Skip to Main Content »

1-800-359-7717

Air Intake for 2013 Chevy Camaro 2lt

0  Items Total: $0.00 View Cart Checkout

You're currently on:

2013 CHEVY CAMARO 2LT

Search Term: 'All Parts'
Category: 'Air Intake'
Vehicle: '2013 CHEVY CAMARO 2LT'

18 Item(s) Show per page
View as: Grid  List  Sort by
Mass Air Flow Cleaner Spray Part # 88-9992-2
A Clean MAF Sensor Along With A New O2 Sensor Will Save Money At The Gas Pump 16 Ounce Aerosol Can Not Ship By Air The first product specifically developed to clean mass air flow sensors. Designed with advanced Cozol® technology. Increases horsepower & improves air/fuel ratio and MPG. Learn More
$8.99 ea.

Add to Wishlist

Camaro Spectre ProFab Air Intake Kit,SS 6.2L,2010-2013 Part # 33-33048
Dyno Proven Gains Up To 21Hp Bolts Into Exsisting Mounting Holes And Brackets Highest Quality Materials Includes Blue HPR Filter These kits are designed to bolt right in existing holes and mounting brackets. It features high quality, top notch components throughout like polished aluminum tubes, anodized aluminum heat shields, EPDM gaskets and connectors and stainless steel t-bolt hose clamps. They are less restrictive and give access to more cold intake air. Dyno proven gains up to 21Hp. Learn More

Was: $169.99 Kit

Now: $149.99 Kit

Add to Wishlist

Camaro Spectre ProFab Air Intake Kit,SS 6.2L,2010-2013 Part # 33-33049
Dyno Proven Gains Up To 21Hp Bolts Into Exsisting Mounting Holes And Brackets Highest Quality Materials Includes Black HPR Filter This kit is designed to bolt right in existing holes and mounting brackets. It features high quality, top notch components throughout like polished aluminum tubes, anodized aluminum heat shields, EPDM gaskets and connectors and stainless steel t-bolt hose clamps. They are less restrictive and give access to more cold intake air. Dyno proven gains up to 21Hp. Learn More

Was: $169.99 Kit

Now: $149.99 Kit

Add to Wishlist

Camaro Vararam Ram Air Intake System, V6, 2010-2013 Part # 33-10326
25-30 HP Gain! Fits V6 Easy Bolt On Installation No Tune Required The V-6 Camaro unit is unique in that it is designed around the V-6 engines cross ram intake manifold flow architecture and its need for maximum plenum volume. Features: 1. Reverse venturi 85MM MAF 2. Integrated rear air-horn to boost flow through the throttle body 3. Sound frequency cancelation, to remove that whomp, whomp sound from your intake. 4. Engineered / built in tune. (mild) 5. Quick and easy installation (we did it in under 9 min!) Guaranteed gains of 3 tenths or 3 mph through the 1/4 mile. 1/2 second gains on 0-60mph times. Learn More
$369.99 ea.

Add to Wishlist

Camaro Spectre ProFab Air Intake Kit,V6 3.6L,2012-2013 Part # 33-33054
Dyno Proven Gains Up To 21Hp Bolts Into Exsisting Mounting Holes And Brackets Highest Quality Materials Includes Red HPR Filter This kit was designed to bolt right in existing holes and mounting brackets. It features high quality, top notch components throughout like polished aluminum tubes, anodized aluminum heat shields, EPDM gaskets and connectors and stainless steel t-bolt hose clamps. They are less restrictive and give access to more cold intake air. Dyno proven gains up to 21Hp. Learn More

Was: $169.99 Kit

Now: $149.99 Kit

Add to Wishlist

Camaro AIRAID® Throttle Body Booster, 6.2L, 2010-2014 Part # 33-12092
Installs Using Common Tools Improves Throttle Body Air Flow Installation Instructions Included Made In The USA These throttle body boosters spin the incoming air as it passes through your throttle body and over the multitude of Econoaid blades. The turbulent air charge is carried through past intake valves for better atomization and more complete combustion! The Throttle Body Booster will give you a crisper throttle response, along with better Gas Mileage. A huge benefit of these spacers is the fuel savings. The Results of this fuel saving device will always vary depending on vehicle type, driving habits, age of the vehicle, and driving environment, among other factors. However, the average vehicle will see an extra 1-3 MPG and produce an extra 6-10 Ft.lbs of Torque, which can be felt from the increased low-end throttle response. These throttle body boosters will pay for themselves in no time at all, especially with current increasing gas prices. Click the E.O. number (D-520-4) to find out if your application is listed. If your application is not listed then your intake system is not legal for sale or use in California and some other states. Learn More
$27.99 Kit

Add to Wishlist

New!

Camaro Vararam Power Wedge, LS3, 2010-2013 Part # 33-10323
8-12 HP Gain! Increases Air Flow Up To 10% Easy Bolt On Installation The Power wedge was born from the VRX Intake manifold program. Our research showed that most of the OEM manifolds had the intake manifold neck pointed upward at about 8 degrees. This is done in order to clear the water pumps and to soften throttle tip in response. In this position , at wide open throttle the blade extends into the manifold neck and plenum up to 1 full inch downward angle position. This blocks a portion of the lower section of the flow path. In short This means that when you are at WIDE open throttle you are only getting about 88-92% of the flow that is possible from whatever throttle body you are running. The Power wedge can be used on a stock car or a car making insane HP numbers, stroker motors and supercharged applications. They all work with the "VR Power Wedge!" The Torque Curve will amaze you! It will be from 2,000RPM all the way to red line! Learn More
$119.99 ea.

Add to Wishlist

Camaro Spectre ProFab Air Intake Kit,V6 3.6L,2012-2013 Part # 33-33046
Dyno Proven Gains Up To 21Hp Bolts Into Exsisting Mounting Holes And Brackets Highest Quality Materials Includes Black HPR Filter This kit was designed to bolt right in existing holes and mounting brackets. It features high quality, top notch components throughout like polished aluminum tubes, anodized aluminum heat shields, EPDM gaskets and connectors and stainless steel t-bolt hose clamps. They are less restrictive and give access to more cold intake air. Dyno proven gains up to 21Hp. Learn More

Was: $169.99 Kit

Now: $149.99 Kit

Add to Wishlist

Camaro V6 Cold Air Blackout Induction System, 2012-2013 Part # 33-11055
Beautiful Black-Out Finish For 14-20 Horsepower (Depending On Performance Exhaust & Throttle Body) CAD Designed For Optimum Airflow & Maximum Performance Direct Bolt-On Installation Recommended: Adding A Throttle Body & Exhaust System Fits 2012-2013 5th Gen Camaro Models A brand new cold air intake induction system is just what you need to maximize the performance of your 2012 or 2013 Fifth Generation Camaro. Used to bring cool air to your Chevrolet's internal combustion engine when it gets warm, this cold air induction system from BBK Performance will optimize your Corvette's performance and fuel economy. Rick's Camaros is happy to offer this restoration correct V6 intake system, which utilizes high-flow washable cotton element filters and is CAD designed for optimum airflow and maximum performance. This beautiful blackout air intake engine system is designed to directly bolt-on in your F-Body in just minutes, and is dyno-tested with results of approximately 8-12 horsepower over a stock original. For the best performance in your 5th Gen Camaro, it is recommended to add a throttle body and exhaust system. From racers, show cars, street rods, and daily drivers, you can trust Rick's Camaros for all of your performance and replacement needs for your 2012 or 2013 Camaro! Learn More
$279.99 ea.

Add to Wishlist

Camaro Spectre ProFab Air Intake Kit,V6 3.6L,2012-2013 Part # 33-33047
Dyno Proven Gains Up To 21Hp Bolts Into Exsisting Mounting Holes And Brackets Highest Quality Materials Includes White HPR Filter This kit was designed to bolt right in existing holes and mounting brackets. It features high quality, top notch components throughout like polished aluminum tubes, anodized aluminum heat shields, EPDM gaskets and connectors and stainless steel t-bolt hose clamps. They are less restrictive and give access to more cold intake air. Dyno proven gains up to 21Hp. Learn More

Was: $169.99 Kit

Now: $149.99 Kit

Add to Wishlist

Camaro Spacer, Throttle Body, Jet Performance, 2010-2013 Part # 33-10281
Improves Air Flow Improves Mileage Gains In Mid Range And Top End CNC Machined Of Billet Aluminum Made In USA The Powr-Flo spacers bore is designed to increase the velocity of the air flow into the intake manifold .By delivering the air with more velocity it allows more air into the combustion chamber for a denser air charge. The design results in improved throttle response and impressive power gains in the mid range and top end. In addition, the increased air flow results in improved overall fuel efficiency. Simple, bolt-on installation with no other vehicle modifications required. Compatible with other aftermarket upgrades such as computer upgrades, cold air intakes, free flow exhaust systems, etc. Precision machined out of billet aluminum by JET's in house CNC machine shop. Learn More
$99.99 ea.

Add to Wishlist

Camaro ZL1 Carbon Fiber Engine Cover, 2012-2013 Part # 33-10335
Easy Installation Simply Replace Factory Cover By Transferring Existing Original Equipment Mounting Grommets Cover Is Clear Coated And Polished Dress up the new Camaro ZL1 with our carbon fiber engine cover and give the engine compartment a high tech look. Consistent with Nowicki Autosport/Design quality, our carbon fiber engine cover is crafted from state-of-the-art, hi-temp infused carbon fiber and built for exceptional strength, durability and outstanding fit and finish. Learn More
$1,499.99 ea.

Add to Wishlist

Camaro Intake Kit, Polished, 2010-2013 Part # 791014
Increases HP & torque by way of better breathing Deep throaty sound under hard acceleration yet silent at cruise This kit requires no custom tuning – works with factory ECM settings Easy Install with hand tools Washable and reusable cone style filter give it the hi-po look Requires less throttle at same speed so mileage increases based on driving habits Learn More

Was: $329.99 Kit

Now: $249.99 Kit

Add to Wishlist

Camaro Intake Kit, Black, 2010-2013 Part # 791013
Increases HP & torque by way of better breathing Deep throaty sound under hard acceleration yet silent at cruise This kit requires no custom tuning – works with factory ECM settings Easy Install with hand tools Washable and reusable cone style filter give it the hi-po look Requires less throttle at same speed so mileage increases based on driving habits Learn More

Was: $279.99 Kit

Now: $229.99 Kit

Add to Wishlist

Camaro Cold Air Intake, V6, Blackwing, 2010-2013 Part # 791241
Includes Tube and Filter Each package includes a new high-flow, drop-in, reusable Blackwing air-filter and an OEM quality black-finished polypropylene high-flow air-intake tube with a raised SLP Blackwing logo providing up to a 10 horsepower gain. All necessary hardware and detailed installation instructions included. Learn More
$209.99 ea.

Add to Wishlist

Camaro Spectre ProFab Air Intake Kit,SS 6.2L,2010-2013 Part # 33-33050
Dyno Proven Gains Up To 21Hp Bolts Into Exsisting Mounting Holes And Brackets Highest Quality Materials Includes White HPR Filter This kit is designed to bolt right in existing holes and mounting brackets. It features high quality, top notch components throughout like polished aluminum tubes, anodized aluminum heat shields, EPDM gaskets and connectors and stainless steel t-bolt hose clamps. They are less restrictive and give access to more cold intake air. Dyno proven gains up to 21Hp. Learn More

Was: $169.99 Kit

Now: $149.99 Kit

Add to Wishlist

Camaro Spectre ProFab Air Intake Kit,V6 3.6L,2012-2013 Part # 33-33045
Dyno Proven Gains Up To 21Hp Bolts Into Exsisting Mounting Holes And Brackets Highest Quality Materials Includes Blue HPR Filter This kit was designed to bolt right in existing holes and mounting brackets. It features high quality, top notch components throughout like polished aluminum tubes, anodized aluminum heat shields, EPDM gaskets and connectors and stainless steel t-bolt hose clamps. They are less restrictive and give access to more cold intake air. Dyno proven gains up to 21Hp. Learn More

Was: $169.99 Kit

Now: $149.99 Kit

Add to Wishlist

Camaro V6 Cold Air Chrome Induction System, 2012-2013 Part # 33-11054
Beautiful Chrome Finish For 14-20 Horsepower (Depending On Performance Exhaust & Throttle Body) CAD Designed For Optimum Airflow & Maximum Performance Direct Bolt-On Installation Recommended: Adding A Throttle Body & Exhaust System Fits 2012-2013 5th Gen Camaro Models A brand new cold air intake induction system is just what you need to maximize the performance of your 2012 or 2013 Fifth Generation Camaro. Used to bring cool air to your Chevrolet's internal combustion engine when it gets warm, this cold air induction system from BBK Performance will optimize your Corvette's performance and fuel economy. Rick's Camaros is happy to offer this restoration correct V6 intake system, which utilizes high-flow washable cotton element filters and is CAD designed for optimum airflow and maximum performance. This beautiful chrome air intake engine system is designed to directly bolt-on in your F-Body in just minutes, and is dyno-tested with results of approximately 8-12 horsepower over a stock original. For the best performance in your 5th Gen Camaro, it is recommended to add a throttle body and exhaust system. From racers, show cars, street rods, and daily drivers, you can trust Rick's Camaros for all of your performance and replacement parts needs for your 2012 or 2013 Camaro! Learn More
$279.99 ea.

Add to Wishlist

18 Item(s) Show per page
View as: Grid  List  Sort by
1