Product Experts Available 1-800-359-7717

Filter Your Results

  1. Remove This Item CATEGORY: Interior Parts and Trim
  2. Remove This Item brand: Classic Headquarters CHQ
CATEGORIES
  1. Console (60)
  2. Dash (83)
  3. Door (77)
  4. Gauges (6)
  5. Headliners (3)
  6. Rear Compartment (5)
  7. Seat Belts (7)
  8. Seats (7)
  9. Sun Visors (7)
PRICE
  1. $0.00 to $9.99 (59)
  2. $10.00 to $14.99 (45)
  3. $15.00 to $24.99 (55)
  4. $25.00 to $49.99 (50)
  5. $50.00 to $799.99 (45)
 

CLASSIC HEADQUARTERS CHQ PARTS & ACCESSORIES

Items: 1 to 28 of 254 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next
Grid  |  List
Best Sellers
Camaro Sunvisor Support, With Visor Clamp Screw, Coupe, 1967-1969 Part # IN-142
Best Quality Reproduction Sunvisor Support Highly Polished Triple Chrome Plating Superior Materials & Accurate Shaft Placement Better Fit Than Expensive GM Replacement Part Includes Correct Style Chrome Visor Clamp Screw Fits Driver's Or Passenger's Side Fits 1st Gen 1967-1969 Camaro Coupes   A rusted and worn sunvisor support can ruin the overall image of your 1967, 1968, or 1969 first generation F-Body Camaro's interior. Over time, the support can lose its chrome shine, fade, and even start to peel. Even worse the support socket shaft hole can become brittle, making the support loose and possibly break off. Not only will this ruin your interior's look, but it will leave your sunvisor loose, distracting you while driving. Rick's Camaros wants to ensure your safety, by offering this high quality restoration correct sunvisor support with visor clamp screw for your F-Body. This original GM version support is triple chrome plated with a great looking polished finish. It will fit either the passenger or driver's side of your Chevy Camaro's interior, and will prove to be an even better fit than the expensive GM replacement alternative part. With high quality materials and correct shaft placement, you won't have to worry about your sunvisor support breaking in the future. This part also includes a correct style chrome visor clam screw to keep everything secure and looking great. Don't wait to add a classy look to your interior that will also keep you safe on the road. From racers, show cars, street rods, and daily drivers, you can trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968, or 1969 1st generation Camaro! Learn More
$21.99 ea.
Camaro Window Crank Handle, With Clear Knob, Door Or Quarter, 1967-1981 Part # IN-49R
Best Quality Reproduction Camaro Window Crank Handle Hard Chrome Over Diecast With Crystal Clear Knob (Not Incorrect Hazy Yellow)  Reproduction Of Original GM Replacement Window Crank Handle Correct Length Internal Splines For Tight Engagement With All Reproduction & Original GM Window Regulators Retaining Clip Included Sold Each   Your 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981 Chevy Camaro window handle goes through a lot. Over time, fatigue and stress slowly wear at your F-Body Camaro window handle, causing it to fail. Sometimes the mounting slot becomes oblong and stripped, or your knob breaks free. Other times, your Camaro window handle simply snaps in half. Rick's Camaros knows the importance of a properly made 1967-1981 Camaro window handle and is proud to offer the very best. More than a simply good looking chrome plated window handle, these new reproductions are made with modern materials and manufacturing techniques to withstand excessive window use for years to come. Die cast like the factory units, these window cranks are then chrome plated and a stylish knob is added to give that authentic look to your interior. Rick's Camaros knows that rechroming that old original takes away a lot of fine detail, and rechroming cannot fix hidden stress cracks. Truly a high quality 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981 Chevy Camaro window handle at an unbeatable price, Rick's Camarso will help to provide all of your Camaro restoration and replacement needs.   NOTE: Some window regulators on the market today have splines which are a little too long for the handle clip to engage. This can be remedied by shaving down the shoulder in the window crank with a dremel tool.   Learn More
$7.99 ea.
Camaro Dash Air Conditioning & Astro Vent Ball, Chrome, 1967-1968 Part # IN-24
Quality Reproduction 2 Required Per Car Chrome Plated Fits 1967-1968 1st Gen Camaros Old air conditioning deflectors are an eyesore to any fresh 1967, 1968, 1969 first generation Camaro interior. Plastics fade over time, chrome plating peels, and sometimes the vent blades are simply broken or go missing. Rick's Camaros is proud to offer these new dash air conditioning deflectors and Astro Vent Ball, made to OE specifications and vacuum chrome metallized plated just like originals. Replacement is easy and fast with simple hand tools and minimal mechanical knowledge. Two are required per vehicle. Now is the time to replace those old worn units and bring that 1967, 1968, 1969 1st gen F-Body Camaro's interior back to life with quality parts from Rick's Camaros. Learn More
$19.99 ea.
Camaro Bucket & Bench Seat Hinge Arm Covers, With Fasteners, 1967-1970 Part # IN-94
Superior Reproduction of Original Correct Madrid Grain Pattern Injection Molded Black with UV Protectant Paint to Match Color Interiors  (2) Correct Fasteners Included (2) Pair Required per Bucket Seat Car (1) Pair Required for Outer Hinges on Bench Seat Cars Your old seat hinge arm covers have most likely been through a lot of abuse over the years, since they are used often in your 1967, 1968, 1969, or 1970 Camaro. Original plastic pieces show their age with many scratches and cracks, leaving the arm covers looking dry and completely worn. Your Camaro's interior was not mean to look like this, so it's time to do something about it! Rick's Camaros is proud to offer these superior reproduction bucket and bench seat hinge arm covers to cover the hinge pivot points of your Camaro's seats. With correct Madrid grain vinyl, injection molded black UV protected material, and paint to match your color interiors, this deal is too good to pass up. Fasteners are also included to help attach your new replacement arm covers. Rest assured that these new seat hinge arm covers to get your F-Body Camaro looking fresh and new again. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968, 1969, or 1970 Camaro!   Learn More

Was: $22.99 pr.

Now: $20.99 pr.
Camaro Quarter Window Roller Assembly, Lower, Middle, 1967-1969 Part # QW-6
Officially Licensed Reproduction Contains: Lower Middle Roller With Stud, Slotted Washer, Glass Bushing, Glass Gasket, Special Retaining Nut All Pieces Made Of Original Materials & Correct Plating Fits Driver's (Left) Or Passenger's (Right) Side Two Required Per Car Special Nut Tool Available Separately As Part # HW-26 The lower middle roller on the quarter window of the Camaro takes most of the torque and stress from the window regulator on your 1967, 1968, or 1969 first generation Camaro. Over time, the grease wears out of the quarter window track and even forces work on the roller until the quarter window will eventually not roll up properly. Fix your Camaro quarter windows today with this superior reproduction from Rick's Camaros. Including the lower middle roller with stud, slotted washer, glass bushing and gasket, and special retaining nut, this complete quarter window assembly will fit either the left or right side of your F-Body. All installation tools have correct plating and materials that will exactly match your original assembly. With two required per Chevy Camaro, don't wait to fix the roller assembly for both of your Camaro's quarter windows. From racers, show cars, hot rods, and daily drivers, you can trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968, or 1969 1st gen Camaro! Learn More

Was: $12.99 ea.

Now: $10.99 ea.
Camaro Console Or Ashtray Lid Bumpers, 1967-1969 Part # WS-62
Best Quality Reproduction Rubber Bumpers Molded Black Rubber Correct Low Profile So The Console Lid Or Ash Tray Lid Sits Properly Sold As A Pair   Over time, rubber can deteriorate leaving parts like the console or ashtray lid in your Camaro rubbing against the console housing causing squeaks and ultimately damaging your expensive console. Rick's Camaros offers the correct height bumpers to keep the lids sitting properly and reducing squeaks. Buy the best parts for your Camaro from Rick's Camaros today and know you are getting the best parts for your restoration.     Learn More
$2.99 pr.
Camaro Door Handle, Inside, Standard Interior, Left Or Right, 1967 Part # IN-131
Best Quality Reproduction Inner Door Handle  Hard Chrome over Die Cast For Standard Interior Cars Attaching Clip Included Fits LH or RH side Rick's First Generation offers this super nice reproduction of the 1967 Camaro standard interior door handle. Most original handles become pitted and discolored due to inconsistencies in the original die-cast/chroming process. This reproduction standard inner door handle has the correct spline depth to insure it will function properly with your Camaro original door opening mechanisms or new replacements and look great while doing it! Learn More
$13.99 ea.
Camaro Bucket Seat Back Rubber Stoppers, With Metal Inserts& Mounting Screws, 1967-1970 Part # IN-1
Reproduction Of Original Correct Height Steel Inserts Inside Screws Included 1 Pair Does 2 Seats   The seat back rubber stoppers on your 1967, 1968, 1969, or 1970 Camaro are applied on the back of your seats where your seats fold down. They are put here in order to protect your seats from rubbing against each other when folded down, thus keeping your Camaro interiors in prime condition. Rick’s Camaros is happy to offer this pair of rubber stoppers for your Camaro seat back. These match factory specifications and will replace your original stoppers. These stoppers have a steel insert inside, and also have mounting screws included for easy installation.  Trust Rick’s Camaros for all of your restoration and replacement needs for your 1967, 1968, 1969, or 1970 Camaro. Learn More
$7.99 pr.
Camaro Door Lock Striker, 1967-1981 Part # DH-15
Best Quality Reproduction Door Lock Striker Correct Allen Head Hardened Striker Latch Collar Zinc Plated Two Required Per Car Your original Camaro door lock striker has probably taken a beating over the years. The heavy doors of a Camaro are prone to wear out the door hinges which leads to the door lock striker taking severe blows eventually causing it to fail. Replace your worn Camaro door lock striker in your Super Sport (SS), Rally Sport (RS), Z28, Type LT or Berlinetta today with this superior reproduction from Rick's First Generation.   Learn More

Was: $13.99 ea.

Now: $12.99 ea.
Camaro Dash Vent Ball Bezel Retainer & Hardware, 1967-1968 Part # IN-63
Reproduction Of Original Retains Top Of Vent Bezel To Dash Panel Mounting Screws Included 2 Required Per Car   This Camaro reproduction dash vent bezel retainer has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit and function will work superbly for your restoration. In addition, using a reproduction dash vent bezel retainer from Rick's will add authenticity and value to your Camaro.     Learn More
$8.99 ea.
Camaro Seat Belt Anchor Bolt, Front, Outer, 1967-1981 Part # RC-531
Best Quality Reproduction Seat Belt Bolt  Exact GM and DOT Standards Highly Polished Plating Thread Sealant Applied as Original Fits Front Seat Outer Retractor Belt Positions Sold Each (2) Required per Car Seat belt bolts pass through the seat belt and on through the floor of  your Camaro. The applied sealant keeps air and water from entering the passenger's compartment. The end of the bolt threads usually get rusty making the bolt useless at times and possibly unsafe. Why take a chance with a major safety item in your Camaro? Replace your rusty original parts like these seat belt bolts with these OEM quality ones from Rick's First Generation today.   NOTE: Original front seat belt bolt heads are chrome plated. The highly polished plating can be quickly buffed to mimic the chrome plating of the original bolts. Learn More

Was: $8.99 ea.

Now: $6.99 ea.
Camaro Ignition Switch Bezel Retaining Nut, 1967-1968 Part # IN-19
Best Quality Reproduction Ignition Bezel Nut Die Cast As Original Hard, Triple Chrome Plated Finish Proper Size Thread For Ignition Switch The ignition switch retaining bezel nut is one of the hardest items to remove from the dash of your Camaro and one of the easiest to destroy beyond all recognition if you do not have the proper tool. As an early anti-theft device the ignition bezel nut worked pretty good to keep the ignition switch in the dash of  your Camaro. But, if it ever needed to be removed, most people just grabbed a pair of channel locks and destroyed the bezel. Not a problem with this superior reproduction ignition bezel nut from Rick's Camaros. Rick's offers only the best parts for your Camaro at the best possible pricing.   . Learn More

Was: $9.99 ea.

Now: $7.99 ea.
Camaro Cigarette Lighter Receptacle, 1967-1969 Part # RP-13
Best Quality Reproduction Cigarette Lighter Rochester Type Receptacle Correct Size and Thread Not A Generic "Fit-The-Hole" Replacement Replaces Defective Original To Work As A Power Point For A Cell Phone, Smart Phone, iPhone® Or iPod® Retainer Available Separately as our Part # RP-15 The cigarette lighter receptacle (also known as a caseload) in older Camaros suffers from years of abuse and ash buildup, and thus cannot be used for hookups in modern society. Rick's Camaros is happy to offer a new reproduction cigarette lighter receptacle, matching factory specifications and replacing your old receptacle, thus enabling use of other electronics. Don't forget to order the retainer to hook up a place to plug in your cell phone or iPhone®. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968, or 1969 Camaro! Learn More
$29.99 ea.
Camaro Door Handle, Inside, Standard Interior, Left, 1968-1969 Part # IN-130
Best Quality Reproduction Inner Door Handle Hard Chrome over Die Cast For Standard Interior Cars Attaching Clip Included Fits Driver's Side Ricks Camaros new interior door handles provide that fresh look to make any Chevrolet F-Body Camaro interior restoration pop. Typically pitted or worn from years of use, your Camaro inside door handles tends to fade and wear to a less then showroom fresh appearance. Reusing an old unit may bring your Camaro interior restoration to appear incomplete. Original used Camaro door handles sometimes contain little stress fractures form years of fatigue cause the cast unit to snap. Others maybe oblong at the attaching points resulting in a loose sloppy feel. Ricks Camaros understands that a quality restoration begins with a quality part. Our Camaro interior door handles are casted using the most modern techniques and advances in metallurgy to bring you the very best and the lowest price possible. Triple chrome plated for durability, this Camaro interior door handle will bring that show n’ shine back to your Chevy Camaro cockpit. Don’t settle for a used old unit to replate only to find replating may remove some of the fine detail you need. Ricks Camaros has you covered whether for restoration, hot rod, or daily driver, our Camaro interior door handle will bring the value and shine your classic deserves. Trust Ricks Camaros to help get your Camaro interior looking sharp again.   Learn More

Was: $16.99 ea.

Now: $14.99 ea.
Camaro Glove Box Mounting Screw Set, 1967-1969 Part # HW-40
Best Quality Reproduction Glove Box Screws Correct For Restoration Purposes (7) Screws With Captured Washer Black Finish As Original One Set Required Per Car For 1st Gen Camaro Glove Boxes The glove box is usually one of the first things to be destroyed in the interior of your 1967, 1968, or 1969 first generation Camaro, and it will need to be replaced. Why install a brand new glove box with old, scratched, and rusted screws? Pick up a correct set to finish off your glove box installation and keep your Camaro show fresh and fully functional with this correct set of seven black mounting screws. Not only will your new glove box look great in your F-Body's interior, but you can rest assured that it will be secured with brand new mounting hardware as well. From racers, show cars, hot rods, and daily drivers, you can trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968, or 1969 1st gen Camaro! Learn More

Was: $6.99 ea.

Now: $4.99 ea.
Camaro Quarter Window Roller Guide Assembly, Center, Lower,1967-1969 Part # QW-1
Best Quality Reproduction Center Lower Guide Roller Lower Middle Roller With Stud Threaded Stud Assembly Fits Driver's (Left) Or Passenger's (Right) Side Two Required Per Car Complete Roller Assembly Available Separately, Part # QW-6 Your 1967 or 1969 Camaro’s quarter window roller assembly can be taken for granted until it stops working. The lower middle roller on the quarter window of your Camaro takes most of the torque and stress from the window regulator. Over time, the grease wears out of the quarter window track and even more forces work on the roller until eventually, you will find that the quarter window will not roll up properly. Rick’s Camaros offers a new quarter window roller assembly center lower guide and threaded stud assembly for your Camaro. All tools made from original materials and having correct plating, you will not be disappointed. Fix your Camaro quarter windows today with this superior reproduction. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967 or 1969 1st gen Camaro! Learn More
$5.99 ea.
Camaro Armrest Base Mounting Screw Set, Front, 1968-1969 Part # HW-53
Best Quality Reproduction Armrest Base Screw Set Mounts Armrest Base To Door Panel Correct For Restoration Correct Finish Set Of 6 Screws   Your armrest base is held together and secured by mounting screws, and over time these screws can become loose or go missing, leaving your armrest base loose itself. In order to keep everything in your 1968 or 1969 Camaro’s interior looking good and secured, replace your original set and get a new mounting screw set for your armrest base. Rick’s Camaros offers this quality reproduction base screw set, consisting of six screws, mounts your armrest base to your Camaro’s door panel. Matching factory specifications, this screw set is correct for restoration and has a correct finish for your Camaro. You’ll feel better knowing that these new screws are sure to keep your armrest secure and sturdy in your Camaro. Trust Rick’s Camaros for all of your restoration and replacement needs for your 1968 or 1969 Camaro. Learn More

Was: $7.99 Set

Now: $6.99 Set
Camaro Windshield Wiper Switch Knob, 1967-1968 Part # WB-19
Best Quality Reproduction Wiper Switch Knob Diecast Metal Unlike Cheap Plastic Reproductions Offered Elsewhere Highly Polished Chrome High Quality Set Screw To Keep The Knob In Place Wiper knobs are notorious for becoming worn from use. The Camaro windshield wiper knob will over time become loose from the wiper switch shaft and eventually fall off. When you try to tighten the screw, it will strip out making your Camaro wiper knob useless. Buy the best reproduction parts for your Camaro from Rick's Camaros. Learn More

Was: $9.99 ea.

Now: $7.99 ea.
Camaro Dash Air Conditioning & Astro Vent Bezel, Side, Left, Chrome, With Notch, 1968 Part # IN-126
Best Quality AC & Astro Ventilation Bezel Officially Licensed GM Restoration Part Bright Chrome Over Plastic As Original Includes Dash Notch Unlike Other "One Side Fits All" Reproductions Fits Driver's Side This reproduction of the 1968 Camaro dash bezel is as correct as it gets! Nice chrome plating over correctly molded plastic with the dash notch for clearance just as the original one that came in your Camaro from the factory. Do not be fooled by less expensive reproductions which are one side fits all. Purchase the best parts from Rick's Camaros today to insure you are getting the correct Camaro parts for your restoration. Learn More

Was: $23.99 ea.

Now: $21.99 ea.
Camaro Headlight Switch Knob, With Shaft, 1967-1968 Part # RP-6
Best Quality Reproduction Headlight Switch Knob  Bright Chrome Molded Plastic Knob  Plated Metal Shaft Rick's offers this superior reproduction of a commonly broken Camaro part. The headlight switch knob gets all of the sunlight it can stand making it brittle and prone to crack. When the knob cracks, it will fall off leaving the shaft to operate the headlights of your Camaro. Replace your broken original Camaro headlight knob and any other needed parts today with the best reproductions from Rick's First Generation.   NOTE: To remove the original shaft: There is a spring button on top of the headlight switch behind the dash. Hold the button down, turn the shaft counter clockwise until it stops, pull the shaft and it should come out.   Learn More
$15.99 ea.
Camaro Cigarette Lighter Assembly, With Element, 1967-1968 Part # RP-7
Best Quality Reproduction Cigarette Lighter  Rochester Type Correct Chrome Knob Element Included Receptacle and Retainer Available Separately as our Part # RP-13 and RP-15 Nice reproduction of an often missing part on the Camaro. Back in the day, many people actually used the cigarette lighter in their Camaro. Today, most people do not really the lighter for anything but looks to cover up the hole in the middle of the dash. Replace your missing one today with this quality reproduction from Rick's First Generation. Don't forget to order the receptacle and the retainer to hook up a place to plug in your cell phone or iPhone®. Learn More
$21.99 ea.
Camaro Dash Air Conditioning & Astro Vent Bezel, Side, Right, Chrome, 1968 Part # IN-125
Best Quality AC & Astro Ventilation Bezel Officially Licensed GM Restoration Part Bright Chrome Over Plastic As Original Distinct RH Side Unlike Other "One Side Fits All" Reproductions Fits Passenger's Side This reproduction of the 1968 Camaro dash bezel is as correct as it gets! Nice chrome plating over correctly molded plastic for the RH side just as the original one that came in your Camaro from the factory. Do not be fooled by less expensive reproductions which are one side fits all. Purchase the best parts from Rick's Camaros today to insure you are getting the correct Camaro parts for your restoration.   Learn More
$21.99 ea.
Camaro Console Oil Pressure Gauge Oil Line, Small Or Big Block, 1967-1972 Part # CG-15
Best Quality Reproduction Console Gauge Oil Line Correct Black Line Unlike Other White Reproductions Sold Elsewhere Includes Brass Nuts & Ferrules Firewall Grommet Available Separately This Camaro reproduction oil pressure gauge oil line is made exactly like the original oil line going to the console gauges in your Camaro. Over time the original can become brittle or be damaged from pulling it through the firewall during your Camaro restoration. Rick's offers this console gauge oil line to replace your original line exactly. So, buy the best parts for your Camaro restoration from Rick's today. WARNING: Do not overtighten the nut on the oil gauge or fail to hold the back of the oil gauge with a wrench as this could cause damage to the oil gauge and cause the engine to pump all of the oil out of your engine into the console and floor of your Camaro. Learn More

Was: $11.99 ea.

Now: $8.99 ea.
Camaro Door Lock Knob Ferrules, 1968-1969 Part # IN-164
Best Quality Reproduction Door Lock Ferrules Factory Original Narrow Trim Ring Correct Star Rag Felt Insert Fits Standard or Deluxe Interior Door Panels Sold as a Pair Best reproduction of the Camaro lock knob ferrules available. This correct pair of Camaro ferrules duplicates the original, factory GM part exactly. Currently available GM replacement ferrules are incorrect with a wide, flat trim ring. If you are replacing your Camaro door panels, you will need new ferrules. Rick's offers this pair of door lock ferrules as one of the best parts for your restoration. Learn More

Was: $13.99 pr.

Now: $11.99 pr.
Camaro Headliner Installation Tool, 1967-1969 Part # HL-5
Headliner Installation tool makes headliner installation easier. Learn More
$10.99 ea.
Camaro Astro Vent Outlet, Dash, Side, 1969 Part # IN-56
Best Quality Reproduction  Mounts On Each Side Of Dash Vent Is Accurately Reproduced In Every Detail Two Required Per Car This Astro dash vent outlet is the nicest reproduction outer vent outlet available on the market for your 1969 Camaro. This is not a reproduction of the later model replacement vent that simply "fills the hole," but rather is an accurate reproduction of the vent which came in your Camaro, down to the most minute details! Replace your broken or discolored original vent outlet with a new outer dash vent from Rick's Camaros to keep the air flowing and to keep your Camaro looking its absolute best! Trust Rick's Camaros for all of your restoration and replacement needs. Learn More
$26.99 ea.
Camaro Window Crank Handle, With Black Knob, Show Quality, 1968-1969 Part # IN-180
Best Quality Reproduction Window Crank Handle Correct For All 1968 & 1969 Camaro Front Door Windows Correct For All 1968 Camaro Rear Quarter Windows  Technically Correct Profile & Knob Correct Spline Depth Retaining Clip Included Your 1968, 1969 Chevy Camaro window handle goes through a lot. This little window crank multiples the up and down forces in order to raise or lower your window. Over time, fatigue and stress slowly wear at your F-Body Camaro window handle causing it to fail. Sometimes the mounting slot becomes oblong and stripped, or your knob breaks free. Other times, your Camaro window handle simply snaps in half. Ricks Camaro knows the importance of a properly made 1968, 1969 Camaro window handle and is proud to offer the very best. Simply more them a good looking chrome plated window handle, these new reproductions are made with modern materials and manufacturing techniques to will withstand the rigors job of raising and lowering your Camaro window for years to come. Die cast like the factory units, these window cranks are then chrome plated and stylish knob is added to give that authentic look back to your interior. Ricks Camaro knows that rechroming that old originals takes away a lot of fine detail, and rechroming can’t fix hidden stress cracks. Truly a high quality 1968, 1969 Chevy Camaro window handle at an unbeatable price, Ricks Camaro will help to get your Camaros restoration done right. Learn More
$14.99 ea.
Camaro Window Crank Handle, With Black Knob, Door, 1967 Part # IN-118
Best Quality Reproduction Window Crank Handle 1967 Camaro Exclusive Handle Which Is Shorter & Has A Flatter Curve Than Later Years Correct Thin Style Black Plastic Knob Hard Triple Chrome Over Diecast As Original Includes Retaining Clip   Your 1967 Chevy Camaro window handle goes through a lot. This little window crank multiples the up and down forces in order to raise or lower your window. Over time, fatigue and stress slowly wear at your F-Body Camaro window handle causing it to fail. Sometimes the mounting slot becomes oblong and stripped, or your knob breaks free. Other times, your Camaro window handle simply snaps in half. Ricks Camaro knows the importance of a properly made 1967 Camaro window handle and is proud to offer the very best. Simply more them a good looking chrome plated window handle, these new reproductions are made with modern materials and manufacturing techniques to will withstand the rigors job of raising and lowering your Camaro window for years to come. Die cast like the factory units, these window cranks are then chrome plated and stylish knob is added to give that authentic look back to your interior. Ricks Camaro knows that rechroming that old originals takes away a lot of fine detail, and rechroming can’t fix hidden stress cracks. Truly a high quality 1967 Chevy Camaro window handle at an unbeatable price, Ricks Camaro will help to get your Camaros restoration done right. Learn More
$12.99 ea.
Items: 1 to 28 of 254 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next
Grid  |  List
4