Product Experts Available 1-800-359-7717

Filter Your Results

 

STREET LEGAL PERFORMANCE SLP PARTS & ACCESSORIES

Items: 1 to 28 of 35 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. Next
Grid  |  List
Best Sellers
Camaro Intake Air Box Lid, LS1, SLP, 2000-2002 Part # 718408
Adds Up To 10 Rear Wheel Horsepower Improves Air Flow To Throttle Body By Eliminating Restrictive Stock Baffles Bolt-On Lid Learn More
$99.99 ea.
Camaro Grille, SS, With Red Trim, SLP, 1998-2002 Part # 702215
SS Grille Assembly  Injection Molded Plastic Replacement Original Equipment Instructions Included ??  Looking to enhance the front end of your Camaro? This 1998, 1999, 2000, 2001, 2002 Camaro SS Grille with red trim will automatically boost your Camaro's appearance. While making your Camaro more noticeable on the road, this injection molded plastic replacement grille protects your radiator and engine by improving air intake and acting as a shield against road waste. Replace your standard grille with this easy to install, direct replacement grille today! Trust Rick's Camaros for all of your 1998, 1999, 2000, 2001, 2002 Camaro restoration and replacement needs. Learn More
$279.99 ea.
Camaro Cooling Fan Switch, 1993-2002 Part # 725099
Allows Cooling Fans To Be Turned On Manually Cooler Operating Temperatures Produce More Horsepower Plug-In Installation Hardware & Instructions Included By adding this simple switch, it allows you to manually operate the cooling fans at any time to optimize the performance of your Camaro. Lowering your operating temperature will not only increase performance, it adds longer engine life. Learn More
$99.99 ea.
Camaro Throttle Body To Air Intake Bellows, LS1, 1998-2002 Part # 718409
Increases Engine Horsepower Simple Installation Replaces Stock Bellows Installing this smooth bellows adds up to 6 horsepower because the factory accordian style bellows is very restrictive. It is constructed of high quality, fiberglass reinforced silicone & smooths out the incoming air for uninterrupted flow. Learn More
$99.99 ea.
Camaro Thermostat, 160°, With Housing, SLP, 1998-2002 Part # 718825
Reduces Engine Temperature By 14° Improves Performance Built In By-Pass Learn More
$74.99 ea.
Camaro Shocks & Struts, Bilstein, SLP, 1993-2002 Part # 721761
The Ultimate Non-Adjustable Dual-Purpose Shock Ideal For Daily Use Or Ocassional Track Time Includes Two Front Struts & Two Rear Shocks These shocks are built to SLP's specifications by Bilstein and are for use in road racing applications. They give excellent control for daily driving and provide a competitive edge on the road course. The shocks are valved to produce a comfortable, yet firm ride on the street. They also perform like a race shock during road course maneuvers. The ultimate in a non adjustable dual-purpose shock. Learn More
$599.99 Set
Camaro Intake Runners, High Flow, 1985-1988 Part # 791246
These intake runners have optimum runner volume and divider lengths to maximize airflow, and produce up to 20 additional horsepower over the stock runners depending on the application. They are cast from OE-quality, aircraft grade aluminum and precision machined for a perfect fit. These runners are an easy bolt-on upgrade for the 5.0L or 5.7L engine in 1985-1988 Camaro. No additional modifications are necessary. All necessary hardware and gaskets for proper installation are included along with complete instructions. They are legal for street use in all 50 states. Learn More
$359.99 Set
Camaro SLP Cold Air Intake, V8, 1994-1997 Part # 791245
Includes Intake Tube and Filters By picking up cool, dense outside air and pumping it directly into the engine these systems are proven to make up to 20 additional horsepower, depending on application. Each kit includes custom designed air boxes and ductwork, air filters and all the necessary parts for easy bolt on application. Complete installation instructions are also included. These kits are legal for street use in all 50 states. Learn More
$289.99 ea.
Camaro SLP Loud Mouth II,3.5", Slash Cut Tips, 1998-2002 Part # 724466
Zero Flow Restriction & The Meanest Sound Around Can Be Quickly Reconfigured To Fit Sound-Quality Requirements Built To OEM Standards To Ensure Proper Fit Constructed Entirely From Mandrel-Bent Stainless Steel Included All Installation Hardware Learn More
$519.99 ea.
Camaro Coil Springs, Eibach, 1993-2002 Part # 721765
Provides Excellent Handling & Control Will Lower Vehicle 1" From Stock Ride Height Provides A Firm Stable Base For Aggressive Street Or Road Course Driving  SLP wanted a set of springs to keep the F-body at a reasonable height, and still have good corner carving charateristics. Eibach answered the call and their collaboration resulted in the best all around spring set for 93-02 Cars. If you would like to go lower, please see P/N 721953. Learn More
$359.99 Set
Camaro Grille, SS, With Silver Trim, SLP, 1998-2002 Part # 702216
SS Grille Assembly  Injection Molded Plastic Replacement Original Equipment Instructions Included Looking to enhance the front end of your Camaro?  This 1998, 1999, 2000, 2001, 2002 Camaro SS Grille with silver trim will automatically boost your Camaro's appearance. While making your Camaro more noticeable on the road, this injection molded plastic replacement grille protects your radiator and engine by improving air intake and acting as a shield against road waste. Replace your standard grille with this easy to install, direct replacement grille today! Trust Rick's Camaros for all of your 1998, 1999, 2000, 2001, 2002 Camaro restoration and replacement needs. Learn More
$297.99 ea.
Camaro Intake Runners, High Flow, 1989-1992 Part # 791247
These intake runners have optimum runner volume and divider lengths to maximize airflow, and produce up to 20 additional horsepower over the stock runners depending on the application. They are cast from OE-quality, aircraft grade aluminum and precision machined for a perfect fit. These runners are an easy bolt-on upgrade for the 5.0L or 5.7L engine in 1989-1992 Camaro. No additional modifications are necessary. All necessary hardware and gaskets for proper installation are included along with complete instructions. They are legal for street use in all 50 states. Learn More
$359.99 Set
Camaro Header Kit, LS1, Long Tube, Ceramic Coated, SLP, 2000 Part # 724475
Fits LS Family Engines Provides Up To 11hp & 10 Ft./Lbs. Torque 409 Stainless Steel Construction With Jet Hot Coating Bolt-On Installation, Includes All Installation Hardware Includes Stainless Steel 3" Diameter Slip-Fit Y-Pipe & High Flow Merge Collectors 1-3/4" Primary Tubes & 3" Collectors 2" More Ground Clearance Than Any Other Long Tube Will Not Fit Convertibles With Automatic Transmission Do you want to reduce your E.T.'s by up to 2 tenths of a second? Bolt on a set of these SLP free-flowing headers and you'll be on your way to faster E.T.'s. They will clear all sub-frame connectors and can be used with all factory accessories. With SLP's drop-in design, there is no need to move the motor or transmission as in other long tube installations. The new revised design follows the contours of the floorpan closer than any other long tube headers available. With 409 stainless steel construction and Jet Hot coating inside and out, engine heat is sent downstream, no need to worry about hot floors. This kit includes 200 cell/inch high flow 3" stainless steel catalytic converters, O2 sensor extension wiring harnesses, 4 stainless band clamps, manifold gaskets and A.I.R. tube gaskets. Learn More
$1,599.99 Kit
Camaro SLP Rocker Arm Kit, 1.85 Ratio, 1998-2002 Part # 33-00242
Fits LS1 SLP is proud to re-release our 1.85-ratio rocker arm package for GM Gen III engines which includes LS1, LS6, LS2 as well as 4.8, 5.3 and 6.0 liter truck engines. Designed as a true bolt-on replacement, these new rockers require NO valve cover or cylinder head modifications. This exclusive design is based off of the stock rocker providing an OEM quality steel construction and a roller bearing trunion which results in a 10% increase in valve lift over the stock 1.7 ratio rocker arms and gains of up to 12 horsepower over stock. This package includes 16 rocker arms, detailed instructions and all required installation hardware. Learn More
$599.99 Set
Camaro Header Kit, LS1, Long Tube, Ceramic Coated, SLP, 1998-1999 Part # 724474
Fits LS Family Engines Provides Up To 11hp & 10 Ft./Lbs. Torque 409 Stainless Steel Construction With Jet Hot Coating Bolt-On Installation, Includes All Installation Hardware Includes Stainless Steel 3" Diameter Slip-Fit Y-Pipe & High Flow Merge Collectors 1-3/4" Primary Tubes & 3" Collectors 2" More Ground Clearance Than Any Other Long Tube Will Not Fit Convertibles With Automatic Transmission Do you want to reduce your E.T.'s by up to 2 tenths of a second? Bolt on a set of these SLP free-flowing headers and you'll be on your way to faster E.T.'s. They will clear all sub-frame connectors and can be used with all factory accessories. With SLP's drop-in design, there is no need to move the motor or transmission as in other long tube installations. The new revised design follows the contours of the floorpan closer than any other long tube headers available. With 409 stainless steel construction and Jet Hot coating inside and out, engine heat is sent downstream, no need to worry about hot floors. This kit includes 200 cell/inch high flow 3" stainless steel catalytic converters, O2 sensor extension wiring harnesses, 4 stainless band clamps, manifold gaskets and A.I.R. tube gaskets. Learn More
$1,599.99 Kit
Camaro Cold Air Intake, V8, Blackwing, Complete, 2010-2013 Part # 791244
Includes Upper and Lower Intake Tubes, Filter, and Washer Resevoir This new Blackwing system was designed from the ground-up to maximize air-flow, lower intake air temperatures and produce substantial horsepower and torque gains by incorporating many design features not found in typical cold-air kits. All SLP Blackwing systems are designed in 3D CAD (Computer Aided Design), enabling SLP to run CFD (Computational Fluid Dynamic) analysis optimizing the design. Once established in CAD, we flow bench, dyno and road test prior to releasing the final cold air system. Each induction system includes a high-flow OEM quality, black-finished polypropylene upper intake tube with a raised SLP Blackwing logo, an integrated MAF housing tube, and a new lower intake tube. This connects to a new high-flow reusable SLP Blackwing air-filter replacing the restrictive, power robbing factory assembly. This setup increases the flow rate of air providing up to a 15 horsepower gain. Includes a unique SLP washer fluid reservoir which holds just under a gallon of fluid. All necessary hardware and detailed installation instructions included. Learn More
$439.99 ea.
Camaro Cold Air Intake, V8, Blackwing, With TVS2300 Supercharger 2010-2013 Part # 791243
Includes Tube and Filter Each package includes a new high-flow, drop-in, reusable Blackwing air-filter and an OEM quality black-finished polypropylene high-flow air-intake tube with a raised SLP Blackwing logo providing up to a 10 horsepower gain. All necessary hardware and detailed installation instructions included. Learn More
$209.99 ea.
Camaro Modular Resonator & Muffler Loud Mouth II, 1998-2002 Part # 724468
Get maximum flexibility from your modular SLP cat-back system with our new Loud Mouth II® bullet race muffler. It offers flow and performance similar to that of our original Loud Mouth® resonator but features a ceramic-wrapped, perforated core that reduces high-frequency noise and in-car resonance. Each Loud Mouth II® muffler is constructed from hand-polished stainless steel and embossed with the classic SLP logo. MEASUREMENTS: 3" ID/OD 4" body diameter 18-1/4" overall length   Learn More
$124.99 ea.
Camaro Air Filter Cleaning and Oil Kit, Blackwing Part # 791239
In order to properly clean and oil your Blackwing filter you should use this kit. This cleaning kit is designed specifically for the special synthetic media in the Blackwing filters (most others use ordinary cotton fiber). Maintaining your filter properly will give you maximum filtration and life. Learn More
$25.99 Kit
Camaro Cold Air Intake, V8, Blackwing, 2010-2013 Part # 791242
Includes Tube and Filter Each package includes a new high-flow, drop-in, reusable Blackwing air-filter and an OEM quality black-finished polypropylene high-flow air-intake tube with a raised SLP Blackwing logo providing up to a 10 horsepower gain. All necessary hardware and detailed installation instructions included. Learn More
$209.99 ea.
$99.99 ea.
Camaro Shift Knob, Leather, SLP, 2010-2013 Part # 791238
SLP's Leather-Wrapped Shift Knob designed for the 2010-12 Camaro helps provide a more positive feel while shifting in and out of gear. The SLP knob will work with the stock shifter or short-throw shifter assembly. Learn More
$119.99 ea.
Camaro Cold Air Intake, V6, Blackwing, 2010-2013 Part # 791241
Includes Tube and Filter Each package includes a new high-flow, drop-in, reusable Blackwing air-filter and an OEM quality black-finished polypropylene high-flow air-intake tube with a raised SLP Blackwing logo providing up to a 10 horsepower gain. All necessary hardware and detailed installation instructions included. Learn More
$209.99 ea.
Camaro SLP Shift Assembly, Short Throw, 2010-2013 Part # 791237
Short-Throw Assembly for the 2010-12 Camaro provides a 20% reduction in throw and a more positive feel while shifting in and out of gear. The shifter will allow the use of the stock shifter knob or leather covered shifter knob and is machined from one solid piece of billet 303 Stainless Steel. New K-Prene bushings and detailed installation instructions are included. Learn More
$129.99 ea.
Camaro SLP, Loud Mouth II Dual Tips, 1998-2002 Part # 724465
SLP's F-Body cat-backs have always been the best performing exhaust systems in the business. Now they're the most versatile, too! Using our industry-exclusive modular design architecture, we've developed a line of systems that can be quickly reconfigured to fit changing performance, noise level, and sound quality requirements. Simply loosen a few band clamps, swap muffler types, retighten, and you're done. No other exhaust offers this level of performance and adaptability! Along with the included race muffler, the F-Body Loud Mouth II® system is compatible with our original Loud Mouth® resonator (#31066). Get both for complete control over your car's sound and performance characteristics. NOTE: Includes a Loud Mouth II® race muffler. Loud Mouth®resonator sold separately. FEATURES: Includes a Loud Mouth II® bullet-type race muffler for minimal restriction, reduced resonance, and an aggressive tone Employs SLP's exclusive modular technology, making it possible to switch between muffler and resonator types in a matter of minutes Lighter than the OEM exhaust assembly Constructed entirely from mandrel-bent stainless steel Features a show quality polished resonator and 2.5" "Dual/Dual" tips Includes pre-welded hangers, detailed instructions, and all necessary installation hardware Covered by SLP's Performance Guarantee and Limited Lifetime Warranty Learn More
$519.99 ea.
Camaro Brake Control Package, V8, 2010-2013 Part # 791236
This BRAKE CONTROL PACKAGE is designed to fit all 2010-12 V8 Camaro's and is developed as a "true bolt-on" package, no custom fabrication, no wire harness nightmare and no hardware store runs, no other kit offers this ease of installation and convenience period !!! This kit is custom fitted for the Camaro chassis and is fully compatible with the factory anti-lock braking and traction-control systems. Each package includes a waterproof electrical solenoid, an activation switch, and complete plug-in harness, CNC-bent steel lines with correct OEM compatible fittings, necessary mounting hardware, and detailed installation instructions. Here's how it works; press the brake pedal and flip the brake-control solenoid switch. Remove your foot from the pedal, and the solenoid maintains line pressure to the front brakes until the switch is released. This makes it easy to heat the rear tires while minimizing wear and tear on your car's rear brake components. You can also use the system to prevent a manual-trans car from rolling out of the staging beams at the starting line. NOTE: Designed for racing only and requires bleeding of brake lines. Learn More
$299.99 ea.
Camaro SLP Loud Mouth II 3.5 Exhaust System, Slash Tips, 1998-2002 Part # 724464
Zero Flow Restriction & The Meanest Sound Around Can Be Quickly Reconfigured To Fit Sound-Quality Requirements Built To OEM Standards To Ensure Proper Fit Constructed Entirely From Mandrel-Bent Stainless Steel Included All Installation Hardware Learn More
$429.99 ea.
Items: 1 to 28 of 35 Sort by: Show: per page Page:
  1. 1
  2. 2
  3. Next
Grid  |  List
4