Product Experts Available 1-800-359-7717

CAMARO HOOD PARTS AND CAMARO HOODS FOR ALL YEARS AND MODELS

You need the best in Camaro hoods from Rick's Camaros, your one-stop shop for all your Camaro hood needs. Rick's Camaros is the most trusted name in Camaros, because we love them as much as our customers do. Shop the best selection of Camaro hoods around, and get your new hood from Rick's Camaros today.

Filter Your Result

CATEGORY
  1. Hood Bumpers and Stops (8)
  2. Hood Hinge (33)
  3. Hood Insulation (3)
  4. Hood Latch (16)
  5. Hood Spring (8)
BRAND
  1. (2)
  2. (4)
  3. (12)
  4. (8)
  5. (5)
  6. (5)
  7. (12)
  8. (1)
  9. (1)
PRICE RANGE
  1. (12)
  2. (13)
  3. (17)
  4. (4)
  5. (20)
 
Items 1 to 24 of 66 total Page:
  1. 1
  2. 2
  3. 3
  4. Next Page
Grid  List 
Camaro Hood Insulator Clip, 1970-2002 Part # 735329
Reproduction Of Original Retains Hood Insulation In Place 25 Required Per Car Ricks Camaros hood insulation retainers offer the same quality found on higher priced GM units at a significantly lower price. Critical for proper installation of your hood insulation, these black plastic retainers feature a wide head and a standard “Christmas tree” style shaft. You can rest assured that your hood insulation will be properly fastened with high quality parts from Ricks Camaros. Learn More
$0.99 ea.
Camaro Hood Hinge Spring, For Cowl Induction Or Super Sport Hoods, 1967-1969 Part # HD-55
Reproduction of Original Correct for Super Sport & Cowl Induction Hood (Functions Perfectly with All Steel Hoods) 28 Coils 9 3/8" Long End to End Spring Steel Plated Dull Black Finish Sold Each Two Required Per Car The original hood hinge springs on your 1967, 1968, 1969 Camaro can become rusted and worn, preventing your hood to open and close properly. Old, original springs will lose tension over time, causing the hood to drop slightly when it is open. Rick's Camaros is happy to offer this high quality reproduction hood hinge, which will perfectly replace the original on your steel hood. Plated dull black, this hinge spring is 9-3/8 inches in length with 28 correct coils for specific spring rate on heavier SS hoods. Don't wait to replace your hood hinge springs, and get your hood operating cleanly and effectively. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968 or 1969 1st gen Camaro! WARNING: Hood springs in general are not recommended for use on fiberglass hoods as the extra tension can cause stress cracks in the fiberglass reinforcement resulting in hood failure. Learn More

Was: $17.99 ea.

Now: $14.99 ea.

Camaro Hood Adjustment Bolt & Nut Set, 1967-1972 Part # HD-18P
Best Quality Reproduction Hood Bolts And Nuts Includes Correct Slotted Bolts & Flanged Stop Nuts Attaches To Core Support Set Of 4 Pieces Replaces GM #3996899 (Screw) & 1359887 (Nut) Rick's Camaros is happy to offer this set of hood adjustment bolts and nuts for your 1967, 1968, 1969, 1970, 1971, or 1972 Camaro's hood. This kit attaches to the core support and barely touches the bottom of your Camaro hood to keep it in place. As your Camaro rolls down the road, the hood is constanly moving side to side and front to back on the hood hinges. When topped with the rubber hood bumpers, this kit keeps the hood from moving around too much and scraching your Camaro's paint and it keeps the hood from going down too far when it is shut. This set or four includes correct slotted head screws and flanged stop nuts. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968, 1969, 1970, 1971, or 1972 1st or 2nd gen Camaro! Learn More

Was: $8.99 pr.

Now: $7.99 pr.

Camaro Hood Adjustment Bumper, 1993-1997 Part # 709037
Stock Replacement 2 Required Per Car This stock replacement hood adjustment bumper is manufactured by GM or by one of its authorized suppliers for use as a factory replacement part. You will find the fit, finish and function meets all GM specifications. Using stock replacement parts from Eckler's, such as this hood adjustment bumper, is a sound investment in the restoration or repair of your Camaro. Learn More

Was: $5.99 ea.

Now: $3.99 ea.

Camaro Hood Hinge, Left, Reproduction, Good Quality, 1967-1969 Part # HD-50
Replacement Hood Hinge   This Camaro replacement hood hinge has been manufactured to meet or exceed factory specifications and performance. You will find the fit and function will work perfectly for your Camaro. You will also be pleased to know that Rick's has sourced this hood hinge among other possible parts as the best choice for your repair or restoration project. Learn More
$44.99 ea.
Camaro Hood Hinge, Right, Reproduction, Good Quality, 1967-1969 Part # HD-51
 Replacement Hood Hinge   This Camaro replacement hood hinge has been manufactured to meet or exceed factory specifications and performance. You will find the fit and function will work perfectly for your Camaro. You will also be pleased to know that Rick's has sourced this hood hinge among other possible parts as the best choice for your repair or restoration project. Learn More
$44.99 ea.
Camaro Hood Lift Support, 1982-1992 Part # 735069
Highest Quality Replacement Support Available Easy To Install 2 Required Per Car Lifting the hood of your 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, or 1992 Camaro can be an annoying task if you don't have the proper tools to do it. Oftentimes you cannot see where to lift the hood, or simply have trouble unlatching it with your own hands. It's not worthing getting frustrated and getting your hands dirty. Rick's Camaros is happy to offer this reproduction hood life support for your F-Body Camaro, made to replace slow moving or inoperative hood supports. Matching factory specifications for your Camaro's hood, this lift support will make opening and lifting your hood as simple as it should be. Don't wait and make hood operation any harder on yourself. Get a new hood lift support today! Trust Rick's Camaros for all of your restoration and replacement needs for your 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, or 1992 Camaro. Learn More
$29.99 ea.
Camaro Hood Adjustment Bumper Cap, 1993-1997 Part # 709036
Stock Replacement 2 Required Per Car This stock replacement hood adjustment bumper cap is manufactured by GM or by one of its authorized suppliers for use as a factory replacement part. You will find the fit, finish and function meets all GM specifications. Using stock replacement parts from Eckler's, such as this hood adjustment bumper cap, is a sound investment in the restoration or repair of your Camaro. Learn More

Was: $5.99 ea.

Now: $3.99 ea.

Camaro Hood Hinge Spring, 1970-1981 Part # 735127
Reproduction Of Original 2 Required Per Car This Camaro reproduction hood hinge spring has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit, finish and function will work superbly for your restoration. In addition, using a reproduction hood hinge spring from Eckler's will add authenticity and value to your Camaro. Learn More

Was: $16.99 ea.

Now: $13.99 ea.

Camaro Hood Insulation, 1970-1981 Part # 735190
Replacement Hood Insulation  Fits Cars With Standard Hood Includes Functional Clip Set   Ecklers Camaro's understands your 1970-1981 Camaro hood insulation serves a very critical safety purpose. It’s not there to merely offer sound suppression from your engine or to protect your paint from heat. Your hood insulation is there to offer you some protection in case of an engine fire. During heavy heat, the plastic clips that hold the insulation in melt dropping the insulation on top of the engine to smother and reduce the spread of flames. Because of this, some F-body Camaro hood insulations are made to only cover the engine and not fully cover the inside of your hood.  Running a car without Camaro hood insulation can be a critical safety error that no one should make. Our affordable hood insulations are carefully sourced from quality manufacturers and made from modern asbestos free materials. Enjoy your classic 1970, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981 Camaro safely with quality replacement hood insulations from Ecklers Camaro. Learn More
$24.99 ea.
Camaro Hood Latch Assembly, 1967-1981 Part # HD-26
Good Quality Reproduction New Proprietary Tooling Black EDP Coated To Ensure Rust Prevention Includes Upper Lock Pate, Pilot Bolt, Pop-Up Spring Retainer Pre-Assembled For Easy Installation Rick's Camaros offers this accurate reproduction of the upper hood safety latch which bolts to the bottom of the Camaro hood. When the hood closes, the pilot bolt is caught by the hood opening mechanism and the hook on the mechanism catches the safety latch just in case the hood opening mechanism fails on your Camaro. Replace that ugly, rusted original with this EDP coated reproduction hood latch from Rick's today. This hood latch assembly comes from new proprietary tooling from 2009, includes the lock plate, pilot bolt, spring, retainer, and jamb nut, and comes properly preassembled for an easy installation. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, or 1981 1st or 2nd gen Camaro! WARNING: There are two nuts which hold the pilot bolt to the lock plate. Please make sure there is one nut on one side of the lock plate and one nut on the other side. This jams the pilot bolt, keeps it from backing out and reinforces the plate. Failure to check this may result in part failure at highway speed which could cause the hood to fly up.  Learn More

Was: $31.99 Kit

Now: $29.99 Kit

Camaro Hood Hinge, Right, 1970-1981 Part # 754071
Reproduction Of Original Hood Springs Sold Separately Learn More
$59.99 ea.
Camaro Hood Hinge, Left, 1970-1981 Part # 754070
Reproduction Of Original Hood Springs Sold Separately Learn More
$59.99 ea.
Camaro Hood Hinge Mounting Bolt Set, 1967-1969 Part # HD-25B
Reproduction Black Oxide Indented Hex Head Bolts Special Thick Captured Washer 8 Bolts Per Set   Learn More
$7.99 Set
Camaro Hood Hinge, Left, OE Style, Show Correct, 1967-1969 Part # HD-81
Show Correct Reproduction Of Original OE Style Original Gauge Material Quality Heavy Construction Gray Phosphate Plated Hardened Pivot Points Fits Driver's Side Rick's Camaros is proud to bring you show quality hood hinges to take out of the box and bolt right on your 1967, 1968, or 1969 Camaro! Why worry with the dangerous job of installing the springs yourself when you can buy these now and be ahead of the game? Replace your old hinges with this OE quality, reproduction hood hinge, made of original gauge material and accurately stamped from high strength steel. This hood hinge was constructed with hardened pivot points and correct dark gray phosphate plating, and will fit your F-Body's driver's side. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968, or 1969 1st gen Chevrolet Camaro! Learn More
$109.99 ea.
Camaro Hood Hinge, Right, OE Style, Show Correct, 1967-1969 Part # HD-80
Show Correct Reproduction Of Original OE Style Original Gauge Material Quality Heavy Construction Gray Phosphate Plated Hardened Pivot Points Fits Passenger's Side Rick's Camaros is proud to bring you show quality hood hinges to take out of the box and bolt right on your 1967, 1968, or 1969 Camaro! Why worry with the dangerous job of installing the springs yourself when you can buy these now and be ahead of the game? Replace your old hinges with this OE quality, reproduction hood hinge, made of original gauge material and accurately stamped from high strength steel. This hood hinge was constructed with hardened pivot points and correct dark gray phosphate plating, and will fit your F-Body's passenger's side. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968, or 1969 1st gen Chevrolet Camaro! Learn More
$109.99 ea.
Camaro Hood Hinge Spring, For Flat Hood, 1967-1969 Part # 33-10871
Best Quality Reproduction Hood Hinge Spring For Cars With Flat Hood 26 Coils 8-5/8" Long Correct .200" Diameter Wire Black EDP Coated Nice reproduction of the original Camaro flat hood spring. Old, original hood springs will lose tension over the years and cause the hood on your standard Camaro, Rally Sport or Z/28 to drop slightly when it is open. Replace your original hood springs with this quality reproduction from Rick's First Generation and know you are getting the best parts at the best possible price. Fits: 1967, 1968 and 1969 NOTE: Hood springs in general are not recommended for use on fiberglass hoods as the extra tension can cause stress cracks in the fiberglass reinforcement resulting in hood failure. Learn More
$13.99 ea.
Camaro Hood Latch Release, Fits All (Non-Rally Sport Or Rally Sport RS), 1969 Part # HD-23
Best Quality Reproduction Hood Opening Mechanism Officially Licensed GM Restoration Part Fits All 69 Camaros With Flat, SS or Cowl Induction Hoods Correct Factory Gauge Metal Dark Gray Phosphate Plating As Original This Hood Latch Release Does Not Have The Aftermarket Manufacturer's Stamp Like Other Inferior Reproductions Out There If you need a new hood latch release mechanism for your 1969 Camaro, look no further! Over time, this part can rust and wear down, leaving your front hood not opening or locking properly. Rick's Camaros offers this show quality reproduction hood latch release, made with correct gauge, dark gray phosphate plating, and no manufacturer embossing. This officially GM licensed hood catch will replace your original F-Body's standard hood. Trust Rick's Camaros for all of your restoration and replacement needs for your 1969 1st gen Rally or non Rally Sport Camaro! Learn More
$68.99 ea.
Camaro Hood Release, Rally Sport (RS), Good Quality, 1967-1968 Part # HD-22-1
Good Quality Reproduction Black EDP Coated Eckler's Select Series A good quality reproduction of the RS hood latch. This hood latch is a solid, functional value for the restorer working on a budget and not concerned with correct plating. Replace your RS hood latch with a quality reproduction from Rick's today and know you are getting the best parts for your restoration. Learn More
$59.99 ea.
Camaro Hood Latch Spring, 1967-1981 Part # HD-8
Reproduction Hood Lock Spring Stainless Steel Finish Replaces GM #3857882 In order to make your hood latch release assembly work properly in your 1967-1981 Camaro, you'll need a new hood safety latch spring. Coming in a stainless steel finish, this spring will work great in your hood latch assembly. Trust Rick's Camaros for all of your restoration and replacement needs for your 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, or 1981 1st or 2nd gen Camaro! Learn More

Was: $8.99 ea.

Now: $5.99 ea.

Camaro Hood Hinge Bolt Set, 1970-1978 Part # 754100
Reproduction Black Oxide Indented Hex Head Bolts Special Captured Washer Attaches Hood Hinge To Fender 8 Bolts Per Set Nice reproduction of a bolt which is usually rusted beyond re-use. Why buy a nice, new set of billet hinges and then use your nasty old bolts to put them on the car? Save time and money with this new set of hood hinge bolts from Rick's. Learn More
$9.99 Set
Items 1 to 24 of 66 total Page:
  1. 1
  2. 2
  3. 3
  4. Next Page
Grid  List 
3