Product Experts Available 1-800-359-7717

2013 CAMARO 1LT CHEVY AIR INTAKE

Search Term: 'All Parts'
Category: 'Air Intake'
Vehicle: '2013 CHEVY CAMARO 1LT'

21 Item(s) Sort by: Show: per page Grid  |  List
Mass Air Flow Cleaner Spray Part # 88-9992-2
A Clean MAF Sensor Along With A New O2 Sensor Will Save Money At The Gas Pump 16 Ounce Aerosol Can Not Ship By Air The first product specifically developed to clean mass air flow sensors. Designed with advanced Cozol® technology. Increases horsepower & improves air/fuel ratio and MPG. Learn More
$8.99 ea.
Camaro AIRAID® Throttle Body Booster, 6.2L, 2010-2014 Part # 33-12092
Installs Using Common Tools Improves Throttle Body Air Flow Installation Instructions Included Made In The USA These throttle body boosters spin the incoming air as it passes through your throttle body and over the multitude of Econoaid blades. The turbulent air charge is carried through past intake valves for better atomization and more complete combustion! The Throttle Body Booster will give you a crisper throttle response, along with better Gas Mileage. A huge benefit of these spacers is the fuel savings. The Results of this fuel saving device will always vary depending on vehicle type, driving habits, age of the vehicle, and driving environment, among other factors. However, the average vehicle will see an extra 1-3 MPG and produce an extra 6-10 Ft.lbs of Torque, which can be felt from the increased low-end throttle response. These throttle body boosters will pay for themselves in no time at all, especially with current increasing gas prices. Click the E.O. number (D-520-4) to find out if your application is listed. If your application is not listed then your intake system is not legal for sale or use in California and some other states. Learn More
$27.99 Kit
Camaro Vararam Ram Air Intake System, V6, 2010-2013 Part # 33-10326
25-30 HP Gain! Fits V6 Easy Bolt On Installation No Tune Required The V-6 Camaro unit is unique in that it is designed around the V-6 engines cross ram intake manifold flow architecture and its need for maximum plenum volume. Features: 1. Reverse venturi 85MM MAF 2. Integrated rear air-horn to boost flow through the throttle body 3. Sound frequency cancelation, to remove that whomp, whomp sound from your intake. 4. Engineered / built in tune. (mild) 5. Quick and easy installation (we did it in under 9 min!) Guaranteed gains of 3 tenths or 3 mph through the 1/4 mile. 1/2 second gains on 0-60mph times. Learn More
$369.99 ea.
Camaro Spacer, Throttle Body, Jet Performance, 2010-2013 Part # 33-10281
Improves Air Flow Improves Mileage Gains In Mid Range And Top End CNC Machined Of Billet Aluminum Made In USA The Powr-Flo spacers bore is designed to increase the velocity of the air flow into the intake manifold .By delivering the air with more velocity it allows more air into the combustion chamber for a denser air charge. The design results in improved throttle response and impressive power gains in the mid range and top end. In addition, the increased air flow results in improved overall fuel efficiency. Simple, bolt-on installation with no other vehicle modifications required. Compatible with other aftermarket upgrades such as computer upgrades, cold air intakes, free flow exhaust systems, etc. Precision machined out of billet aluminum by JET's in house CNC machine shop. Learn More

Was: $119.99 ea.

Now: $99.99 ea.
Camaro Spectre ProFab Air Intake Kit,SS 6.2L,2010-2013 Part # 33-33048
Dyno Proven Gains Up To 21Hp Bolts Into Exsisting Mounting Holes And Brackets Highest Quality Materials Includes Blue HPR Filter Note: Not Legal For Sale Or Use In California These kits are designed to bolt right in existing holes and mounting brackets. It features high quality, top notch components throughout like polished aluminum tubes, anodized aluminum heat shields, EPDM gaskets and connectors and stainless steel t-bolt hose clamps. They are less restrictive and give access to more cold intake air. Dyno proven gains up to 21Hp. Learn More

Was: $169.99 Kit

Now: $149.99 Kit
Camaro Intake Kit, Black, 2010-2013 Part # 791013
Increases HP & torque by way of better breathing Deep throaty sound under hard acceleration yet silent at cruise This kit requires no custom tuning – works with factory ECM settings Easy Install with hand tools Washable and reusable cone style filter give it the hi-po look Requires less throttle at same speed so mileage increases based on driving habits Learn More

Was: $279.99 Kit

Now: $229.99 Kit
Camaro V6 Cold Air Blackout Induction System, 2012-2013 Part # 33-11055
Beautiful Black-Out Finish For 14-20 Horsepower (Depending On Performance Exhaust & Throttle Body) CAD Designed For Optimum Airflow & Maximum Performance Direct Bolt-On Installation Recommended: Adding A Throttle Body & Exhaust System Fits 2012-2013 5th Gen Camaro Models A brand new cold air intake induction system is just what you need to maximize the performance of your 2012 or 2013 Fifth Generation Camaro. Used to bring cool air to your Chevrolet's internal combustion engine when it gets warm, this cold air induction system from BBK Performance will optimize your Corvette's performance and fuel economy. Rick's Camaros is happy to offer this restoration correct V6 intake system, which utilizes high-flow washable cotton element filters and is CAD designed for optimum airflow and maximum performance. This beautiful blackout air intake engine system is designed to directly bolt-on in your F-Body in just minutes, and is dyno-tested with results of approximately 8-12 horsepower over a stock original. For the best performance in your 5th Gen Camaro, it is recommended to add a throttle body and exhaust system. From racers, show cars, street rods, and daily drivers, you can trust Rick's Camaros for all of your performance and replacement needs for your 2012 or 2013 Camaro! Learn More
$279.99 ea.
Camaro Spectre ProFab Air Intake Kit,V6 3.6L,2012-2013 Part # 33-33047
Dyno Proven Gains Up To 21Hp Bolts Into Exsisting Mounting Holes And Brackets Highest Quality Materials Includes White HPR Filter Note: Not Legal For Sale Or Use In California This kit was designed to bolt right in existing holes and mounting brackets. It features high quality, top notch components throughout like polished aluminum tubes, anodized aluminum heat shields, EPDM gaskets and connectors and stainless steel t-bolt hose clamps. They are less restrictive and give access to more cold intake air. Dyno proven gains up to 21Hp. Learn More

Was: $169.99 Kit

Now: $149.99 Kit
Comp Cams EZ EFI 2.0, Master Kit With In-Tank Fuel Pump Part # 88-3746-3
Converts Your Carburetor To Speed Density Fuel Injection In One Day Retains Your Air Cleaner, Distributor, Linkage, & Requires No Hood Modifications Cannot Be Used On Factory Computer Controlled Vehicles Eliminates Drivability, Cold Start, Sputtering, Coughing, & Stalling Issues Vastly Improves Drivability, Efficiency, & Performance Self Tunes With No Laptop Or Internet Connection Required 8-injector Throttle Body Supports Stock To 1200 HP Engines Holley Carb-Style Throttle Linkage & 4150 Square Bolt Pattern Walbro 450 LPH Pump Is Automatically Cooled By Fuel In The Tank Advanced Color Touch Screen Hand-Held/Sensor Dash W/Suction-Cup Mount - Same Mounting Points As Garmin GPS Exclusive Fuel Pulse Damper Creates Precise Fuel Control - Return Or Returnless-Style Fuel Systems Supported Works With Standard Distributors Or FAST™ Distributors For Plug And Play Electronic Timing Control High-Quality Wiring Harness With Mesh Loom & Wide-Band O2 Has The Fewest Connections On The Market ECU Includes On-Board LED Diagnostics & EZ-Test™ Indicator Lights Compatible With Standard, Ethanol Blend, & E85 Fuels Complete System Includes Everything You Need Made In The USA Lifetime Limited Manufacturer's Warranty Your classic vehicle is likely to be equipped with a carburetor. With millions on the road, carburetors "can" work great. If you drive your carbureted vehicle, you're familiar with the issues that come with it. Drivability is not great in cold weather or when driving in high elevations. They can cough, sputter, and even stall which, can be dangerous. And, they are prone to carboning up which leads to even more problems. Often, a re-tune can solve your problem for a little while but good luck finding someone who "knows" how to tune your carburetor right!  And, the tune can even change over time requiring another re-tune.  Step up to Comp Cams Fast EZ EFI® 2.0 and solve your carebureator woes once and for all.  The next generation of the revolutionary self tuning maintains ease-of-use that doesn't require a laptop or tuning experience. Simply hook up the system, answer the Setup Wizard questions on the hand-held, and EZ-EFI 2.0® tunes itself as you drive. Its eight-injector, die cast throttle body features OEM late model sensors for accuracy, durability, and availability at virtually any auto parts store won't leave you stranded.  The system supports up to 1200 horsepower (the highest on the market) so it grows with future modifications. It works with virtually any distributor and optional timing control is available.  A new secondary shaft throttle stop adjustment provides even more precise idle airflow adjustment and balance. An industry exclusive integrated fuel pulse damper creates ultra-precise fuel control. The EZ-EFI 2.0® also incorporates needle-bearing supported shafts instead of bushings and an integrated fuel rail design with crossover for tighter packaging. Setup includes the market's fewest connection wires, including a new high-quality wiring harness and a sleek mesh-type loom. The EZ-EFI 2.0® fetures the industry’s first color touchscreen on a hand held tuner. Self-powered through the ECU rather than requiring an outside power source, it shares the same mounting points as the Garmin Nuvi GPS, meaning there are nearly limitless mounting options (suction cup mount is included). Serving as the Setup Wizard initially, it then becomes an electronic gauge screen. The hand-held has various advanced features including screen hide sleep function, expanded diagnostics and data screens, plus intuitive navigation. Electronic fuel pressure measurement is standard on all kits, and all kits work with a wet nitrous system, providing built-in nitrous timing retard and special nitrous AFR targeting. EZ-Ignition™ features an EZ-Solution™ option, meaning that it is plug-and-play with FAST™ Distributors for electronic timing control or can be used with an EFI distributor of your choice and a FAST™ Crank Trigger. Or the system can be used to control fuel only and be used with a standard carb-type distributor (Ex. HEI) where timing is set manually. NOTES:  NOT compatible with resistor spark plugs or solid core spark plug wires.  Requires adapter or a new intake manifold if your existing manifold is not equipped with a square carburetor mounting flange.  The EZ-EFI® throttle body provides two 3/8 and one 1/8 manifold vacuum ports and one 1/8 ported vacuum port. (Ported vacuum ports do not provide a vacuum signal at idle.) If the carburetor being removed from your vehicle utilized more than this number of ports, you may require a barbed T fitting of the appropriate size to multiply the number of ports available on the EZ throttle body.  You will need a 2" hole saw (not included) if you elect to mount the wiring harness through the firewall and mount the ECM in your interior.  A 2" firewall grommet is included for this purpose.  The main battery wires, labeled “BATTERY POS” and “BATTERY NEG” MUST BE CONNECTED DIRECTLY to the battery. Connecting them anywhere else invites problems with electrical noise. These kinds of problems are difficult to diagnose. The wires may be extended if needed using automotive grade 10 gauge (or larger) wire.  CAUTION:  Installation of this product requires detailed knowledge of automotive systems and repair procedures. Installation of fuel system parts and any fuel tank modifications must be carried out by a qualified automotive technician. Installation of fuel system parts requires handling of gasoline. Ensure that work is performed in a well-ventilated area with an approved fire extinguisher nearby. Extinguish all open flames, prohibit smoking and eliminate all sources of ignition in the area of the vehicle before proceeding with the installation. When working with fuel systems, eye goggles and other safety apparel should be worn as needed to protect against debris and sprayed gasoline. The finished work must be checked carefully to ensure there are no fuel leaks. All fuel lines and connectors used in the installation of your fuel injection system should be rated for the higher pressure associated with fuel injection systems. It is not recommended that you use the factory hard lines as part of your installation unless the ends allow for the proper connection to high pressure systems. Be mindful as you route your fuel hoses that you keep them away from sources of heat and moving components on your vehicle. Learn More
$2,863.97 ea.
Camaro Spectre ProFab Air Intake Kit,V6 3.6L,2012-2013 Part # 33-33054
Dyno Proven Gains Up To 21Hp Bolts Into Exsisting Mounting Holes And Brackets Highest Quality Materials Includes Red HPR Filter Note: Not Legal For Sale Or Use In California This kit was designed to bolt right in existing holes and mounting brackets. It features high quality, top notch components throughout like polished aluminum tubes, anodized aluminum heat shields, EPDM gaskets and connectors and stainless steel t-bolt hose clamps. They are less restrictive and give access to more cold intake air. Dyno proven gains up to 21Hp. Learn More

Was: $169.99 Kit

Now: $149.99 Kit
Camaro ZL1 Carbon Fiber Engine Cover, 2012-2013 Part # 33-10335
Easy Installation Simply Replace Factory Cover By Transferring Existing Original Equipment Mounting Grommets Cover Is Clear Coated And Polished Dress up the new Camaro ZL1 with our carbon fiber engine cover and give the engine compartment a high tech look. Consistent with Nowicki Autosport/Design quality, our carbon fiber engine cover is crafted from state-of-the-art, hi-temp infused carbon fiber and built for exceptional strength, durability and outstanding fit and finish. Learn More
$1,499.99 ea.
Camaro Spectre ProFab Air Intake Kit,SS 6.2L,2010-2013 Part # 33-33049
Dyno Proven Gains Up To 21Hp Bolts Into Exsisting Mounting Holes And Brackets Highest Quality Materials Includes Black HPR Filter Note: Not Legal For Sale Or Use In California This kit is designed to bolt right in existing holes and mounting brackets. It features high quality, top notch components throughout like polished aluminum tubes, anodized aluminum heat shields, EPDM gaskets and connectors and stainless steel t-bolt hose clamps. They are less restrictive and give access to more cold intake air. Dyno proven gains up to 21Hp. Learn More

Was: $169.99 Kit

Now: $149.99 Kit
Camaro Airaid, Modular Intake Tube, 3.6L, V6, 2010-2014 Part # 33-12900
Great Performance Upgrade For Your Carmaro! Cross Linked Roto-Molded Intake Tubes Silicone Connectors And Hump Hoses Stainless Steel Hose Clamps Improves Airflow To The Engine 50 State Legal! C.A.R.B.  (The California Air Resources Board)  Approved! Made In USA 2010-2014 Fifth Generation Camaros are the hottest thing on the road, at the car shows and street scene. Ricks Camaros offers this awesome Airaid Modular Intake Tube, 3.6L, V6, for replacement on your Camaro. AIRAID Modular Intake Tubes (MIT) optimize airflow to the engine by replacing the factory intake tube. Factory tubes often have the accordion shaped walls, sound-canceling baffles, and undersized tube diameters, all which hurt airflow. AIRAID MIT kits help straighten and improve airflow to the engine while optimizing the location of the mass air sensor. The design provides better throttle response and additional horsepower along with better fuel economy. Modular Intake Tubes are constructed of cross-linked high-density polyethylene for strength and resistance to heat transfer. MIT tubes are direct replacements for factory intake tubes and accommodate all the factory sensors and fittings that attach to the factory tube. MIT tubes work with the factory throttle body and intake box. All necessary couplers and clamps are included, and installation takes only a few minutes. The new Camaro MIT kits have obtained CARB certification and are legal for sale and use in California as well as all other states. Get the most out of your 2010, 2011, 2012, 2013, 2014 Camaro. Trust Ricks Camaros for all your part needs. Learn More
$184.99 ea.
Camaro Vararam Power Wedge, LS3, 2010-2013 Part # 33-10323
8-12 HP Gain! Increases Air Flow Up To 10% Easy Bolt On Installation The Power wedge was born from the VRX Intake manifold program. Our research showed that most of the OEM manifolds had the intake manifold neck pointed upward at about 8 degrees. This is done in order to clear the water pumps and to soften throttle tip in response. In this position , at wide open throttle the blade extends into the manifold neck and plenum up to 1 full inch downward angle position. This blocks a portion of the lower section of the flow path. In short This means that when you are at WIDE open throttle you are only getting about 88-92% of the flow that is possible from whatever throttle body you are running. The Power wedge can be used on a stock car or a car making insane HP numbers, stroker motors and supercharged applications. They all work with the "VR Power Wedge!" The Torque Curve will amaze you! It will be from 2,000RPM all the way to red line! Learn More
$119.99 ea.
Camaro Intake Kit, Polished, 2010-2013 Part # 791014
Increases HP & torque by way of better breathing Deep throaty sound under hard acceleration yet silent at cruise This kit requires no custom tuning – works with factory ECM settings Easy Install with hand tools Washable and reusable cone style filter give it the hi-po look Requires less throttle at same speed so mileage increases based on driving habits Learn More

Was: $329.99 Kit

Now: $249.99 Kit
Atomic EFI 2, Fuel Injection Conversion, Master Kit With Inline Fuel Pump Part # 88-3729-3
Converts Your Carburetor To Speed Density Fuel Injection In One Day Retains Your Air Cleaner, Distributor, Linkage, & Requires No Hood Modifications Cannot Be Used On Factory Computer Controlled Vehicles Compatible With Up To 15% Ethanol Blend Fuels & E85 Fuels  Eliminates Drivability, Cold Start, Sputtering, Coughing, & Stalling Issues Vastly Improves Drivability, Efficiency, & Performance Self Tunes With No Laptop Or Internet Connection Required Complete System Includes Everything You Need Supports Return And Returnless Fuel Pump Systems Made In The USA 1-Year Limited Manufacturer's Warranty Your classic vehicle is likely to be equipped with a carburetor. With millions on the road, carburetors "can" work great. If you drive your carbureted vehicle, you're familiar with the issues that come with it. Drivability is not great in cold weather or when driving in high elevations. They can cough, sputter, and even stall which, can be dangerous. And, they are prone to carboning up which leads to even more problems. Often, a re-tune can solve your problem for a little while but good luck finding someone who "knows" how to tune your carburetor right!  And, the tune can even change over time requiring another re-tune.  The all-new MSD Atomic EFI master kit was designed to solve all of the problems. In a matter of hours, you can have modern fuel injection technology and solve your carburetor drivability and reliability issues once and for all. The system works with all 4150 style 4-barrel square bore intake manifolds. You'll be able to retain your throttle linkage and kick down linkage (if automatic equipped), air cleaner system, and your mechanical or electronic distributor.  Installation takes approximately 1-day with basic hand tools. Once installed, the initial tuning setup takes only 5 minutes...just answer six simple questions and you'll be up and running! It's compatible with today's ethanol fuel blends. You can even electronically control your timing curve (see TIMING CONTROL REQUIREMENTS below)/ MSD's Atomic EFI system includes everything you need including a cast aluminum 1000 cfm EFI throttle body with exclusive annular booster rings for perfect fuel atomization, 1.75" throttle inlets with roller bearings for smooth pedal transition, integrated leak proof fuel rails, an integrated ECU with sensors (self calibrating TPS, 2-Bar MAP, IAT, WB02, & Fuel Pressure), fuel based rev limiter, high quality pre-terminated wiring harness with only 8 connections, 4 precision 80lb./hour injectors with stainless ball & seat metering, power module (with wideband oxygen sensor), a hand held tuner with removable 4GB (gigabyte) micro SD card so you can record and store valuable engine data, a high volume inline fuel pump system with 15 ft. of 3/8" rubber fuel line and fuel filter, and detailed illustrated step-by-step instructions.  The MSD Atomic EFI system supports engines up to 525 horsepower (at the crank) and works on engines from 100 cubic inches to 800 cubic inches.  The MSD Atomic EFI system works with blow through and draw through forced induction (turbo or superchargers) producing up to 14 psi (blow through or draw through).  And, it works with Wet nitrous oxide systems.  The MSD Atomic EFI includes boost / nitrous timing retard which will retard the timing when under boost or your nitrous is active (this feature works when the MSD Atomic EFI is setup to control the timing).  The MSD Atomic EFI will transform your vehicle with night and day better drivability, crisp instant throttle response, significantly improved efficiency, and of course, more power. Trust Rick's Camaros for all your restoration, accessory, and performance parts needs. NOTES & WARNINGS: C.A.R.B. 50-STATE LEGAL:  The Atomic Throttle Body EFI system, PN 2900, has been granted Executive Order number D-722 from the California Air Resources Board. This E.O. number permits the installation of the Atomic TBI system on 1987 and older GM passenger cars and trucks with a V8 gasoline powered engine originally equipped with a carburetor. Other vehicles and manufacturers are pending approval. For emission compliant installation, all of the original control components must be retained including the catalytic converter, EST distributor, AIR pump, EGR, etc. An addendum outlining specific installation steps and settings for a CARB compliant installation are included separately with this kit.  COMPATIBILITY:Not compatible with engines over 800 cubic inches, distributors that produce hall-effect 5V signal, engines producing over 525HP at the crank, DRY nitrous oxide systems, forced induction systems producing more than 14 psi.  Injectors sizes are fixed and cannot be changed. TIMING CONTROL REQUIREMENTS:  MSD recommends that those who wish to use the Atomic’s timing control feature first get the engine to run without timing control. Splitting the timing control into a secondary process will add very little time to the total install, but could significantly help with trouble shooting, should it be needed.The following are a list of items that are required to use the timing features of the Atomic system: An MSD Ignition control (such as a 6A or 6AL Ignition) The distributor must be locked-out (instructions included with Atomic EFI) An adjustable distributor rotor to achieve accurate rotor phasing. The balancer must be degreed or use timing tape on your balancer. A timing light. EXHAUST AIR LEAKS:  The Atomic EFI is extremely sensitive to air leaks in the exhaust system. Any air leak between the engine and the WBO2 will cause the Atomic to have false readings, which can lead to poor engine performance, misfires, and an inability to properly auto-tune. Extended running of the Atomic EFI with an exhaust leak can result in detonation and severe engine damage. Improper installation of the oxygen sensor, and any damage that may result from such an installation, is not covered by the manufacturer’s warranty. WARNINGS: MSD’s included Push-Lock fittings are designed for use with the MSD fuel hose only. Do not use the MSD fuel hose with other fittings. Do not use MSD Push-Lock fittings with other fuel hose. Compatibility issues may cause fuel leaks. Learn More
$2,428.99 ea.
Camaro Cold Air Intake, V6, Blackwing, 2010-2013 Part # 791241
Includes Tube and Filter Each package includes a new high-flow, drop-in, reusable Blackwing air-filter and an OEM quality black-finished polypropylene high-flow air-intake tube with a raised SLP Blackwing logo providing up to a 10 horsepower gain. All necessary hardware and detailed installation instructions included. Learn More
$209.99 ea.
Camaro Spectre ProFab Air Intake Kit,SS 6.2L,2010-2013 Part # 33-33050
Dyno Proven Gains Up To 21Hp Bolts Into Exsisting Mounting Holes And Brackets Highest Quality Materials Includes White HPR Filter Note: Not Legal For Sale Or Use In California This kit is designed to bolt right in existing holes and mounting brackets. It features high quality, top notch components throughout like polished aluminum tubes, anodized aluminum heat shields, EPDM gaskets and connectors and stainless steel t-bolt hose clamps. They are less restrictive and give access to more cold intake air. Dyno proven gains up to 21Hp. Learn More

Was: $169.99 Kit

Now: $149.99 Kit
Camaro Spectre ProFab Air Intake Kit,V6 3.6L,2012-2013 Part # 33-33045
Dyno Proven Gains Up To 21Hp Bolts Into Existing Mounting Holes And Brackets Highest Quality Materials Includes Blue HPR Filter Note: Not Legal For Sale Or Use In California This kit was designed to bolt right in existing holes and mounting brackets. It features high quality, top notch components throughout like polished aluminum tubes, anodized aluminum heat shields, EPDM gaskets and connectors and stainless steel t-bolt hose clamps. They are less restrictive and give access to more cold intake air. Dyno proven gains up to 21Hp. Learn More

Was: $169.99 Kit

Now: $149.99 Kit
Camaro V6 Cold Air Chrome Induction System, 2012-2013 Part # 33-11054
Beautiful Chrome Finish For 14-20 Horsepower (Depending On Performance Exhaust & Throttle Body) CAD Designed For Optimum Airflow & Maximum Performance Direct Bolt-On Installation Recommended: Adding A Throttle Body & Exhaust System Fits 2012-2013 5th Gen Camaro Models A brand new cold air intake induction system is just what you need to maximize the performance of your 2012 or 2013 Fifth Generation Camaro. Used to bring cool air to your Chevrolet's internal combustion engine when it gets warm, this cold air induction system from BBK Performance will optimize your Corvette's performance and fuel economy. Rick's Camaros is happy to offer this restoration correct V6 intake system, which utilizes high-flow washable cotton element filters and is CAD designed for optimum airflow and maximum performance. This beautiful chrome air intake engine system is designed to directly bolt-on in your F-Body in just minutes, and is dyno-tested with results of approximately 8-12 horsepower over a stock original. For the best performance in your 5th Gen Camaro, it is recommended to add a throttle body and exhaust system. From racers, show cars, street rods, and daily drivers, you can trust Rick's Camaros for all of your performance and replacement parts needs for your 2012 or 2013 Camaro! Learn More
$279.99 ea.
Camaro Spectre ProFab Air Intake Kit,V6 3.6L,2012-2013 Part # 33-33046
Dyno Proven Gains Up To 21Hp Bolts Into Existing Mounting Holes And Brackets Highest Quality Materials Includes Black HPR Filter Note:  Not Legal For Sale Or Use In California This kit was designed to bolt right in existing holes and mounting brackets. It features high quality, top notch components throughout like polished aluminum tubes, anodized aluminum heat shields, EPDM gaskets and connectors and stainless steel t-bolt hose clamps. They are less restrictive and give access to more cold intake air. Dyno proven gains up to 21Hp. Learn More

Was: $169.99 Kit

Now: $149.99 Kit
21 Item(s) Sort by: Show: per page Grid  |  List
3