Product Experts Available 1-800-359-7717

Filter Your Results

  1. Remove This Item CATEGORY: Performance
  2. Remove This Item brand: Hotchkis Sport Suspension
CATEGORIES
  1. Exterior (2)
  2. Steering (1)
  3. Suspension (48)
PRICE
  1. $60.00 to $249.99 (14)
  2. $250.00 to $399.99 (12)
  3. $400.00 to $599.99 (9)
  4. $600.00 to $1499.99 (7)
  5. $1500.00 to $1999.99 (9)
 

HOTCHKIS SPORT SUSPENSION PARTS & ACCESSORIES

Items: 1 to 28 of 51 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. Next
Grid  |  List
Best Sellers
Camaro Coil Spring Set, Small Block, 2" Drop, Hotchkis, 1967-1969 Part # SS-545
Gray Powder Coated Finish 2" Lowered Front 600 lb/in Spring Rate Will Work For Big Block with Aluminum Heads Lower your Camaro 2" Below stock ride height to give it the right look, with an aggressive stance and a lower center of gravity. Our springs provide a firm, but not harsh ride. Each spring is precision wound using the highest quality steel. Use Rick's for your suspension upgrades. Learn More

Was: $229.99 pr.

Now: $209.99 pr.
Camaro Multi-Leaf Spring Kit, 1-1/2" Drop, Progressive Rate, Hotchkis, 1967-1969 Part # SS-550
Lowers Rear Ride Height 1-1/2" From Stock Enhances Performance Driving With A Progressive Spring Rate Includes Heavy-Duty Shackles & Grade 8 Hardware Dramatically improve the handling capability of your high-performance Camaro with this Hotchkis Sport multi-leaf spring kit. When the going gets tough, the tough get going aptly describes these progressive rate springs since they are equipped with a 3/4 length overload leaf to reduce axle wrap. In addition, Hotchkis Sport springs combine urethane rear bushings with rubber front bushings to provide both performance and a comfortable ride. With heavy-duty hardened shackles, grade 8 hardware and other premium quality components, this kit puts the power to the pavement under the most extreme conditions. Upgrade your Camaro's original mono or multi-leaf suspension to the latest spring technology with this Hotchkis Sport multi-leaf spring kit from Rick's. Learn More
$529.99 Kit
Camaro Tie Rod Adjusting Sleeves, Machined, Hotchkis, 1967-1969 Part # SS-530
Durable Gloss Black Powder Coat 5/8" Thread Enhance Steering Precision Machined tie rod sleeves have wrench flats machined in sleeve. Sleeve is finished in black powder coat. Comes with jam nuts for quick and easy toe adjustments. Learn More

Was: $87.99 pr.

Now: $79.99 pr.
Camaro Subframe Reinforcement Connectors, Coupe, Weld-In & Bolt-On, 1967-1969 Part # SS-594
Bolt In Front, Weld In Rear Gloss Black Powder Coat Controlls Subframe Twist   The Hotchkis Performance sub-frame connectors for 1967-69 F-Body cars were designed to add rigidity to the chassis to improve vehicle performance by reducing chassis flex. Fabricated from 1.5" x 2.5" .120 wall rectangular steel, these MIG welded connectors come powder coated gloss black and include urethane front body mounts. Installation of these connectors does not require modifications or cutting of the floor boards. The rear mount is a weld in, while the front mount is a bolt in with the option to weld. This is a must have finishing touch for any F-Body restoration. Learn More
$369.99 ea.
Camaro Hotchkis / Bilstein HPS 1000 Shock Absorber Set, 1967-1969 Part # 720627
Improves Handling Includes Front & Rear Improve the ride and handling of your muscle car with Hotchkis Sport Suspensionís HPS 1000, vehicle specifically tuned shock absorbers. Manufacturing features Bilsteins deflective disc valve technology in a high pressure mono tube shock body which allows excessive heat to be dissipated quicker than twin tube designs. A separating piston uses nitrogen to pressurize the shock oil, preventing aeration (foaming), which often leads to performance loss or a poor ride. Conveniently bundled in a 4 pack, shocks can be used on stock or lowered cars. Shocks are the hardest working suspension part, donít sacrifice your ride and performance to a inferior product. Learn More
$459.99 Set
Camaro Coil Spring Set, Big Block, 2" Drop, Hotchkis, 1967-1969 Part # SS-540
Gray Powder Coated Finish 2" Lowered Front 600 lb/in Spring Rate Lower your Camaro 2" Below stock ride height to give it the right look, with an aggressive stance and a lower center of gravity. Our springs provide a firm, but not harsh ride. Each spring is precision wound using the highest quality steel. Use Rick's for your suspension upgrades.     Learn More
$209.99 pr.
Camaro Anti-Sway Bar Kit, Front, 1-1/8", Hollow, Hotchkis, 1967-1969 Part # SS-560
Replacement Sway Bar 1 1/8" Hollow Carbon Steel Black Powder Coated Finish Improve cornering by reducing body roll with a set of Hotchkis Performance Sway Bars. Hotchkis bars are CNC bent for a precise fit and feature lightweight hollow construction and include greasable polyurethane bushings, end links, brackets, and all necessary hardware. Hotchkis Camaro sway bars are powder coated for durability, and tested and tuned to ensure the best performance possible. Learn More

Was: $274.99 Kit

Now: $249.99 Kit
Camaro Hotchkis HPS 1000 Shocks Front, 1967-1969 Part # SS-209
Replacement Performance Front Shock Extended Length 356mm Collapsed Length 224mm The HPS 1000 shock is designed like all other Hotchkis Performance parts, it's designed to perform. Shocks need to be tuned with spring rates and vehicle weights in mind, that's why one valve fit's all or universal shocks just don't optimize performance often sacrificing ride comfort for performance. Tuned in house and manufactured by Bilstein TM this shock offers a seamless transition between comfort and control. Each shock is specifically engineered and tuned to offer the ultimate performance and ride. HPS 1000 shocks make a great addition to the Hotchkis TVS packages. Shocks are sold each. Learn More
$109.99 ea.
Camaro X Brace, Convertible, Hotchkis, 1967-1969 Part # SS-570
Black Powder Coated Finish Stainless Steel Mounting Hardware Much More Rigid Than Stock Brace The Hotchkis Performance X brace from Rickís First Generation for 1967-69 F-Body cars was designed to add rigidity to the chassis by replacing the factory frame brace. As an added benefit this brace allows for the use of larger tube exhaust systems, which often requires removal of the factory brace. Fabricated from 10 gauge steel, this brace features extra reinforcing gussets, laser cut Hotchkis logo, powder coated gloss black finish and stainless mounting hardware. This is the perfect finishing touch for any Camaro Convertible restoration. Learn More

Was: $239.99 ea.

Now: $189.99 ea.
Camaro Subframe Reinforcement Connectors, Convertible, Weld-In & Bolt-On, 1967-1969 Part # SS-595
Bolt In Front, Weld In Rear Gloss Black Powder Coat Controls Subframe Twist The Hotchkis Performance sub-frame connectors for 1967-69 F-Body cars were designed to add rigidity to the chassis to improve vehicle performance by reducing chassis flex. Fabricated from 1.5" x 2.5" .120 wall rectangular steel, these MIG welded connectors come powder coated gloss black and include urethane front body mounts. Installation of these connectors does not require modifications or cutting of the floor boards. The rear mount is a weld in, while the front mount is a bolt in with the option to weld. This is a must have finishing touch for any Convertible restoration. Learn More
$399.99 ea.
Camaro Anti-Sway Bar Kit, Rear, 7/8", Hollow, Hotchkis, 1967-1969 Part # SS-565
7/8" Hollow Rear Sway Bar Includes Chassis Max Rear Brace Black Powder Coated Finish Urethane Bushings Grade 8 Hardware Improve cornering by reducing body roll with a Hotchkis Performance Sway Bar. Hotchkis bars are CNC bent for a precise fit and feature lightweight hollow construction and include greasable polyurethane bushings, end links, fabricated rear links, stainless u-bolts, brackets, and all necessary hardware. Hotchkis bars are powder coated for durability, and tested and tuned to ensure the best performance possible. NOTE: The Chassis Max Bar ties the rear frame rails together to allow for greater chassis rigidity during cornering and provides optimum rear sway bar angle and connecting points for greater control. Learn More
$599.99 ea.
Camaro Subframe Connectors, Hotchkis Sport Suspension, 1970-1973 Part # 721827
Rigidly Connects The Front Subframe To Rear Chassis Frame Rail Reducing Chassis Flex Does Not Require Cutting Or Modifying Of Floor Tucked-In Design Provides Excellent Ground Clearance Powder Coated Gloss Black The Hotchkis Performance sub-frame connectors for 1970-73 F-Body cars are designed to add rigidity to the chassis to improve vehicle performance by reducing chassis flex. Fabricated from 1.5" x 3" .120 wall rectangular steel, these TIG welded connectors are powder coated gloss black. Installation of these connectors does not require modifications or cutting of the floor boards. The rear mount is a weld in, while the front mount is a bolt in with the option to weld. This is a must have finishing touch for any F-Body restoration. Learn More
$399.99 pr.
Camaro Suspension Cross Brace & Subframe Connector Kit, Convertible, Chassis Max, Sport, Hotchkis, 1967-1969 Part # SS-571
TIG Welded Powder Coated Gloss Black Finish Helps Eliminate Convertible Body Flex High-power engines and sticky tires often make first generation Camaroīs and Firebirds drop tops twist under pressure. The Hotchkis Sport Suspension Chassis Max System from Rickís First Generation for 1967-69 F-Body Convertibles strengthens the chassis by adding structural integrity that drastically improves handling. Chassis Max exclusive cross brace and subframe connectors attach easily to the leaf spring pickup points, making your F-body rock solid. Hotchkis designed the system to work with up to 3-inch diameter dual exhaust. The superior multi-piece design contours around the undercarriage, maintaining ground clearance and a clean look. All three components in the Chassis Max System are CAD designed and manufactured in the USA using precision CNC machines. A durable gloss black powdercoat finish means the parts won't chip or crack, and all necessary polyurethane subframe mount bushings and hardware is included. Learn More
$599.99 Kit
Camaro Hotchkis / Bilstein HPS 1000 Shock Absorber Set, 1970-1976 Part # 720628
Improves Handling Includes Front & Rear Improve the ride and handling of your muscle car with Hotchkis Sport Suspensionís HPS 1000, vehicle specifically tuned shock absorbers. Manufacturing features Bilsteins deflective disc valve technology in a high pressure mono tube shock body which allows excessive heat to be dissipated quicker than twin tube designs. A separating piston uses nitrogen to pressurize the shock oil, preventing aeration (foaming), which often leads to performance loss or a poor ride. Conveniently bundled in a 4 pack, shocks can be used on stock or lowered cars. Shocks are the hardest working suspension part, donít sacrifice your ride and performance to a inferior product. Learn More
$459.99 Set
Camaro Total Vehicle System, (TVS) Small Block, Hotchkis, 1970-1981 Part # 721066
Dramatically Improves Traction & Handling Without Compromising Ride Quality Fits Factory Big Block Camaros From 1970-1972 And Conversion Up To 1981 Engineered Exclusively For Camaros With Guaranteed Results Lower's Car 2" In Front, 1-1/2" In Rear For All Small Block Applications & Big Blocks With Aluminum Heads & Intake Manifold Bolt-On Installation Complete Instructions Included A Hotchkis Performance TVS Kit is horsepower for your suspension. With performance engineered front and rear Sport Springs, front and rear Sport Sway Bars and heavy-duty tie rod sleeves that will give you instantaneous cornering power plus you'll get unbelievable bite to launch your Camaro like a rock out of a sling shot! The whole kit is a bolt-on operation so there's no need to modify anything on your car. Get one for your Camaro today!   Kit Includes:    Sport Coil & Leaf Springs    Sport Sway Bars    Heavy-Duty Tie Rod Sleeves    Hardware Learn More
$1,489.99 Kit
Camaro Subframe Connectors, Hotchkis Sport Suspension, 1974-1981 Part # 721902
Powder Coated Gloss Black Finish TIG Welded Fabricated from 1.5" x 3" .120 wall rectangular steel. Does not require cutting or modifying the floor. Front is optional weld or bolt-on. Allows for front subframe removal if needed. Reduced chassis flex. Tucked-in design gives excellent ground clearance. The Hotchkis Performance sub-frame connectors for 74-81 F-Body cars are designed to add rigidity to the chassis to improve vehicle performance by reducing chassis flex. Fabricated from 1.5" x 3" .120 wall rectangular steel, these TIG welded connectors are powder coated gloss black. Installation of these connectors does not require modifications or cutting of the floor boards. The rear mount is a weld in, while the front mount is a bolt in with the option to weld. This is a must have finishing touch for any Camaro restoration. Learn More
$399.99 Set
Camaro Tubular Upper Control Arm Kit, Hotchkis, 1967-1969 Part # SS-534
100% TIG Welded 1.25" Tubular Steel Construction Silver Zinc Plated, 4130 Chromoly Offset Billet Cross-shaft Upper Ball Joints & Polyurethane Droop Stops Installed Gloss Black Powder Coat Finish Billet Aluminum Offset & Stock Dimension Caster Inserts Install the Hotchkis Tubular Upper A-Arms on your 67-69 Camaro or Firebird and gain vastly increased handling and control. These TIG welded; bolt-on arms offer increased camber and caster adjustment over stock, for ultimate performance. Smooth operating Delrin bushings allow the Arms to move through their travel easily. Finished in gloss black powder coat, the Arms are ready to install and are complete with ball joints, offset cross-shafts, offset caster inserts, Delrin bushings and droop stops.Exceptional handling performance when combined with the Hotchkis Performance Tubular Camaro Upper A-Arms from Rick's. Learn More

Was: $712.99 pr.

Now: $669.99 pr.
Camaro Hotchkis HPS 1000 Shocks Rear, 1967-1969 Part # SS-208
Replacement Performance Rear Shock Collapsed Length 297mm Extended Length 474 mm The HPS 1000 shock is designed like all other Hotchkis Performance parts, it's designed to perform. Shocks need to be tuned with spring rates and vehicle weights in mind, that's why one valve fit's all or universal shocks just don't optimize performance often sacrificing ride comfort for performance. Tuned in house and manufactured by Bilstein TM this shock offers a seamless transition between comfort and control. Each shock is specifically engineered and tuned to offer the ultimate performance and ride. HPS 1000 shocks make a great addition to the Hotchkis TVS packages. Shocks are sold each. Learn More
$129.99 ea.
Camaro Shock Tower Brace, Rear, 1968-1969 Part # SS-532
Powder Coated, Anthracite Finish Fabricated from 1.5Ē steel tubing, TIG welded to precision CNC bent brackets Bolt In Design Rigidly Connects Rear Shock Towers Dramatically Reduces Chassis Flex During Hard Cornering & Acceleration The Hotchkis Sport Suspension Rear Shock Tower Brace for 1968-69 Camaro cars ties together the chassis for added rigidity and improved vehicle performance by reducing flex. A must for any vehicle looking to reduce chassis flex for road racing, auto crossing, or spirited driving. Also makes a great upgrade on convertibles to help reduce chassis flex. The brace is fabricated from 1.5Ē steel tubing, and is powder anthracite. This easy to install kit is a must for any high-performance classic Camaro Learn More
$169.99 ea.
Camaro Hotchkis / Bilstein HPS 1000 Shock Absorber Set, 1977-1981 Part # 720629
Improves Handling Includes Front & Rear Improve the ride and handling of your muscle car with Hotchkis Sport Suspensionís HPS 1000, vehicle specifically tuned shock absorbers. Manufacturing features Bilsteins deflective disc valve technology in a high pressure mono tube shock body which allows excessive heat to be dissipated quicker than twin tube designs. A separating piston uses nitrogen to pressurize the shock oil, preventing aeration (foaming), which often leads to performance loss or a poor ride. Conveniently bundled in a 4 pack, shocks can be used on stock or lowered cars. Shocks are the hardest working suspension part, donít sacrifice your ride and performance to a inferior product. Learn More
$499.99 Set
Camaro Coil Springs, Small Block, Front, Lowering, Hotchkis,1970-1981 Part # 721508
Lowers Car 2" Below Stock Ride Height Provides A Firm, But Not Harsh Ride Gray Powder Coated Give your Camaro a hi-tech look and an agressive stance by adding these high quality Hotchkis lowering springs. Learn More
$249.99 pr.
Camaro Hood Pin Kit, Universal, Billet, Hotchkis, 1967-2014 Part # HD-58
Universal Fit Some Contoured Hoods May Not Be Able To Mount. Replace those old, rusty chrome hood pins on your Camaro with a pair of Ultra Trick, CNC Machined Aluminum Hood Pins from Hotchkis Sport Suspension. The Hard Annodized Finish gives a Hi Tech look to your car. The kit comes complete with Aluminum Pin, Stainless Hardware, Hood Pin Plates, and a Trick Aluminum Quick Release Pin. The Universal design makes it a great update for any Camaro. Learn More
$199.99 Kit
Camaro Coil Spring Set, Small Block, 3" Drop, Hotchkis, 1967-1969 Part # SS-546
Gray Powder Coated Finish 3" Lowered Front 600 lb/in Spring Rate Will Work For Big Block with Aluminum Heads Lower your Camaro 3" Below stock ride height to give it the right look, with an aggressive stance and a lower center of gravity. Our springs provide a firm, but not harsh ride. Each spring is precision wound using the highest quality steel. Use Rick's for your suspension upgrades. Learn More
$209.99 pr.
Camaro, Chassis Max Handle Bars, Hotchkis, 1970-1981 Part # 721950
Powder Coated, Anthracite Finish Easy, Bolt In Installation Fabricated From 1.5" Steel Tubing, TIG Welded To Precision CNC Bent Brackets CAD Designed For Superior Fit & Finish Manufactured In The USA Works With Most Suspension Systems And Engine Swaps Chassis Max Handle Bars from Hotchkis are a critical component for any high-performance 1970-81 Camaro. The second generation F-Body subframe can flex during hard cornering, altering suspension geometry, tire contact patch and alignment. Hotchkis has solved this problem by applying nature's strongest shape: the triangle. Handle Bars tie the control arms to the cowl and firewall with high-strength tubing and CNC bent brackets for maximum strength and rigidity. The result is incredible handling and driver control that makes the most of your high performance Camaro suspension. NOTE: Tubular upper control arms are highly recommended as there have been some issues with the Handle Bars fitting with stock upper control arms. Chassis Max Handle Bars will not work with Pontiac Firebirds. Learn More
$279.99 Set
Camaro Anti-Sway Bar, Rear, Adjustable 15/16", Hotchkis, 1993-2002 Part # 721906
Durable, Gloss Black Powder Coat Finish Bolt-In installation requires no vehicle modifications Contains all necessary mounting and links Includes Greasable Polyurethane Bushings, and Mounts Now you can fine tune the handling of your 1993-2002 Camaro with the new bolt-in Hotchkis Adjustable Rear Sway Bar. Three adjustment settings Ė 225, 240 and 255 lbs/in can be selected by simply moving the included heavy duty end links into the desired adjustment hole at thend of the 15/16Ē tubular steel sway bar. The result is maximum adjustability, control and driver feedback with the ability to dial-in the way the car responds to throttle steer and how it reacts to driver input. Mounts, greasable Polyurethane bushings and complete installation instructions are included. Learn More

Was: $389.99 Set

Now: $349.99 Set
Camaro Chassis Max Handle Bars, Hotchkis, 1967-1969 Part # SS-535
Fabricated From 1.5" Steel Tubing TIG Welded To Precision CNC Bent Brackets Adjustable Crossbar Works With Most Suspension Systems and Engine Installations Powder Coated, Anthracite Finish Triangulation Brace Ties Control Arms, Shock Towers & Firewall Together Prevents Changes In Geometry, Alignment & Tire Contact Patch During High G-Cornering Will Not Work With LS Conversions Chassis Max Handle Bars from Hotchkis are a critical component for any high-performance 1967-1969 Camaro. First generation F-bodies use a subframe that can flex during hard cornering, altering suspension geometry and even alignment. Hotchkis has solved this problem by applying nature's strongest shape: the triangle. Handle Bars tie the control arms to each other and the firewall with high-strength tubing, CNC bent brackets and laser cut gussets for maximum strength and rigidity. The result is incredible handling and driver control that makes the most of your high performance suspension. Depend on Rick's for your suspension upgrade. Learn More
$559.99 Set
Camaro Coil Spring Set, Hotchkis, 1982-1992 Part # 721804
Replacement Performance Spring Set (4) Lowers Car 1" Below Stock Ride Height Powder Coated Dark Gray Learn More
$399.99 Set
Camaro Coil Spring Set, Hotchkis, 1993-2002 Part # 721803
Replacement Performance Spring Set (4) Lowers Car 1" Below Stock Ride Height Powder Coated Dark Gray Learn More

Was: $349.99 Set

Now: $329.99 Set
Items: 1 to 28 of 51 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. Next
Grid  |  List
4