Product Experts Available 1-800-359-7717

Filter Your Results

  1. Remove This Item CATEGORY: Fuel Systems
  2. Remove This Item brand: Edelbrock
CATEGORIES
  1. Carburetors (1)
  2. Fuel Pumps and Related (1)
  3. Intake Manifold and Related (2)
PRICE
  1. $50.00 to $59.99 (1)
  2. $400.00 to $499.99 (2)
  3. $500.00 to $599.99 (1)
 

EDELBROCK PARTS & ACCESSORIES

Edelbrock

EDELBROCK TODAY

Edelbrock Corporation has seven locations: four in Torrance and three in San Jacinto, California, totaling over 500,000 square feet. Torrance Headquarters include: R&D; manufacturing; state-of-the-art testing facilities, advertising and tech support.

Less than a mile away are the Russell Plumbing, as well as our Distribution Center and Vic’s Garage. This location also houses the Company’s collection of street rods and classic cars, as well as the company archives containing our extensive collection of historic photos and memorabilia. Our Aluminum Foundries are located close by in San Jacinto. In 2008 we added a new Permanent Mold and Heat Treat facility next to our existing sand cast foundry, which has been called “the most state-of-the-art sand cast foundry west of the Mississippi.” This investment in American facilities is part of our commitment to “Made in USA” products and performance.

INTO THE FUTURE... “Proven Performance” is the philosophy that began with Vic Sr. in 1938 and it continues today with the same high standards of performance and quality. Vic Sr. would be proud of what has grown out of his small garage in Los Angeles, California.

On tap for 2012 is the expansion of the E-Force Supercharger line. Edelbrock is continuing the success of the E-Force systems with new applications for the 2003-11 GM Trucks, 2007-Later Ford Expedition and Lincoln Navigator along with a universal LS3 system for use in street rods and muscle cars. These revolutionary designs deliver instant, reliable and safe horsepower with low boost for minimum stress on the engine. And they fit under the stock hood!

We are also excited to announce the development of our new E-Street universal electronic fuel injection system. The E-Street EFI system is intended as an affordable, easy to use, fuel injection solution that can be installed on any V8 engine, originally equipped with a carburetor. It includes a pre-assembled throttle body, engine control unit (ECU), 7" touch screen tablet, high quality wiring harness, wide band oxygen sensor and instructions for a trouble free installation. This system will make upgrading from a carbureted setup to modern electronic fuel injection simple.

4 Item(s) Sort by: Show: per page Grid  |  List
Edelbrock 1970-1981 Camaro Performance Carburetor, 600 CFM For Cars With EGR Part # 718781
Stock Replacement For Cars With Exhaust Gas Recirculation (EGR) 4 Barrel, Single Fuel Inlet Square Bore Carburetor Flange Silver Finish Great Combo With "Performer" Intake   A new performance carburetor is just what your 1970-1981 Camaro needs for an improved internal combustion engine. Our 600 CFM performance carburetor, manufactured by Edelbrock, outperforms the stock Quadra-Jet and provides better mileage. Also, it accepts the Camaro stock throttle linkage and transmission kick down mechanism. In addition, it has a universal 12-volt electric choke, vacuum/weight operated secondaries, vacuum advance connection, and PCV fitting. This carburetor has a single fuel inlet, which requires a new fuel feed line, but the fuel filter and carburetor gasket are included. It is to be used on Camaros with exhaust gas recirculation (EGR) and small block engine applications. Use on an Edelbrock manifold requires the purchase of the carburetor base plate P/N 718405. Trust Rick's Camaros for all of your restoration and replacement needs for your 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, or 1981 Camaro! Learn More
$409.99 ea.
Edelbrock 1993-1997 Camaro Performer RPM Air-Gap LT1 Intake Manifold Part # 718906
Performance Intake Manifold Excellent Throttle Repsonse Throughout RPM Range (1,500-6,500 Operating Range)  Improved Fuel Economy With Incredible Horsepower Stock Engine Block Style Exhaust Gas Recirculation Technique Included Complete Intake Section Included Natural Aluminum Finish Multi-Port Injection Style A new performer intake manifold could be just the thing you need for your 1993, 1994, 1995, 1996, or 1997 Camaro. It is a proven fact that cooler air makes more power. Edelbrock Performer RPM Air-Gap Manifolds have a raised plenum which separates the intake air from the hot engine coolant passages in the base. Rick's Camaros is proud to work with Edelbrock to bring you a revolution in your F-Body's air intake. Cooler intake air can hold more oxygen, which improves the Air/Fuel ratio. Another advantage is the ability to run slightly more ignition timing without fear of detonation. More timing means more power. The raised design also puts the intake runners at a better angle to the fuel injectors, improving fuel atomization, which in turn increases efficiency and fuel economy. These manifolds accept all factory emissions equipment, brackets, and vacuum hoses. The LT1 manifold P/N 718906 is recommended for lightly modified street/strip applications, while the LT4, P/N 718907 is more suited to cars with aggressive head and cam combinations. Trust Rick's Camaros for all of your restoration and replacement needs for your 1993, 1994, 1995, 1996, or 1997 Camaro!  Learn More

Regular Price: $499.99 ea.

Sale Price: $357.99 ea.

Edelbrock 1970-2002 Camaro Fuel Pump Relay Kit, Universal Part # 729375
Necessary When Installing Electric Fuel Pumps Ensures Proper Wiring To Reduce Fuel Pump Damage 12 V, 30 Amps Single Pole, Spade Terminal Wiring Harness Included Use Kit With Electric Fuel Pump P/N 729374   Edelbrock electric fuel pump relay kits will help to reduce the risk of damaging your 1970-2002 Camaro's fuel pump. The 12 volts relay kits will provide consistent fuel pressure to the regulator or carburetor to eliminate possible engine damage. These Edelbrock fuel pump relay kits also include a wiring harness and single-blade connection for an easy hookup. Don't wait to reduce fuel pump damage on your F-Body. Trust Rick's Camaros for all of your restoration and replacement needs for your 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, or 2002 Camaro! Learn More
$59.99 Kit
Edelbrock 1993-1997 Camaro Performer RPM Air-Gap LT4 Intake Manifold Part # 718907
Performance Intake Manifold Excellent Throttle Repsonse Throughout RPM Range Improved Fuel Economy With Incredible Horsepower Complete Intake Section Included 1,500-6,500 Operating RPM Range Natural Aluminum Finish Red Powdercoated Multi-Port Injection Stock/OEM Standard Engine Block   Rick's Camaros offers this LT4 intake manifold for your 1993, 1994, 1995, 1996, or 1997 Camaro. It is a proven fact that cooler air makes more power. Edelbrock Performer RPM Air-Gap Manifolds have a raised plenum which separates the intake air from the hot engine coolant passages in the base. Cooler intake air can hold more oxygen, which improves the Air/Fuel ratio. Another advantage is the ability to run slightly more ignition timing without fear of detonation. More timing means more power for your F-Body Camaro. The raised design also puts the intake runners at a better angle to the fuel injectors, improving fuel atomization, which in turn increases efficiency and fuel economy in your street car. These manifolds accept all factory emissions equipment, brackets, and vacuum hoses. The LT1 manifold P/N 718906 is recommended for lightly modified street/strip applications, while the LT4, P/N 718907 is more suited to cars with aggressive head and cam combinations. Trust Rick's Camaros for all of your restoration and replacement needs for your 1993, 1994, 1995, 1996, or 1997 Camaro!  Learn More

Was: $592.99 ea.

Now: $542.99 ea.
4 Item(s) Sort by: Show: per page Grid  |  List
3