Skip to Main Content »

1-800-359-7717

Camaro Misc. Engine Parts

0  Items Total: $0.00 View Cart Checkout

Facebook and Twitter

Follow Rick's Camaros Facebook  Follow Eckler's on Twitter  FollowRick's on Facebook and Twitter

 

You're currently on:

CAMARO MISC. ENGINE PARTS FOR 'ALL YEARS AND MODELS'

Items 1 to 28 of 42 total Page:
  1. 1
  2. 2
  3. Next
Show per page
View as: Grid  List  Sort by
Best Sellers
Camaro Hood Safety Latch & Mounting Hardware, Chrome, 1967-1981 Part # C-9473
Original Style Reproduction Triple Chrome Plated Includes Upper Lock Pate, Pilot Bolt, Pop-Up Spring Retainer (4) Chrome Hex Head Bolts with Washers Your hood safety latch on your 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, or 1981 Camaro is what bolts to the bottom of the hood and keeps it closed. If this were to rust or come undone, it is possible that your Camaro's hood could get loose and open while driving. This is a safety hazard, as well as chance of looking silly on the road. Rick's Camaros offers a nice chrome reproduction of the upper hood safety latch which bolts to the bottom of the Camaro hood. When the hood closes, the pilot bolt is caught by the hood opening mechanism and the hook on the mechanism catches the safety latch just in case the hood opening mechanism fails on your Camaro. This safety latch and mounting hardware set is triple chrome plated and includes the upper lock plate, pilot bolt, and pop-up spring retainer, with four chrome hex head bolts with washers. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, or 1981 Camaro!  WARNING: There are two nuts which hold the pilot bolt to the lock plate. Please make sure there is one nut on one side of the lock plate and one nut on the other side. This jams the pilot bolt, keeps it from backing out and reinforces the plate. Failure to check this may result in part failure at highway speed which could cause the hood to fly up.    Learn More
$19.99 ea.

Add to Wishlist

Camaro Vacuum Hose, White Stripe, 1967-1969 Part # RC-40
Correct Reproduction of Original Ribbed with White Stripe Used on many Vacuum Applications Sold per Foot Correct reproduction of the vacuum hose used on Camaros and other Chevrolet applications. This vacuum hose with the white stripe can be found on places like the Air Conditioning, vacuum advance, vacuum modulator and smog (A.I.R.) system. If your engine is running a little rough, it could very well be a cracked or broken vacuum hose. Replace your old hose with brand new correct hose from Rick's First Generation and keep your Camaro show ready and running great.   NOTE: Order as many feet as your Camaro needs and we will cut one long piece so you can cut precise pieces for your applications.   Learn More
$1.99 ea.

Add to Wishlist

Camaro Flywheel Dust Cover, TH350 or TH400, 1967-1981 Part # 33-10354
Reproduction Flywheel Dust Cover Plate Black Painted Steel Fits TH-350 & TH-400 Automatic  Transmissions Fits 1967-1981 Camaro Models Whether you are hearing unwanted rattling vibrations from your transmission, or you're starting to experience clutch failure, chances are that you are in great need of a new flywheel bellhousing dust cover plate for your 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, or 1981 Camaro with TH350 or TH400 Automatic Transmission. Without a dust cover inspection plate or with one that is very worn down, your ring gear is exposed to constant dirt and road debris. Over time, debris and other objects can clog up your flywheel and clutch area, causing premature clutch failure. Clutch failure in your automatic F-Body can be reported from a feeling of your engine racing without your vehicle moving faster, most commonly during gear shifting. This can be confirmed through dark transmission fluid that appears burned. Further strain against your flywheel can lead to accelerated failure, putting you in a dangerous situation. Rick's Camaros offers this flywheel bellhousing dust inspection cover plate, made from stamped steel with a black glossy finish. This reproduction metal plate attaches to the bellhousing and promises to protect the flywheel and clutch from any future road debris. This dust shield will also keep outside debris away from your ring gear and flexplate. You will not have to remove your transmission to apply a new dust cover inspection plate, so installation should be simple and effective. From racers, show cars, hot rods, and daily drivers, you can trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, or 1981 Chevrolet Camaro! Learn More
$19.99 ea.

Add to Wishlist

Camaro Thermostat Housing, Chrome, With O-Ring Seal, 1967-1969 Part # C-501
Neoprene O ring (included). Includes chrome bolts and washers. Learn More
$22.99 ea.

Add to Wishlist

Camaro Vacuum Advance Cover, Chrome, 1967-1980 Part # C-5711
Adds Shiny Chrome Dress-Up Look To Distributor Installs Easily With Double-Faced Tape This machined aluminum cover is shiny chrome plated and attaches over the vacuum advance on your Camaro distributor with double-faced tape. Learn More
$4.99 ea.

Add to Wishlist

Camaro Oil Filler Cap, Valve Cover, Bowtie Logo, 3" Diameter, Push-In, Chrome, 1967-1969 Part # C-630
High quality push in valve cover oil fill plug with embossed Bow Tie logo. Learn More
$9.99 ea.

Add to Wishlist

Camaro Hood Latch Or Fender Bars Bolt Set, Bowtie Stamped, Chrome, 1967-1969 Part # CK-58
Dress up your Camaro! Officially licensed GM Product from Gardner-Westcott. Has the Chevy Bow-Tie emblem stamped onto the head of each bolt. High polished heavy chrome plated Learn More
$9.99 Set

Add to Wishlist

Camaro Engine Bolt Kit, Small Block, Stainless Steel, For Cars With Exhaust Headers, 1967-1969 Part # CK-45
Stainless bolt kit includes the following bolts: intake, valve cover, water neck, water pump, timing cover, fuel pump, oil pan, distributor hold-down, and header bolts. Learn More
$34.99 Kit

Add to Wishlist

Camaro Engine Cover Emblem, Red SS With Stainless Name Plate, 2010-2014 Part # 790211
High-Quality Polished Stainless Nameplate Plate Measures 5-1/8" x 1-3/8" Factory GM SS Emblem Automotive Grade Self-Adhesive Backing Modeled After '10-'13 Camaro Emblem These “SS” emblem polished stainless nameplates are the perfect addition to affix over the embossed V8 on the front of the factory engine cover. This plate will sit flush into that opening. The emblem included in each package is identical to the emblem on the grill and back panel. You will simply peel off the protective backing and affix it to the stainless plate Learn More
$39.99 ea.

Add to Wishlist

Camaro Thermostat Housing, With 1/2" NPT Port, Chrome, 1970-1992 Part # 718630
Triple Chrome Plated O-Ring Seal, No Gasket Required Hardware Included Did you know? Many people in our hobby refer to the thermostat housing as a water neck. Learn More
$15.99 ea.

Add to Wishlist

Camaro Hood Latch Pin & Spring Collar Kit, Billet, Detroit Speed, 1967-1981 Part # DS-65
Replacement Dress-Up Kit Machined From 304 Series Stainless Steel Hood Latch & Spring Not Included Learn More
$52.99 Kit

Add to Wishlist

Camaro Engine Oil Cap Cover, Chrome, 1993-2002 Part # 718155
Top Quality Chrome Plating Snaps Over Existing Cap Learn More
$19.99 ea.

Add to Wishlist

Camaro Distributor Cover, 1985-1992 Part # 718139
Replaces Missing, Broken or Discolored Originals Restores Showroom New Look Factory Original Part (Aluminum) Learn More
$38.99 ea.

Add to Wishlist

Camaro Engine Bolt Kit, Small Block, Chrome, For Cars With Exhaust Headers, 1967-1969 Part # CK-44
Chrome bolt kit includes the following bolts: intake, valve cover, water neck, water pump, timing cover, fuel pump, oil pan, distributor hold-down, and header bolts. Learn More
$99.99 Kit

Add to Wishlist

Camaro Thermostat Housing Bolt Set, Bowtie Stamped, Chrome,1967-1969 Part # CK-56
Dress up your Camaro! Officially licensed GM Product from Gardner-Westcot. Has the Chevy Bow-Tie emblem stamped onto the head of each bolt. High polished heavy chrome plated. Learn More
$4.99 Set

Add to Wishlist

Camaro Shock Tower Caps, Billet Aluminum Finish, 2010-2011 Part # 790319
Add A Custom Touch Under Your Hood Billet Aluminum Finish Includes Nut Covers Fits 3.6L V6 And 6.2L V8 LS3 / L99 Made In The USA Billet front strut covers are a great way to dress up your engine bay and stand out from the boring stock look! These are made from solid 6061 billet aluminum, they are designed to cover the factory shock tower and give that finished detailed appearence. Learn More
$79.99 pr.

Add to Wishlist

Camaro Engine Bolt Kit, Big Block, Stainless Steel, For Cars With Exhaust Headers, 1967-1969 Part # CK-49
Stainless bolt kit includes the following bolts: intake, valve cover, water neck, water pump, timing cover, fuel pump, oil pan, distributor hold-down, and header bolts. Learn More
$49.99 Kit

Add to Wishlist

Camaro Engine Shroud Cover, Polished, ZL1, 2012-2013 Part # 33-10256
100% Stainless Steel High Polished, Mirror Finish Will Not Tarnish, Fade Or Rust Adds A Unique Look And Style To Your Car Easy "Peel And Stick" Installation Takes Just Minutes Fits All 2012+ Coupe And Convertible ZL1 Camaros Only Made In USA! The New ACC Camaro Supercharger Engine Shroud is a great new way to customize your GM engine. These 304 high polished, hand crafted stainless covers will mount directly to the factory ZL1 Red Engine Shroud with 3M adhesive. NOTE: This kit is an ACC Exclusive and will add a truly custom look to your supercharged ZL1 Camaro! Learn More
$321.99 Set

Add to Wishlist

Camaro Shock Tower Caps, Billet Black Aluminum Finish, 2010-2011 Part # 790320
Add A Custom Touch Under Your Hood Billet Black Aluminum Finish Includes Nut Covers Fits 3.6L V6 And 6.2L V8 LS3 / L99 Made In The USA Billet front strut covers are a great way to dress up your engine bay and stand out from the boring stock look! These are made from solid 6061 billet aluminum, they are designed to cover the factory shock tower and give that finished detailed appearence. Learn More
$79.99 pr.

Add to Wishlist

Camaro Harmonic Balancer, V8, LT1 1993-1997 Part # 718971
Original Replacement Internally Balanced Neutral Balance Style With Degree Markings   Learn More
$89.99 ea.

Add to Wishlist

Camaro SS Emblem, White, With Plate, For Engine Cover, 2010-2014 Part # 790212
High-Quality Polished Stainless Nameplate Plate Measures 5-1/8" x 1-3/8" Factory GM SS Emblem Automotive Grade Self-Adhesive Backing These SS emblem polished stainless nameplates are the perfect addition to affix over the embossed V8 on the front of the factory engine cover. This plate will sit flush into that opening. The emblem included in each package is identical to the emblem on the grill and back panel. You will simply peel off the protective backing and affix it to the stainless plate. Learn More
$39.99 ea.

Add to Wishlist

Camaro Harmonic Balancer Cover, 6-3/4", With Bowtie Logo, Small Block, Chrome, 1969-1985 Part # 33-11988
Great Dress Up Item Eliminates Timing Tab Balancer Has Chevy Bowtie Engraved Mounts Directly Through The Center Hub Eliminates Outer Ring Inertia Slippage Made From Aluminum Chrome Finish 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985 Camaro small block Chevrolet engine is durable and avalible for dress up items. Ricks Camaros offers this Harmonic Balancer Cover for 6-3/4" balancer for small block chevrolet engines. This cover eliminates the need for the timing tab, mounts directly to the center hub, eliminates outer ring inertia slippage, is made from high quality aluminum and has the classic Chevrolet Bowtie engraved in the cover. Your 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985 Camaro engine will never look better. Trust Ricks Camaros for all your parts needs. Learn More
$39.99 ea.

Add to Wishlist

New!

Camaro Shock Tower Caps, Billet Red Aluminum Finish, 2010-2011 Part # 790322
Add A Custom Touch Under Your Hood Billet Red Aluminum Finish Includes Nut Covers Fits 3.6L V6 And 6.2L V8 LS3 / L99 Made In The USA Billet front strut covers are a great way to dress up your engine bay and stand out from the boring stock look! These are made from solid 6061 billet aluminum, they are designed to cover the factory shock tower and give that finished detailed appearence. Learn More
$79.99 pr.

Add to Wishlist

Camaro Shock Tower Caps, Billet Blue Aluminum Finish, 2010-2011 Part # 790321
Add A Custom Touch Under Your Hood Billet Blue Aluminum Finish Includes Nut Covers Fits 3.6L V6 And 6.2L V8 LS3 / L99 Made In The USA Billet front strut covers are a great way to dress up your engine bay and stand out from the boring stock look! These are made from solid 6061 billet aluminum, they are designed to cover the factory shock tower and give that finished detailed appearence. Learn More
$79.99 pr.

Add to Wishlist

Camaro Engine Bolt Kit, Big Block, Chrome, For Cars With Exhaust Headers, 1967-1969 Part # CK-48
Chrome bolt kit includes the following bolts: intake, valve cover, water neck, water pump, timing cover, fuel pump, oil pan, distributor hold-down, and header bolts. Learn More
$119.99 Kit

Add to Wishlist

Items 1 to 28 of 42 total Page:
  1. 1
  2. 2
  3. Next
Show per page
View as: Grid  List  Sort by
1