Product Experts Available 1-800-359-7717

CAMARO MASS AIR FLOW SENSORS FOR ALL YEARS AND MODELS

Filter Your Result

BRAND
  1. (5)
  2. (22)
PRICE RANGE
  1. (17)
  2. (10)
 
Items 1 to 24 of 27 total Show per page Page:
  1. 1
  2. 2
  3. Next Page
Grid  List 
Camaro Mass Air Sensor, Jet Performance, 3.6L, 2012-2013 Part # 33-10299
Improves Horsepower, Torque And Mileage Works With Upgrades Like Cold Air Intakes And Free Flow Exhausts Increases Of 45% In Air Flow Used With 3.6L Engine The JET Powr-Flo Mass Air Sensor delivers improved horsepower, torque and mileage from your car by simply replacing the restrictive stock mass air sensor. The factory sensor not only is a major restrictive point in stock intake systems, but it also limits the full potential of aftermarket cold air intake systems. The flow bench tested design of the JET Mass Air Sensor provides airflow increases of up to 45% and installs in 10 minutes or less. Compatible with other aftermarket upgrades such as computer upgrades, cold air intakes, TBI spacers, free flow exhaust systems, etc. Learn More

Was: $199.99 ea.

Now: $179.99 ea.

Camaro Air Intake Kit, 4 Inch, DTM Plenum, Single Inlet, 1970-1981 Part # 33-10051
4" Single Inlet Designed To Fit Muscle Car For Better Fit & Finish Plenum Design Offers Extremely Low Profile Dimensions For Tight Hood Clearance Applications Fits All Carburetors & TBI Throttle Bodies With 5 1/8" Inlet (Always Check Hood Applications Beforehand) Designed To Give Greatest Horsepower & Torque Increase By Routing Intake Inlet Away From Heat Sources Like The Radiator & Headers Manufactured By Spectre Performance From High Quality Polished Aluminum Tubing Powdercoated Heat Shields Help Prevent Hot Air From Entering Intake Inlet Rick’s Camaros is happy to offer DTM plenum single inlet air intake kits for your 1970-1981 Camaro. This four inch air intake kit is the best way to boost power and give your engine compartment a great look. Manufactured by Spectre Performance, this set can add as much as an additional 50HP through cool air sent to your F-Body’s engine. These systems use a DTM (“Down The Middle”) plenum design, which enables the most power to your engine. The aluminum plenum design offers low-profile dimensions for all tight clearance applications, and is designed to route the intake inlet away from heat sources in your engine. This Spectre set comes complete with all the necessary aluminum intake tubes, filters, boots, clamps, and other stainless steel mounting hardware. With the choice of red, blue, black, and white, you can personalize the air intake system for your special street car’s engine. Trust Rick’s Camaros for all of your restoration and replacement needs for your 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, or 1981 Camaro! Note: Requires 2-1/4” clearance from top of carburetor. Not legal in California on 1976-1981 models. Learn More
$299.99 ea.
Camaro Mass Air Sensor, Jet Performance, 6.2 Or 7.0, 2010-2013 Part # 33-10278
Improves Horsepower, Torque And Mileage Works With Upgrades Like Cold Air Intakes And Free Flow Exhausts Increases Of 45% In Air Flow Used With 6.2 Or 7.0 Engines The JET Powr-Flo Mass Air Sensor delivers improved horsepower, torque and mileage from your car by simply replacing the restrictive stock mass air sensor. The factory sensor not only is a major restrictive point in stock intake systems, but it also limits the full potential of aftermarket cold air intake systems. The flow bench tested design of the JET Mass Air Sensor provides airflow increases of up to 45% and installs in 10 minutes or less. Compatible with other aftermarket upgrades such as computer upgrades, cold air intakes, TBI spacers, free flow exhaust systems, etc. Learn More

Was: $189.99 ea.

Now: $159.99 ea.

Camaro Mass Air Sensor, Jet Performance, 3.6L, 2010 Part # 33-10957
Improves Horsepower, Torque And Mileage Works With Upgrades Like Cold Air Intakes And Free Flow Exhausts Increases Of 45% In Air Flow Used With 3.6L Engine Made In USA The JET Powr-Flo Mass Air Sensor for your 2010 Camaro delivers improved horsepower, torque and mileage from your car by simply replacing the restrictive stock mass air sensor. The factory sensor not only is a major restrictive point in stock intake systems, but it also limits the full potential of aftermarket cold air intake systems. The flow bench tested design of the JET Mass Air Sensor provides airflow increases of up to 45% and installs in 10 minutes or less. Compatible with other aftermarket upgrades such as computer upgrades, cold air intakes, TBI spacers, free flow exhaust systems, etc. Trust Ricks Camaros for all your needs. Learn More

Was: $179.99 ea.

Now: $159.99 ea.

Camaro Air Intake Kit, 4 Inch, Dual Inlet, LSX, Speed Density/In-Boot MAF, 1970-1981 Part # 33-10001
Air induction systems designed to fit your classic musclecar for a better than original equipment fit and finish Designed for applications where later model LS engines have been installed using a speed density computer system Designed to give you the greatest horsepower and torque increase by routing the intake inlet away from heat souces like the radiator and headers Manufactured from high quality polished aluminum tubing Powdercoated heat shields help prevent hot air from entering the intake inlet Learn More
$399.99 ea.
Camaro Air Intake Kit, 4 Inch, Single Inlet, Driver Side, Speed Density, 1970-1981 Part # 33-10006
Air induction systems designed to fit your classic musclecar for a better than original equipment fit and finish Designed for applications where later model LS engines have been installed using a speed density computer system Designed to give you the greatest horsepower and torque increase by routing the intake inlet away from heat souces like the radiator and headers Manufactured from high quality polished aluminum tubing Powdercoated heat shields help prevent hot air from entering the intake inlet Learn More
$199.99 ea.
Camaro Air Intake Kit, 4 Inch, Single Inlet, Passenger Side, Speed Density, 1970-1981 Part # 33-10011
Air induction systems designed to fit your classic musclecar for a better than original equipment fit and finish Designed for applications where later model LS engines have been installed using a speed density computer system Designed to give you the greatest horsepower and torque increase by routing the intake inlet away from heat souces like the radiator and headers Manufactured from high quality polished aluminum tubing Powdercoated heat shields help prevent hot air from entering the intake inlet Learn More
$199.99 ea.
Camaro Air Intake Kit, 4 inch, Single Inlet, LSX, Driver Side, With MAF, 1970-1981 Part # 33-10016
Air induction systems designed to fit your classic musclecar for a better than original equipment fit and finish Designed for applications where later model LS engines have been installed using a speed density computer system Designed for applications where later model LS engines have been installed using a blade style MAF Sensor Designed to give you the greatest horsepower and torque increase by routing the intake inlet away from heat souces like the radiator and headers Manufactured from high quality polished aluminum tubing Powdercoated heat shields help prevent hot air from entering the intake inlet Learn More
$219.99 ea.
Camaro Air Intake Kit, 4 inch, Single Inlet, LSX, Passenger Side, With MAF, 1970-1981 Part # 33-10021
Air induction systems designed to fit your classic musclecar for a better than original equipment fit and finish Designed for applications where later model LS engines have been installed using a speed density computer system Designed for applications where later model LS engines have been installed using a blade style MAF Sensor Designed to give you the greatest horsepower and torque increase by routing the intake inlet away from heat souces like the radiator and headers Manufactured from high quality polished aluminum tubing Powdercoated heat shields help prevent hot air from entering the intake inlet Learn More
$219.99 ea.
Camaro Air Intake Kit, 4 Inch, Single Inlet, LSX, Driver Side, With In-Boot MAF, 1970-1981 Part # 33-10026
Air induction systems designed to fit your classic musclecar for a better than original equipment fit and finish Designed for applications where later model LS engines have been installed using a speed density computer system Designed for applications where later model LS engines have been installed using a blade style MAF Sensor Designed to give you the greatest horsepower and torque increase by routing the intake inlet away from heat souces like the radiator and headers Manufactured from high quality polished aluminum tubing Powdercoated heat shields help prevent hot air from entering the intake inlet Learn More
$219.99 ea.
Camaro Air Intake Kit, 4 Inch, Single Inlet, LSX, Passenger Side, With In-Boot MAF, 1970-1981 Part # 33-10031
Air induction systems designed to fit your classic musclecar for a better than original equipment fit and finish Designed for applications where later model LS engines have been installed using a speed density computer system Designed for applications where later model LS engines have been installed using a blade style MAF Sensor Designed to give you the greatest horsepower and torque increase by routing the intake inlet away from heat souces like the radiator and headers Manufactured from high quality polished aluminum tubing Powdercoated heat shields help prevent hot air from entering the intake inlet Learn More
$219.99 ea.
Camaro Air Intake Kit, 4 inch, Single Plenum, 1970-1981 Part # 33-10036
Air induction systems designed to fit your classic musclecar for an original equipment like fit and finish Cast aluminum plenum design fits all carburetors and TBI throttle bodies with 5 1/8 In. inlet with many kits offering a low profile design for tight hood clearance applications Manufactured from high quality polished aluminum tubing, each system is designed to give you the greatest horsepower and torque increase by routing the intake inlet away from heat souces like the radiator and headers Learn More
$299.99 ea.
Camaro Air Intake Kit, 4 inch, Dual Plenum, 1970-1981 Part # 33-10041
Air induction systems designed to fit your classic musclecar for an original equipment like fit and finish Cast aluminum plenum design fits all carburetors and TBI throttle bodies with 5 1/8 In. inlet with many kits offering a low profile design for tight hood clearance applications Manufactured from high quality polished aluminum tubing, each system is designed to give you the greatest horsepower and torque increase by routing the intake inlet away from heat souces like the radiator and headers Learn More
$499.99 ea.
Camaro Air Intake Kit, 4 Inch, DTM Plenum, Dual Inlet, 1970-1981 Part # 33-10046
 4" Dual Inlet Designed To Fit Muscle Car For Better Fit & Finish Plenum Design Offers Extremely Low Profile Dimensions For Tight Hood Clearance Applications Fits All Carburetors & TBI Throttle Bodies With 5 1/8" Inlet (Always Check Hood Applications Beforehand) Designed To Give Greatest Horsepower & Torque Increase By Routing Intake Inlet Away From Heat Sources Like The Radiator & Headers Manufactured By Spectre Performance From High Quality Polished Aluminum Tubing Powdercoated Heat Shields Help Prevent Hot Air From Entering Intake Inlet Rick’s Camaros is happy to offer DTM plenum dual inlet air intake kits for your 1970-1981 Camaro. This four inch air intake kit is the best way to boost power and give your engine compartment a great look. Manufactured by Spectre Performance, this set can add as much as an additional 50HP through cool air sent to your F-Body’s engine. These systems use a DTM (“Down The Middle”) plenum design, which enables the most power to your engine. The aluminum plenum design offers low-profile dimensions for all tight clearance applications, and is designed to route the intake inlet away from heat sources in your engine. This Spectre set comes complete with all the necessary aluminum intake tubes, filters, boots, clamps, and other stainless steel mounting hardware. With the choice of red, blue, black, and white, you can personalize the air intake system for your special street car’s engine. Trust Rick’s Camaros for all of your restoration and replacement needs for your 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, or 1981 Camaro! Note: Requires 2-1/4” clearance from top of carburetor. Not legal in California on 1976-1981 models. Learn More
$499.99 ea.
Camaro Air Intake Kit, 4 Inch, Dual Inlet, LSX, Speed Density/In-Boot MAF, 1967-1969 Part # 33-10056
Air induction systems designed to fit your classic musclecar for a better than original equipment fit and finish Designed for applications where later model LS engines have been installed using a speed density computer system Designed to give you the greatest horsepower and torque increase by routing the intake inlet away from heat souces like the radiator and headers Manufactured from high quality polished aluminum tubing Powdercoated heat shields help prevent hot air from entering the intake inlet Learn More
$399.99 ea.
Camaro Air Intake Kit, 4 Inch, Single Inlet, Driver Side, Speed Density, 1967-1969 Part # 33-10061
Air induction systems designed to fit your classic musclecar for a better than original equipment fit and finish Designed for applications where later model LS engines have been installed using a speed density computer system Designed to give you the greatest horsepower and torque increase by routing the intake inlet away from heat souces like the radiator and headers Manufactured from high quality polished aluminum tubing Powdercoated heat shields help prevent hot air from entering the intake inlet Learn More
$199.99 ea.
Camaro Air Intake Kit, 4 Inch, Single Inlet, Passenger Side, Speed Density, 1967-1969 Part # 33-10066
Air induction systems designed to fit your classic musclecar for a better than original equipment fit and finish Designed for applications where later model LS engines have been installed using a speed density computer system Designed to give you the greatest horsepower and torque increase by routing the intake inlet away from heat souces like the radiator and headers Manufactured from high quality polished aluminum tubing Powdercoated heat shields help prevent hot air from entering the intake inlet Learn More
$199.99 ea.
Camaro Air Intake Kit, 4 inch, Single Inlet, LSX, Driver Side, With MAF, 1967-1969 Part # 33-10071
Air induction systems designed to fit your classic musclecar for a better than original equipment fit and finish Designed for applications where later model LS engines have been installed using a speed density computer system Designed for applications where later model LS engines have been installed using a blade style MAF Sensor Designed to give you the greatest horsepower and torque increase by routing the intake inlet away from heat souces like the radiator and headers Manufactured from high quality polished aluminum tubing Powdercoated heat shields help prevent hot air from entering the intake inlet Learn More
$219.99 ea.
Camaro Air Intake Kit, 4 inch, Single Inlet, LSX, Passenger Side, With MAF, 1967-1969 Part # 33-10076
Air induction systems designed to fit your classic musclecar for a better than original equipment fit and finish Designed for applications where later model LS engines have been installed using a speed density computer system Designed for applications where later model LS engines have been installed using a blade style MAF Sensor Designed to give you the greatest horsepower and torque increase by routing the intake inlet away from heat souces like the radiator and headers Manufactured from high quality polished aluminum tubing Powdercoated heat shields help prevent hot air from entering the intake inlet Learn More
$219.99 ea.
Camaro Air Intake Kit, 4 Inch, Single Inlet, LSX, Driver Side, With In-Boot MAF, 1967-1969 Part # 33-10081
Air induction systems designed to fit your classic musclecar for a better than original equipment fit and finish Designed for applications where later model LS engines have been installed using a speed density computer system Designed for applications where later model LS engines have been installed using a blade style MAF Sensor Designed to give you the greatest horsepower and torque increase by routing the intake inlet away from heat souces like the radiator and headers Manufactured from high quality polished aluminum tubing Powdercoated heat shields help prevent hot air from entering the intake inlet Learn More
$219.99 ea.
Camaro Air Intake Kit, 4 Inch, Single Inlet, LSX, Passenger Side, With In-Boot MAF, 1967-1969 Part # 33-10086
Air induction systems designed to fit your classic musclecar for a better than original equipment fit and finish Designed for applications where later model LS engines have been installed using a speed density computer system Designed for applications where later model LS engines have been installed using a blade style MAF Sensor Designed to give you the greatest horsepower and torque increase by routing the intake inlet away from heat souces like the radiator and headers Manufactured from high quality polished aluminum tubing Powdercoated heat shields help prevent hot air from entering the intake inlet Learn More
$219.99 ea.
Camaro Air Intake Kit, 4 inch, Single Plenum, 1967-1969 Part # 33-10091
Air induction systems designed to fit your classic musclecar for an original equipment like fit and finish Cast aluminum plenum design fits all carburetors and TBI throttle bodies with 5 1/8 In. inlet with many kits offering a low profile design for tight hood clearance applications Manufactured from high quality polished aluminum tubing, each system is designed to give you the greatest horsepower and torque increase by routing the intake inlet away from heat souces like the radiator and headers Learn More
$299.99 ea.
Camaro Air Intake Kit, 4 inch, Dual Plenum, 1967-1969 Part # 33-10096
Air induction systems designed to fit your classic musclecar for an original equipment like fit and finish Cast aluminum plenum design fits all carburetors and TBI throttle bodies with 5 1/8 In. inlet with many kits offering a low profile design for tight hood clearance applications Manufactured from high quality polished aluminum tubing, each system is designed to give you the greatest horsepower and torque increase by routing the intake inlet away from heat souces like the radiator and headers Learn More
$499.99 ea.
Camaro Air Intake Kit, 4 Inch, DTM Plenum, Dual Inlet, 1967-1969 Part # 33-10101
4" Dual Inlet Designed To Fit Muscle Car For Better Fit & Finish Plenum Design Offers Extremely Low Profile Dimensions For Tight Hood Clearance Applications Fits All Carburetors & TBI Throttle Bodies With 5 1/8" Inlet (Always Check Hood Applications Beforehand) Designed To Give Greatest Horsepower & Torque Increase By Routing Intake Inlet Away From Heat Sources Like The Radiator & Headers Manufactured By Spectre Performance From High Quality Polished Aluminum Tubing Powdercoated Heat Shields Help Prevent Hot Air From Entering Intake Inlet Rick’s Camaros is happy to offer DTM plenum dual inlet air intake kits for your 1967, 1968, or 1969 Camaro. This four inch air intake kit is the best way to boost power and give your engine compartment a great look. Manufactured by Spectre Performance, this set can add as much as an additional 50HP through cool air sent to your F-Body’s engine. These systems use a DTM (“Down The Middle”) plenum design, which enables the most power to your engine. The aluminum plenum design offers low-profile dimensions for all tight clearance applications, and is designed to route the intake inlet away from heat sources in your engine. This Spectre set comes complete with all the necessary aluminum intake tubes, filters, boots, clamps, and other stainless steel mounting hardware. With the choice of red, blue, black, and white, you can personalize the air intake system for your special street car’s engine. Trust Rick’s Camaros for all of your restoration and replacement needs for your 1967, 1968, or 1969 Camaro! Note: Requires 2-1/4” clearance from top of carburetor.      Learn More
$499.99 ea.
Items 1 to 24 of 27 total Show per page Page:
  1. 1
  2. 2
  3. Next Page
Grid  List 
1