Product Experts Available 1-800-359-7717

Filter Your Results

  1. Remove This Item CATEGORY: Engine and Related
  2. Remove This Item brand: Classic Headquarters CHQ
 

CLASSIC HEADQUARTERS CHQ PARTS & ACCESSORIES

Items: 1 to 28 of 94 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. Next
Grid  |  List
Best Sellers
Camaro Hood Hinge Spring, For Cowl Induction Or Super Sport Hoods, 1967-1969 Part # HD-55
Reproduction of Original Correct for Super Sport & Cowl Induction Hood (Functions Perfectly with All Steel Hoods) 28 Coils 9 3/8" Long End to End Spring Steel Plated Dull Black Finish Sold Each Two Required Per Car The original hood hinge springs on your 1967, 1968, 1969 Camaro can become rusted and worn, preventing your hood to open and close properly. Old, original springs will lose tension over time, causing the hood to drop slightly when it is open. Rick's Camaros is happy to offer this high quality reproduction hood hinge, which will perfectly replace the original on your steel hood. Plated dull black, this hinge spring is 9-3/8 inches in length with 28 correct coils for specific spring rate on heavier SS hoods. Don't wait to replace your hood hinge springs, and get your hood operating cleanly and effectively. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968 or 1969 1st gen Camaro! WARNING: Hood springs in general are not recommended for use on fiberglass hoods as the extra tension can cause stress cracks in the fiberglass reinforcement resulting in hood failure. Learn More

Was: $17.99 ea.

Now: $14.99 ea.
Camaro Battery Junction Block, For Positive Cable To Front Light Wiring Harness, 1967-1969 Part # EP-134
Best Quality Reproduction Battery Junction Block  Mounts On Radiator Core Support & Joins Front Light Harness With Positive Lead Off Battery Cable Correct Part For Restoration Purposes This Camaro reproduction battery junction block is a crucial part of your Camaro's electrical system and it usually gets lost or is broken when you start taking your Camaro apart for restoration. Rick's has the best selection of Camaro parts like this battery junction block to make your Camaro restoration easier. Trust Rick's Camaros to bring you the best Camaro parts at the best possible pricing. Learn More
$8.99 ea.
Camaro Hood Adjustment Bolt & Nut Set, 1967-1972 Part # HD-18P
Best Quality Reproduction Hood Bolts And Nuts Includes Correct Slotted Bolts & Flanged Stop Nuts Attaches To Core Support Set Of 4 Pieces Replaces GM #3996899 (Screw) & 1359887 (Nut) Rick's Camaros is happy to offer this set of hood adjustment bolts and nuts for your 1967, 1968, 1969, 1970, 1971, or 1972 Camaro's hood. This kit attaches to the core support and barely touches the bottom of your Camaro hood to keep it in place. As your Camaro rolls down the road, the hood is constanly moving side to side and front to back on the hood hinges. When topped with the rubber hood bumpers, this kit keeps the hood from moving around too much and scraching your Camaro's paint and it keeps the hood from going down too far when it is shut. This set or four includes correct slotted head screws and flanged stop nuts. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968, 1969, 1970, 1971, or 1972 1st or 2nd gen Camaro! Learn More

Was: $8.99 pr.

Now: $7.99 pr.
Camaro Battery Cable Retaining Clip, Oil Pan, For Positive Cable, 1967-1981 Part # RC-331
Best Quality Reproduction Battery Cable Clip  Rubber Coated Small Hole Oil Pan Clearance Bend As Original (2) Required per Car Rick's First Generation offers this nice reproduction of the Camaro battery cable retaining clip which is a must for any Camaro restoration. This clip keeps the positive battery cable which runs down to the starter from coming into contact with the engine or frame reducing the possibility of abrasion. These clips were installed in the engine plant on two of the oil pan bolts before the engine was painted and put into your Camaro on the assembly line. So, they should be finished in Chevrolet orange the same way to be technically correct. Learn More
$7.99 ea.
Camaro Console Oil Pressure Gauge Oil Line, Small Or Big Block, 1967-1972 Part # CG-15
Best Quality Reproduction Console Gauge Oil Line Correct Black Line Unlike Other White Reproductions Sold Elsewhere Includes Brass Nuts & Ferrules Firewall Grommet Available Separately This Camaro reproduction oil pressure gauge oil line is made exactly like the original oil line going to the console gauges in your Camaro. Over time the original can become brittle or be damaged from pulling it through the firewall during your Camaro restoration. Rick's offers this console gauge oil line to replace your original line exactly. So, buy the best parts for your Camaro restoration from Rick's today. WARNING: Do not overtighten the nut on the oil gauge or fail to hold the back of the oil gauge with a wrench as this could cause damage to the oil gauge and cause the engine to pump all of the oil out of your engine into the console and floor of your Camaro. Learn More

Was: $11.99 ea.

Now: $8.99 ea.
Camaro Speedometer Cable Assembly, 71", With Firewall Grommet, 1969 Part # SC-78
Reproduction Of Original Firewall Grommet Installed   This Camaro reproduction speedometer cable assembly has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit and function will work superbly for your restoration. In addition, using a reproduction speedometer cable assembly from Rick's will add authenticity and value to your Camaro. Learn More
$31.99 ea.
Camaro Breather Hose Elbow Fitting, Small Block, Valve Cover, 1967-1973 Part # RC-80
Reproduction Of Original   This Camaro reproduction breather hose elbow fitting has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit and function will work superbly for your restoration. In addition, using a reproduction breather hose elbow fitting from Rick's will add authenticity and value to your Camaro. Learn More
$10.99 ea.
Camaro Speedometer Cable Firewall Grommet, 1967-1969 Part # SC-9
Accurate new reproduction of the original firewall speedo cable grommet. Includes high tension three tab spring steel insert that holds the grommet firmly to firewall. For all applications. Learn More

Was: $7.99 ea.

Now: $4.99 ea.
Camaro Speedometer Cable Assembly, 69", With Firewall Grommet, 1967-1968 Part # SC-72
Reproduction Of Original Firewall Grommet Installed   This Camaro reproduction speedometer cable assembly has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit and function will work superbly for your restoration. In addition, using a reproduction speedometer cable assembly from Rick's will add authenticity and value to your Camaro. Learn More
$34.99 ea.
Camaro Speedometer Cable Assembly, 62", With Firewall Grommet, 1969-1989 Part # SC-77
Reproduction Of Original 62" Cable Firewall Grommet Installed Your Camaro's speedometer can be your best friend, and your worst enemy, and that is where speedometer cable replacements come into play, provided by Rick’s Camaros. Your 1969-1989 Camaro's speedometer obviously tracks your truck's speed and helps you make sure that you're driving within the allowed speed limit. However, over time your speedometer can stop working properly, or stop working altogether. The problem is most likely your speedometer cable has gone bad, and will need replacing. This Camaro reproduction speedometer cable from Rick’s Camaros has been manufactured to original factory specifications and will easily replace your original cable. You will find the fit, black plastic coating finish and finely tuned speedometer function will work superbly for your restoration. In addition, using a reproduction speedometer cable from Rick’s Camaros will add value to your 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, or 1989 Camaro. Learn More
$32.99 ea.
Camaro Air Cleaner Cover, 14", Chrome, Restoration Correct, 1967-1972 Part # EP-29
Nice quality triple chrome plated accurate reproduction. Not a generic mass market chrome part. Fits all open element or cowl induction systems. Learn More
$42.99 ea.
Camaro Cowl Induction Seal, Hood To Air Cleaner Extension Flange, 1969 Part # CI-11
Best Quality Reproduction Black Extruded Rubber Correct Style Joint Sealing Tape As original The cowl induction air cleaner needs this seal to seal in the fresh air coming from the cowl hood. Over time the original can be flattened by the pressure of the hood against the cowl air cleaner. Replace yours today with this best quality reproduction from Rick's today to keep your cowl induction system pulling in the fresh air like it was designed to do! Learn More
$26.99 ea.
Camaro Engine Frame Mounts, Big Block 396 & 427ci, Show Correct, 1967-1968 Part # EP-6
Licensed GM Reproduction Black EDP Coating Fits 396 & 427 Engines Big Block Engines Driver's Side Height Of Mount = 3" Passenger's Side Height Of Mount = 2½" Width Of Both Mounts At The Motor Mount = 2½" Corresponding Motor Mount Available As Our Part # EP-89 The engine mounting brackets on your 1967 or 1968 Camaro are made to secure your engine motor mounts, which are meant to keep your engine in place and away from the radiator core or fan shroud. All parts are essential in your F-Body, but your mount bracket can rust over time from fluid exposure or from the constant barrage of outside elements. Eventually your brackets may lose their hold and fall off or break, leaving your motor mount and other engine components vulnerable. Rick’s Camaros is happy to offer these new OEM replacement engine frame mount brackets, made from high quality materials and correct stamped steel with OE thickness. These metal brackets attach to the crossmember of your Chevy Camaro, and are sold individually. Don’t wait to keep your engine components secure, and get a new pair of engine motor mount brackets today. From racers, show cars, hot rods, and daily drivers, you can trust Rick’s Camaros for all of your restoration and replacement needs for your 1967 or 1968 1st gen Camaro!    NOTE: Small block mounts will not work to mount the big block engine. Using small block mounts will result in the big block being too close to the steering box, off square and the cooling fan being out of place enough so a fan shroud will not fit. Learn More
$65.99 pr.
Camaro Cowl Induction Throttle Switch, 1969 Part # CI-26
Reproduction Of Original Mounts On Throttle Arm This Camaro reproduction cowl induction throttle switch has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit and performance will work superbly for your restoration. In addition, using a reproduction cowl induction throttle switch from Rick's will add authenticity and value to your Camaro. Learn More
$22.99 ea.
Camaro Breather Hose Elbow Fitting, Big Block, Valve Cover,1967-1972 Part # RC-81
 Reproduction Of Original   This Camaro reproduction breather hose elbow fitting has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit and function will work superbly for your restoration. In addition, using a reproduction breather hose elbow fitting from Rick's will add authenticity and value to your Camaro. Learn More
$15.99 ea.
Camaro Hood Hinge, Left, OE Style, Show Correct, 1967-1969 Part # HD-81
Show Correct Reproduction Of Original OE Style Original Gauge Material Quality Heavy Construction Gray Phosphate Plated Hardened Pivot Points Fits Driver's Side Rick's Camaros is proud to bring you show quality hood hinges to take out of the box and bolt right on your 1967, 1968, or 1969 Camaro! Why worry with the dangerous job of installing the springs yourself when you can buy these now and be ahead of the game? Replace your old hinges with this OE quality, reproduction hood hinge, made of original gauge material and accurately stamped from high strength steel. This hood hinge was constructed with hardened pivot points and correct dark gray phosphate plating, and will fit your F-Body's driver's side. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968, or 1969 1st gen Chevrolet Camaro! Learn More
$109.99 ea.
Camaro Speedometer Cable Assembly, 73", With Firewall Grommet, 1967-1968 Part # SC-73
Reproduction Of Original Firewall Grommet Installed   This Camaro reproduction speedometer cable assembly has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit and function will work superbly for your restoration. In addition, using a reproduction speedometer cable assembly from Rick's will add authenticity and value to your Camaro. Learn More
$36.99 ea.
Camaro Hood Hinge, Right, OE Style, Show Correct, 1967-1969 Part # HD-80
Show Correct Reproduction Of Original OE Style Original Gauge Material Quality Heavy Construction Gray Phosphate Plated Hardened Pivot Points Fits Passenger's Side Rick's Camaros is proud to bring you show quality hood hinges to take out of the box and bolt right on your 1967, 1968, or 1969 Camaro! Why worry with the dangerous job of installing the springs yourself when you can buy these now and be ahead of the game? Replace your old hinges with this OE quality, reproduction hood hinge, made of original gauge material and accurately stamped from high strength steel. This hood hinge was constructed with hardened pivot points and correct dark gray phosphate plating, and will fit your F-Body's passenger's side. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968, or 1969 1st gen Chevrolet Camaro! Learn More
$109.99 ea.
Camaro Air Cleaner Flame Arrestor Cap, 1967-1972 Part # RC-96
Reproduction OfOriginal Double Stainless Mesh Construction Fits Over Breather Tube Inside Air Cleaner Base   This Camaro reproduction air cleaner flame arrestor cap has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit and function will work superbly for your restoration. In addition, using a reproduction air cleaner flame arrestor cap from Rick’s will add authenticity and value to your Camaro.   Learn More
$10.99 ea.
Camaro Air Cleaner Assembly, Open Element, Chrome, 1967-1969 Part # EP-116
May Require Spacer If Using On Aftermarket Or Electric Chocke Carbs.  Correctly fits all Holley and Quadrajet 4 Barrel Carbs. Correct for 1967: 302 w/o A.I.R., 1968: 327 4 Barrel, 69: 302 & 396. Show quality reproduction includes genuine AC filter. Learn More
$92.99 ea.
Camaro Engine Frame Mounts, Big Block 396 & 427ci, Show Correct, 1969 Part # EP-7
Licensed GM Reproduction Black EDP Coating Fits 396 & 427 Big Block Engines Driver's Side Height Of Mount = 2½" Passenger's Side Height Of Mount = 2" Width Of Both Mounts At The Motor Mount = 2¼" Corresponding Motor Mount Available As Our Part # EP-90 Or EP-175   The engine mounting brackets on your 1969 Camaro are made to secure your engine motor mounts, which are meant to keep your engine in place and away from the radiator core or fan shroud. All parts are essential in your F-Body, but your mount bracket can rust over time from fluid exposure or from the constant barrage of outside elements. Eventually your brackets may lose their hold and fall off or break, leaving your motor mount and other engine components vulnerable. Rick’s Camaros is happy to offer these new OEM replacement engine frame mount brackets, made from high quality materials and correct stamped steel with OE thickness. These metal brackets attach to the crossmember of your Chevy Camaro, and are sold individually. Don’t wait to keep your engine components secure, and get a new pair of engine motor mount brackets today. From racers, show cars, hot rods, and daily drivers, you can trust Rick’s Camaros for all of your restoration and replacement needs for your 1969 Camaro!  NOTE: Small block mounts will not work to mount the big block engine. Using small block mounts will result in the big block being too close to the steering box, off square and the cooling fan being out of place enough so a fan shroud will not fit. Learn More
$65.99 pr.
Camaro Alternator Pulley, 302ci & 396/375hp, Deep Single Groove, 1968-1972 Part # ALT-831
Correct new reproduction for listed applications. High quality USA made pulley. Original plating. Learn More

Was: $41.99 ea.

Now: $38.99 ea.
Camaro Cowl Induction Relay, 1969 Part # CI-27
Imported reproduction at a great price when compared to original GM. Mounts to firewall Learn More
$25.99 ea.
Camaro Cowl Induction Flapper Valve Solenoid, 1969 Part # CI-19
Reproduction Of Original Highest Quality Available from Classic Headquarters Correct Part Number Stamping 1-year Manufacturer's Warranty This Camaro reproduction cowl induction flapper valve solenoid is a new superior reproduction of a part which originally had a high failure rate. All new tooling insures your cowl induction Camaro will be getting all the fresh air it needs when you need it! Learn More
$38.99 ea.
Camaro Hood Latch Release, Fits All (Non-Rally Sport Or Rally Sport RS), 1969 Part # HD-23
Best Quality Reproduction Hood Opening Mechanism Officially Licensed GM Restoration Part Fits All 69 Camaros With Flat, SS or Cowl Induction Hoods Correct Factory Gauge Metal Dark Gray Phosphate Plating As Original This Hood Latch Release Does Not Have The Aftermarket Manufacturer's Stamp Like Other Inferior Reproductions Out There If you need a new hood latch release mechanism for your 1969 Camaro, look no further! Over time, this part can rust and wear down, leaving your front hood not opening or locking properly. Rick's Camaros offers this show quality reproduction hood latch release, made with correct gauge, dark gray phosphate plating, and no manufacturer embossing. This officially GM licensed hood catch will replace your original F-Body's standard hood. Trust Rick's Camaros for all of your restoration and replacement needs for your 1969 1st gen Rally or non Rally Sport Camaro! Learn More
$68.99 ea.
Camaro Air Filter Element, Show Quality, 1967-1972 Part # CI-35
Best Quality Reproduction High Pleat Count Performance Filter Correct Style Wire Mesh For All Open Element & Cowl Induction Air Cleaners Reproduction air filter element for open element or cowl induction. Filter is closer to the original design than current AC Delco filters. Learn More
$11.99 ea.
Camaro Speedometer Cable Assembly, 58", With Firewall Grommet, 1967-1968 Part # SC-71
Reproduction Of Original Firewall Grommet Installed   This Camaro reproduction speedometer cable assembly has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit and function will work superbly for your restoration. In addition, using a reproduction speedometer cable assembly from Rick's will add authenticity and value to your Camaro. Learn More
$34.99 ea.
Items: 1 to 28 of 94 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. Next
Grid  |  List
3