Product Experts Available 1-800-359-7717

Filter Your Results

  1. Remove This Item brand: Granatelli Motor Sports Inc
 

GRANATELLI MOTOR SPORTS INC PARTS & ACCESSORIES

15 Item(s) Sort by: Show: per page Grid  |  List
Camaro Rear Lower Tubular Control Arms, 1982-2002 Part # 721601
Greatly Reduce Rear Axle Flex Improves Traction By Decreasing Wheel Hop Bolt-On Installation These Granatelli Motor Sports control arms feature 1.65" x .120 wall tubing for superior strength, polyurethane bushings and grease fittings on both ends of the bar and powder coated. Learn More

Was: $197.99 Kit

Now: $159.99 Kit
Camaro Housing, Mass Air Flow, Red, Granatelli, 1994-2002 Part # 718209
Provides Up To 9hp & 7Ft./Lbs. Torque Gain Over 50% Flow Improvement (Stock Meter = 640 CFM/Granatelli = 1050 CFM) Bolt-On Installation One of the quickest ways to gain horsepower on your Camaro is through the air intake system. If you've added a cold air induction system, the only way to realize the full benefit of the system is to remove the restrictive factory mass airflow sensor. By isntalling the 6061-T6 billet aluminum Granatelli unit, you'll not only get the maximum benefit of your tuning improvement: you also get a great look with the chemically polished color. The housing is supplied with all necessary hardware. Not legal for sale or use in California. Learn More

Was: $114.99 ea.

Now: $90.99 ea.
Camaro Intake Kit, Black, 2010-2013 Part # 791013
Increases HP & torque by way of better breathing Deep throaty sound under hard acceleration yet silent at cruise This kit requires no custom tuning works with factory ECM settings Easy Install with hand tools Washable and reusable cone style filter give it the hi-po look Requires less throttle at same speed so mileage increases based on driving habits Learn More

Was: $279.99 Kit

Now: $229.99 Kit
Camaro Valve Covers, V8, LS1, Granatelli, 1999-2002 Part # 718972
Standard Height for LS1 and LS6 Engines Integral Bosses for Mounting Ignition Coils Directly to Cover 6061 CNC Aluminum Factory Style Baffled Breather Front and Rear Bosses for Adding Larger Breather Fittings O-ring Seal to Cylinder Head CNC-Machined Oil Cap with O-ring Seal Supplied with Stainless Mounting Hardware Learn More

Was: $699.99 pr.

Now: $659.99 pr.
Camaro Shock Tower Brace, 6-Cylinder & SS Model, 1993-2002 Part # 754054
Improves Handling By Increasing Chassis Rigidity Bolt-On Installation Learn More
$196.99 ea.
Camaro MaxFlow Modified Mass Air Flow Sensor, Granatelli, 1998-2002 Part # 718212
Increases Air Flow (from 530 to 640CFM) Adds Up To 10hp (Rear Wheel) Bolt-On Installation Recalibrated and fully ported, the max-flow sensor is ideal for those who thirst for more power. Installation instructions included. E.O.# Pending. Learn More

Was: $399.99 ea.

Now: $299.99 ea.
Camaro Spark Plug Wire Set, LS1, Granatelli, 1998-2002 Part # 726566
Adds Up To 15 Rear Wheel Horsepower 0 Ohms Resistance & Computer Safe Increases Power To The Spark Plug Up To 400% Over Stock High Temperature Silicone Boots Resists Temperatures Up To 500 Ideal For Use With Aftermarket Headers Learn More

Was: $149.99 Set

Now: $135.99 Set
Camaro Shock Tower Caps, Satin Finish, 2010-2013 Part # 791016
Add A Custom Touch Under Your Hood Billet Aluminum Made In USA Learn More
$159.99 pr.
Camaro Intake Kit, Satin, 2010-2013 Part # 791015
Increases HP & torque by way of better breathing Deep throaty sound under hard acceleration yet silent at cruise This kit requires no custom tuning works with factory ECM settings Easy Install with hand tools Washable and reusable cone style filter give it the hi-po look Requires less throttle at same speed so mileage increases based on driving habits Learn More

Was: $279.99 Kit

Now: $229.99 Kit
Camaro L99 & LS3 Twin Turbo Kit, V8, 2010-2014 Part # 33-12998
Two PTE6265 Turbochargers With 4 Inlet Compressor Ducting  Each Capable Of 65 Lbs/Min Stainless Steel And Heat Temperature Coated Exhaust System Components Ensure A Lifetime The Kit Does Not Hang Below The Frame Rail To Ensure Plenty Of Ground Clearance Retains Factory Engine Cover GMS Oil Feed & Return Line Are Precision Clamped & Crimped To Enable Leak Free Connections GMS/TTi 3.5 6061 Aluminum Intercooler Tubing For Lighter Weight & Better Heat Dispersion GMS/TTi 4 6061 Aluminum Charge-Pipe Can Be Installed On Stock Engine V8 Sold As A Tuner System Made In The USA This kit is for the 2010-2014 Camaro. The Turbos are V band mounted on inlet and outlet to insure easy rotation, solid mounting and best of all there are no nuts and bolts entering or exit turbo body. It includes a 1 x 50mm Tial Blow Off Valve and the 3 Largest Front Mount Intercooler are Hi flow Bell cores with 3.5 inlets from turbos and a single 4 discharge pipe feeds directly to the throttle body. The Intercooler Tanks are Black Powder Coated to Extract Heat Yet Fins Remain Untouched. All the necessary Vacuum ports required to assist in installing the boost controller. The GMs/TTi 4 Aluminum Intake Tubing w/K&N Filters and K&N Hydro Shields provide extended dust, dirt, water protection and the GMS/TTi Aluminum Lower frame cover is used to ensure debris free road travel. You will see real power gaines from your 2010, 2011, 2012, 2013, 2014 Camaro. Trust Ricks Camaros for all your part needs. Learn More
$12,999.99 Kit

New!

Camaro Intake Kit, Polished, 2010-2013 Part # 791014
Increases HP & torque by way of better breathing Deep throaty sound under hard acceleration yet silent at cruise This kit requires no custom tuning works with factory ECM settings Easy Install with hand tools Washable and reusable cone style filter give it the hi-po look Requires less throttle at same speed so mileage increases based on driving habits Learn More

Was: $329.99 Kit

Now: $249.99 Kit
Camaro Stainless Steel Braided Performance Brake Lines, 2010-2014 Part # 33-13000
Kit Includes Banjo Bolts, Washers, and Insulators Direct stock replacement on all V8 applications Installs with simple hand tools For V6 Camaro's With The Brembo Brake Package Will Work On Stock V8 Made In The USA Rick's Camaro Steel Braided Performance brake lines improves brake system effectiveness and longevity; as compared to an equivalent or stock system on your 2010-2014 Camaro. The stock brake lines on the Camaro, like most O.E. systems, are soft rubber which is subject to pressure spikes and a spongy pedal feeling with aggressive driving and all around fast stopping. Brake with the best on your 2010-2014 Camaro. Trust Rick's Camaro for all your 5th Gen Camaro performance needs. Learn More
$159.99 Kit

New!

Camaro Twin Turbo Kit, LS1, 1988-2002 Part # 33-12999
System Produces 450RWP Installation Requires Only Moderate Mechanical Skills Requires The Turbo 400 Automatic 3-Speed Transmission Sold As A Tuner Kit Made In The USA Rick's Camaro is proud to announce the availability of the Granatelli Twin Turbo system for 1998-2002 LS1 Camaro. The system produces 450RWP @ 7 PSI using 91 California grade octane fuel but is capable of 1,100RWP on a professionally built engine. (Recent testing showed 815 rwhp on a low compression 427 LsX engine using 91 California grade octane fuel at 15 psi) The system features near-ZERO turbo lag, instant tire shredding power, superior fit and finish and all OEM quality. The kit is 100% complete, additional engine modifications recommended after 9 PSI (call for details). The kit includes twin 62/66mm PTE6266 T3/T4 housing Precision turbos, twin 38mm TiAL MVS waste gates, Granatelli/TiAL 50mm compressor bypass valve, stainless steel exhaust components through out the system, powder coated tubing from turbo to intercooler and from intercooler to throttle body as well as a large front mount air to air intercooler core. Installation requires only moderate mechanical skills and can be completed within 12 hours. Trust Rick's Camaro for all your 1998-2002 performance needs. Learn More
$12,999.99 Kit

New!

Camaro 1G Suspension Bracing Package, 2010-2014 Part # 33-13237
Features Easy Installation Fits Both V8 And V6 Camaro Models On A 200 Foot Skidpad, Yielded .984G Clockwise And 1.03G Counterclockwise Made In The USA The 2010, 2011, 2012, 2013, or 2014 Camaro provides a great modification platform to start from, which is why Rick's Camaro provides this 1G Suspension Bracing Kit from Granatelli Motor Sports so you can kick things up a few notches. The 1G suspension kit creates a full frame that greatly increasing handling which reduces chassis flexing & twisting that releases hidden HP. Specially designed for faster response to make your 5th Gen Camaro a corner carver. Learn More
$965.99 Kit

New!

Camaro Control Arm Relocation Brackets, Rear, 1982-2002 Part # 721228
Maintains Proper Suspension Geometry On Lowered Cars Weld-In Installation Required These brackets reposition your instant center by altering your control arm angle for increased traction. They are made from laser cut 3/16" cold rolled steel. Learn More

Was: $127.99 Set

Now: $96.99 Set
15 Item(s) Sort by: Show: per page Grid  |  List
4