Product Experts Available 1-800-359-7717

Filter Your Results

  1. Remove This Item CATEGORY: Engine and Related
  2. Remove This Item brand: Edelbrock
CATEGORIES
  1. Air Intake (1)
  2. Camshaft and Valve train (1)
  3. Emissions (1)
  4. Performance (4)
PRICE
  1. $60.00 to $79.99 (1)
  2. $150.00 to $199.99 (1)
  3. $800.00 to $999.99 (1)
  4. $5000.00 to $5999.99 (2)
  5. $6000.00 to $7999.99 (2)
 

EDELBROCK PARTS & ACCESSORIES

Edelbrock

EDELBROCK TODAY

Edelbrock Corporation has seven locations: four in Torrance and three in San Jacinto, California, totaling over 500,000 square feet. Torrance Headquarters include: R&D; manufacturing; state-of-the-art testing facilities, advertising and tech support.

Less than a mile away are the Russell Plumbing, as well as our Distribution Center and Vic’s Garage. This location also houses the Company’s collection of street rods and classic cars, as well as the company archives containing our extensive collection of historic photos and memorabilia. Our Aluminum Foundries are located close by in San Jacinto. In 2008 we added a new Permanent Mold and Heat Treat facility next to our existing sand cast foundry, which has been called “the most state-of-the-art sand cast foundry west of the Mississippi.” This investment in American facilities is part of our commitment to “Made in USA” products and performance.

INTO THE FUTURE... “Proven Performance” is the philosophy that began with Vic Sr. in 1938 and it continues today with the same high standards of performance and quality. Vic Sr. would be proud of what has grown out of his small garage in Los Angeles, California.

On tap for 2012 is the expansion of the E-Force Supercharger line. Edelbrock is continuing the success of the E-Force systems with new applications for the 2003-11 GM Trucks, 2007-Later Ford Expedition and Lincoln Navigator along with a universal LS3 system for use in street rods and muscle cars. These revolutionary designs deliver instant, reliable and safe horsepower with low boost for minimum stress on the engine. And they fit under the stock hood!

We are also excited to announce the development of our new E-Street universal electronic fuel injection system. The E-Street EFI system is intended as an affordable, easy to use, fuel injection solution that can be installed on any V8 engine, originally equipped with a carburetor. It includes a pre-assembled throttle body, engine control unit (ECU), 7" touch screen tablet, high quality wiring harness, wide band oxygen sensor and instructions for a trouble free installation. This system will make upgrading from a carbureted setup to modern electronic fuel injection simple.

7 Item(s) Sort by: Show: per page Grid  |  List
Edelbrock 2010-2014 Camaro E-Force Street Supercharger Kit, With Manual Transmission Part # 719647
Supercharger Manifold Assembly (Featuring Eaton TVS Rotors) Cast Aluminum Alternator/Idler Bracket Heavy Duty Automatic Belt Tensioner Dual, High Capacity, Bar & Plate Intercoolers Full Face Low Temp. Heat Exchanger for Intercooler System Extruded Aluminum Fuel Rails with -6 AN Lines Electric Intercooler Water Pump Intercooler Recovery Tank Steel Idler Pulleys With Heavy Duty High Speed Bearings For Manual Transmission The Edelbrock E-Force Supercharger can take your already high performance street car to the next level. This supercharger kit is exclusively tailored for the 2010, 2011, 2012, 2013 or 2014 Camaro SS and will allow you to boost your performance to a whole new level. The unique features of this kit are the 12" long intake runners that allow for maximum low end torque and the optional 5 year 100,000 mile warranty. Its compact design fits under the stock hood and complements the clean look of the engine compartment. The street kits include the components from the competition kits, plus other items needed for daily driver use. Trust Rick's Camaros for all of your restoration and replacement needs for your 2010, 2011, 2012, 2013, or 2014 F-Body Camaro!  Learn More

Was: $8,889.99 Kit

Now: $7,199.99 Kit
Edelbrock 2010-2014 E-Force Camaro Street Supercharger Kit, For Automatic Transmission Part # 719646
Supercharger Manifold Assembly (Featuring Eaton TVS Rotors) Cast Aluminum Alternator/Idler Bracket Heavy Duty Automatic Belt Tensioner Dual, High Capacity, Bar & Plate Intercoolers Full Face Low Temp. Heat Exchanger for Intercooler System Extruded Aluminum Fuel Rails with -6 AN Lines Electric Intercooler Water Pump Intercooler Recovery Tank Steel Idler Pulleys With Heavy Duty High Speed Bearings For Automatic Transmission The Edelbrock E-Force Supercharger can take your already high performance street car to the next level. This supercharger kit is exclusively tailored for the 2010, 2011, 2012, 2013, or 2014 Camaro SS and will allow you to boost your performance to a whole new level. The unique features of this kit are the 12" long intake runners that allow for maximum low end torque and the optional 5 year 100,000 mile warranty. Its compact design fits under the stock hood and complements the clean look of the engine compartment. The Street kits include the components from the competition kits, plus other items needed for daily driver use. Trust Rick's Camaros for all of your restoration and replacement needs for your 2010, 2011, 2012, 2013, or 2014 F-Body Camaro!  Learn More

Was: $8,889.99 Kit

Now: $7,199.99 Kit
Edelbrock 2010-2014 Camaro E-Force Competition Supercharger Kit, For Automatic Transmission Part # 719645
Supercharger Manifold Assembly (Featuring Eaton TVS Rotors) Cast Aluminum Alternator/Idler Bracket Heavy Duty Automatic Belt Tensioner Dual, High Capacity, Bar & Plate Intercoolers Full Face Low Temp. Heat Exchanger for Intercooler System Extruded Aluminum Fuel Rails with -6 AN Lines Electric Intercooler Water Pump Intercooler Recovery Tank Steel Idler Pulleys With Heavy Duty High Speed Bearings For Automatic Transmission The Edelbrock Competition Supercharger can take your already high performance street car to the next level. This supercharger kit is exclusively tailored for the 2010, 2011, 2012, 2013, or 2014 Camaro SS and will allow you to boost your performance to a whole new level. The unique features of this kit are the 12" long intake runners that allow for maximum low end torque and the optional 5 year 100,000 mile warranty. Its compact design fits under the stock hood and complements the clean look of the engine compartment. This E-Force Competition Supercharger kit is based off of our street supercharger kit P/N 719646, but is paired down to the essential components that a racer needs, without the extras that experienced racers prefer to customize for their own competitive advantage. For competition racing use only. Trust Rick's Camaros for all of your restoration and replacement needs for your 2010, 2011, 2012, 2013, or 2014 racing Camaro!  Learn More

Was: $8,889.99 Kit

Now: $5,999.99 Kit
Edelbrock 2010-2014 Camaro E-Force Competition Supercharger Kit, Manual Transmission Part # 719644
Supercharger Manifold Assembly (Featuring Eaton TVS Rotors) Cast Aluminum Alternator/Idler Bracket Heavy Duty Automatic Belt Tensioner Dual, High Capacity, Bar & Plate Intercoolers Full Face Low Temp. Heat Exchanger for Intercooler System Extruded Aluminum Fuel Rails with -6 AN Lines Electric Intercooler Water Pump Intercooler Recovery Tank Steel Idler Pulleys With Heavy Duty High Speed Bearings For Manual Transmission The Edelbrock Competition Supercharger can take your already high performance street car to the next level. This supercharger kit is exclusively tailored for the 2010, 2011, 2012, 2013, or 2014 Camaro SS and will allow you to boost your performance to a whole new level. The unique features of this kit are the 12" long intake runners that allow for maximum low end torque and the optional 5 year 100,000 mile warranty. Its compact design fits under the stock hood and complements the clean look of the engine compartment. This E-Force Competition Supercharger kit is based off of our street supercharger kit P/N 719647, but is paired down to the essential components that a racer needs, without the extras that experienced racers prefer to customize for their own competitive advantage. For competition racing use only. Trust Rick's Camaros for all of your restoration and replacement needs for your 2010, 2011, 2012, 2013, or 2014 racing Camaro!  Learn More

Was: $8,889.99 Kit

Now: $5,999.99 Kit
Edelbrock 1967-1992 Camaro LS Intake Manifold Kit Part # 790419
Affordable & Trouble Free Solution For Running A Late Model Motor Made In USA Solid State Electronics 1,500-6,500 Operating RPM Range Dual Plane Intake Style Natural Aluminum Intake Finish Dual Pattern Carburetor Flange (Square Or Spread Bore) Uses Factory GM Sensors & Coils (Not Included) Works With 24x Crank Sensors Only (Pre 2006 GM V8) Rick's Camaros offers this LS intake manifold kit, manfactured by Edelbrock, for your 1967-1992 Camaro. This kit, developed by MSD & Edelbrock, will let you use any Vortec 4.8, 5.3, 6.0, or LS1/LS6 (1997-2004). The smaller 4.8 & 5.3 are plentiful and very affordable in salvage yards due to the complexity of the computer and wiring. All you need with this kit is a carburetor, and the factory sensors and coil packs from the donor vehicle. The Edelbrock/MSD ignition controller plugs into the factory sensors and coil packs and handles all computer tasks, while the carburetor does the fuel. The controller comes with 6 pre-set spark curves which will let you run whatever octane fuel you desire in your F-Body. Brackets are included to mount TH350 & 700R4 Detent/Kickdown Cables. Make your LS1 engine an easy retro-fit into any muscle car, street rod or marine application with American-made Edelbrock Performer RPM LS1 intake manifold kits. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 197, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, or 1992 Camaro! Learn More
$865.99 ea.
Camaro Timing Chain Cover, Two-Piece, Aluminum, Edelbrock, 1998-2002 Part # 718910
Two-Piece Aluminum Cover Allows Quick Camshaft Removal Without Removing The Dampener Or Steering Components Natural Aluminum Finish Fits Models With Rear Mounted Camshaft Sensors The Window In The Front Cover Is Sealed With A Plate & O-Ring For Superior Leak Prevention Will Not Work With Double Roller Chains   Rick's Camaros is happy to offer this new two-piece timing chain cover for your 1998, 1999, 2000, 2001, or 2002 Camaro. Manufactured by Edelbrock, their aluminum timing covers are the perfect way to add strength and durability to the front of your engine. Apart from this, they will improve the look of your F-Body Camaro's look as well. These die-cast covers are available in multiple configurations depending on your specific application. This timing chain cover prevents leaks and allows for quick, stress-free camshaft removal. Trust Rick's Camaros for all of your restoration and replacement needs for your 1998, 1999, 2000, 2001, or 2002 Camaro! Learn More

Regular Price: $189.99 ea.

Sale Price: $139.99 ea.

Edelbrock 1970-1981 Camaro EGR Valve Adapter Part # 718782
Clears Carburetor Natural Cast Aluminum Finish Includes Necessary Gaskets & Bolts Use With P/N 718781 Carburetor The EGR valve adapter on your 1970-1981 Camaro controls a small passageway between the intake and exhaust manifolds. To start, EGR stands for exhaust gas recirculation, and is a technique used to recirculate your engine's exhaust gas back to the engine cylinders. Rick's Camaros is happy to partner with Edelbrock to bring you a new EGR valve adapter, to make installing your new intake and carburetor much easier. With this adapter, the existing EGR valve on your F-Body is repositioned to allow clearance for your carburetor. Made from cast aluminum and coming in a set complete with mounting gaskets and bolts, you will have everything you need for a great looking installation. Trust Rick's Camaros for all of your restoration and replacement needs for your 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, or 1981 Camaro! Learn More
$64.99 ea.
7 Item(s) Sort by: Show: per page Grid  |  List
4