Skip to Main Content »

1-800-359-7717

Camaro Performance

0  Items Total: $0.00 View Cart Checkout

Filter Your Results

Currently Shopping by

  1. Remove This Item CATEGORY: Performance
Categories
  1. Brakes (1)
  2. Engine (6)
  3. Fuel System (4)
  4. Suspension (3)
Price
  1. $50.00 to $99.99 (3)
  2. $125.00 to $399.99 (3)
  3. $400.00 to $599.99 (3)
  4. $800.00 to $5999.99 (3)
  5. $6000.00 to $7999.99 (2)

Facebook and Twitter

Follow Rick's Camaros Facebook  Follow Eckler's on Twitter  FollowRick's on Facebook and Twitter

 

You're currently on:

Edelbrock Parts and Accessories

EDELBROCK TODAY

Edelbrock Corporation has seven locations: four in Torrance and three in San Jacinto, California, totaling over 500,000 square feet. Torrance Headquarters include: R&D; manufacturing; state-of-the-art testing facilities, advertising and tech support.

Less than a mile away are the Russell Plumbing, as well as our Distribution Center and Vic’s Garage. This location also houses the Company’s collection of street rods and classic cars, as well as the company archives containing our extensive collection of historic photos and memorabilia. Our Aluminum Foundries are located close by in San Jacinto. In 2008 we added a new Permanent Mold and Heat Treat facility next to our existing sand cast foundry, which has been called “the most state-of-the-art sand cast foundry west of the Mississippi.” This investment in American facilities is part of our commitment to “Made in USA” products and performance.

INTO THE FUTURE... “Proven Performance” is the philosophy that began with Vic Sr. in 1938 and it continues today with the same high standards of performance and quality. Vic Sr. would be proud of what has grown out of his small garage in Los Angeles, California.

On tap for 2012 is the expansion of the E-Force Supercharger line. Edelbrock is continuing the success of the E-Force systems with new applications for the 2003-11 GM Trucks, 2007-Later Ford Expedition and Lincoln Navigator along with a universal LS3 system for use in street rods and muscle cars. These revolutionary designs deliver instant, reliable and safe horsepower with low boost for minimum stress on the engine. And they fit under the stock hood!

We are also excited to announce the development of our new E-Street universal electronic fuel injection system. The E-Street EFI system is intended as an affordable, easy to use, fuel injection solution that can be installed on any V8 engine, originally equipped with a carburetor. It includes a pre-assembled throttle body, engine control unit (ECU), 7" touch screen tablet, high quality wiring harness, wide band oxygen sensor and instructions for a trouble free installation. This system will make upgrading from a carbureted setup to modern electronic fuel injection simple.

14 Item(s) Show per page
View as: Grid  List  Sort by
Edelbrock 1970-1981 Camaro Performance Carburetor, 600 CFM For Cars With EGR Part # 718781
Stock Replacement For Cars With Exhaust Gas Recirculation (EGR) 4 Barrel, Single Fuel Inlet Square Bore Carburetor Flange Silver Finish Great Combo With "Performer" Intake   A new performance carburetor is just what your 1970-1981 Camaro needs for an improved internal combustion engine. Our 600 CFM performance carburetor, manufactured by Edelbrock, outperforms the stock Quadra-Jet and provides better mileage. Also, it accepts the Camaro stock throttle linkage and transmission kick down mechanism. In addition, it has a universal 12-volt electric choke, vacuum/weight operated secondaries, vacuum advance connection, and PCV fitting. This carburetor has a single fuel inlet, which requires a new fuel feed line, but the fuel filter and carburetor gasket are included. It is to be used on Camaros with exhaust gas recirculation (EGR) and small block engine applications. Use on an Edelbrock manifold requires the purchase of the carburetor base plate P/N 718405. Trust Rick's Camaros for all of your restoration and replacement needs for your 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, or 1981 Camaro! Learn More
$409.99 ea.

Add to Wishlist

Russell 2010-2011 Camaro Super Sport Brake Hoses, Stainless Steel Only Part # 720519
Braided Stainless Steel Replacement Correct Zinc Plated Fittings For SS Models With Brembo Calipers Only Sold As A Set Of 4 Exceeds FMVSS-571.106 Standards Manufactured By Russell Street Legal For SS Models With Brembo Calipers Only   When it comes to your 2010 or 2011 Camaro, stopping power is paramount. In order for brake fluid to reach the wheel cylinder, causing the cylinder to press against the shoes and the shoes against the drum, it is imperative to have a quality set of brake hoses. The same goes for disc brakes. Quality brake hoses are neccessary to activate the calipers, pads, and discs. Despite their inherent resistance, brake hoses can often wear down resulting in dangerous leaks. If your hose shows signs of disrepair, do not wait another minute to replace them. For an all-around more secure ride, invest in a set of braided stainless steel brake hoses for your F-Body. Trust Rick's Camaros for all of your restoration and replacement needs for your 2010 or 2011 Camaro!  Learn More
$133.99 Kit

Add to Wishlist

Edelbrock 1970-1981 Camaro EGR Valve Adapter Part # 718782
Clears Carburetor Natural Cast Aluminum Finish Includes Necessary Gaskets & Bolts Use With P/N 718781 Carburetor The EGR valve adapter on your 1970-1981 Camaro controls a small passageway between the intake and exhaust manifolds. To start, EGR stands for exhaust gas recirculation, and is a technique used to recirculate your engine's exhaust gas back to the engine cylinders. Rick's Camaros is happy to partner with Edelbrock to bring you a new EGR valve adapter, to make installing your new intake and carburetor much easier. With this adapter, the existing EGR valve on your F-Body is repositioned to allow clearance for your carburetor. Made from cast aluminum and coming in a set complete with mounting gaskets and bolts, you will have everything you need for a great looking installation. Trust Rick's Camaros for all of your restoration and replacement needs for your 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, or 1981 Camaro! Learn More
$64.99 ea.

Add to Wishlist

Edelbrock 2010-2013 Camaro Trailing Arm Kit Part # 790114
Reduces Wheel Hop & Squat Under Hard Launches Adjustable Rod Ends Allow For Custom Suspension Tuning Ideal For Larger Wheels Lighter & Stronger Than Original Arms Improves Handling & Traction Direct Bolt-on Installation A trailing arm kit for your 2010, 2011, 2012, or 2013 Camaro is exactly what you need to reduce the wheel hop and increase your car's traction. Manufactured from Edelbrock, this black coated kit has adjustable rod ends for custom suspension tuning, includes lighter and stronger arms than your originals, and will directly bolt-on when installing. This kit is ideal for larger wheels, and will immediately improve the handling and traction on your F-Body Camaro. Don't wait to improve your ride's performance. Trust Rick's Camaros for all of your restoration and replacement needs for your 2010, 2011, 2012, or 2013 Camaro! Learn More
$229.99 Kit

Add to Wishlist

Edelbrock 2010-2013 Camaro Toe Link Kit Part # 790113
Reduces Wheel Hop & Squat Under Hard Launches Reduces Premature Tire Wear Polyurethane And Adjustable Rod Ends Keep Toe Constant Under Hard Cornering Fully Adjustable Steel Control Arm Red Anodized Finish Improves Handling & Traction Direct Bolt-on Installation   Adjustable rear toe links help keep the tires on your 2010, 2011, 2012, or 2013 Camaro planted firmly to the ground and pointed in the right direction to improve handling performance. These Edelbrock toe links are constructed with aluminum adjustment sleeves, 5/8" heavy duty Heim joint rod ends and polyurethane bushings for strength and stability. They replace OEM arms produced from stamped steel that can deform under hard cornering loads and which use an eccentric for rear toe adjustment that is susceptible to slippage. The heim joint on the toe links allow the suspension to operate smoothly throughout its full range of motion. The kit includes lockouts for the eccentrics to stop any movement of the rear toe adjustment and relocates the adjustment point onto the toe link for a finer and easier adjustment. While having easy bolt-on installation, this kit promises to more precisely hold your F-Body's tires where they should be. Trust Rick's Camaros for all of your restoration and replacement needs for your 2010, 2011, 2012, or 2013 Camaro! Learn More
$349.99 Kit

Add to Wishlist

Edelbrock 2010-2014 Camaro E-Force Street Supercharger Kit, With Manual Transmission Part # 719647
Supercharger Manifold Assembly (Featuring Eaton TVS Rotors) Cast Aluminum Alternator/Idler Bracket Heavy Duty Automatic Belt Tensioner Dual, High Capacity, Bar & Plate Intercoolers Full Face Low Temp. Heat Exchanger for Intercooler System Extruded Aluminum Fuel Rails with -6 AN Lines Electric Intercooler Water Pump Intercooler Recovery Tank Steel Idler Pulleys With Heavy Duty High Speed Bearings For Manual Transmission The Edelbrock E-Force Supercharger can take your already high performance street car to the next level. This supercharger kit is exclusively tailored for the 2010, 2011, 2012, 2013 or 2014 Camaro SS and will allow you to boost your performance to a whole new level. The unique features of this kit are the 12" long intake runners that allow for maximum low end torque and the optional 5 year 100,000 mile warranty. Its compact design fits under the stock hood and complements the clean look of the engine compartment. The street kits include the components from the competition kits, plus other items needed for daily driver use. Trust Rick's Camaros for all of your restoration and replacement needs for your 2010, 2011, 2012, 2013, or 2014 F-Body Camaro!  Learn More
$7,199.99 Kit

Add to Wishlist

Edelbrock 2010-2014 E-Force Camaro Street Supercharger Kit, For Automatic Transmission Part # 719646
Supercharger Manifold Assembly (Featuring Eaton TVS Rotors) Cast Aluminum Alternator/Idler Bracket Heavy Duty Automatic Belt Tensioner Dual, High Capacity, Bar & Plate Intercoolers Full Face Low Temp. Heat Exchanger for Intercooler System Extruded Aluminum Fuel Rails with -6 AN Lines Electric Intercooler Water Pump Intercooler Recovery Tank Steel Idler Pulleys With Heavy Duty High Speed Bearings For Automatic Transmission The Edelbrock E-Force Supercharger can take your already high performance street car to the next level. This supercharger kit is exclusively tailored for the 2010, 2011, 2012, 2013, or 2014 Camaro SS and will allow you to boost your performance to a whole new level. The unique features of this kit are the 12" long intake runners that allow for maximum low end torque and the optional 5 year 100,000 mile warranty. Its compact design fits under the stock hood and complements the clean look of the engine compartment. The Street kits include the components from the competition kits, plus other items needed for daily driver use. Trust Rick's Camaros for all of your restoration and replacement needs for your 2010, 2011, 2012, 2013, or 2014 F-Body Camaro!  Learn More
$7,199.99 Kit

Add to Wishlist

Edelbrock 2010-2014 Camaro E-Force Competition Supercharger Kit, For Automatic Transmission Part # 719645
Supercharger Manifold Assembly (Featuring Eaton TVS Rotors) Cast Aluminum Alternator/Idler Bracket Heavy Duty Automatic Belt Tensioner Dual, High Capacity, Bar & Plate Intercoolers Full Face Low Temp. Heat Exchanger for Intercooler System Extruded Aluminum Fuel Rails with -6 AN Lines Electric Intercooler Water Pump Intercooler Recovery Tank Steel Idler Pulleys With Heavy Duty High Speed Bearings For Automatic Transmission The Edelbrock Competition Supercharger can take your already high performance street car to the next level. This supercharger kit is exclusively tailored for the 2010, 2011, 2012, 2013, or 2014 Camaro SS and will allow you to boost your performance to a whole new level. The unique features of this kit are the 12" long intake runners that allow for maximum low end torque and the optional 5 year 100,000 mile warranty. Its compact design fits under the stock hood and complements the clean look of the engine compartment. This E-Force Competition Supercharger kit is based off of our street supercharger kit P/N 719646, but is paired down to the essential components that a racer needs, without the extras that experienced racers prefer to customize for their own competitive advantage. For competition racing use only. Trust Rick's Camaros for all of your restoration and replacement needs for your 2010, 2011, 2012, 2013, or 2014 racing Camaro!  Learn More
$5,999.99 Kit

Add to Wishlist

Edelbrock 2010-2014 Camaro E-Force Competition Supercharger Kit, Manual Transmission Part # 719644
Supercharger Manifold Assembly (Featuring Eaton TVS Rotors) Cast Aluminum Alternator/Idler Bracket Heavy Duty Automatic Belt Tensioner Dual, High Capacity, Bar & Plate Intercoolers Full Face Low Temp. Heat Exchanger for Intercooler System Extruded Aluminum Fuel Rails with -6 AN Lines Electric Intercooler Water Pump Intercooler Recovery Tank Steel Idler Pulleys With Heavy Duty High Speed Bearings For Manual Transmission The Edelbrock Competition Supercharger can take your already high performance street car to the next level. This supercharger kit is exclusively tailored for the 2010, 2011, 2012, 2013, or 2014 Camaro SS and will allow you to boost your performance to a whole new level. The unique features of this kit are the 12" long intake runners that allow for maximum low end torque and the optional 5 year 100,000 mile warranty. Its compact design fits under the stock hood and complements the clean look of the engine compartment. This E-Force Competition Supercharger kit is based off of our street supercharger kit P/N 719647, but is paired down to the essential components that a racer needs, without the extras that experienced racers prefer to customize for their own competitive advantage. For competition racing use only. Trust Rick's Camaros for all of your restoration and replacement needs for your 2010, 2011, 2012, 2013, or 2014 racing Camaro!  Learn More
$5,999.99 Kit

Add to Wishlist

Edelbrock 1970-2002 Camaro Fuel Pump Relay Kit, Universal Part # 729375
Necessary When Installing Electric Fuel Pumps Ensures Proper Wiring To Reduce Fuel Pump Damage 12 V, 30 Amps Single Pole, Spade Terminal Wiring Harness Included Use Kit With Electric Fuel Pump P/N 729374   Edelbrock electric fuel pump relay kits will help to reduce the risk of damaging your 1970-2002 Camaro's fuel pump. The 12 volts relay kits will provide consistent fuel pressure to the regulator or carburetor to eliminate possible engine damage. These Edelbrock fuel pump relay kits also include a wiring harness and single-blade connection for an easy hookup. Don't wait to reduce fuel pump damage on your F-Body. Trust Rick's Camaros for all of your restoration and replacement needs for your 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, or 2002 Camaro! Learn More
$59.99 Kit

Add to Wishlist

Edelbrock 1967-1992 Camaro LS Intake Manifold Kit Part # 790419
Affordable & Trouble Free Solution For Running A Late Model Motor Made In USA Solid State Electronics 1,500-6,500 Operating RPM Range Dual Plane Intake Style Natural Aluminum Intake Finish Dual Pattern Carburetor Flange (Square Or Spread Bore) Uses Factory GM Sensors & Coils (Not Included) Works With 24x Crank Sensors Only (Pre 2006 GM V8) Rick's Camaros offers this LS intake manifold kit, manfactured by Edelbrock, for your 1967-1992 Camaro. This kit, developed by MSD & Edelbrock, will let you use any Vortec 4.8, 5.3, 6.0, or LS1/LS6 (1997-2004). The smaller 4.8 & 5.3 are plentiful and very affordable in salvage yards due to the complexity of the computer and wiring. All you need with this kit is a carburetor, and the factory sensors and coil packs from the donor vehicle. The Edelbrock/MSD ignition controller plugs into the factory sensors and coil packs and handles all computer tasks, while the carburetor does the fuel. The controller comes with 6 pre-set spark curves which will let you run whatever octane fuel you desire in your F-Body. Brackets are included to mount TH350 & 700R4 Detent/Kickdown Cables. Make your LS1 engine an easy retro-fit into any muscle car, street rod or marine application with American-made Edelbrock Performer RPM LS1 intake manifold kits. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 197, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, or 1992 Camaro! Learn More
$865.99 ea.

Add to Wishlist

Edelbrock 1993-1997 Camaro Performer RPM Air-Gap LT4 Intake Manifold Part # 718907
Performance Intake Manifold Excellent Throttle Repsonse Throughout RPM Range Improved Fuel Economy With Incredible Horsepower Complete Intake Section Included 1,500-6,500 Operating RPM Range Natural Aluminum Finish Red Powdercoated Multi-Port Injection Stock/OEM Standard Engine Block   Rick's Camaros offers this LT4 intake manifold for your 1993, 1994, 1995, 1996, or 1997 Camaro. It is a proven fact that cooler air makes more power. Edelbrock Performer RPM Air-Gap Manifolds have a raised plenum which separates the intake air from the hot engine coolant passages in the base. Cooler intake air can hold more oxygen, which improves the Air/Fuel ratio. Another advantage is the ability to run slightly more ignition timing without fear of detonation. More timing means more power for your F-Body Camaro. The raised design also puts the intake runners at a better angle to the fuel injectors, improving fuel atomization, which in turn increases efficiency and fuel economy in your street car. These manifolds accept all factory emissions equipment, brackets, and vacuum hoses. The LT1 manifold P/N 718906 is recommended for lightly modified street/strip applications, while the LT4, P/N 718907 is more suited to cars with aggressive head and cam combinations. Trust Rick's Camaros for all of your restoration and replacement needs for your 1993, 1994, 1995, 1996, or 1997 Camaro!  Learn More
$542.99 ea.

Add to Wishlist

Edelbrock 1993-1997 Camaro Performer RPM Air-Gap LT1 Intake Manifold Part # 718906
Performance Intake Manifold Excellent Throttle Repsonse Throughout RPM Range (1,500-6,500 Operating Range)  Improved Fuel Economy With Incredible Horsepower Stock Engine Block Style Exhaust Gas Recirculation Technique Included Complete Intake Section Included Natural Aluminum Finish Multi-Port Injection Style A new performer intake manifold could be just the thing you need for your 1993, 1994, 1995, 1996, or 1997 Camaro. It is a proven fact that cooler air makes more power. Edelbrock Performer RPM Air-Gap Manifolds have a raised plenum which separates the intake air from the hot engine coolant passages in the base. Rick's Camaros is proud to work with Edelbrock to bring you a revolution in your F-Body's air intake. Cooler intake air can hold more oxygen, which improves the Air/Fuel ratio. Another advantage is the ability to run slightly more ignition timing without fear of detonation. More timing means more power. The raised design also puts the intake runners at a better angle to the fuel injectors, improving fuel atomization, which in turn increases efficiency and fuel economy. These manifolds accept all factory emissions equipment, brackets, and vacuum hoses. The LT1 manifold P/N 718906 is recommended for lightly modified street/strip applications, while the LT4, P/N 718907 is more suited to cars with aggressive head and cam combinations. Trust Rick's Camaros for all of your restoration and replacement needs for your 1993, 1994, 1995, 1996, or 1997 Camaro!  Learn More

Regular Price: $499.99 ea.

Sale Price: $357.99 ea.

Add to Wishlist

Camaro Shock Absorber, Front, Gas Charged, Red, IAS Performer, Edelbrock, 1967-1969 Part # SS-185
Improves Handling On Rough Terrain Patented "Inertia Active System" Monotube Design Black Polyurethane Bushings Gas Charged   Rick's Camaros offers these gas charged shock absorbers for your multi-leaf spring 1967, 1968, or 1969 Camaro. Manufactured by Edelbrock, these patented Inertia Active System (IAS) performer monotube shocks use a patented inertia-activated valve that instantly adjusts to driving conditions. Simply enough, on smooth terrain, the valve closes to give you a firm ride, excellent cornering, and reduced body sway, and under rough conditions, the valve opens to make the shocks softer and more responsive. Your F-Body Camaro's wheels follow the contour of the driving surface for a smoother off-road ride. These shocks use polyurethane bushings for added responsiveness and their high-pressure, monotube design eliminates oil foaming and dissipates heat more effectively. Other features include nitro-steel piston rods, heavy-duty welds, and an attractive red powdercoated finish. Don't wait to improve your driving conditions on rough terrain. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968, or 1969 Camaro! Learn More
$99.99 ea.

Add to Wishlist

14 Item(s) Show per page
View as: Grid  List  Sort by
1