Or Titanium Finishes Looking for an easy way to increase the horsepower and torque on your 2010, 2011, 2012, 2013, or 2014 Camaro V6? Look no further with Rick's Camaro Cat4ward Stainless Steel Headers! These headers are designed with 3/8 in. thick laser-cut flanges, mandrel-bent primary tubes, and feature JBA's patented Firecone merge collectors. This kit features the mounting hardware and instruction to properly install this on your V6 Camaro. Trust Rick's Camaro for all your performance needs. Learn More
$599.99 Kit

New!

Camaro Exhaust System, Borla, Rear Section,2010-2013 Part # 790420
Adds a Loud, Aggressive Sound Increased Horsepower & Fuel Economy 304 Stainless, Mandrel Bends 4.5" Exhaust Tips Million-Mile Warranty Used With Factory Ground Effects Package Used With 6.2L V-8 Learn More

Was: $789.99 Kit

Now: $699.99 Kit
Camaro Exhaust System, Borla, Rear Section, ATAK, 6.2L, 2010-2013 Part # 790411
Adds a Loud, Aggressive Sound Increased Horsepower & Fuel Economy 304 Stainless, Mandrel Bends 4.5" Exhaust Tips Million-Mile Warranty This Borla ATAK (Acoustically-Tuned Applied Kinetics) exhaust rear section is acoustically tuned to produce the highest decibel levels of any Borla street-legal product, while maintaining sound clarity. Learn More

Was: $879.99 Kit

Now: $799.99 Kit
Camaro Exhaust Control Kit, Mild2Wild, ZL1, 2012-2014 Part # 33-33058
FCC Approved Allows You To Control Exhaust To Unleash The Bi-Mode Exhaust 5 Minute Plug And Play 2 Settings Includes 2 Remotes Includes Complete Instructions The Mild2Wild Camaro ZL1 Wireless Exhaust Controller is the only FCC approved exhaust controller and works on all Camaro ZL1's developed with the help of GM engineers. Our Mild2Wild Remote Exhaust control allows you to be in total control of your exhaust system allowing you to unleash the bi-mode exhaust at any time, so you can have full sound & power, even at idle! You will think you installed a new exhaust system, deep rich sound at any RPM like it should be. A key feature is on the Camaro ZL1 you can even program you homelink universal garage opener to control the exhaust (so while driving opening and closing the exhaust is just a button press away) and still have the wireless remotes so you can show off the exhaust to your friends while standing in the back of the car with just a touch of a button on the mini wireless fobs, 5 minute plug and play. Operation: Once installed, you will have 2 settings, "ON" factory operation, exhaust will operate as it did prior to installing mild2wild.  "OFF"  The system will remain 100% open until you close it with a press of you homelink buttons. Inclues   2 remote controllers and  Instructions. Learn More
$99.99 Kit
Camaro Exhaust Kit, SS Axle Back, Stainless Steel, Sport, 2010-2013 Part # 33-10139
Full Stainless Steel Material Mirror Polished TIG Welded For Strength And Superior Visual Appearance 4" Double Wall Design Polished Tips With Angle Cut Mandrel Bent Piping Straight Through Racing Mufflers Increased HP Improved Sound Lifetime Warranty Want more sound from your Camaro, this axle back ss kit will give you just that! Made of Stainless steel and is mandrel bent for the smooth flowing exhaust and straight through race mufflers. Polished to a mirror finish with 4" double wall designed tips which are also polished and have a angle cut end. This system comes with a lifetime warranty to the original purchaser. Learn More
$299.99 Kit
Camaro Exhaust Kit, SS Axle Back, Stainless Steel, Cruze, 2010-2013 Part # 33-10137
Full Stainless Steel Material Mirror Polished TIG Welded For Strength And Superior Visual Appearance 4" Double Wall Design Polished Tips With Angle Cut Mandrel Bent Piping Straight Through Racing Mufflers Increased HP Improved Sound Lifetime Warranty Want more sound from your Camaro, this axle back ss kit will give you just that! Made of Stainless steel and is mandrel bent for the smooth flowing exhaust and straight through race mufflers. Polished to a mirror finish with 4" double wall designed tips which are also polished and have a angle cut end. This system comes with a lifetime warranty to the original purchaser. Learn More
$299.99 Kit
Camaro BBK Headers, Full Length, 1-3/4", LS3, 304 StainlessSteel, 2010-2013 Part # 33-30034
Full Length Headers 1-3/4" Primary Tubes 304 Stainless Steel Off-Road Use Only Learn More
$799.99 pr.
Camaro Scavenger Series Elite 409S Shorty Headers, V6, 2010-2012 Part # 33-13033
Features Stainless Steel Construction High Temperature Ceramic Coated Fabrication Dyno Tuned For Maximum Performance 3/8" Thick Laser Cut Flanges Made In The USA Rick's Camaro is proud to offer Flowmaster's Scavenger Series Elite shorty headers which are designed to replace the restrictive factory manifolds on your 2010, 2011, or 2012 Camaro LT or LS with a V6 engine. These high quality headers are manufactured from stainless steel and are ceramic coated for maximum durability. They feature 1-3/4 in. primary tubes, 3/8 in. thick laser cut flanges and factory collector connections, ensuring a direct-fit, leak free installation. Like all Flowmaster products, the benefits include improved throttle response, power and engine efficiency. The header collector attachment method features a V-Band Flange and the header style is a 3-1 One Piece. Designed for an easy fit, these headers include gaskets and necessary hardware for easy installation. Trust Rick's Camaro for all your performance upgrade needs. Note: Part requires cutting and welding to install new flange connections Learn More
$629.99 pr.

New!

Camaro LS3 BBK 1-3/4" Full-Length Chrome Headers W/High-Flow Cats, 2010-2012 Part # 33-11239
High-Performance Full-Length Headers W/High-Flow Cat 1-3/4" Mandrel-Bent Tubing Steel Construction With Chrome Finish 16-Guage Tubing 3/8" Flange Thickness CAD Designed 2-Bolt Flange Collector Attachment Includes: Gaskets, Hardware, & Installation Instructions Added HP And Performance Not Legal In California   Camaro LS3 full-length chrome exhaust headers are an easy way to increase the horsepower in your 2010, 2011, or 2012 Camaro. Whereas stock manifolds combine exhaust gases from each exhaust port on the cylinder head as soon as the gases leave the engine, headers provide a single exhaust tube for each port, resulting in an easier workload when your engine evacuates the gases. These exhaust headers are available in silver ceramic or 304 stainless. Each BBK full length long tube exhaust header system are CAD designed and are manufactured with 1-3/4" CNC mandrel bent tubing for unrestrictive airflow and a one piece laser cut flange 3/8" for added strength and durability. When you are in the market for performance at a value, invest in full-length long tube exhaust headers for your 2010, 2011, or 2012 LS3 Camaro. Available at Rick's Camaro today! Learn More
$749.99 ea.
Camaro Headers, Full Length, 1-3/4", LS3, Chrome, 2010-2013 Part # 33-30032
Full Length Headers 1-3/4" Primary Tubes Chrome Finish Off-Road Use Only Learn More
$499.99 pr.
Items: 1 to 28 of 51 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. Next
Grid  |  List
3