Skip to Main Content »

1-800-359-7717

Camaro Intake Systems

0  Items Total: $0.00 View Cart Checkout

Filter Your Results

Brand
  1. Edelbrock (4)
  2. Vararam Air Intakes (1)
Price
  1. $30.00 to $199.99 (6)
  2. $200.00 to $249.99 (8)
  3. $250.00 to $299.99 (4)
  4. $300.00 to $499.99 (7)
  5. $5000.00 to $7999.99 (4)

Facebook and Twitter

Follow Rick's Camaros Facebook  Follow Eckler's on Twitter  FollowRick's on Facebook and Twitter

 

You're currently on:

CAMARO INTAKE SYSTEMS FOR 'ALL YEARS AND MODELS'

Items 1 to 28 of 29 total Page:
  1. 1
  2. 2
  3. Next
Show per page
View as: Grid  List  Sort by
Best Sellers
Camaro Vararam Velocity Stack, 1998-2002 Part # 718175
Adds 6-13 Horsepower Adds 6-10 Ft./Lbs. Torque Pressure Fits Into Throttle Body In just minutes you can add the VR Velocity Stack to your LS1 throttle body and gain horsepower and torque that you can feel in the seat of your pants. The stack reshapes the throttle body housing to greatly improve air flow throughout the entire RPM band so you feel the power the instant you stab the throttle and until you reach peak RPM. In fact throttle response will be immediately improved with this high temperature ABS unit that simply pressure fits into the throttle body housing. The VR Stack works well with the factory air cleaner and works best with the factory accordion hose. However, for even better results the VR Stack provides the optimum power gains with aftermarket intake systems. Learn More
$34.99 ea.

Add to Wishlist

Camaro Air Intake Kit, 4 Inch, DTM Plenum, Single Inlet, 1970-1981 Part # 33-10051
4" Single Inlet Designed To Fit Muscle Car For Better Fit & Finish Plenum Design Offers Extremely Low Profile Dimensions For Tight Hood Clearance Applications Fits All Carburetors & TBI Throttle Bodies With 5 1/8" Inlet (Always Check Hood Applications Beforehand) Designed To Give Greatest Horsepower & Torque Increase By Routing Intake Inlet Away From Heat Sources Like The Radiator & Headers Manufactured By Spectre Performance From High Quality Polished Aluminum Tubing Powdercoated Heat Shields Help Prevent Hot Air From Entering Intake Inlet Rick’s Camaros is happy to offer DTM plenum single inlet air intake kits for your 1970-1981 Camaro. This four inch air intake kit is the best way to boost power and give your engine compartment a great look. Manufactured by Spectre Performance, this set can add as much as an additional 50HP through cool air sent to your F-Body’s engine. These systems use a DTM (“Down The Middle”) plenum design, which enables the most power to your engine. The aluminum plenum design offers low-profile dimensions for all tight clearance applications, and is designed to route the intake inlet away from heat sources in your engine. This Spectre set comes complete with all the necessary aluminum intake tubes, filters, boots, clamps, and other stainless steel mounting hardware. With the choice of red, blue, black, and white, you can personalize the air intake system for your special street car’s engine. Trust Rick’s Camaros for all of your restoration and replacement needs for your 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, or 1981 Camaro! Note: Requires 2-1/4” clearance from top of carburetor. Not legal in California on 1976-1981 models. Learn More
$299.99 ea.

Add to Wishlist

Camaro Air Intake Kit, 4 Inch, Single Inlet, LSX, Driver Side, With In-Boot MAF, 1970-1981 Part # 33-10026
Air induction systems designed to fit your classic musclecar for a better than original equipment fit and finish Designed for applications where later model LS engines have been installed using a speed density computer system Designed for applications where later model LS engines have been installed using a blade style MAF Sensor Designed to give you the greatest horsepower and torque increase by routing the intake inlet away from heat souces like the radiator and headers Manufactured from high quality polished aluminum tubing Powdercoated heat shields help prevent hot air from entering the intake inlet Learn More
$219.99 ea.

Add to Wishlist

Camaro Air Intake Kit, 4 Inch, DTM Plenum, Single Inlet, 1967-1969 Part # 33-10106
4" Single Inlet Designed To Fit Muscle Car For Better Fit & Finish Plenum Design Offers Extremely Low Profile Dimensions For Tight Hood Clearance Applications Fits All Carburetors & TBI Throttle Bodies With 5 1/8" Inlet (Always Check Hood Applications Beforehand) Designed To Give Greatest Horsepower & Torque Increase By Routing Intake Inlet Away From Heat Sources Like The Radiator & Headers Manufactured By Spectre Performance From High Quality Polished Aluminum Tubing Powdercoated Heat Shields Help Prevent Hot Air From Entering Intake Inlet Rick’s Camaros is happy to offer DTM plenum single inlet air intake kits for your 1967, 1968, or 1969 Camaro. This four inch air intake kit is the best way to boost power and give your engine compartment a great look. Manufactured by Spectre Performance, this set can add as much as an additional 50HP through cool air sent to your F-Body’s engine. These systems use a DTM (“Down The Middle”) plenum design, which enables the most power to your engine. The aluminum plenum design offers low-profile dimensions for all tight clearance applications, and is designed to route the intake inlet away from heat sources in your engine. This Spectre set comes complete with all the necessary aluminum intake tubes, filters, boots, clamps, and other stainless steel mounting hardware. With the choice of red, blue, black, and white, you can personalize the air intake system for your special street car’s engine. Trust Rick’s Camaros for all of your restoration and replacement needs for your 1967, 1968, or 1969 Camaro! Note: Requires 2-1/4” clearance from top of carburetor. Learn More
$299.99 ea.

Add to Wishlist

Camaro Air Intake Kit, 4 Inch, Single Inlet, Driver Side, Speed Density, 1970-1981 Part # 33-10006
Air induction systems designed to fit your classic musclecar for a better than original equipment fit and finish Designed for applications where later model LS engines have been installed using a speed density computer system Designed to give you the greatest horsepower and torque increase by routing the intake inlet away from heat souces like the radiator and headers Manufactured from high quality polished aluminum tubing Powdercoated heat shields help prevent hot air from entering the intake inlet Learn More
$199.99 ea.

Add to Wishlist

Camaro Air Intake Kit, 4 Inch, Single Inlet, LSX, Driver Side, With In-Boot MAF, 1967-1969 Part # 33-10081
Air induction systems designed to fit your classic musclecar for a better than original equipment fit and finish Designed for applications where later model LS engines have been installed using a speed density computer system Designed for applications where later model LS engines have been installed using a blade style MAF Sensor Designed to give you the greatest horsepower and torque increase by routing the intake inlet away from heat souces like the radiator and headers Manufactured from high quality polished aluminum tubing Powdercoated heat shields help prevent hot air from entering the intake inlet Learn More
$219.99 ea.

Add to Wishlist

Camaro Air Intake Kit, 4 inch, Dual Plenum, 1967-1969 Part # 33-10096
Air induction systems designed to fit your classic musclecar for an original equipment like fit and finish Cast aluminum plenum design fits all carburetors and TBI throttle bodies with 5 1/8 In. inlet with many kits offering a low profile design for tight hood clearance applications Manufactured from high quality polished aluminum tubing, each system is designed to give you the greatest horsepower and torque increase by routing the intake inlet away from heat souces like the radiator and headers Learn More
$499.99 ea.

Add to Wishlist

Edelbrock 2010-2014 Camaro E-Force Street Supercharger Kit, With Manual Transmission Part # 719647
Supercharger Manifold Assembly (Featuring Eaton TVS Rotors) Cast Aluminum Alternator/Idler Bracket Heavy Duty Automatic Belt Tensioner Dual, High Capacity, Bar & Plate Intercoolers Full Face Low Temp. Heat Exchanger for Intercooler System Extruded Aluminum Fuel Rails with -6 AN Lines Electric Intercooler Water Pump Intercooler Recovery Tank Steel Idler Pulleys With Heavy Duty High Speed Bearings For Manual Transmission The Edelbrock E-Force Supercharger can take your already high performance street car to the next level. This supercharger kit is exclusively tailored for the 2010, 2011, 2012, 2013 or 2014 Camaro SS and will allow you to boost your performance to a whole new level. The unique features of this kit are the 12" long intake runners that allow for maximum low end torque and the optional 5 year 100,000 mile warranty. Its compact design fits under the stock hood and complements the clean look of the engine compartment. The street kits include the components from the competition kits, plus other items needed for daily driver use. Trust Rick's Camaros for all of your restoration and replacement needs for your 2010, 2011, 2012, 2013, or 2014 F-Body Camaro!  Learn More
$7,199.99 Kit

Add to Wishlist

Camaro Air Intake Kit, 4 Inch, Single Inlet, Driver Side, Speed Density, 1967-1969 Part # 33-10061
Air induction systems designed to fit your classic musclecar for a better than original equipment fit and finish Designed for applications where later model LS engines have been installed using a speed density computer system Designed to give you the greatest horsepower and torque increase by routing the intake inlet away from heat souces like the radiator and headers Manufactured from high quality polished aluminum tubing Powdercoated heat shields help prevent hot air from entering the intake inlet Learn More
$199.99 ea.

Add to Wishlist

Camaro Air Intake Kit, 4 inch, Single Inlet, LSX, Passenger Side, With MAF, 1967-1969 Part # 33-10076
Air induction systems designed to fit your classic musclecar for a better than original equipment fit and finish Designed for applications where later model LS engines have been installed using a speed density computer system Designed for applications where later model LS engines have been installed using a blade style MAF Sensor Designed to give you the greatest horsepower and torque increase by routing the intake inlet away from heat souces like the radiator and headers Manufactured from high quality polished aluminum tubing Powdercoated heat shields help prevent hot air from entering the intake inlet Learn More
$219.99 ea.

Add to Wishlist

Edelbrock 2010-2014 E-Force Camaro Street Supercharger Kit, For Automatic Transmission Part # 719646
Supercharger Manifold Assembly (Featuring Eaton TVS Rotors) Cast Aluminum Alternator/Idler Bracket Heavy Duty Automatic Belt Tensioner Dual, High Capacity, Bar & Plate Intercoolers Full Face Low Temp. Heat Exchanger for Intercooler System Extruded Aluminum Fuel Rails with -6 AN Lines Electric Intercooler Water Pump Intercooler Recovery Tank Steel Idler Pulleys With Heavy Duty High Speed Bearings For Automatic Transmission The Edelbrock E-Force Supercharger can take your already high performance street car to the next level. This supercharger kit is exclusively tailored for the 2010, 2011, 2012, 2013, or 2014 Camaro SS and will allow you to boost your performance to a whole new level. The unique features of this kit are the 12" long intake runners that allow for maximum low end torque and the optional 5 year 100,000 mile warranty. Its compact design fits under the stock hood and complements the clean look of the engine compartment. The Street kits include the components from the competition kits, plus other items needed for daily driver use. Trust Rick's Camaros for all of your restoration and replacement needs for your 2010, 2011, 2012, 2013, or 2014 F-Body Camaro!  Learn More
$7,199.99 Kit

Add to Wishlist

Edelbrock 2010-2014 Camaro E-Force Competition Supercharger Kit, For Automatic Transmission Part # 719645
Supercharger Manifold Assembly (Featuring Eaton TVS Rotors) Cast Aluminum Alternator/Idler Bracket Heavy Duty Automatic Belt Tensioner Dual, High Capacity, Bar & Plate Intercoolers Full Face Low Temp. Heat Exchanger for Intercooler System Extruded Aluminum Fuel Rails with -6 AN Lines Electric Intercooler Water Pump Intercooler Recovery Tank Steel Idler Pulleys With Heavy Duty High Speed Bearings For Automatic Transmission The Edelbrock Competition Supercharger can take your already high performance street car to the next level. This supercharger kit is exclusively tailored for the 2010, 2011, 2012, 2013, or 2014 Camaro SS and will allow you to boost your performance to a whole new level. The unique features of this kit are the 12" long intake runners that allow for maximum low end torque and the optional 5 year 100,000 mile warranty. Its compact design fits under the stock hood and complements the clean look of the engine compartment. This E-Force Competition Supercharger kit is based off of our street supercharger kit P/N 719646, but is paired down to the essential components that a racer needs, without the extras that experienced racers prefer to customize for their own competitive advantage. For competition racing use only. Trust Rick's Camaros for all of your restoration and replacement needs for your 2010, 2011, 2012, 2013, or 2014 racing Camaro!  Learn More
$5,999.99 Kit

Add to Wishlist

Camaro Air Intake Kit, 4 inch, Dual Plenum, 1970-1981 Part # 33-10041
Air induction systems designed to fit your classic musclecar for an original equipment like fit and finish Cast aluminum plenum design fits all carburetors and TBI throttle bodies with 5 1/8 In. inlet with many kits offering a low profile design for tight hood clearance applications Manufactured from high quality polished aluminum tubing, each system is designed to give you the greatest horsepower and torque increase by routing the intake inlet away from heat souces like the radiator and headers Learn More
$499.99 ea.

Add to Wishlist

Camaro Air Intake Kit, 4 Inch, Dual Inlet, LSX, Speed Density/In-Boot MAF, 1967-1969 Part # 33-10056
Air induction systems designed to fit your classic musclecar for a better than original equipment fit and finish Designed for applications where later model LS engines have been installed using a speed density computer system Designed to give you the greatest horsepower and torque increase by routing the intake inlet away from heat souces like the radiator and headers Manufactured from high quality polished aluminum tubing Powdercoated heat shields help prevent hot air from entering the intake inlet Learn More
$399.99 ea.

Add to Wishlist

Edelbrock 2010-2014 Camaro E-Force Competition Supercharger Kit, Manual Transmission Part # 719644
Supercharger Manifold Assembly (Featuring Eaton TVS Rotors) Cast Aluminum Alternator/Idler Bracket Heavy Duty Automatic Belt Tensioner Dual, High Capacity, Bar & Plate Intercoolers Full Face Low Temp. Heat Exchanger for Intercooler System Extruded Aluminum Fuel Rails with -6 AN Lines Electric Intercooler Water Pump Intercooler Recovery Tank Steel Idler Pulleys With Heavy Duty High Speed Bearings For Manual Transmission The Edelbrock Competition Supercharger can take your already high performance street car to the next level. This supercharger kit is exclusively tailored for the 2010, 2011, 2012, 2013, or 2014 Camaro SS and will allow you to boost your performance to a whole new level. The unique features of this kit are the 12" long intake runners that allow for maximum low end torque and the optional 5 year 100,000 mile warranty. Its compact design fits under the stock hood and complements the clean look of the engine compartment. This E-Force Competition Supercharger kit is based off of our street supercharger kit P/N 719647, but is paired down to the essential components that a racer needs, without the extras that experienced racers prefer to customize for their own competitive advantage. For competition racing use only. Trust Rick's Camaros for all of your restoration and replacement needs for your 2010, 2011, 2012, 2013, or 2014 racing Camaro!  Learn More
$5,999.99 Kit

Add to Wishlist

Camaro Air Intake Kit, 4 inch, Single Inlet, LSX, Passenger Side, With MAF, 1970-1981 Part # 33-10021
Air induction systems designed to fit your classic musclecar for a better than original equipment fit and finish Designed for applications where later model LS engines have been installed using a speed density computer system Designed for applications where later model LS engines have been installed using a blade style MAF Sensor Designed to give you the greatest horsepower and torque increase by routing the intake inlet away from heat souces like the radiator and headers Manufactured from high quality polished aluminum tubing Powdercoated heat shields help prevent hot air from entering the intake inlet Learn More
$219.99 ea.

Add to Wishlist

Camaro Air Intake Kit, 4 inch, Single Plenum, 1970-1981 Part # 33-10036
Air induction systems designed to fit your classic musclecar for an original equipment like fit and finish Cast aluminum plenum design fits all carburetors and TBI throttle bodies with 5 1/8 In. inlet with many kits offering a low profile design for tight hood clearance applications Manufactured from high quality polished aluminum tubing, each system is designed to give you the greatest horsepower and torque increase by routing the intake inlet away from heat souces like the radiator and headers Learn More
$299.99 ea.

Add to Wishlist

Camaro Air Intake Kit, 4 Inch, DTM Plenum, Dual Inlet, 1967-1969 Part # 33-10101
4" Dual Inlet Designed To Fit Muscle Car For Better Fit & Finish Plenum Design Offers Extremely Low Profile Dimensions For Tight Hood Clearance Applications Fits All Carburetors & TBI Throttle Bodies With 5 1/8" Inlet (Always Check Hood Applications Beforehand) Designed To Give Greatest Horsepower & Torque Increase By Routing Intake Inlet Away From Heat Sources Like The Radiator & Headers Manufactured By Spectre Performance From High Quality Polished Aluminum Tubing Powdercoated Heat Shields Help Prevent Hot Air From Entering Intake Inlet Rick’s Camaros is happy to offer DTM plenum dual inlet air intake kits for your 1967, 1968, or 1969 Camaro. This four inch air intake kit is the best way to boost power and give your engine compartment a great look. Manufactured by Spectre Performance, this set can add as much as an additional 50HP through cool air sent to your F-Body’s engine. These systems use a DTM (“Down The Middle”) plenum design, which enables the most power to your engine. The aluminum plenum design offers low-profile dimensions for all tight clearance applications, and is designed to route the intake inlet away from heat sources in your engine. This Spectre set comes complete with all the necessary aluminum intake tubes, filters, boots, clamps, and other stainless steel mounting hardware. With the choice of red, blue, black, and white, you can personalize the air intake system for your special street car’s engine. Trust Rick’s Camaros for all of your restoration and replacement needs for your 1967, 1968, or 1969 Camaro! Note: Requires 2-1/4” clearance from top of carburetor.      Learn More
$499.99 ea.

Add to Wishlist

Camaro Air Intake Kit, 4 Inch, Dual Inlet, LSX, Speed Density/In-Boot MAF, 1970-1981 Part # 33-10001
Air induction systems designed to fit your classic musclecar for a better than original equipment fit and finish Designed for applications where later model LS engines have been installed using a speed density computer system Designed to give you the greatest horsepower and torque increase by routing the intake inlet away from heat souces like the radiator and headers Manufactured from high quality polished aluminum tubing Powdercoated heat shields help prevent hot air from entering the intake inlet Learn More
$399.99 ea.

Add to Wishlist

Camaro Air Intake Kit, 4 inch, Single Inlet, LSX, Driver Side, With MAF, 1970-1981 Part # 33-10016
Air induction systems designed to fit your classic musclecar for a better than original equipment fit and finish Designed for applications where later model LS engines have been installed using a speed density computer system Designed for applications where later model LS engines have been installed using a blade style MAF Sensor Designed to give you the greatest horsepower and torque increase by routing the intake inlet away from heat souces like the radiator and headers Manufactured from high quality polished aluminum tubing Powdercoated heat shields help prevent hot air from entering the intake inlet Learn More
$219.99 ea.

Add to Wishlist

Camaro Air Intake Kit, 4 inch, Single Plenum, 1967-1969 Part # 33-10091
Air induction systems designed to fit your classic musclecar for an original equipment like fit and finish Cast aluminum plenum design fits all carburetors and TBI throttle bodies with 5 1/8 In. inlet with many kits offering a low profile design for tight hood clearance applications Manufactured from high quality polished aluminum tubing, each system is designed to give you the greatest horsepower and torque increase by routing the intake inlet away from heat souces like the radiator and headers Learn More
$299.99 ea.

Add to Wishlist

Camaro Edelbrock 3X2 Intake Manifold, Small Block,1967-1974 Part # 720640
"Performer" Tri-Power Intake Manifold Idle-5500 RPM Will Not Fit HEI Designed for 283-302-305-307-327-350-400 c.i.d. Chevy V8s. This manifold has a balanced 180 firing order port runner arrangement. It contains an exhaust gas heat riser and offers excellent performance potential. Front oil filler tube boss included. Carb center-to-center: 5-1/2''. Learn More
$329.99 ea.

Add to Wishlist

Camaro Air Intake Kit, 4 inch, Single Inlet, LSX, Driver Side, With MAF, 1967-1969 Part # 33-10071
Air induction systems designed to fit your classic musclecar for a better than original equipment fit and finish Designed for applications where later model LS engines have been installed using a speed density computer system Designed for applications where later model LS engines have been installed using a blade style MAF Sensor Designed to give you the greatest horsepower and torque increase by routing the intake inlet away from heat souces like the radiator and headers Manufactured from high quality polished aluminum tubing Powdercoated heat shields help prevent hot air from entering the intake inlet Learn More
$219.99 ea.

Add to Wishlist

Camaro Super Sucker Carburetor Spacer, 1", HVH Aluminum, 1970-1981 Part # 718790
Adds 20 or More Horsepower Increases Gas Mileage Improves Throttle Response Insulates Carburetor from Intake Manifold Heat Check Hood Clearance Prior To Installing For Use With Non-Original Intake & Carburetors Only (Suqare Bore Bolt Pattern) Talk about bang for the buck! With this HVH Aluminum Super Sucker Carburetor Spacer you can gain 20 or more horsepower, increase your gas mileage, improve your vehicles throttle response and reduce your drag strip e.t.'s by nearly a one half second. The HVH Aluminum Super Sucker Carburetor Spacer is designed to improve the signal from the carburetor requiring less fuel during normal driving conditions. Once on the drag strip your vehicle's performance will increase dramatically at wide open throttle using the HVH Aluminum Super Sucker Carburetor Spacer. The HVH Aluminum Super Sucker Carburetor Spacer is used by many of the industries top engine builders as a power producer because of its dyno results. The spacer includes hardware, gaskets and installation instructions. Learn More
$99.99 ea.

Add to Wishlist

Camaro Air Intake Kit, 4 Inch, Single Inlet, LSX, Passenger Side, With In-Boot MAF, 1967-1969 Part # 33-10086
Air induction systems designed to fit your classic musclecar for a better than original equipment fit and finish Designed for applications where later model LS engines have been installed using a speed density computer system Designed for applications where later model LS engines have been installed using a blade style MAF Sensor Designed to give you the greatest horsepower and torque increase by routing the intake inlet away from heat souces like the radiator and headers Manufactured from high quality polished aluminum tubing Powdercoated heat shields help prevent hot air from entering the intake inlet Learn More
$219.99 ea.

Add to Wishlist

Camaro Air Intake Kit, 4 Inch, Single Inlet, Passenger Side, Speed Density, 1967-1969 Part # 33-10066
Air induction systems designed to fit your classic musclecar for a better than original equipment fit and finish Designed for applications where later model LS engines have been installed using a speed density computer system Designed to give you the greatest horsepower and torque increase by routing the intake inlet away from heat souces like the radiator and headers Manufactured from high quality polished aluminum tubing Powdercoated heat shields help prevent hot air from entering the intake inlet Learn More
$199.99 ea.

Add to Wishlist

Camaro Air Intake Kit, 4 Inch, Single Inlet, LSX, Passenger Side, With In-Boot MAF, 1970-1981 Part # 33-10031
Air induction systems designed to fit your classic musclecar for a better than original equipment fit and finish Designed for applications where later model LS engines have been installed using a speed density computer system Designed for applications where later model LS engines have been installed using a blade style MAF Sensor Designed to give you the greatest horsepower and torque increase by routing the intake inlet away from heat souces like the radiator and headers Manufactured from high quality polished aluminum tubing Powdercoated heat shields help prevent hot air from entering the intake inlet Learn More
$219.99 ea.

Add to Wishlist

Camaro Air Intake Kit, 4 Inch, DTM Plenum, Dual Inlet, 1970-1981 Part # 33-10046
 4" Dual Inlet Designed To Fit Muscle Car For Better Fit & Finish Plenum Design Offers Extremely Low Profile Dimensions For Tight Hood Clearance Applications Fits All Carburetors & TBI Throttle Bodies With 5 1/8" Inlet (Always Check Hood Applications Beforehand) Designed To Give Greatest Horsepower & Torque Increase By Routing Intake Inlet Away From Heat Sources Like The Radiator & Headers Manufactured By Spectre Performance From High Quality Polished Aluminum Tubing Powdercoated Heat Shields Help Prevent Hot Air From Entering Intake Inlet Rick’s Camaros is happy to offer DTM plenum dual inlet air intake kits for your 1970-1981 Camaro. This four inch air intake kit is the best way to boost power and give your engine compartment a great look. Manufactured by Spectre Performance, this set can add as much as an additional 50HP through cool air sent to your F-Body’s engine. These systems use a DTM (“Down The Middle”) plenum design, which enables the most power to your engine. The aluminum plenum design offers low-profile dimensions for all tight clearance applications, and is designed to route the intake inlet away from heat sources in your engine. This Spectre set comes complete with all the necessary aluminum intake tubes, filters, boots, clamps, and other stainless steel mounting hardware. With the choice of red, blue, black, and white, you can personalize the air intake system for your special street car’s engine. Trust Rick’s Camaros for all of your restoration and replacement needs for your 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, or 1981 Camaro! Note: Requires 2-1/4” clearance from top of carburetor. Not legal in California on 1976-1981 models. Learn More
$499.99 ea.

Add to Wishlist

Items 1 to 28 of 29 total Page:
  1. 1
  2. 2
  3. Next
Show per page
View as: Grid  List  Sort by
3